Ballas pirkti naudotą (1 506)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Leipzig
872 km
Apdirbimo centras
CINCINNATI-MILACRONSabre 750
Skambinti
Būklė: naudotas, Gamybos metai: 1996, Technical Details:
X-axis travel: 762 mm
y-axis travel: 510 mm
z-axis travel: 560 mm
Control system: Heidenhain TNC 415 OR 360
Tool magazine: 21 stations
Table clamping surface: 865 x 510 mm
Table load capacity: 455 kg
Tool holder: SK40
Spindle speeds: 60 - 8,000 rpm
Feed rate X/Y/Z: 15,000 mm/min
Rapid traverse speed X/Y/Z: 24 m/min
Bjdju Idmvepfx Akujli
Compressed air requirement: 5.5 bar
Total power consumption: 30 kVA
Spindle motor power: 11.0 kW
Spindle torque: constant from 60 - 750 Nm
Machine weight approx.: 4.3 t
Machine dimensions (LxWxH) approx.: 2.6 x 2.8 x 2.6 m
Coolant unit dimensions (LxWxH): 2.7 x 0.8 x 0.8 m
Machining center with automatic tool changer
Internal coolant supply and coolant system with nozzle feed
Chip and coolant tray
Lubrication system via ball screws
Handheld control unit
Heidenhain TNC 415 – dialog or ISO mode (machining cycles: deep hole drilling, tapping, slot milling, rectangle and circular pocket milling, SL cycles), up to 100 programs can be managed
Machine can be inspected under power.
As is.
*
Mažas skelbimas
Vokietija
872 km
Suvirinimo diskas
MÜLLERMO-DT 20.000
Skambinti
Būklė: naudotas, Gamybos metai: 2006, Technical Details:
Table load capacity: 2.2 t
Table diameter: 2,500 mm
Total power requirement: 9.6 kW
Max. table load: 22,000 daN / 2,200 kg
Table rotation: left/right degrees
Table tiltable: 0 - 120 degrees
Table height: 1,700 mm
Approx. machine weight: 12,000 kg
Connected load: approx. 5.0 kVA
Dimensions L x W x H: approx. 4.5 x 2.5 x 2.3 m
Welding positioner tilt-rotate table developed and manufactured by Müller Opladen ARC KON EWeding GmbH.
Robust machine frame, welded steel construction with ball-bearing supported tilting mechanism.
Table equipped with centering grooves and T-slots for M24 according to DIN 650.
Continuously variable rotary drive from 0.05 - 1.0 rpm.
Height to center of swivel axis: 1,700 mm
Hydraulic tilt adjustment, continuously variable from 0 to 120°
Bljdpfx Akju Nkx Ieuei
Drive designed for a rotary torque at the turntable of approx. 40,000 Nm
Accessories:
1x double-row foot switch
1x remote control
1x working platform
Mažas skelbimas
Vokietija
872 km
Apdirbimo centrai - vertikalūs
RödersRFM 760/S 4-axis
Skambinti
Būklė: naudotas, Gamybos metai: 1998, Technical details:
X travel: 760 mm
Y travel: 550 mm
Z travel: 300 mm
Control: Röders RMS 6 Version 2.70
Spindle taper ISO: HSK E40
Speed range: 42,000 rpm, stepless
Spindle head swiveling left/right: -52° / +5° (B-axis)
Feed rate: 0 - 30,000 mm/min
Tool changer: 18 tools + 2 positions for tool measurement
Table size: 860 x 550 mm
Table load capacity: 800 kp
Operating hours: see photo (h)
Compressed air: 6.5 bar
Total power consumption: 20 kW
Approx. weight: 7,000 kg
Machine dimensions (LxWxH approx.): 3.1 x 2.4 x 2.6 m
Chiller dimensions approx.: 0.6 x 0.8 x 0.7 m
Additional features:
- High-speed direct spindle
- Digital axis drive AC servo motors
- Ball screw drive
- Spray cooling (Microjet coolant and lubrication system)
- Work spindle Fischer MFW - 1230/42 up to 42,000 rpm
Bedpfx Aeu Ndbpskusli
- Tool measurement laser and probe system PS 25.00
- Handheld control device
- Climate control cabinet
- Cooling water recirculator Hyfra
The machine can be demonstrated under power.

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Vokietija
872 km
Apdirbimo centras - vertikalus
ALZMETALLCS1200/3
Skambinti
Būklė: naudotas, Gamybos metai: 2007, Technical Details:
X-axis travel: 1200 mm
y-axis travel: 600 mm
z-axis travel: 800 mm
Distance spindle / table: 125 / 925 mm
Control: Heidenhain iTNC 530
Spindle speed: 9000 stepless rpm
Torque at spindle: max. 82 Nm
Power-on hours: 43,363 h
Spindle operating hours: 16,319 h
Tool magazine with: 24 slots
Table size: 1250 x 630 mm (cross-slide table)
Max. table load: 1000 kg
Spindle taper: SK40
Spindle motor: 13 kW
Feed rate: X/Y/Z: 40/40/30 m/min
Rapid traverse: X/Y/Z: 40/40/30 m/min
Feed force: X/Y/Z: 7/7/16 kN
Interface: yes
Total power requirement: 13 kW
Machine weight approx.: 8.0 t
Coolant unit dimensions: approx. L: 1.25 x W: 0.7 x H: 1.56 m
Machine dimensions approx. LxWxH: 2.4 x 3.0 x 3.3 m
Main spindle: Spindle head DIN 69871, SK 40/DIN 69 871-A40 and pull stud DIN 69872
Drive technology via ball screw drive
Equipment:
- Compact filter/high-pressure coolant system Knoll
- Chip conveyor/scraper belt conveyor 300 mm
- Tool changer unit with disc magazine for 24 tools
- Electronic handwheel
- Operation via Heidenhain control panel
Bledpfsvithzex Akuei
Accessories:
- AL plate 1200x600x45 mm with Ø 15 mm bores
Mažas skelbimas
Leipzig
872 km
Gilių skylių gręžimo ir frezavimo staklės
Emsil groupNarwhal
Skambinti
Būklė: naujas, This is a new machine manufactured in Romania by Emsil.
Customer requirements can be considered and implemented depending on technical feasibility, and are reviewed in advance by the manufacturer's engineering office.
