Juostiniai pjūklai - horizontali

BERG & SCHMID GBS 305 HA-I Easy

Sąlyga: naujas, Cutting diameter: 305 mm Knjdpfeu Dbvtjx Adkod Saw band length: 3375 mm Cutting width: 350 mm Saw band dimensions: 3375 x 27 x 0.9 mm Cutting capacity at 90° round: 305 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° rectangular: 350 x 200 mm Cutting capacity at 45° round: 250 mm Cutting capacity at 45° square: 230 mm Cutting capacity at 45° rectangular: 230 x 200 mm Cutting capacity at 60° round: 175 mm Cutting capacity at 60° square: 155 mm Cutting capacity at 60° flat: 170 x 100 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.7 t Space requirement: approx. 1.5 x 1.8 x 1.9 m - Mitre cuts up to 60° left and 45° right - Material height sensor - Ball bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Sąlyga: naudotas, Gamybos metai: 1995, Pjovimo skersmuo: 280 mm Juostos pjūklo ilgis: 4200 mm Pjovimo plotis: 280 x 280 mm Juostos pjūklo matmenys: 4200 x 34 x 1,1 mm Pjovimo greitis: 18 - 115 m/min Daugkartinis padavimas: 0 - 6000 mm Pavaros galia: 3,0 kW Darbinė įtampa: 400 V Bendras galios poreikis: 5,0 kW Staklių svoris apie 2,3 t Užimama vieta apie 2,35 x 2,40 x 2,00 m - Gamyklos Nr.: 6082 - Valdymas: SIEMENS COROS - OP 15 Knsdpfxsp Rai Eo Adkod - Drožlių transporterio įtaisas - Daugkartinis padavimas - Ryšulio spaudimas - Aušinimo skysčio sistema - Minimalios tepimo sistema

Sąlyga: naujas, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350x200 mm Saw blade length: 3375x27x0.9 mm Blade speed: 18 - 100 m/min Table height: 940 mm Total power requirement: 1.5 kW Machine weight: approx. 0.65 t Space requirement: approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double mitre metal band saw, semi-automatic hydraulic model GBS 305 HA-I Easy - Mitre cuts up to 60° left and 45° right - Material height sensor - Ball bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system Kedpfefgyiajx Adkond

Sąlyga: naujas, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 – 110 m/min Total power requirement: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL OFFER PRICE!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy - Mitre cuts left 60° and right 45° - Material height sensor (automatic cut start detection) - One-piece cast frame and gearbox; exceptionally quiet and low-vibration cutting - Hydraulic vice, laterally adjustable - Guided, high-quality industrial bearings - Robust vice and machine casting - Large machine bed - Machine base with tool compartment and chip drawer - Cut monitoring via ammeter - Feed pressure regulator - Support roller (material infeed side) - Ball-bearing rotary table Semi-automatic operation: Knedofgyh Ujpfx Adksd 1. Clamp material 2. Start saw 3. Fast lowering to material edge, or for series cutting, cut immediately 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Sąlyga: naujas, Cutting diameter: 240 mm Saw blade dimensions: 2730 x 27 x 0.9 mm Table height: 920 mm Cutting speed: 35 + 70 m/min Kjdpfjd Iip Sjx Adkond Cutting capacity at 90° round: 240 mm Cutting capacity at 90° square: 230 mm Cutting capacity at 90° rectangle: 270 x 230 mm Cutting capacity at 45° round: 210 mm Cutting capacity at 45° square: 200 mm Cutting capacity at 45° rectangle: 200 x 210 mm Cutting capacity at 60° round: 130 mm Cutting capacity at 60° square: 130 mm Cutting capacity at 60° flat: 130 x 160 mm Total power requirement: 1.2 kW Machine weight: approx. 0.26 t Space requirement: approx. 0.9 x 1.6 x 1.74 m • Mitre cut left 60° • Quick-action vice with quick-clamping device • Quick-release lever for easy operation • Frame and gearbox cast in one piece, very quiet cut and low vibration • Electronic monitoring of blade tension and blade breakage, saw blade cover • Carbide saw blade guides • Large machine bed • Machine base (supplied disassembled) with automatic coolant system The AutoCut system consists of: Hydraulic cylinder, feed control, spring package, limit switch Automatic saw frame lowering via the hydraulic cylinder, infinitely adjustable feed, with limit switch at the end of the cut. Rapid traverse lowering of the saw frame from rest position to the workpiece, then switching to normal sawing feed (e.g. for scribing). Manual operation: The hydraulic cylinder acts as a brake cylinder (e.g. for notching). The brake cylinder allows the saw to be positioned at any point during the return stroke.

