Ballas pirkti naudotą (1 643)

Būklė: naujas, Saw blade dimensions: 3650 x 27 x 0.9 mm Cutting speed: 15 – 100 m/min Vice opening: 335 mm Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 45°: round 260 / 200 mm Cutting capacity at 45°: square 250 / 180 mm Cutting capacity at 45°: flat 270 x 200 / 200 x 160 mm Ljdpfx Asyv Nylsfzsri Cutting capacity at 60°: round 180 mm Cutting capacity at 60°: square 170 mm Cutting capacity at 60°: flat 170 x 170 mm Total connected load: 2.2 kW Weight: 1,105 kg Dimensions: 2700 x 2300 x 1800 mm Electrohydraulic fully automatic band saw with multi-microprocessor control and additional semi-automatic, semi-automatic dynamic, and manual operation modes. - Automatic cycle (cuts from 0° to 60° left). CNC automatic operation with two controlled axes, allowing the programming of up to 1000 different cutting programs for materials of identical thickness, each with separate cutting lengths and quantities. - Semi-automatic, semi-automatic dynamic, and manual cycles (cuts from 45° right to 60° left) - Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand control button) - Manual or semi-automatic dynamic cycle for direct cutting operations without programming. Selected features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines for showing technical parameters such as: blade speed, programmed and completed cut quantities, blade thickness, feed length, cutting time, ammeter, blade tension, and display of approximately 100 diagnostic messages and warnings — available in the user’s selected language. - Logging and display of alarm and error messages, with the possibility to review past incidents. - Automatic parameter setting via control system when a new drive or inverter is installed. - Electronic inverter for infinitely variable blade speed adjustment from 15 to 100 m/min. - Latest generation hydraulic control unit, offering high performance and low energy consumption. - New 600 mm material feed with stepper motor and ball screw mounted on opposing ball bearings. - Saw bow stroke programmable directly from the control panel for adaptation to the workpiece. - Electronic blade tension monitoring. - Automatic cutting force monitoring via a servo valve mounted directly on the cylinder. - Coolant tank (equipped with 2 electric pumps for band lubrication and cooling) built into the machine base. - Chip drawer (can be replaced by a chip conveyor — see special accessories) - Prepared for installation of a minimum quantity lubrication system for the blade (optional), alongside the standard emulsion oil lubrication. - Chip removal brush. - Machine is configured for pallet truck transport. - Bi-metal band saw blade suitable for solid and profile material.

Būklė: naujas, Saw band dimensions: 2085x20x0.9 mm Cutting capacity at 90° (round): 185 mm Cutting capacity at 90° (square): 150x150 mm Lredpfxeyv Nfzs Afzoi Cutting capacity at 90° (flat): 220x150 mm Cutting capacity at 45° right (round): 110 mm Cutting capacity at 45° right (square): 100x100 mm Cutting capacity at 45° right (flat): 110x90 mm Cutting capacity at 60° (round): 70 mm Cutting capacity at 60° (square): 70x70 mm Cutting capacity at 60° (flat): 70x70 mm Voltage: 230 V Saw band speed: 30–75 m/min Vice opening: 230 mm Total power consumption: 2.35 kW Machine weight: approx. 200 kg Space requirements: approx. 1280x550x1480 mm The Zimmer Z185/R is a self-lowering saw designed for mitre cuts from 0° to 60° left. After completing the cut, the machine stops automatically via a safety limit switch. The descent rate is infinitely adjustable via a hydraulic system. The saw arm can be raised manually after cutting and can be stopped at any desired position; the saw arm remains in the selected position. Features: - Choice of hydraulically controlled or manual saw arm lowering - Saw arm swings up to 60° to the right - Quick-release vice - Blade guides with 8 ball bearings - Hydraulic saw band tensioning with tension indicator and band breakage shut-off - Coolant system included - Machine base included

Būklė: naujas, Cutting range at 90°: round 350 mm Cutting range at 90°: square 350 mm Saw blade dimensions: 4640x34x1.1 mm Vise opening: 355 mm Saw blade speed: 15–115 m/min Machine weight: approx. 2,800 kg Space requirement: approx. 3050x2190x2200 mm Shark 350 NC HS 5.0 – automatic hydraulic band saw machine in a double-column design for 0° cuts on solid materials and profiles of steel, stainless steel, and steel alloys up to max. 350x350 mm. Standard equipment includes: + Powered chip conveyor, installable on either the right or left side of the machine. + Adjustable clamping pressure for the vices. + Feed unit with vertical rollers for lateral material support. - Numerically controlled band saw machine, also operable in semi-automatic mode, equipped with the new MEP 50 control unit (Windows CE-based, developed by MEP for automatic machines). - "Clean cut" cycle: The feeder pushes the workpiece backwards to avoid scoring on the cut surface when the blade returns at the end of the cut. - Fieldbus communication system with dual microprocessor and serial connection. - User interface with 7" touchscreen display and mechanical buttons for band saw operating functions, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters. - Automatic determination of the starting cutting position. - CNC machine for storing up to 100 cutting programs with different quantities and cut lengths. It is also possible to select up to 100 programs as a sequence. - Sturdy cast iron construction to absorb vibrations, ensuring stable cutting precision and long saw blade life. - Hydraulic feed of the saw frame via linear guides with preloaded ball bearing rails. - Hydraulic control unit for opening/closing the feed and front vices. - Continuously variable saw blade speed from 15 to 110 m/min via vector inverter. - Material feed via stepper motor and recirculating ball screw mounted on opposing bearings with a 600 mm stroke, repeatable for cutting any length. - Maximum remnant length 120 mm + cut length (OPTIONAL: special feeder jaws to minimize remnant to 25 mm + cut length). - Cut monitoring system (OPTIONAL). - Material feeder with self-aligning feeder vice for feeding slightly bent material. Lodpeyv Nd Refx Afzjri - Saw blade drive wheel secured by a conical clamping ring for optimal fastening and simultaneous axial adjustment. - Management software for real-time control/evaluation/correction of: - Cutting force - Cutting torque and saw blade tension compared to programmed values. - Adjustable saw blade guide heads made of steel with combined roller and hard metal guides, including control valves for traditional circulation lubrication. - Prepared for installation of OPTIONAL minimal quantity lubrication system. - Adjustment of the saw blade drive wheel for blade change directly from the operator console. - Automatic adjustment of the front saw blade guide head to match material size. - Machines...

