Aliuminio diskinis pjūklas

MEP - Vollautomat COBRA 352 NC 5.0

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin Dcedpfx Agouiy Hre Isl - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, steplessly adjustable Saw blade height adjustment: electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. Among other things, the following components have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface Djdpjuiy Ngsfx Ag Ijcl - Conversion to servo-controlled pusher - New electrical components - New pneumatic lines - New pneumatic components - Retrofit to valve manifold - Optimized extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishing of the enclosure In addition, the machine features: - Minimum quantity lubrication - Splitter extension (for high-quality cut surfaces without drag marks) - Loading magazine for gentle handling of painted/anodized surfaces - Scrap piece ejection in the pusher - Foldable scrap piece tray Options: - Magazine width: 3,000 mm - Pusher length: 6,000 mm - Pusher length: 8,000 mm - Reinforced motor: 5.5 kW - Multiple clamping device for parallel sawing of several workpieces - Online support connection - Delivery and installation at your site - Training for your staff

Būklė: geras (naudotas), Gamybos metai: 2011, mašinos/transporto priemonės numeris: 1423530534, Pasiūlymas 26120 Techniniai duomenys: Djdsy Efl Nopfx Ag Iecl - Pjūklo disko skersmuo apie 500 mm - Pjūklo disko apsukų skaičius: 2800 aps./min - Pjovimo sritis, pvz., iki apie 180 x 150 mm, 150 x 200 mm - Įstūmimo ilgis tiesiems pjūviams 90°: 5 – 600 mm - Galimi kampiniai pjūviai iki 45° - Suslėgto oro prijungimas: 7 bar - Oro suvartojimas vienam darbo ciklui be / su purškimu: 50 / 64 l - Pavara: 400 V / 4,0 kW - Užimama vieta apie: Pl. 2750 x A. 1600 x G. 1350 mm - Svoris apie 800 kg - su: skaitmeniniu indikatoriumi - pneumatiniu prispaudėju - automatinio išjungimo funkcija pasibaigus profiliui

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit Suitable for many applications, especially in the photovoltaic and automotive industries. Loading unit: Horizontal loading magazine, model HLM 4-strand toothed belt conveyor 6 compartments, 285 mm wide, for accommodating profiles; maximum material height in line with saw cutting range; round material max. diameter 130 mm 3 glide strips between toothed belts as additional support, profile length min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously variable speed control Hydro-pneumatic saw blade feed, continuously adjustable, from rear to front Siemens S7-300 control system with touchscreen Reversing device with 5-fold stroke up to max. 5,000 mm Electric material feed 3 - 1,000 mm (single stroke) Dedpfsxvbvvjx Ag Ijcl Cutting width extension on both sides Pneumatic removal slide Waste flap after the saw for cutting remnants / offcuts Section length, profile-dependent from 8 mm Menzel minimum-quantity lubrication Clamping pressure regulation 2 extraction nozzles for dust extraction Unloading: Table surface 1,500 mm x 2,500 mm Pneumatic cross transfer slide

Būklė: naujas, Gamybos metai: 2024, Pressure: 20 t Throat depth: 155 mm Dcedpfx Aovfhqijg Isl Stroke: 6-60 mm Strokes per minute: 84-210 spm Ram adjustment: 50 mm Shut height, ram at top position with adjustment at top: 300 mm Table surface: 300x450 mm Table height: 840 mm Pass-through hole in table: Ø 90 mm Ram surface: 190x278 mm Pin hole in ram: Ø 25 mm Total power requirement: 1.5 kW Machine weight approx.: 1.0 t Space requirements approx. (W x D x H): 1100x1100x1900 mm Machine number: 16144 LED machine lamp Stroke rate frequency-controlled Sick light barrier for safety and cycle operation 4x Electronic cams, freely programmable 4x Tool safety devices, freely programmable Machine feet Two-hand operation Foot operation Central lubrication Pneumatic clutch-brake combination Approved for manual loading tasks