Bledpju Id H Asfx Akusi
Spindles:
The Narwhal is equipped with a boring spindle made of hardened, tempered, and alloyed steel. It is mounted with preloaded angular precision ball bearings.
Additionally, the machine features a milling and boring bar capable of handling exceptional performance and torque. The bar is made from nitrided, alloyed steel and is also equipped with angular preloaded precision ball bearings. It moves on bronze guide bushings.
The clamping devices of both units, used for fixing and releasing the tool holding taper with ISO 50 coupling, operate automatically to open and close.
Rotary Table:
Table rotation is achieved via a dual pinion gear system, a centrally supported shaft, and a hydrostatic sliding block on the center bearing, all dimensioned for maximum precision—even under heavy or unbalanced loads.
A ball screw drive is used for the X-axes. Both axes are equipped with direct position measurement systems.
CNC Axis Control:
All 9 axes of the machine are continuously monitored. The monitoring system includes a 15'' TFT display, an operator panel, remote diagnostics that alert users in case of faults, user memory, network connectivity, remote process control, integrated PLC, and more.
The machine is compatible with various control systems such as Heidenhain, Fanuc, or Siemens.
You can select the machining envelope for the X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500 mm, according to your requirements!
Best regards,
i.D.
Mažas skelbimas
Leipzig
872 km
Vožtuvai, sklendės
Econosto,Valvecom,DiverseDiverse
Skambinti
Būklė: naudotas, Valves, slides (or sluice gates), butterfly valves, ball valves, safety valves
Bljdpfjtunb Aex Akuji
Mažas skelbimas
Vokietija
872 km
Hidraulinės giljotininės žirklės
AtlanticAT SLX 4016
Skambinti
Būklė: naudotas, Gamybos metai: 1992, Technical details:
Bsdpfx Aou Icpcjkuoli
Sheet width: 4050 mm
Sheet thickness: 16 mm
Frame gap: 4900 mm
CNC controller: Robosoft SC5 Controller
Backgauge: 1000 mm, motorized
Cutting angle: 0.5° - 3°
Blade gap adjustment: yes / adjustable in mm
Hold-downs: 23 pcs
Height above floor: 1030 mm
Table size (L x W): 4000 x 520 mm
Machine weight approx.: 19.2 t
Machine dimensions: 5.2 x 2.2 x 2.78 m
Additional features:
- Blade length: 4100 mm, can be rotated 4 times
- Strokes per minute: 5 - 11
- Table: side stop with linear scale, removable stop bar 1000 mm, ball transfer assist
- Front support: L x W x H: 1600 x 1100 x 1000 mm, movable on roller rail for easy handling
- Backgauge adjustable, motorized and foldable
Operation via control panel with pendant arm and foot pedal
Equipment:
- Light curtain at the backgauge
- Cutting line illumination
Accessories:
- 1 set (2 pieces) of shear blades
Mažas skelbimas
Austrija
945 km
Lenkimo presas
HESSE by DURMAAD-EB 2580
Skambinti
Būklė: naujas, Condition: New
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €102,300
Leasing rate: €1,933.47
Press force: 80 tons
Bending length: 2,550 mm
Axes: 4
Stroke: 320 mm
Distance between uprights: 2,840 mm
Installation height: 500 mm
Drive concept: Servo-motor belt drive
Rapid traverse Y-axis: 105 mm/s
Working speed Y-axis: 10 mm/s
Return speed Y-axis: 105 mm/s
Backgauge travel X-axis: 650 mm
Backgauge travel R-axis: 250 mm
Length: 3,700 mm
Bljdpfx Aksynndfsusi
Width: 2,200 mm
Height: 2,550 mm
Weight: 6,400 kg
Servo-motor driven system
Transmission via multi-redirected flat belt
4 axes (Y1, Y2, X, R)
CNC CONTROL: DELEM DA-66S
- 2D graphic display 17”
- 3D visualization for simulation and production
- Intuitive touch-screen operation (easy drawing of bending contours with finger)
- Simple and convenient data transfer
- Multi-simulation capability
- User-friendly dialog-based programming
- Graphic simulation of the bending sequence
Servo-driven backgauge on linear guides and ball screws
Backgauge finger blocks on double linear guides
Intermediate sections for upper tool clamping
Upper tool 1010/A/75°/0.8/105, segmented, bending radius hardened and ground
Die holder for 60 mm dies
Die 2009/85° (V 16, 22, 35, 50 mm), segmented, entry radii hardened and ground
Light curtain safety device BLVT
Sheet support arms on linear guide
Side and rear safety guards
Equipment according to CE regulations
Operating manual in GERMAN or ENGLISH
ADVANTAGES OF THIS DESIGN:
- No reduction of working width due to side frames; distance between uprights is greater than bending length
- Up to 30% higher productivity compared to conventional hydraulic press brakes due to almost immediate response to pedal signal
- Minimal frame deflection
- No crowning system required as bending force is applied over multiple points along the bending length
- High repeatability and bending accuracy across the full bending length
- Low energy consumption
- No hydraulic components
Options:
CNC controller DELEM DA-69S 3D incl. PC software Profile-S with option to import 3D files
Mažas skelbimas
Austrija
945 km
Lenkimo presas
HESSE by DURMAAD-Servo 40320
Skambinti
Būklė: naujas, Condition: new
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €159,300
Leasing rate: €3,010.77
Press force: 320 tons
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axes
Stroke: 365 mm
Distance between uprights: 3600 mm
Side frame throat depth: 410 mm
Installation height: 630 mm
Drive system: hydraulic
Rapid traverse Y-axis: 160 mm/s
Working speed Y-axis: 10 mm/s
Return speed Y-axis: 160 mm/s
Backgauge travel X-axis: 650 mm
Backgauge speed X-axis: 500 mm/s
Backgauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Length: 5300 mm
Width: 1910 mm
Height: 3230 mm
Weight: 20,100 kg
ONE SERVOMOTOR AND PUMP PER CYLINDER
4 axes (Y1, Y2, X, and R)
CNC CONTROL SKY 22
- Full HD graphics display 21.5" with 2D and 3D visualization of the programmed workpiece
- Intuitive touch screen operation (easy drawing of bend contours with finger)
- User-friendly dialog programming in either 2D or 3D mode
- 2D and 3D simulation of the bending process
- Automatic tool selection in 3D mode