Būklė: naujas, Saw band dimensions: 3650x27x0.9 mm Cutting speed: 15/100 m/min Cutting capacity at 90° (round): 280 mm Cutting capacity at 90° (square): 260 mm Cutting capacity at 90° (flat): 330x260 mm Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (square): 250 mm Cutting capacity at 45° (flat): 270x200 mm Cutting capacity at 60° (round): 180 mm Cutting capacity at 60° (square): 170 mm Cutting capacity at 60° (flat): 170x170 mm Total power requirement: 2.2 kW Vise opening: 340 mm Weight: 1240 kg Dimensions: 2020x2040x1740 mm Lsdpeyv I Sysfx Afzjri Electrohydraulic fully automatic bandsaw with additional semi-automatic function, for cutting angles from 0° to 60° to the left. Compact machine equipped with the new Windows "CE"-based MEP-50 controller and a 7" touch screen display for managing all machine parameters. Simple operation and real-time monitoring of all cutting parameters. Material feed is operated by stepper motor via ball screw spindle mounted on opposing ball bearings; single stroke 600 mm – repeatable for any cutting length. Easy programming – just enter the cut length and quantity, then press "START". - Electronic blade tension control - Automatic monitoring of cutting load by servo valve mounted directly on the cylinder - Blade rotation monitoring with instant stop in case of saw blade blockage Chip removal brush and emulsion coolant pump included as standard.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 38 mm, tekinimo skersmuo virš slankiojančio stalo: 320 mm, tekėjimo ilgis: 910 mm, bendras ilgis: 700 mm, bendras plotis: 1 610 mm, bendras aukštis: 1 350 mm, veleno greitis (maks.): 1 650 aps./min, veleno greitis (min.): 65 aps./min, didžiausias metrinės sriegio skersmuo: 6 mm, metrinės sriegio eigos: 23, bendras svoris: 272 kg, trijų žandikaulių griebtuvo skersmuo: 160 mm, The HOBBY 910 G lathe, in its standard configuration, is equipped with a leadscrew and a feed shaft for threading, or for automatic longitudinal and cross feed. The 12-speed gearbox allows rapid spindle speed adjustments—without the need to change the V-belt. Thanks to its compact design and high weight, the machine ensures quiet yet highly precise operation. -Easy and quick spindle speed change via gearbox -High concentricity thanks to precision ball bearings -Powerful drive motor with high torque, spindle speed range 65 – 1650 rpm -Wide range of applications: precision mechanics, vocational training centers, education, etc. -Simple feed adjustment, smooth and precise switching -Robust machine bed with induction-hardened and ground guideways -Machine ideal for machining steel, non-ferrous metals, and plastics -Standard equipment includes a leadscrew for automatic longitudinal and cross feed -Carriage with handwheels and precision graduated scales Technical specifications: Centre distance: 910 mm Centre height: 160 mm Swing over bed: 320 mm Bed width: 160 mm Ljdpfx Afeyn Amnjzsri Spindle bore: 38 mm Spindle mount taper: MT 5 Spindle speed (min): 65 rpm Spindle speed (max): 1650 rpm Number of spindle speeds: 12 Longitudinal feed range: 0.087 – 2.049 mm/rev Cross feed range: 0.019 – 0.444 mm/rev Metric threads: (23) 0.25 – 6 mm Imperial threads: 4 – 120 TPI Tailstock quill travel: 75 mm Tailstock taper: MT 3 Motor power: 1.5 kW Motor power S1 100%: 1.1 kW Voltage: 230 V Dimensions (W x D x H): 1610 x 700 x 1350 mm Weight approx.: 272 kg Scope of delivery: 160 mm 3-jaw chuck Cross slide Fixed centres Change gears Four-way tool post LED work lamp Chuck guard Chip tray Leadscrew guard Operation tools Stand/base

Būklė: naujas, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Price: €17,940 Leasing rate: €344.45 Grinding wheel dimensions: Ø 200x78x78 mm Speed: 2800 rpm Distance grinding wheel to table (without magnetic chuck): 300 mm Magnetic chuck: 300x150x55 mm Grinding area: 350x150 mm Table: 500x160 mm Ljdpfx Aoyv Iqvjfzori Motor power: 3.6 kW Length: 1020 mm Width: 820 mm Height: 2170 mm Weight: 440 kg This surface grinding machine with fixed table is based on the R.V. 500 model but differs by its long, quadruple-guided column with additional robust column support. Owing to its rigidity and geometric stability, this surface grinder is ideally suited for grinding precision parts of considerable height: single or series parts from toolmaking, molds, dies, gears, and many more. The nuts of the vertical feed spindle and the alignment pins for axis alignment on this fixed-table grinding machine ensure consistently optimum operating conditions. Cast iron bed for lasting geometric stability of the grinding machine. Cast iron column protected by bellows and mounted in four adjustable precision bearings, generously sized for this type of fixed-table grinding machine. Three-phase motor with double-shell air cooling to prevent motor overheating during continuous operation and to maintain constant temperature of the motor shaft and bearings. Hardened, ground and dynamically balanced spindle, mounted in precision ball bearings, generously dimensioned for this type of surface grinder with fixed table, self-adjusting via spring pre-tension to compensate for thermal expansion. Vertical feed spindle mounted in opposing, adjustable ball bearings for optimal movement, keeping the grinding wheel area free of obstacles and preventing dust accumulation. Metal bellows offer further protection of the vertical feed spindle. Opposing bronze nuts compensate for wear of the vertical feed spindle over time. Alignment pins align the grinding machine motor with the axis, ensuring surface parallelism even over prolonged use. The handwheel is triple-supported and connected to the spindle via two helical gears. It features a graduated drum supported by an axial bearing, enabling a material removal per pass of 0.01 - 0.02 - 0.03 mm. Rapid traverse per handwheel revolution is 2 mm. A rotary knob with lever enables programmable micrometric feed of 0.01 - 0.02 - 0.03 - 0.04 mm per pulse, facilitating operation by eliminating the need for a continuous step control. Slot for optimum utilization of grinding wheel working height and for clamping non-magnetic parts and accessories such as magnetic chuck, self-centering chuck, and angle plates. Low-voltage controls, protective devices, indicator lights, and all necessary equipment to comply with current safety and conformity standards for this type of surface grinding machine with fixed table. Handles, design, and dimensions of the fixed-table grinding machine conform to current standards...