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, Used automatic circular saw for aluminium MEP Cobra 352 NC 5.0 Year of manufacture: 2017 Blade dimensions: 350x32x3.4 mm Blade cutting speed: 1700/3400 rpm Mitre angle: from -45° to +45° Cutting capacity: at 0°: round: 120 mm, square: 105 mm, rectangle: 180x70 mm Touchscreen display Machine weight: 605 kg Dcedpfx Agswu Tz Ro Ijl

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1980, Darbo stalas 500 mm x 1200 mm Išsikišimo eiga 600 mm Dcedsx N Ih Iepfx Ag Iel Įrankio tvirtinimas MK 4 Gręžimo galia 32 mm pliene Sriegimo įrenginys Aušinimo įrenginys Apsaugos įtaisas ant grąžto Pilnai atnaujintas 2026 m.

Būklė: naujas, TECHNICAL DATA: - Base area: 15,000 x 24,000 mm [other versions available] - Grid dimension: 5,000 x 6,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm P6 particleboard, raw/white - Load capacity: 500 kg - Colour: RAL of your choice - Condition: new The mezzanine platforms can be extended in the specified grid as standard. Other sizes and heights available upon request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Flooring - Fastening material PRICES: Variant I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €4,499.65 net, plus transport costs and VAT. Variant II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €7,393.50 net, plus transport costs and VAT. Variant III: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €7,303.60 net, plus transport costs and VAT. Variant IV: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €10,513.84 net, plus transport costs and VAT. Variant V: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €13,707.36 net, plus transport costs and VAT. Variant VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €19,027.30 net, plus transport costs and VAT. Variant VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €25,003.69 net, plus transport costs and VAT. Other variants available Optional accessories: - Guardrails - Flush wall connection - Stairs - Transfer station - Impact protection YOUR CONTACTS AT DLK: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOMIZED DESIGN & MANUFACTURING This mezzanine system is an example from our standard portfolio. We of course develop and manufacture your storage platform precisely to your operational requirements – tailored to area, load capacity, installation height and intended area of use. Our planning department will prepare an individual, non-binding offer tailored to your specifications. Whether for new construction, expansion or modernization of existing systems – we support you with solid expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transportation and installation. This item is available for collection. Delivery or shipping is available for an additional charge. Additional costs depend on the delivery location and the scope of delivery and can be requested from us individually. PAYMENT TERMS Payment terms are to be agreed in individual cases. The price stated refers to each unit/net price or as specified in the description (plus VAT). You will, of course, receive an invoice indicating the VAT. ABOUT US DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveyor technology, mezzanine platforms, textile storage as well as machinery for trade, industry, and crafts. We continually offer a range of attractive used equipment from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us. Dcedpfxjxpizto Ag Isl ✅ Four to Win – The Success Components of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Būklė: naudotas, Gamybos metai: 2014, Suitable for extracting oil mist. Dedpfx Agownprxe Iscl Nominal air flow: 950 m³/h Noise level: 71 dB(A) Speed: 2850 rpm Dimensions (W x D x H approx.): 525 x 592 x 781 mm Weight approx.: 55 kg Connection rating approx.: 0.75 kW (400 V / 50 Hz) Colour: Grey

Būklė: naujas, Gamybos metai: 2024, Pressure: 30 t Throat depth: 180 mm Stroke: 8–76 mm Strokes per minute: 80–200 spm Ram adjustment: 60 mm Table size: 360 x 580 mm Table height: 840 mm Through-hole in table: Ø 110 mm Ram area: 250 x 350 mm Ram bore: Ø 40 mm Total power requirement: 3 kW Machine weight approx.: 1.8 t Space requirement approx. (WxDxH): 1350 x 1200 x 2100 mm Machine number: 16149 Dcsdpfovfhq Ajx Ag Iol LED machine lamp Stroke frequency electronically adjustable Sick light curtain for protection and cycle operation 4x freely programmable electronic cams 4x freely programmable tool protections Machine feet Two-hand operation Foot operation Central lubrication Mechanical rupture plate in ram Pneumatic clutch-brake combination Approved for manual loading/unloading operations