- Automatic calculation of flat length for sheet metal blank
- Automatic calculation of bending sequence
- Graphical product and tool library
- Correction possibility
- USB ports and Ethernet connection for import, backup, and program outsourcing
- Operating system: Windows
- Import support for IGES, STEP, DXF files
Servo-driven backgauge on linear guides and ball screw spindles
Backgauge finger blocks on double linear guides
CNC-controlled crowning
Upper tool 1010/A/75°, sectionalized and offset
4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm)
Fiessler AKAS laser protection mounted on the upper beam
Sheet supports on linear guides
Blodpfxjynm Atj Akuoi
Equipment according to CE regulations
Filled with hydraulic oil
Operating manual in GERMAN or ENGLISH
ADVANTAGES OF THIS DESIGN:
- Hydraulics run only during upper beam movement
- Low energy consumption
- Low noise emission
- High speed
Options:
- Z1/Z2 axes
- CNC control Delem DA-66 S
- CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability
Mažas skelbimas
Austrija
945 km
Lenkimo presas
HESSE by DURMAAD-ES 2040
Skambinti
Būklė: naujas, Condition: new
Delivery time: approx. 12 – 14 weeks from order
Country of origin: Turkey
Price: €74,800
Leasing rate: €1,413.72
Pressing force: 40 t
Bending length: 2050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 200 mm
Distance between uprights: 1700 mm
Throat depth (side frame): 350 mm
Installation height: 440 mm
Drive concept: servomotor-driven spindle
Rapid traverse Y-axis: 180 mm/s
Working speed Y-axis: 10 mm/s
Return speed Y-axis: 115 mm/s
Backgauge travel X-axis: 650 mm
Backgauge travel R-axis: 250 mm
Table height: 1000 mm
Motor power: 7.2 kW
Length: 2600 mm
Width: 1450 mm
Height: 2650 mm
Weight: 4400 kg
STANDARD EQUIPMENT:
- Servomotor-driven spindle drive
- 4 axes (Y1, Y2, X and R)
- DELEM DA-66S color graphic control
- 17" color touchscreen
- 3D visualization for simulation and production
- Suitable for full Windows applications
- Compatible with DelemModusys
- USB and peripheral interface
- User-specific application support
- Sensor, bending, and correction interface
- Servomotor-driven backgauge on linear guides and ball screws
- CNC-controlled crowning
- Upper tool 1010/A/75°, segmented and offset
- 4-way die block 60x60 2009 (V = 16, 22, 35, and 50 mm)
- Laser safety device Fiessler AKAS mounted on the upper beam
- Sheet support arms on linear guides
- Equipment compliant with CE regulations
- Operating manual in GERMAN or ENGLISH
Bjdpfsynm A Hox Akuoli
ADVANTAGES OF THIS DESIGN:
- Higher productivity than conventional hydraulic press brakes due to virtually delay-free response to the foot pedal signal
- Low energy consumption
- Compact spindle drive unit with a low number of individual components
- No hydraulic components
Options:
- Z1/Z2 axes
- CNC controller DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability
- Quick-clamping lever for the upper tool
Mažas skelbimas
Austrija
945 km
Lenkimo presas
HESSE by DURMAAD-Servo 40600
Skambinti
Būklė: naujas, Condition: new
Delivery time: approx. 14 – 16 weeks from order
Country of origin: Turkey
Price: €252,800
Pressing force: 600 t
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axes
Stroke: 365 mm
Distance between uprights: 3100 mm
Throat depth (in side frames): 410 mm
Blsdpfx Akoynmxnsusi
Installation height: 700 mm
Drive system: hydraulic
Rapid traverse Y-axis: 160 mm/s
Working speed Y-axis: 10 mm/s
Return speed Y-axis: 160 mm/s
Backgauge travel X-axis: 650 mm
Backgauge speed X-axis: 500 mm/s
Backgauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oil tank: 280 l
Length: 5750 mm
Width: 2500 mm
Height: 4000 mm
Weight: 40,500 kg
ONE SERVO MOTOR AND PUMP PER CYLINDER
4 axes (Y1, Y2, X and R)
CNC CONTROL SKY 22
- Full HD graphic display 21.5" with 2D and 3D visualization of the programmed workpiece
- Intuitive touch-screen operation (easy contour drawing by finger)
- User-friendly conversational programming selectable in 2D or 3D mode
- 2D and 3D bending sequence simulation
- Automatic tool selection in 3D mode
- Automatic calculation of developed length for sheet blank
- Automatic bend sequence calculation
- Graphical product and tool memory
- Correction functions
- USB ports and Ethernet connection for import, backup, and program transfer
- Windows operating system
- Supports import of IGES, STEP, DXF files
Servo-driven backgauge on linear guides and ball screws
Backgauge finger blocks on double linear guides
CNC-controlled crowning
Upper tool 1010/A/75°, segmented and offset
4-way die block 60x60 2009 (V= 16, 22, 35 and 50 mm)
Laser safety device Fiessler AKAS mounted on the upper beam
Sheet support arms on linear guides
Equipment according to CE regulations
Oil filling
Operating manual in GERMAN or ENGLISH
ADVANTAGES OF THIS DESIGN:
- Hydraulics operate only during upper beam movement
- Low energy consumption
- Low noise
- High speed
PRICE FCA TURKEY
Options:
- CNC Control Delem DA-66S
- CNC Control Delem DA-69S 3D incl. PC software Profile-S with 3D file import capability
Mažas skelbimas
Austrija
945 km
Lenkimo presas
HESSE by DURMAAD-Servo 40400
Skambinti
Būklė: naujas, Condition: new
Delivery time: approx. 12-14 weeks from order
Country of origin: Turkey
Price: €187,100
Leasing rate: €3,536.19
Pressing force: 400 t
Bending length: 4,050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 365 mm
Distance between uprights: 3,400 mm
Throat depth: 410 mm
Installation height: 630 mm
Drive concept: hydraulic
Rapid traverse Y-axis: 160 mm/s
Working speed Y-axis: 10 mm/s
Return speed Y-axis: 160 mm/s
Backgauge travel X-axis: 650 mm
Backgauge speed X-axis: 500 mm/s
Backgauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Motor: 2 x 11 kW
Length: 5,750 mm
Width: 2,110 mm
Height: 3,450 mm
Weight: 27,780 kg
ONE SERVO MOTOR AND PUMP PER CYLINDER
4 axes (Y1, Y2, X, and R)
CNC CONTROL SKY 22
- Full HD graphic display 21.5” with 2D and 3D representation of the programmed workpiece