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 2 310 mm, bendras plotis: 1 850 mm, bendras aukštis: 2 250 mm, bendras svoris: 1 540 kg, įėjimo įtampa: 400 V, galia: 20 kW (27,19 AG), įėjimo srovė: 29 A, įėjimo dažnis: 50 Hz, For sale: Handtmann HVF 660 high vacuum filler with vacuum hopper and automatic loading system. This machine is designed for high-quality meat product manufacturing – scalded sausages, cured products, and ham specialties. TECHNICAL DATA & SPECIFICATION • Filling pump capacity: up to 10,200 kg/h (170 l/min) • Main drive: AC servo motor, 13 kW (24 kW with mincing attachment) • Filling pressure: 40 bar • Series 3 vane pump with 14-blade bolted rotor and 'C' series vanes • Feed hopper with 350 l capacity and sliding cover. The hopper is manufactured using vacuum technology and is connected to a separate vacuum pump with a capacity of 100 m3/h; equipped with a double-arm feed screw and separate AC servo drive • Integrated main vacuum pump, capacity 40 m3/h • Integrated computer controller, Monitor Control type with 12” color touchscreen (Polish language support), plus safety cover • Integrated filling pump weight compensation system – patented technology exclusive to Handtmann fillers! • Additional free-standing loading hopper, type 695, 450 l capacity (includes cleaning ball), connected to the filler hopper with Ø 250/200 mm piping; two-step inspection platforms • Loading system for 200 l trolleys, type AHV 83-6/200, for operation with loading hopper 695 (includes separate lift control) • Tool trolley type 449-02 • Hopper filling level sensor • Two external control sockets: X 30 and X 31 • Power supply: 380–440 V • Portioning range: 100 – 100,000 g Ljdpfxeyrqg De Afzori • Easily accessible USB port – for simple software upload or backup HVF 660 unit dimensions: net weight 1,540 kg, dimensions: 2310 x 1850 x 2250 mm Loading hopper 695 with AHV loader: net weight 590 kg, dimensions: 212 x 160 x 225 cm INCLUDES: 1. HVF 660 (filling and portioning) 2. With vacuum hopper and integrated 100 m3 vacuum pump 3. Loading hopper 695, 450 l (with cleaning ball and scraper) 4. 250 mm diameter connecting pipe 5. Loader for 200 l trolleys, type AHV 83-6/200 6. Level sensor for automatic hopper loading 7. Bolted rotor 8. Grinder attachment drive 9. GD 93-3 grinder attachment (filling and portioning) 10. Automatic separation system for grinder attachment Net total price: For questions or further information, please send a message or call. Krzysztof Żakowicz