Sąlyga: naujas, Table height: 650 - 1050 mm Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm Table width: 1230 mm Knsdsfk Aifspfx Adkjd Table length: 2480 mm Weight approx.: 733 kg This allows the user to flexibly adjust the working surface height according to requirements, enhancing productivity and ergonomics. Height adjustment is standardly achieved via a manual hydraulic system within a range of 650 to 1050 mm (other heights available on request). Like the SST fix series, the worktop features a 100 x 100 mm grid of Ø 28 mm holes. When used in combination with processing machines, test or post-processing fixtures (deburring, marking, checking) can be adjusted to match the clamping table height of the respective machine. The table systems can be easily relocated on site using a pallet truck. These mobile systems, with their various fastening and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced directly after removal from the machine and transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the work surface can be cost-effectively replaced if worn in the future. Price must be confirmed with the manufacturer before ordering! For accessories and further information, please follow this link:

Sąlyga: naujas, Gamybos metai: 2025, Quick miter adjustment from 30° to 150°, stepless, with 0.5° accuracy according to the scale. The miter pivot point is at the intersection of the saw band and the material stop, so there is no change in length measurement. End stops at 30° & 45° left and 30° & 45° right. Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure reduction by the own weight of the heavy, torsion-resistant saw frame and fine adjustment according to material cross-section via hydraulic damping cylinder. Knodpfx Adsbi S Dijkjd Standard equipment with coolant unit, which can optionally be supplemented with a micro-dosing system. Machine base with chip tray. Saw band drive with end-of-stroke switch. Precision saw band carbide-roller guides. Painted silver-grey / blue-grey (RAL 7001 / RAL 7031). 1 saw band mounted on the machine, 4/6 TPI. Operating manual and spare parts list on CD-ROM. Special equipment: Hydraulic lifting of the saw frame. Execution: Manual Miter capacity: 30° left: Ø 130mm; square 120x120mm 45° left: Ø 200mm; square 180x180mm 90°: Ø 260mm; square 300x260mm 45° right: Ø 200mm; square 180x180mm 30° right: Ø 130mm; square 120x120mm Motor: [kW] 1.8 Saw band: [mm] 3350x27x0.9 Saw band speed: 35/75 m/min Working height: [mm] 900

Sąlyga: naudotas, mašinos/transporto priemonės numeris: G-KR127757P, Laguna Fusion table saw, good condition, 1450 watts, 1118 mm table length, 792 mm table width, 79 mm cutting height, 3800 rpm, 110 kg Ksdpfovw Ec Tsx Adkend Price subject to change without notice. Errors, misprints, and typographical mistakes excepted.

Sąlyga: naujas, Ex-display promotion. NEW. No. 1 available for immediate delivery. CE warranty. The MACC SPECIAL 335 MS is a semi-automatic bandsaw designed for cutting solid bars and small-section profiles, offering high performance and excellent precision. Its robust construction provides the rigidity and accuracy required for the cutting unit. The blade drive features a dual-speed motor and a special gearbox with a bronze gear and a hardened, ground worm screw. Adequately sized flywheels and robust blade guides, equipped with sealed bearings and adjustable carbide plates, ensure reliable operation. Blade tensioning is managed via an electromechanical micro-switch by rotating the blade. The machine is fitted with safety devices on the flywheel covers and the blade, and includes a swiveling worktable for material support and a vice with rapid approach function. Knedpfeg S Ui Aox Adkjd Operation: The cutting cycle is started with a start button, and the machine will: 1. Close the vice and start the blade motor; 2. Lower the saw bow to perform the cut; 3. Return the bow to the starting position; 4. Stop the blade motor; 5. Open the vice. Manual cutting mode available. Cutting speed (m/min): 38-77 Cutting thickness (mm): 1.2 Miter cutting range: From 45° left to 60° right Adjustable stop for repeat cuts Electropump for blade coolant: 0.06 kW Cutting capacity at 0° (Round / Square / Rectangle): 260 / 250x250 / 220x330 mm Cutting capacity at 45° left (Round / Square / Rectangle): 225 / 210x210 / 160x225 mm Cutting capacity at 45° right (Round / Square / Rectangle): 215 / 200x200 / 160x210 mm Cutting capacity at 60° right (Round / Square / Rectangle): 130 / 130x130 / 130x140 mm Blade dimensions: 3010x27x0.9 mm Weight [kg]: 415

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 450x320 mm Saw band length 4250x34x1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitre cutting left and right 60° without machine conversion · 34 mm saw band width · Large material support turntable, ball bearing mounted · Saw band guides positioned via extra-wide linear guides · Heavy-duty, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Free-standing, safe and ergonomic control console · Storage space for saw bands and consumables · Cutting pressure and feed rate regulator · Fully hydraulic vice · Super-fast preclamp (front loading) · Material height sensor (automatic cut-start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lower feed to material or start cutting for serial cuts Knodpfofgyicex Adkjd 4. Stop saw band 5. Raise frame just above material 6. Release vice Optimal, material-independent cutting results through fine adjustment of the saw frame using: * Pressure control valve (cutting pressure-force) * Feed control valve (speed) * Switches with pictograms, easy and clear to operate