- Intuitive touch screen operation (easy contour drawing with your finger)
- User-friendly dialogue-based programming, optional in 2D or 3D mode
- 2D and 3D simulation of the bending process
- Automatic tool selection in 3D mode
- Automatic calculation of flat length for sheet cutting
- Automatic bending sequence calculation
- Graphical product and tool memory
- Correction options
- USB ports and Ethernet port for import, backup, and program outsourcing
- Windows operating system
- Import support for IGES, STEP, DXF files
Servo-motor driven backgauge on linear guides and ball screws
Backgauge finger blocks on dual linear guides
CNC-controlled crowning
Upper tool 1010/A/75°, segmented and offset
4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm)
Bljdpfxewir A As Akuji
Laser safety device Fiessler AKAS mounted on upper beam
Sheet support arms on linear guide
Equipment per CE regulations
Pre-filled with oil
Operating manual in GERMAN or ENGLISH
ADVANTAGES OF THIS DESIGN:
- the hydraulics operate only during upper beam movement
- low energy consumption
- low noise emission
- high speed
PRICE FCA TURKEY
Options:
– CNC control Delem DA-66 S
– CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability
Mažas skelbimas
Austrija
945 km
Lenkimo presas
HESSE by DURMAAD-Servo 60400
Skambinti
Būklė: naujas, Condition: New
Delivery time: approx. 4-6 months after order
Country of origin: Turkey
Price: €231,900
Press force: 400 t
Bending length: 6050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 365 mm
Distance between uprights: 5100 mm
Throat depth in side frame: 510 mm
Installation height: 630 mm
Drive system: hydraulic
Rapid traverse Y-axis: 150 mm/s
Bjdpewir Avjfx Akujli
Working speed Y-axis: 9 mm/s
Return speed Y-axis: 150 mm/s
Backgauge travel X-axis: 750 mm
Oil tank: 160 l
Length: 7500 mm
Width: 2110 mm
Height: 3810 mm
Weight: 34,600 kg
ONE SERVOMOTOR AND PUMP PER CYLINDER
4 axes (Y1, Y2, X, and R)
CNC CONTROL SKY 22
- Full HD graphics display 21.5" with 2D and 3D visualization of the programmed workpiece
- Intuitive touch-screen operation (simple drawing of the bending contour with your finger)
- User-friendly dialog-based programming in 2D or 3D mode
- 2D and 3D simulation of the bending process
- Automatic tool selection in 3D mode
- Automatic calculation of the developed length for sheet metal blank
- Automatic bending sequence calculation
- Graphical product and tool memory
- Correction option
- USB ports and Ethernet for import, backup, and program export
- Windows operating system
- Import support for IGES, STEP, DXF files
Servo-driven backgauge on linear guides and ball screws
Backgauge finger blocks on double linear guides
CNC-controlled crowning
Upper tool 1010/A/75°, sectional and offset
4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm)
Fiessler AKAS laser safety device mounted on upper beam
Sheet support arms on linear guides
Equipment according to CE regulations
Oil filling
Operating manual in GERMAN or ENGLISH
ADVANTAGES OF THIS DESIGN:
- Hydraulics operate only during upper beam movement
- Low energy consumption
- Low noise emissions
- High speed
PRICE FCA TURKEY
Options:
CNC control Delem DA-66 S
CNC control DELEM DA-69S 3D including PC software Profile-S with 3D file import capability
Mažas skelbimas
Austrija
945 km
Lenkimo presas
HESSE by DURMAAD-Servo 30135
Skambinti
Būklė: naujas, Condition: New
Delivery time: approx. 12–14 weeks from order
Country of origin: Turkey
Price: €98,300
Leasing rate: €1,857.87
Press force: 135 t
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axes
Stroke: 265 mm
Distance between frames: 2600 mm
Throat depth (side frame): 410 mm
Installation height: 530 mm
Drive concept: hydraulic
Bljdowirr Ropfx Akuei
Rapid traverse Y-axis: 200 mm/s
Working speed Y-axis: 10 mm/s
Return speed Y-axis: 200 mm/s
Backgauge travel X-axis: 650 mm
Backgauge speed X-axis: 500 mm/s
Backgauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Length: 4200 mm
Width: 1680 mm
Height: 2750 mm
Weight: 9500 kg
SEPARATE SERVO MOTOR AND PUMP PER CYLINDER
4 axes (Y1, Y2, X, and R)
CNC CONTROL SKY 22
- Full HD graphic display 21.5" with 2D and 3D visualization of the programmed workpiece
- Intuitive touch-screen operation (simple bend contour drawing with your finger)
- User-friendly conversational programming in either 2D or 3D mode
- 2D and 3D simulation of the bending process
- Automatic tool selection in 3D mode
- Automatic calculation of blank length for sheet metal
- Automatic bend sequence calculation
- Graphical product and tool memory
- Correction capability
- USB ports and Ethernet connection for import, backup, and program export
- Windows operating system
- IGES, STEP, DXF file import supported
Servo-motor driven backgauge running on linear guides and ball screws
Backgauge fingers on double linear guides
CNC-controlled crowning
Upper tool: 1010/A/75°, segmented and offset
4-V die block 60x60 2009 (V = 16, 22, 35 and 50 mm)
Fiessler AKAS laser safety device mounted on the upper beam
Sheet support arms on linear guides
Equipped according to CE regulations
Oil filling included
Operating manual in GERMAN or ENGLISH
ADVANTAGES OF THIS DESIGN:
- Hydraulics only run during upper beam movement
- Low energy consumption
- Low noise emission
- High speed
Options:
Z1/Z2 axes
CNC control Delem DA-66 S
CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability
Quick-release clamping levers for the upper tool
Mažas skelbimas
Austrija
945 km
Lenkimo presas
HESSE by DURMAAD-S 2060
Skambinti
Būklė: naujas, Condition: New
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €57,920
Leasing rate: €1,094.69
Pressing force: 60 t
Bending length: 2,050 mm
Axes: 3 (Y1, Y2, X)
Stroke: 265 mm
Distance between uprights: 1,700 mm
Throat depth in side frame: 450 mm
Installation height: 530 mm
Drive system: hydraulic
Rapid traverse Y-axis: 200 mm/s
Working speed Y-axis: 10 mm/s
Return speed Y-axis: 110 mm/s