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2005, veikimo valandos: 14 923 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 762 mm, Y ašies eiga: 406 mm, Z ašies eigos atstumas: 305 mm, padavimo ilgis X ašis: 762 mm, padavimo eiga Y ašimi: 406 mm, padavimo ilgis Z ašis: 305 mm, sukimo momentas: 45 Nm, valdiklių gamintojas: Haas, bendras aukštis: 2 700 mm, bendras ilgis: 2 200 mm, bendras plotis: 1 750 mm, stalo plotis: 267 mm, stalo ilgis: 1 213 mm, sukimosi greitis (maks.): 6 000 aps./min, bendras svoris: 1 315 kg, veleno greitis (maks.): 6 000 aps./min, ašies variklio galia: 5 600 W, veleno nosis: CT40/ISO/BT40, ašies skaičius: 1, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Three-axis vertical CNC milling machine Haas TM1 (TM-1) with a 6000 rpm spindle. The machine is offered by Haas service engineers with 10 years of experience. The machining center has undergone a full, comprehensive inspection; the machine is refurbished and ready for operation. Sale based on a bill of sale; VAT invoice can be issued. A twin machine will be available for sale soon, with the option to purchase both simultaneously. Possibility to sell the milling machine with installation and accuracy analysis using the advanced Renishaw Ballbar device, which performs a circularity test with an accuracy of 0.0001 mm / 0.1 µm. We provide service support for the machine if needed! We assist with transport and financing! The milling machine is equipped with several additional features: - upgraded spindle up to 6000 rpm, - rigid tapping, - zero point tracking (rotation & scaling), - M19 spindle orientation, - macros, - HSM (high speed machining), - intuitive programming system (visual part programming), - possibility to enable the fourth axis by adding an inverter and wiring, can be sold separately (fourth axis), - air cooling. Technical data: - Machine type: Three-axis vertical milling machine Haas TM1 - Year of manufacture: 2005 - Spindle speed: 6000 rpm - X axis travel: 762 mm - Y axis travel: 406 mm - Z axis travel: 305 mm - Table dimensions: 1213 x 267 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 507 mm - Dimensions (W x D x H): 220 x 175 x 270 cm - Weight: 1315 kg - 3 T-slots, 16 mm wide Lredpfx Afjyanlajzji - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40/ISO/BT40 The machine has been fully inspected. All ball screws, linear guides, lubrication system, spindle, spindle motor, encoder, vector drive, inverters, IO board, processor board, all components in the electrical cabinet, axis drives, tool changer, controller, and much more have been checked. Contact us for more information. We also offer import on request and pre-purchase inspections for all Haas lathes and mills, including VF, VM, DT, DM, Mini Mill, EC, UMC, ST, DS, SL, TL series, and many others.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995, FULLY AUTOMATIC INLINE MACHINE FOR FOLDING BOXES BOBST MIDLINE 924 Speed: up to 18,000 boxes/hour Lredpfx Ajxrfrasfzoi Nominal machine width: 2,400 mm Nominal circumference of printing cylinder: 1,000 mm Maximum print area: 920 x 2,400 mm // Maximum corrugated board thickness: 10 mm Standard slitting knife thickness: 6.35 mm Average connected load: 200 KVA The line consists of: 1) Feeder – Serco feeder 2) Main unit – Flexo printing machine, Midline 924 Colors: 3 // Automatic washing system 3) Slotter (scorer) Longitudinal slots // The tool is integrated in the machine. 4) Die-cutting module (e.g., for punching hand holes) 5) Waste stripper – vibrating station (Material – die-cut remnants are removed using compressed air) 6) Glue station Robotech 7) Folding unit 8) Counting station & delivery section The specified number of cartons is bundled together - up to here main section - 9) Bundle strapping/binding machine CEMA Fully automatic strapping machine with weld seal and press for 5 mm plastic strap, for strapping corrugated bundles in the direction of the flute 10) Palletizing system Martin Automatic layer formation. Roller tables collect the bundles from the strapping machine. Packages are positioned using the ball transfer table, according to the layout selected for that layer. If required, packages can be rotated simultaneously by 90° or 180° during the lateral movement.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, veikimo valandos: 1 000 h, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: hidraulinis, valdiklio modelis: CypCut FSCUT 3000DE, lazeri tipas: šviesolaidinis lazeris, lazdo šaltinio gamintojas: Reci, lazero valandos: 1 000 h, lazerio galia: 2 000 W, plieno lakšto storis (maks.): 12 mm, nerūdijančio plieno lakšto storis (maks.): 6 mm, aliuminio lakšto storis (maks.): 6 mm, Vamzdžio skersmuo (maks.): 245 mm, Vamzdžio ilgis (maks.): 6 000 mm, darbinis ilgis: 3 000 mm, darbinis plotis: 1 500 mm, X ašies eiga: 1 500 mm, Y ašies eiga: 3 000 mm, įėjimo įtampa: 380 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, aušinimo tipas: vanduo, suslėgto oro jungtis: 15 juosta, Įranga: aušinimo blokas, centralizuota tepimo sistema, dulkių šalinimas, dūmų ištraukimas, 2 kW fiber laser for sheet metal cutting + pipe cutting attachment Ø245 mm – complete HOYSOOK set, model 3015, in very good condition – used only for short test series production, year of manufacture 2024. Manufacturer: HOYSOOK Model: 3015 Year of manufacture: 2024 Full industrial set Reason for sale: change in production profile Operating hours: < 1000 h Description: I am selling a modern fiber laser (2,000 W) for cutting sheet metal and pipes. The machine is a full industrial configuration, year of manufacture 2024, and the laser source has clocked under 1,000 hours of operation – it is virtually new. The machine is fully functional and ready for immediate commissioning at a new worksite. It has only been used for small batch production and only underwent the start-up phase (runtime photo available in the gallery). The sale is due to a change in the production profile – the machine will not be used as frequently as originally planned. Operating parameters: • Sheet metal cutting area: 3000 x 1500 mm • Maximum pipe length in attachment: 6000 mm, diameter Ø245 mm • Power supply: 380 V, 3 phases, 50/60 Hz • Positioning repeatability: ±0.03 mm • Maximum cutting speed: 50 m/min • Example materials cut: mild steel up to 12 mm, stainless steel up to 2 mm, aluminum up to 1 mm Industrial-grade equipment: Mechanics and drives: • Welded, hardened, and tempered steel bed – maximum durability and stability • Gantry beam made from aluminum profiles • Veichi servo motors and controllers • France Moto gear reducer • YYC (Taiwan) rack and pinion Ljdpfx Afjytccgszeri • TBI ball screw • HIWIN (Taiwan) or SMAGIC (Japan) linear guides Laser head and source: • Raytools BM110 laser head with autofocus and automatic height tracking function • Reci laser source, operating hours

