Suvirinimo stalas

Protec Siegmund, Demmeler HDL 1500 Hub Drehtisch

Gamybos metai: 2007, būklė: paruoštas naudoti (naudotas), A CNC turret punching machine by Amada for medium-format sheets, including an MP300 M loading unit, a Wilson X-Sharp grinding machine, and numerous standard and special punching tools, is available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300 kN, max. sheet size X/Y: 3000 mm / 1500 mm, max. sheet thickness: 6.35 mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128 m/min, repeatability: +/-0.1 mm, machine dimensions X/Y/Z: approx. 5100 mm / 3200 mm / 2300 mm, weight: approx. 18,000 kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet size X/Y: 3000 mm / 1500 mm, min. sheet size X/Y: 1000 mm / 300 mm, sheet thickness range: 0.8 mm – 6 mm, max. load capacity per pallet: 3,000 kg, max. stack height: 400 mm, max. sheet weight: 170 kg, max. pallets: 9, pallet change time: 25 s, sheet loading time: 18 s, weight: approx. 4,900 kg. 3) Tool grinding machine Wilson X-Sharp. Documentation available. Inspection on site is possible. Cjdpfx Aajwhp N Dehegp

Būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, aušinimo tipas: vanduo, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius wire feeder case VR 4000 ➤ Fronius standard intermediate hose package from 1.5 m ➤ Fronius trolley ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator This unit can weld almost all materials, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and applications: This TPS series can easily be connected to a robot. For this, you only need an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and load characteristic curves to further expand the functions of the TPS device. ----- IMMEDIATELY AVAILABLE Cgodpfjwbh Ifjx Aahep PROPER INVOICE Viewing possible in Austria, 1230 Vienna! ✔ Insured pallet shipping available! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? For your information, we purchase used devices in excellent condition, disassemble them, check everything thoroughly, replace any worn parts if necessary, and only after a successful test weld do we approve them for sale. "All" devices are clean and have neither burn holes in the displays nor numerous burn holes or dents scattered on the device! When you buy from us, you get an item that is worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and the requirements for intra-community supply within the EU are met, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately have no margin to offer a warranty. However, the devices can be tested and paid for in cash on site. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these devices and only sell what we understand.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, kuro tipas: elektrinis, bendras svoris: 2 500 kg, didžiausias leistinas svoris: 2 500 kg, stiebo tipas: teleskopinis, Self-propelled battery-powered crane from the renowned Italian company JMG, model MC25S, equipped with radio control and a lifting capacity of 2,500 kg. The machine is brand new and ready for inspection. Codpfx Ajwtppzsahjgp Distributor-provided, 12-month warranty. CRANE CLASSIFICATION ACCORDING TO UNI ISO 4301-1: A3 EUROPEAN DIRECTIVES: 2006/42/EC (Machinery Directive) 2004/108/EC (EMC) 2006/95/EC (Low Voltage Directive) 2000/14/EC and subsequent amendments. REFERENCE STANDARDS: EN 13000:2010 UNI ISO 4301-2:2011 and subsequent amendments. WHEEL DRIVE: Electric BOOM DRIVE: Hydraulic POWER SUPPLY: Electric battery MAX. LIFTING CAPACITY: 2,500 kg CRANE WEIGHT: 2,500 kg BOOM UPLIFT ANGLE: 60° BOOM DOWNWARD ANGLE: -15° FRAME: Designed and manufactured by JMG. Box-section, torsion-resistant structure made from high-strength structural steel. BOOM: Made of high-quality steel sheet, formed and welded. Consists of a base section, hydraulic telescopic system, and one mechanical extension. Boom tilting and extension are hydraulically actuated via telescopic cylinders. TRAVEL MOTOR: 2x 2 kW electric motors, 24 V AC, insulation class H PUMP MOTOR: 3 kW electric motor, 24 V DC, insulation class H DRIVE CONTROL: Electronic speed control, MOSFET type BATTERY: 24 V 420 Ah, with charge indicator DRIVE TRANSMISSION: Front axle driven via 2 gearboxes WHEELS: Front: superelastic, 18x7-8", 2 pcs. Rear: superelastic, 15x4 1/2-8", 2 pcs. BRAKES: Automatic on front wheels STEERING: Rear-wheel steering via electric motor. Max. steering angle: ±90° CONTROL: Operated via radio remote control HYDRAULIC SYSTEM: Powered by a silenced 3 kW gear pump. Cylinders controlled by electro-proportional valve block with radio remote control. Filter and safety valve included. Max. operating pressure: 22 MPa. SAFETY FEATURES: Electronic load moment indicator and limiter STANDARD CRANE EQUIPMENT: • Max lifting capacity 2.5 t • Front wheel drive via 2 reducers (one per wheel) • Hydraulically extendable telescopic boom (1 fixed, 2 telescoping sections) • Manual mechanical jib extension • 24 V 420 Ah battery pack • Stationary battery charger • Work lights • Warning beacon • Fire extinguisher • Radio control for boom and travel wheels • Electronic load indicator and limiter, CE compliant • Boom tilt angle +60° / -15° • CE declaration of conformity • User manual, technical documentation, certifications INSTALLED OPTIONAL EQUIPMENT: • 2.5 t hydraulic winch • Non-marking tyres • Battery water refill system • Onboard mobile charger • Manual 3-position fly jib, 1.0 t