Backgauge travel range X-axis: 650 mm
Backgauge speed X-axis: 500 mm/s
Backgauge speed R-axis: 350 mm/s
Backgauge travel range R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oil tank: 100 l
Motor: 7.5 kW
Length: 3,200 mm
Width: 1,550 mm
Height: 2,850 mm
Weight: 5,600 kg
Backgauge: 650 mm
3 Axes (Y1, Y2, X)
CNC CONTROL DT-15
- 2D graphic display 15"
- Intuitive touch-screen operation (easy contour drawing by finger)
- User-friendly dialog programming
- Automatic bend sequence calculation
- Automatic calculation of flat length for sheet blank
- Graphical product and tool memory
- Correction possibility
- USB ports for backup and program transfer
- PC software: Programs can be written on PC and transferred to the machine via USB
Servo-driven backgauge on linear guides and ball screws
Backgauge finger blocks on double linear guides
CNC-controlled crowning
Upper tool 1010/A/75°, segmented and offset
4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm)
Laser safety device Fiessler AKAS mounted on upper beam
Sheet support arms on linear guides
Equipment in compliance with CE regulations
Filled with oil
Operating manual in GERMAN or ENGLISH
ADVANTAGES OF THE AD-S SERIES:
- Increased stroke, installation height, and throat depth
- Higher approach and return speed of the upper beam
- Higher backgauge speed
- Backgauge fingers on double instead of single linear guides
- More options available, such as additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls …
Bjdpfx Ajwirivjkueli
OPTIONS:
R-axis
R/Z1/Z2 axes
DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import)
CNC control SKY22
CNC control Delem DA66 S
CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability
Quick-clamping levers for the upper tool
Mažas skelbimas
Austrija
945 km
Lenkimo presas
HESSE by DURMAAD-Servo 60320
Skambinti
Būklė: naujas, Condition: New
Delivery time: approx. 14–16 weeks from order
Country of origin: Turkey
Price: €202,100
Leasing rate: €3,869.08
Pressing force: 320 t
Bending length: 6050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 365 mm
Distance between frames: 5100 mm
Throat depth (side frame): 450 mm
Installation height: 630 mm
Drive concept: hydraulic
Rapid traverse Y-axis: 160 mm/s
Working speed Y-axis: 10 mm/s
Return speed Y-axis: 160 mm/s
Backgauge travel X-axis: 650 mm
Backgauge speed X-axis: 500 mm/s
Backgauge travel R-axis: 250 mm
Table height: 1100 mm
Table width: 154 mm
Oil tank: 160 l
Length: 7500 mm
Width: 1910 mm
Height: 3350 mm
Weight: 29,000 kg
ONE SERVO MOTOR AND PUMP PER CYLINDER
4 axes (Y1, Y2, X, and R)
CNC CONTROL SKY 22
- Full HD graphic display 21.5" with 2D and 3D visualization of programmed workpiece
- Intuitive touch-screen operation (easily draw bend contours with your finger)
- User-friendly dialogue-based programming in either 2D or 3D mode
- 2D and 3D simulation of the bending sequence
- Automatic tool selection in 3D mode
- Automatic calculation of developed length for sheet cutting
- Automatic bending sequence calculation
- Graphical product and tool memory
- Correction options
- USB and Ethernet ports for import, backup, and program outsourcing
- Windows operating system
- Import support for IGES, STEP, DXF files
Servo-motor driven backgauge on linear guides and ball screws
Backgauge finger blocks on dual linear guides
CNC-controlled crowning
Top tool 1010/A/75°, segmented and offset
4-way die block 60x60 2009 (V = 16, 22, 35, and 50 mm)
Laser safety system Fiessler AKAS mounted on upper beam
Sheet support arms on linear guides
Equipment according to CE regulations
Oil fill included
Operating manual in GERMAN or ENGLISH
ADVANTAGES OF THIS DESIGN:
- Hydraulic system operates only during upper beam movement
Blodpfx Ajwirgnokuji
- Low energy consumption
- Low noise emission
- High speed
PRICE FCA TURKEY
Options:
- CNC control Delem DA-66 S
- CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability
Mažas skelbimas
Austrija
945 km
Paspauskite stabdį - hidraulinis
HESSE by DURMAPBF 40160
Skambinti
Būklė: naujas, Condition: new
Delivery time: approx. 12 - 14 weeks from order
Country of origin: Turkey
Price: €76,820
Leasing rate: €1,451.90
Press force: 160 tons
Bending length: 4050 mm
Axes: Y1 / Y2 and X axis
Stroke: 200 mm
Distance between uprights: 3600 mm
Throat depth in side frame: 300 mm
Installation height: 430 mm
Drive system: hydraulic
Rapid traverse Y-axis: 160 mm/s
Working speed Y-axis: 10 mm/s
Return speed Y-axis: 140 mm/s
Back gauge travel distance X-axis: 620 mm
Back gauge speed X-axis: 250 mm/s
Table height: 858 mm
Table width: 104 mm
Motor power: 15 kW
Length: 4850 mm
Width: 1900 mm
Height: 2610 mm
Weight: 10,500 kg
3 axes (Y1, Y2, and X axis)
CNC CONTROL DT-10
- 2D graphic display 10”
- Intuitive touch screen operation (easy bending contour drawing with finger)
- Operator-friendly dialog-based programming
- Automatic bending sequence calculation
- Automatic calculation of the unfolded length for sheet cutting
- Graphical product and tool memory
- Correction options
- USB ports for backup and program transfer
- PC software for offline program creation, transfer to machine via USB
CNC-controlled back gauge with linear guide and ball screw
CNC-controlled crowning system
Intermediates for upper tool clamping
Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground
Die holder for 60 mm dies
Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radius hardened and ground
Fiessler AKAS laser safety device mounted on upper beam
Sheet support arms
Side and rear safety guards
Equipment in accordance with CE regulations
Filled with oil
Bsdpfxowird Ho Akujli
Operating manual in GERMAN or ENGLISH
ADVANTAGES OF THE PBF SERIES:
- Compact design
- Cost-effective model due to series production of standardized models without compromising quality and precision
OPTION:
CNC-controlled R-axis (X range = 500 mm)
DBend, 3D CAD/CAM import and simulation software (import of step, iges, and dxf files)
WE HAVE MORE THAN 600 REFERENCES!