Gamybos metai: 2026, būklė: naujas, New machine Year of manufacture: 2026 The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm. Technical standard features of the vacuum press: Unless otherwise agreed, the vacuum press is powder-coated in RAL 7012 and RAL 7035. Special colors are available upon request; this must be clarified in advance and may incur additional costs. Welded table construction for professional use, mounted on a swiveling carriage with 4 swivel castors, surface load capacity: 150 kg. When not in use, the machine can be swiveled and locked in a space-saving position, reducing the depth requirement to 800 mm. The tabletop is made from a 22 mm thick laminate MDF panel, covered in the pressing area with a slotted MDF vacuum distribution plate. The membrane frame opening is supported by 2 gas pressure springs mounted on the sides of the machine. A natural rubber membrane with 2 mm thickness, 780% elasticity, and temperature resistance up to 70 °C is installed, fastened with a clamping system for efficient membrane changes. Circumferential sealing of the pressing chamber is provided by a sealing profile in the membrane frame. Oil-lubricated vacuum pump with 40 m³/h suction capacity and two vacuum tanks with a total volume of 200 liters. Evacuation and ventilation of the pressing chamber are controlled via a 3-way ball valve on the machine front. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. Additionally, initial setup and a brief instruction by one of our technicians can be booked. If desired, we will be happy to provide a separate quote for this service. Summary of key features: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elasticity: 780%, excellent shape recovery, suitable for temperatures up to 70 °C - MDF vacuum distribution plate - Digital vacuum control VAK-CONTROL 1 with auto shutoff - Vacuum pump: 40 m³/h oil-lubricated Ledpfx Afjywpt Iezsri - Max. vacuum: -0.99 bar - Max. pressing pressure: up to 9.9 t/m² - Connected load: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with lock - Additional 13 mm vacuum connection - Pressing area: 3500 x 1420 mm - Table height to vacuum distribution plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1030 mm - Space requirement (ready for operation): 3790 x 1700 x 2150 mm (LxWxH) - Space requirement (swiveled): 3790 x 800 x 1750 mm (LxWxH) Customs tariff number: 84659400 Net weight: 570 kg Gross weight: 660 kg Availability: April/May 2026 Location: Flörsheim

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 3300 x 2100 x 2100 mm Weight: 1500 kg Total power requirement: 14 kW CNC Processing Center ROUTERMAX 1325 ECO - Working area X-Axis: 1300 mm - Working area Y-Axis: 2500 mm - Working area Z-Axis: 300 mm - Milling spindle water-cooled, each 4.5 kW, ER 25 with CHILLER CW 3000 cooling unit - Spindle speed infinitely variable up to 22,000 rpm - Drive system (X & Y axis): rack and pinion drive - Drive system (Z axis): ball screw - Drive motors: stepper motors - Max. traverse speed: 22 m/min - Max. working speed: 15 m/min - Working accuracy: 0.05 mm - Vacuum grid table with 4 zones and T-slots - Vacuum pump 5.5 kW, dry-running, air-cooled - Tool length sensor - Controller: DSP type NK 105 (MACH3 option) - Interface: USB - CAD/CAM software: Vectric Cut2D PRO (nesting included) - Electrical connection: 3-phase 400 V, 50 Hz Lrsdpfx Afev A Hadezji - Operating ambient temperature: 0–45°C - Dimensions (width): 2100 mm - Dimensions (length): 3300 mm - Weight: 1500 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The HRT/D 3 m Roller Conveyor is a high-quality roller conveyor designed for demanding use in industrial plants, metal workshops, and machining centers. Thanks to its segmented construction, divided into two sections, this model offers not only high rigidity and operational stability, but also convenient transport and rapid assembly, even in hard-to-reach areas. It's an ideal solution for demanding users who value efficiency, durability, and flexible configuration. Key advantages of the machine: - 10 steel rollers, size 60 × 360 mm – optimal material stabilization during conveying - Segmented design – easier handling, assembly, and transport without compromising rigidity Lredpfsymnx Hox Afzji - Load capacity up to 900 kg – suitable for heavy structural components, shafts, profiles, and pipes - Continuously adjustable height from 650–1100 mm – compatible with various machining machines - Modular construction – possible extension and connection with other roller conveyors - Reinforced crossbars in the legs – improved resistance to vibrations and dynamic loads Construction and Technology: The HRT/D 3 m model features a robust industrial build based on thick-walled steel box sections. The segmented structure, divided into two connected sections, simplifies logistics and provides greater rigidity compared to one-piece designs. Steel rollers mounted on ball bearings ensure low rolling resistance and thus smooth material transfer regardless of its shape. Precision and Work Efficiency: Proper material feed to a saw, cutter, or other processing machine is crucial for technological process quality and accuracy. Thanks to its adjustable height and high load capacity, the HRT/D roller conveyor eliminates vibrations, material twisting, and positioning errors. This not only extends the life of cutting tools but also reduces setup time and streamlines the entire production cycle. Application: The HRT/D 3 m roller conveyor is used in the following environments: - Steel construction and prefabrication plants - Metalworking shops and metal component manufacturers - Profile and pipe cutting centers - Machinery and tool industry Its potential for extension and integration with other infeed systems allows this device to fit nearly any technological layout. Standard equipment: - 10 steel rollers, diameter 60 mm - Steel frame divided into two segments - Adjustable legs, height range 650–1100 mm - Cross-structure reinforcements Technical specifications: Roller diameter: 60 mm Roller length: 360 mm Number of rollers: 10 Conveyor length: 3000 mm Conveyor width: 450 mm Height range: 650–1100 mm Maximum load capacity: 900 kg Weight: 50 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Fanuc 31/32 i CNC control Units in stock: 2 Chuck diameter: 170 mm Swing diameter: 210 mm X-axis travel: 400 mm Z-axis travel: 200 mm Length: 2500 mm Width: 1900 mm Height: 2300 mm Weight: 5500 kg MAIN SPINDLE Spindle flange as per DIN 55026 size 5 Spindle bearing diameter (front): 80 mm Maximum speed: 7,500 rpm MAIN DRIVE AC asynchronous motor 40 / 100% duty cycle kW: 25 / 16 Full power from spindle speed 100% duty cycle: 1800 rpm Torque 40 / 100% duty cycle Nm: 134 / 85 FEED DRIVE Rapid traverse speed, X-axis: 60 m/min Rapid traverse speed, Z-axis: 30 m/min Feed force in X and Z axes: 5 kN Ball screw diameter X / Z: 40 mm TURRET Boring bar holder DIN 69880, 12 stations Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage - DC: 24 V / AC: 230 V Frequency: 50 Hz Connected load without/with live tooling: 28 / 31 kW Lrodpfxjyvvupj Afzsi Main fuse: 50 A LOAD TIME (depending on clamping device): 2-4 sec Length incl. chip conveyor: Price: ex works, unloaded, €55,000 net plus VAT Price: ex stock, €65,000 net plus VAT