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm Codpshzbipsfx Aahogp - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Būklė: geras (naudotas), Gamybos metai: 1985, Megamat Vertical Carousel Model: 130-225-42 Device no.: 4492 Year of manufacture: 1985 Device height: approx. 5410 mm Device width: approx. 2670 mm Device depth: approx. 1300 mm + 300 mm tabletop Number of trays: 42 Tray width: approx. 2155 mm Tray depth: approx. 410 mm Tray height: approx. 200 mm Shelf load capacity: 100 kg Total load capacity: 4,200 kg Colour: beige/green Cgodpfx Aasvc Hk Nohjp

Būklė: geras (naudotas), System: REWA chamber filter press, used Type: 470-15-25K-HP Design: side bar guided Filter plate size: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available to suit the medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (product-contacting parts): flange, tie rods stainless steel, PP or rubber-coated Material (non-product-contacting parts): stainless steel Purchase or rental: Plant inspections by appointment at our facility. Codoqakbrspfx Aahegp Other: We supply the system used, functional or refurbished, adapted to your requirements. Would you like to rent or buy this system? Please contact us, we are happy to assist you.

Būklė: naudotas, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. Csdpfx Aonah Tasahegp With its fixed working height, the machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide-belt with abrasive belt length: 3250 mm Standard with vacuum holding system, optional with magnetic holding system. By using 3250 mm long abrasive belts, you achieve a uniformly smooth surface and reduce consumable costs due to the belts’ longer service life. Thanks to the modular machine design, it is possible to offer the optimal configuration for the customer’s specific processing requirements. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and surface finishing. Please contact us for more information and images via mail(at) or

Būklė: naujas, Gamybos metai: 2023, Tube drilling machine, angled drilling machine, drilling automatic TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE VIEWED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Max. tube length 3,000 mm (option: 6,000 mm) - Positioning accuracy +/- 0.2 mm - 10 stops (expandable as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube rotation device Cgodpfx Aolgvkisahjp - Drilling unit power 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit illumination - Integrated tool cabinet - Round tubes up to 114 mm - Square tubes up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm - Double post up to 100 x 15 mm - Flow drilling up to M12 - Drill holes up to Ø 50 mm

Būklė: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Cedpod Ixadofx Aahsgp Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Būklė: naudotas, Length: 1800 mm Width: 1200 mm Machine weight approx.: 1.6 t Cgsdpfx Aascxxu Djhop Space requirement approx.: 1.8 x 1.2 x 0.4 m - Measuring plate with 5 special feet - Good condition