Mažas skelbimas
Austrija
945 km
Lenkimo presas
HESSE by DURMAAD-S 40320
Skambinti
Būklė: naujas, Condition: new
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €123,713
Leasing rate: €2,338.18
Press force: 320 tons
Bending length: 4,050 mm
Axes: Y1 / Y2 / X axis
Stroke: 365 mm
Frame gap: 3,600 mm
Throat depth (side frame): 450 mm
Installation height: 630 mm
Drive system: hydraulic
Rapid traverse Y-axis: 160 mm/s
Working speed Y-axis: 10 mm/s
Return speed Y-axis: 140 mm/s
Backgauge speed X-axis: 500 mm/s
Backgauge speed R-axis: 350 mm/s
Backgauge travel (R-axis): 250 mm
Table height: 900 mm
Table width: 154 mm
Oil tank: 250 l
Motor power: 18.5 kW
Length: 5,250 mm
Width: 1,770 mm
Height: 2,850 mm
Weight: 20,000 kg
Standard Equipment:
- 3 axes (Y1, Y2, X)
- CNC CONTROLLER DT-15
- 2D graphic display 15”
- Intuitive touch-screen operation (simple contour drawing by finger)
- User-friendly dialog-based programming
- Automatic bending sequence calculation
- Automatic unfolded length calculation for sheet metal blanking
- Graphical product and tool memory
- Correction function
- USB ports for backup and program export
- PC software for programming at PC with transfer via USB
- Servo-driven backgauge on linear guides and ball screws
- Backgauge finger blocks on double linear guides
- CNC-controlled crowning
- Upper tool 1010/A/75°, sectionalized and offset
- 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm)
- Laser safety device Fiessler AKAS mounted on upper beam
- Sheet support arms on linear guide
- Equipment according to CE regulations
- Oil fill
- Operating manual in GERMAN or ENGLISH
ADVANTAGES OF THE AD-S:
- Increased stroke, installation height, and throat depth
- Higher approach and return speed of upper beam
- Increased backgauge speed
- Backgauge finger on double instead of single linear guide
- More options available, e.g.: additional backgauge axes (such as Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem operation, different CNC controllers …
Options:
- R-axis
Bsdpewirfqefx Akuoli
- R/Z1/Z2 axes
- DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import)
- CNC controller SKY22
- CNC controller Delem DA66 S
- CNC controller DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability
Mažas skelbimas
Austrija
945 km
Lenkimo presas
HESSE by DURMAAD-S 60220
Skambinti
Būklė: naujas, Condition: New
Delivery time: approx. 14 - 16 weeks from order
Country of origin: Turkey
Price: €137,900
Leasing rate: €2,606.31
Press force: 220 tons
Bending length: 6050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Distance between side frames: 5100 mm
Throat depth: 450 mm
Installation height: 530 mm
Drive system: hydraulic
Rapid approach speed Y-axis: 160 mm/s
Working speed Y-axis: 10 mm/s
Return speed Y-axis: 140 mm/s
Backgauge speed X-axis: 500 mm/s
Backgauge speed R-axis: 350 mm/s
Backgauge travel R-axis: 250 mm
Table height: 1050 mm
Table width: 154 mm
Oil tank: 250 l
Motor: 22 kW
Length: 7500 mm
Width: 1770 mm
Height: 3350 mm
Bedpfx Ajwiq R Sskuoli
Weight: 20,800 kg
3 axes (Y1, Y2, X)
CNC CONTROL DT-15
- 15" 2D graphic display
- Intuitive touch screen operation (easy bending contour drawing with your finger)
- User-friendly dialog-based programming
- Automatic bending sequence calculation
- Automatic calculation of flat length for sheet cutting
- Graphic product and tool memory
- Correction function
- USB ports for backup and program transfer
- PC software to create programs on PC and transfer them to the machine via USB
Servo-driven backgauge on linear guides and ball screws
Backgauge finger blocks mounted on double linear guides
CNC-controlled crowning system
Upper tool 1010/A/75°, segmented and offset
4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm)
Fiessler AKASam laser safety device mounted on upper beam
Sheet support arms on linear guides
CE compliant equipment
Oil filled
Operating manual in GERMAN or ENGLISH
ADVANTAGES OF THE AD-S:
- Increased stroke, installation height, and throat depth
- Higher approach and return speed of the upper beam
- Higher backgauge speed
- Backgauge fingers on double, not single, linear guides
- More options available, e.g.: additional backgauge axes (Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem version, different CNC controls…
PRICE FCA TURKEY
Options:
R-axis
R/Z1/Z2-axis
DBend 3D CAD/CAM import and simulation software (import of step, iges, and dxf files)
CNC control SKY22
CNC control Delem DA66 S
DA-69S 3D incl. PC Software Profile-S with 3D file import capability
Quick-release lever for upper tool
Mažas skelbimas
Austrija
945 km
Lenkimo presas
HESSE by DURMAAD-S 30220
Skambinti
Būklė: naujas, Condition: New
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €88,113
Leasing rate: €1,665.34
Pressing force: 220 tons
Bending length: 3,050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Distance between uprights: 2,600 mm
Throat depth: 450 mm
Installation height: 530 mm
Drive system: hydraulic
Rapid traverse Y-axis: 140 mm/s
Working speed Y-axis: 10 mm/s
Return speed Y-axis: 140 mm/s
Backgauge speed X-axis: 500 mm/s
Backgauge speed R-axis: 350 mm/s
Backgauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oil tank: 250 l
Motor power: 22 kW
Length: 4,250 mm
Width: 1,770 mm
Blodpfxewiqudj Akuei
Height: 3,000 mm
Weight: 12,600 kg
Standard equipment:
- 3 axes (Y1, Y2, X)
- CNC Control DT-15
- 15" 2D graphical display
- Intuitive touch-screen operation (easy drawing of bending contour with finger)
- User-friendly dialog-based programming
- Automatic bending sequence calculation
- Automatic calculation of flat length for sheet cutting
- Graphical product and tool memory
- Correction option
- USB ports for backup and program transfer
- PC software allows programming on PC with transfer to machine via USB
- Servo-driven backgauge on linear guides and ball screws
- Backgauge finger blocks on double linear guides
- CNC-controlled crowning
- Upper tool 1010/A/75°, segmented and offset
- 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm)
- Fiessler AKAS laser guard mounted on upper beam
- Sheet support arms on linear guides
- Equipment according to CE regulations
- Oil filling
- Operating manual in GERMAN or ENGLISH
ADVANTAGES OF THE AD-S:
- Greater stroke, installation height, and throat depth
- Higher approach and return speed of the upper beam
- Faster backgauge speeds
- Backgauge fingers on double instead of single linear guides
- More options available such as additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem version, other CNC controls, etc.