Būklė: naujas, Gamybos metai: 2026, Sheet width 3050 mm Sheet thickness 13.0 mm Cutting angle 0.5–2.5° Backgauge range 1000 mm Working height 900 mm - New machine - - Backgauge 1000 mm - Lrsdpowp Tduofx Afzei with SC200 control, motorized backgauge, cutting line illumination, electric cutting gap adjustment, electro-hydraulic cutting angle adjustment, angle stop 1000 mm with 3 balls, scale and T-slot, closed guillotine table with rollers, 2 support arms 1000 mm with 3 balls, hydraulic hold-up device with cutting support * For more information on the exact standard equipment and available options, visit our website or call us directly *

Būklė: naujas, Condition: new Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €197,600 Leasing rate: €3,734.64 Pressing force: 400 t Bending length: 6,050 mm Axes: 3 Stroke: 365 mm Distance between frames: 5,100 mm Throat depth (side frame): 510 mm Installation height: 630 mm Drive concept: hydraulic Rapid traverse speed Y-axis: 120 mm/s Working speed Y-axis: 8 mm/s Return speed Y-axis: 100 mm/s Back gauge travel X-axis: 750 mm Back gauge speed X-axis: 350 mm/s Back gauge speed R-axis: 300 mm/s Back gauge travel R-axis: 250 mm Table height: 1,220 mm Table width: 154 mm Oil tank: 500 l Motor power: 37 kW Length: 7,500 mm Width: 2,110 mm Height: 3,810 mm Weight: 34,660 kg 3 axes (Y1, Y2, X) CNC CONTROL DT-15 - 15" 2D graphic display - Intuitive touchscreen operation (easy drawing of bending contour with finger) - User-friendly dialog-based programming - Automatic calculation of bending sequence - Automatic calculation of blank length for sheet cutting - Graphic product and tool memory - Correction capability - USB ports for backup and program export - PC software allowing programs to be written on PC and then transferred to the machine via USB Servo-driven back gauge on linear guides with ball screw spindles Back gauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil fill Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S: - Greater stroke, installation height, and throat depth - Higher approach and return speed of the upper beam - Increased back gauge speed - Back gauge fingers on double instead of single linear guides - More options available, e.g.: additional back gauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem version, other CNC controls, etc. Price FCA Turkey Options (prices on request): R-axis R/Z1/Z2 axes Lodoyui R Tspfx Afzjri DBend 3D CAD/CAM import and simulation software (import of STEP, IGES, and DXF files) CNC control Delem DA66 S DA-69S 3D incl. PC software Profile-S with 3D file import Hydraulic tool clamping systems

Būklė: naudotas, Gamybos metai: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE morbidelli x200 Drilling and milling made for you! The numerically controlled machining center is equipped with a wide range of tooling for milling and drilling, meeting every requirement in the processing of wood and similar materials. Ø High-performing, with drilling spindles offering 8,000 RPM and . The technology features the toughest spindle available on the market, providing more than 1,000 maintenance-free operation hours. Ø Better and more comprehensively equipped, with various configuration options thanks to the multifunction table, ensuring the machine can be optimally set up for any application. Ø Easier and more intuitive programming with the integrated CAD-CAM module "MAESTRO CNC." Ø Simplified operation: The worktable is always accessible, the control cabinet and vacuum pump are integrated, and in PRO SPACE configuration, there are no safety barriers. Load-Bearing Structure The load-bearing structure consists of a particularly robust monolithic steel base, heavily ribbed and very rigid; the especially wide support was specifically designed to ensure machine stability, providing sustained precision regardless of operating conditions, and eliminating the need to anchor the machine to the floor. The base forms a large and solid foundation for the movable gantry: the working unit thus features a balanced, stable, and durable support that withstands the highest stresses, ensuring superior performance and greater accuracy. The movable gantry is made from a solid single piece, anchored to the base on both sides, gliding on high-quality prismatic guides with ball-return carriages. The double drive system on the X-axis guarantees top performance even under heavy operating conditions. Movement of the lower movable unit (X-axis) and the working unit along the beam of the movable unit (Y-axis) is achieved via helical rack and pinion transmission; this results in greater tooth-to-tooth force for higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, delivering perfect balance under dynamic loads and capable of rapid acceleration and deceleration. The main routing unit is directly coupled to the Z-axis carriage, guaranteeing absolute finishing quality by eliminating vibrations. Movement along the X-Y-Z axes is achieved with brushless motors powered by static inverters; these ensure: - Shorter processing times thanks to improved acceleration - Greater positioning accuracy thanks to high-resolution encoders - Zeroed setup activities when starting up the machine with absolute encoders - Elimination of general maintenance work, as the brushless system does not use brushes Axis and general machine element management are handled by an industrial NS module with digital data transmission. Ljdpfxjywvlde Afzsri

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 66 600 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, We offer you the following: Technical Data: Control system: Heidenhain iTNC 530 HSCI Travel distances: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Max. table load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary tilting table including table cooling - BLUM NT laser tool measurement system - Calibration arbor with tool holder - Wireless touch probe, Heidenhain TS 649 - 3D quickSET preparation - Scraper-belt chip conveyor - ICS (internal coolant supply), 40 bar, 600 l tank, incl. rotating sight glass, air purge, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of zero-point clamping system Ledpfxjxgnz To Afzori - Selection and deselection of handling system via switch on the machine control panel - incl. additional rinsing inside the working area - incl. machine preparation for job management - incl. control panel arrangement on the left - Energy supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - incl. rotary union extended to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, depicted tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change and prior sale. Errors excepted!

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 40 h, variklių gamintojas: Cummins, Įranga: CE žymėjimas, apšvietimas, centralizuota tepimo sistema, priekinė apsauga, ENGINE Cummins B 4.5 engine Engine output: 129 kW (173 hp) / 2,200 rpm HYDRAULIC SYSTEM Modern load-sensing system (LUDV) 3 power modes, 3 operating modes, user mode Boost function Attachment settings 3 attachment control modes (shovel/prop./continuous) Idle automation Automatic engine shutdown Electronic, reversible fan control CENTRAL MONITORING 8" LCD touchscreen display Engine tachometer or trip meter/acceleration Low/high speed range Auto-idle Overload warning with alarm SAFETY Safety valve on boom cylinders with overload warning device Safety valve on arm cylinder Safety valve on dozer blade cylinder and oscillation lock cylinder Four external mirrors Four front work lights (2 on boom, 2 on front frame) Travel alarm Automatic slew brake Swing lock Master battery switch MISCELLANEOUS Cruise control Speed limiter Creeper mode Heavy counterweight Removable radiator dust screen for easy cleaning Fuel pre-filter Self-diagnosis system Batteries (2 x 12 V x 100 Ah) Fuel filling pump (35 l/min) with auto-stop Single-acting hydraulic kit (hydraulic hammer, etc.) Double-acting hydraulic kit (grab, etc.) Accumulator for lowering work attachments Toolbox lower frame - left, right UNDERCARRIAGE Rear shield Mudguards (splash guards) Stick 2500 mm Stick safety valves (2pc-boom) Adjustable boom 4710 mm Boom safety valves (2pc-boom) Counterweight 2200 kg (adjustable boom) With bucket linkage Uppercarriage for adjustable boom Lrsdpoyucdgofx Afzji Proportional dual-acting lines for hammer and grab Proportional lines for rotation function Lines for quick coupler Bucket/grab switching Travel motor with 20 km/h speed level Base plate adjustable boom/dual mode Rear dozer blade Proportional joystick with FNR switch Standard key Boom cushioning & boom float position Grab guard front and rear dozer blade Joystick steering Tow coupling preparation With boom work light (LED) Auto digging brake Cab front work light (LED) Rear work light (LED) LED beacon Smoker kit (ashtray + 12V socket) Standard painting Cyclone air filter Fenders front and rear Toolbox both sides Central lubrication Beka (adjustable boom) (Europe) Rain protection German road approval Premium seat, heated, cooled, pneumatically suspended Single balloon tires = 4 x 800/40x26.5 Alliance Towing hitch ball head + Rockinger Tower elevation 80mm FOPS cab guard LED work lights LED boom work lights Differential lock 33% front and rear 360° camera with 2nd monitor Full LED package Yellow clearance lights Compressor-operated cooler box DAB+ radio Fire extinguisher First aid kit Warning triangle High-visibility vest Pressureless return line Steel mudguards Bucket tilt cylinder with linkage Herder boom extension Herder mowing basket MRZT430

Būklė: naujas, Gamybos metai: 2024, Bending force: 320 t Year of manufacture: 2024 (New) Control system: DT 15 Bending length: 4050 mm Distance between uprights: 3600 mm Y rapid traverse speed: 100 mm / s Y working speed: 10 mm / s Y return speed: 100 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Throat depth: 450 mm 2 support arms 2 backgauge fingers X-axis travel speed: 350 mm / s X-axis travel: 750 mm R-axis travel speed (max.): 300 mm / s R-axis travel: 250 mm Standard equipment: Lrjdpfxsff Hvle Afzsi Y1, Y2, X (3 axes) Y1, Y2, X = 650 mm (double-guided, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motor as well as linear guide and ball screw Backgauge fingers with height adjustment (R-axis, manual) CE die holder system (upper dies) Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, meeting global standards Electrical equipment according to international standards Option: CE certified Motorized crowning and X & R-axis backgauge Motor power: 37 kW Oil tank capacity: 250 l Length: 5300 mm Width: 1910 mm Height: 3230 mm Weight: approx. 20,000 kg

Būklė: naujas, Gamybos metai: 2023, plieno lakšto storis (maks.): 10 mm, pjovimo ilgis (maks.): 3 050 mm, Technical Specifications Cutting Capacities: - Maximum Cutting Length: 3100 mm - Maximum Thickness for Mild Steel: 10 mm - Maximum Thickness for Stainless Steel: 6 mm - Throat Depth: 50 mm - Adjustable Cutting Angle: 1.5 degrees - Number of Hold-downs: 16 - Hold-down Force: 22 tonnes - Adjustable Backgauge: up to 1000 mm - Backgauge Speed: 200 mm per second Drive and Dimensions: - Motor Power: 22 kW Lrsdpert Uv Eofx Afzei - Oil Tank Capacity: 200 litres - Support Arms: 2 pcs - Working Table Height: 865 mm - Working Table Width: 580 mm - Working Table Length: 3515 mm - Machine Dimensions (LxWxH): 4200 mm x 2250 mm x 2100 mm - Weight: 9300 kg - Total Width incl. support arm and safety guard: 3600 mm Features - Oscillating cutting action for precise results - Intuitive NC control (D-Touch 7) with touchscreen for settings such as backgauge, cutting length, and number of cuts, including USB port - Motorised backgauge on ball screws with a range up to 1000 mm, can be lifted for maximum flexibility - Clear control panel on the swivel arm for convenient operation - Hydraulic hold-downs positioned close to the cutting edge for optimised results - Foot pedal for easy operation - Centrally adjustable blade gap for various material thicknesses - Cutting line illumination for improved accuracy - Large support table with roller balls for material handling - Counter for cut pieces - Single and serial cut options - Folding finger guard and side stops for safe operation - Easily replaceable and resharpenable blades for long-lasting sharpness - Adjustable cutting length for efficient processing and minimal material waste - Low-maintenance design with easily accessible oil fill - Safety light barriers at the rear of the machine for increased workplace safety - Professional customer service - Operating manual in GERMAN and ENGLISH - Conforms to current CE safety regulations