OPTIONS:
- R-axis
- R/Z1/Z2 axes
- CNC control Delem DA66 S
- CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability
- Hydraulic or pneumatic tool clamping for Euro or Wila tools
Mažas skelbimas
Würzburg
1 113 km
įstrižasis padavimas, išmetėjas, įvediklis...
Transnorm45°/90°-900-800
Skambinti
Būklė: naudotas, Gamybos metai: 2008, Transnorm Angled Infeed/Divert/Insert Roller Junction 45°/90°-900-800
RA2236
Year of manufacture: 2008
Conveyor angle (diverter + roller curve): 45° + 45°
Overall length (ML): 1150 mm
Nominal/outer width (NB): 900 mm
Usable width (NUB): 800 mm
Conveying speed: please contact us
Roller diameter: 50 mm steel rollers + conical rollers with plastic coating
Drive: SEW geared motor
Electrical data: 0.55 kW, 380-480 V
Bodpfx Aksri Snleujli
Axle pitch: 75 mm
Frame height: 120 mm, 450 mm including motor
Chain-driven transmission
Options available:
- Supports
- Side guides (one-sided or double-sided)
- Frequency inverter for stepless speed adjustment
- Ball transfer table for diverting or merging
Prices quoted net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For individual, professional advice please contact us directly.
You can reach us by phone or email.
We are happy to assist with the planning and implementation of your projects.
We look forward to hearing from you.
Best regards,
Your team at Dr. Sonntag GmbH & Co. KG
Your specialist and partner for intralogistics
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Metzingen
1 242 km
Plokštės gręžimo staklės - Horizontaliosios
COLLET & ENGELHARDTBF 130 - 11
Skambinti
Būklė: naudotas, Gamybos metai: 1973, Spindle diameter: 130 mm
X travel: 3000 mm
Y travel: 2000 mm
Total power requirement: 4.5 kW
Machine weight approx.: 30 t
Boring spindle diameter: 130 mm
Spindle taper: SK 50
Working area:
X – Column longitudinal: 3000 mm
Y – Spindle head vertical: 2000 mm
Z – Spindle stroke: 1000 mm
Table plate (lower): 3300 x 2400 mm
Load capacity per m²: 10 t/m²
Built-up table approx.: xx,000 mm
Min./Max. position of work spindle above table: 770 / 2770 mm
Feed: 0.9 – 2000 mm/min
Rapid traverse for spindle head and column: 5000 mm
Quill feed: 0.5–1200 mm/min
Speed range, partially infinitely variable: 4.5 – 1,250 rpm
Machine weight: approx. 30,000 kg
Accessories / Special equipment:
- Heidenhain 3-axis digital readout, hardened guideways, ball screws
- Infinitely variable spindle speeds and feeds, separately motor-driven feeds
- Travelling operator platform, pendant control panel, hand-held remote, platform
- Hydrostatic guideway in column traverse
- Clamp plate 3,200 x 2,500 mm planed, with T-slots; add-on table approx.
Bljdpot Hwt Ssfx Akusi
1400 x 2600 x 900 mm high, one side face machined
- Hydraulic clamping for column/carriage, motorized tool clamping
- Extensive accessories, particularly tool holders with and without tools
Separate chip extraction unit, clamping aids, 1 clamping angle plate and plates, and much more
Mažas skelbimas
Metzingen
1 242 km
Gilių skylių gręžimo staklės
GILDEMEISTER & KNOLL2 M 01-2-320
Skambinti
Būklė: naudotas, Gamybos metai: 1985, Maximum core drilling diameter: 18 mm
Drilling depth: 320 mm
Swing diameter: mm
Total power requirement: 33 kW
Machine weight: approx. 6 t
Space requirement: approx. m
GILDEMEISTER & KNOLL / TBT
Horizontal 2-spindle deep hole drilling machine
Type: 2 M 01-2-320
Year of manufacture: 1985 / 1999 (rebuilt and modernised by TBT)
Drilling - solid drilling: approx. 1 - 18 mm
Drilling - reaming: approx. 25 mm
Drilling depth: 320 mm
Centre height above bed/table: 150 mm
Travel of drilling slide max. approx.: 500 mm
Travel of feed slide (linear guides): 500 mm
Spindle distance: 125 mm
Drilling feed/rapid traverse step-less: approx. 35 - 1,000/7,000 mm/min
Centre distance between the spindles: approx. 125 mm
Spindle speeds FORTUNA HF spindle up to max.: 24,000 rpm (800 Hz)
Total drive power of the complete machine: approx. 33 kW - 400 V - 50 Hz
Weight: approx. 6,000 kg
Accessories / special equipment:
" Machine currently set up for high-precision drilling of injection pump parts (Ø approx. 25 x 150 mm, bore approx. 5 mm) which are fed by an inclined conveyor into a 2-position alignment station, checked for correct orientation, and then automatically and in pairs loaded into the machining zone between drill bush holder and powered tailstock via a transversely mounted loading portal (2 x double grippers). After machining, the second pair of grippers takes over the workpieces and transfers them to a blow-off and drill breakage test station. After successful testing, the workpieces fall into transport containers.
" Sequence programming and monitoring via SIEMENS OP 17 PLC control.