Būklė: naujas, Gamybos metai: 2024, Everything can be configured according to your requirements, with very short production and delivery times. We are happy to provide you with further information upon request. Technical Specifications: Bending force: 600 tonnes Bending length: 6,050 mm Distance between supports: 5,100 mm Stroke: 365 mm Installation height: 700 mm Throat depth: 510 mm Table height: 990 mm Table width: 154 mm Y rapid traverse: 80 mm Y working speed: 7 mm/sec Y return speed: 80 mm/sec X axes working speed: 350 mm/sec R axes working speed: 300 mm R axes travel: 250 mm X axes distance: 750 mm Motor power: 55 kW Length: 8,050 mm Width: 3,200 mm Height: 4,250 mm Weight: 72,000 kg Standard Equipment Lredpefir U Nofx Afzji Y1, Y2, X, R – 4 axes Control unit – CNC ModEva15T Servo drive backgauge & linear guided ball screw system (X-R) CNC crowning European style tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves to international standards Electrical equipment to international standards Optional Equipment Control unit – ModEva Premium, 69T and 66T CE Manual F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M motorized + FPSC (Safety PLC) CE BLVT Safety – only for tandem machines Z1, Z2 axes X1, X2 axes Bil0h3uvee R1, R2 axes Delta X axis, +/- 250mm stroke or +/- 125mm CNC-controlled X axis = 1000 mm – rear protection with light curtain AP3-AP4 bending aid Height-adjustable laser angle measurement system Quick clamping system Hydraulic and pneumatic tool clamping systems Top and bottom tools Bottom tool positioning system Parking area Central lubrication system Oil cooler Additional backgauge finger and extra movable support arms Special packaging for overseas transport Request more information

Būklė: naujas, Gamybos metai: 2024, Directly from the manufacturer: High-performance guillotine shear Durma SBT 3010 This machine stands for innovative technology and delivers excellent cutting performance to optimize your production processes. Learn more about the comprehensive standard equipment and impressive technical data that make the SBT 3010 a must-have for any workshop. Comprehensive standard equipment: - CE certification for the highest safety and quality standards. - D-Touch 7 touchscreen control with color display for intuitive operation. - Adjustable hydraulic hold-down pressure for optimal material clamping. - Precision backgauge with ball screw, adjustable up to 1000 mm. - Side gauge (L = 1500 mm) and two support arms (L = 1000 mm) with T-slot and spring-loaded stop for optimal material guidance. - Table plate with ball rollers for easy handling and protection of the workpiece. - Central blade gap adjustment via handwheel for quick modifications. - Cutting line illumination for precise alignment. - High-quality blade set for versatility and durability. - Cutting length limiter and piece counter to optimize your production processes. Technical data and features: - Cutting length: 3100 mm Lrsdpfx Afjrx R E Dezei - Maximum sheet thickness: 10 mm (mild steel), 6 mm (stainless steel) - Throat depth in side frame: 50 mm - Strokes per minute: 13 - Cutting angle: 1.5° - Number of hold-downs: 16 - Hold-down pressure: 22 tons - Backgauge: up to 1000 mm with a speed of 200 mm/s - Motor power: 22 kW - Oil tank: 200 liters - Number of support arms: 2 - Table dimensions: height 865 mm, width 580 mm, length 3515 mm Overall dimensions: Length: 4200 mm, Width: 2250 mm, Total width with support arm and rear safety guard: 3600 mm, Height: 2100 mm Weight: 9300 kg As the manufacturer, we guarantee you a machine that excels in performance, precision, and reliability. The Durma SBT 3010 is the ideal solution for companies looking to enhance their efficiency and productivity in sheet metal processing.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Technical Data: Sheet length: 4,100 mm Sheet thickness: 6 mm Distance between columns: - mm Total power requirement: 15 kW Weight approx.: 11.5 t Dimensions (LxWxH): 5250 x 2300 x 2215 mm Lrsdpfxjh Ib T Uj Afzei Backgauge: 1000 mm D-Touch 7 Touchscreen CNC control, user-friendly central cutting angle adjustment Ball screw, 1000 mm & automatic swing-up Support balls on the table for improved material handling Side gauge with scale & T-slot and swing stop Support arms with T-slot and swing stop Cutting line illumination & 1 m foldable finger guard High-performance hydraulic and electronic components Automatic pressure adjustment Swiveling backgauge Cutting line illumination Foot pedal CE-standard for EU The machines can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Additional machines are available for demonstration at our facility in Staufenberg. Further information is available upon request.

Būklė: naujas, Gamybos metai: 2024, Bending force: 320 t Year of manufacture: New (delivery time 6-8 weeks) Control: DT 15 Bending length: 3050 mm Distance between columns: 2600 mm Lrsdpfx Afofifg Hszji Y rapid speed: 160 mm/s Y working speed: 10 mm/s Y return speed: 140 mm/s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Throat depth: 410 mm 2 support arms 2 backgauge fingers X-axis travel speed: 250 mm/s R-axis working speed (max.): 140 mm/s R-axis travel path: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motor and linear guide, ball screw Backgauge fingers with height adjustment (R-axis, manual) CE die holder system (upper dies) Front sheet support arms, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, in accordance with international standards Electrical equipment according to international standards Option: CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4-axes) CNC motorized crowning Motor power: 37 kW Oil tank capacity: 250 liters Length: 4300 mm Width: 1820 mm Height: 3230 mm Weight approx. 17,250 kg