" 2 cooled and oil mist-lubricated HF spindles from FORTUNA, approx. 2/3.5 kW output
" Drilling slide feed via GS motor and ball screw
" Separate drilling oil system approx. 1,500 litres with various pumps and a sophisticated belt filter cleaning system
" Separate hydraulic unit approx. 10 kW
" Separate BKW cooling system for spindle and hydraulic oil cooling
Bledpfxot Hwvao Akuoi
" 2 separate control and switch cabinets, CE marking
Condition: good to very good - will soon be ready for demonstration
Delivery: ex stock - as inspected
Payment: strictly net - upon receipt of invoice
Mažas skelbimas
Metzingen
1 242 km
Gilių skylių gręžimo staklės
SIGB 30 /16
Skambinti
Būklė: naudotas, Gamybos metai: 1965, Max. core drilling diameter: 50 mm
Drilling depth: 2,000 mm
Swing diameter: mm
Max. drilling diameter: 110 mm
Total power requirement: 30 kW
Machine weight approx.: 10 t
Year of manufacture: 1965
Overhauled: 2000
Drilling Ø - solid drilling approx. 2 - 50 mm
- boring approx. 100 mm
Max. drilling depth: 1,600 / up to 2,000 mm (see stroke/installation length)
Drill carriage stroke approx.: 4,000 mm
Distance between spindle heads: 5,000 mm
Center height over guideways: 350/450 mm
Bodet Hwucopfx Akusli
Drill carriage feed, infinitely variable: 20 - 200 mm/min
Rapid feed of drill carriage: 2,500 mm/min
Workpiece speeds via belt drive: 260 - 650 / 650 - 1,625 rpm
Working spindle drive: 24 kW
Coolant pump drives: 1 x 7.5/15 kW, 1 x 15/28 kW
Total drive approx. 60 kW, 380 V – 50 Hz
Overall machine/guideway length: 7,500 / 5,000 mm
Total weight approx.: 10,000 kg
Accessories / Special features:
- Machine consists of the following elements:
Main spindle on the left side, followed by a BOZA, powered table assembly with
ball screw, BOZA with increased center height, and a spindle stock of the B 16 series with drive motor approx. 7.5 kW, n = 900/2,400 and 2,400/6,000 rpm. Very large and elaborate coolant system with filter unit, extensive accessories and drilling tools up to 100 mm Ø.
- Suitable for rotating workpiece/fixed drilling tool (ELB and BTA methods), as well as for stationary workpiece and rotating drilling tool. Internal (ELB) as well as external oil supply (BTA) possible.
- Complete coolant system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rates: 17/40/120 and 220/500 L/min; capacity approx. 2,500 L.
- Carriage feed via ball screw and infinitely adjustable DC motor; mounted table cross-adjustable approx. 500 mm, table approx. 800 x 800 mm for clamping cubic and cylindrical workpieces. Electrically controlled via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return.
- 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø.
- Modernized control panel with speed display, feed adjustment and indication, kW display, feed/rapid traverse selection (left/right), etc.
- 2 separate control cabinets, separate BOZA, sleeves, adapters, clamping aids, and much more.
Condition: Good – ready for demonstration soon; machine is highly valuable due to accessories
Delivery: Ex stock – as inspected
Payment: Net – upon receipt of invoice
Further deep hole drilling machines constantly in stock – please inquire with us.
Mažas skelbimas
Metzingen
1 242 km
Paviršiaus šlifavimo staklės su sukamuoju stalu - Vertikalios
SIELEMANNRFsB 100
Skambinti
Būklė: naudotas, Gamybos metai: 1969, Rotary table diameter: 1000 mm
Grinding height: 500 mm
Grinding head drive power: 15/5.5 kW
Total connected load: 30 kW
Machine weight approx.: 18 t
Space requirement approx.: [not specified] m
S I E L E M A N N
Vertical Rotary Table Surface and Internal Grinding Machine
with 2 Grinding Heads
Model RFsB 100 #8185
Year of construction: 1969, completely overhauled by manufacturer in 1990
_____
Rotary table – face plate diameter – Ø: 1,000 mm
Distance from table center to column approx.: 1,150 mm
Mounting height table/grinding heads approx.: 500 mm
Workpiece height approx.: 400 mm
Overhang of grinding heads approx.: 500/700 mm
Max. workpiece weight approx.: 900 kg
Table rotation speeds, hydraulically variable, right/left (14.5 kW): 5–60 rpm
Table longitudinal stroke approx.: 550 mm
Table infeed (internal/external grinding): 0.0025 – 0.025 mm/stroke
Table oscillation stroke/feed (creep feed 0.2 m): 0.2 – 1,000 mm/min
Table dwell time at stroke reversal: 0-10 sec.
Grindable bore diameters approx.: 0 – 900 mm
Grinding slide stroke for both heads approx.: 500 mm
Internal grinding spindle diameter max.: 140/100 mm
Surface grinding head diameter (segment wheel): 450 mm
Motor drives for surface and internal grinding heads: 15 /5.5 kW
Total drive approx. 30 kW – 380 V/50 Hz
Weight approx. 18,000 kg
Accessories/Special Features:
• The rotary table rotates with the workpiece and also performs the infeed motion
• The corresponding grinding head is swiveled in by rotating the column (with hydraulic lifting), so the workpiece can be machined in a single clamping with precise angular positioning
• Additional height adjustment on the internal grinding slide by approx. 150 mm
• Digital display of grinding wheel speeds
• Grinding wheel dressing devices mounted on the grinding column, or can be manually swung in
• Separate hydraulic unit * Separate control cabinet *
Bjdpfx Aksu Su Apeuoli
• Magnetic face plate with infinitely variable holding force adjustment, various small parts
• Currently no coolant system installed
The machine is ideal for grinding heavy and irregularly shaped workpieces, gears, ball bearings, housings and circular knives, and is very universal and highly precise for other grinding tasks.
Condition: Good – will soon be ready for demonstration. A video is available here:
Delivery: ex stock – as inspected
Payment: strictly net – upon receipt of invoice
We look forward to receiving your order. A wide range of other grinding machines always in stock – please contact us for details.
Q U O T A T I O N
We are pleased to offer you ex our stock, subject to prior sale and error in technical data:
S I E L E M A N N (Germany)
Hydraulic Rotary Table Internal and Face Grinding Machine
with two grinding heads and horizontal workpiece clamping
Model RFsB 100
Palengviname jums paiešką: "ballas"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Ballas (1 506)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
















































































































