Horizontali Stossmaschine pirkti naudotą (6 321)

Būklė: naujas, Gamybos metai: 2026, Maximum pressure: 20 tons Stroke length: 200 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Work table: 480x1060 mm Working height: 900 mm Oil tank: 10 liters Maximum workpiece height: 200 mm Capacity flat: 200x12 mm Tube capacity: 48x4.0 mm *not with standard tools - Digital limitation of stroke and return stroke - NC control - Adjustable hydraulic pressure - Adjustable bending speed - Fully enclosed table Hnodpfx Abehgib No Ret - The ZOPF design enables quick tool changes without any loss of precision - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring there is no loss of precision even under high loads - With the universal tool holder and various tools, you can work with maximum flexibility.

Būklė: naujas, Gamybos metai: 2026, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Hnedpfxshgihkj Ab Rot Worktable: 660x1250 mm Working height: 900 mm Oil tank: 60 liters Maximum workpiece height: 5 mm Flat capacity: 200x26 mm Tube capacity: 60x5.0 mm *not with standard tools - Digital limitation of stroke and return stroke. - NC control system. - Adjustable hydraulic pressure - Adjustable bending speed - Fully enclosed table - The ZOPF design enables rapid tool changes without loss of accuracy. - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring no loss of precision even under high loads. - The universal tool holder with various tools allows for highly flexible operation.

Būklė: naujas, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangle 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic mode and up to 60° to the left in semi-automatic mode Material height probe (automatic cut start detection) Automatic feed unit via ball screw spindle, incremental feed with automatic length compensation Probe on the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Hedpfx Absfu Nbbj Ront Mechanical chip removal brush, feed clamping vice opening on both sides Remnant piece length 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cut lengths and quantities. Automatic feed unit 500 mm via ball screw spindle, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm. Fully hydraulic control of the saw frame and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Būklė: naujas, Pjovimo skersmuo 185 mm Juostos pjūklo ilgis 2.085 x 20 x 0,90 mm Stalo aukštis 915 mm Hnedpfx Aohpktrsb Rjt Juostos greitis 35/70 m/min Pjovimo diapazonas prie 90°: apvalus 185 mm Pjovimo diapazonas prie 90°: kvadratinis 150 mm Pjovimo diapazonas prie 90°: plokščias 220 x 150 mm Maitinimo įtampa 400 V Bendras galios poreikis 0,8 kW Įrenginio svoris apie 195 kg Reikalinga vieta apie 550 x 1.280 x 1.740 mm Metalinė juostinė pjovimo staklė su bepakopiu elektroniniu greičio reguliavimu ir automatiniu nuleidimu. • Perjungiklis, skirtas hidrauliniam arba rankiniam juostos rankos nuleidimui • Pjovimo rankena reguliuojama iki 60° į dešinę • Greito prispaudimo spaustukas • Juostos kreiptuvas su 8 rutuliniais guoliais • Hidraulinis juostos įtempimas su spaudimo indikatoriumi ir juostos lūžimo sauga • Įskaitant aušinimo sistemą • Įskaitant staklių pagrindą

Gamybos metai: 1987, būklė: naudotas, Maximum grinding length: 630 mm Maximum grinding width: 200 mm Workpiece height: ... mm X-axis travel max.: 250 mm Hnodogbgawjpfx Ab Rjt Y-axis travel max.: 710 mm Distance spindle center to table max.: 500 mm Table clamping area: 0.25 m² Maximum table load: 1.1 t Table speed - stepless: 2 - 18 m/min Automatic cross feed: ... Dust extraction: 0.25 kW Coolant pump: 0.09 kW Total power requirement approx.: 4.5 kW Machine weight approx.: 1.3 t Required space approx.: 2400 x 1600 x 1900 mm Adjustments: Y-axis: 1 scale division = 0.005 mm Z-axis: 1 scale division = 0.002 mm Manual cross adjustment (within the 250 mm Y-axis range): 80 mm Speeds: Automatic cross feed Travel in Y direction: - intermittent: 0.2 - 20 mm/stroke - continuous: 0 - 4 m/min Grinding wheel diameter max.: 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digital display for 2 positions/vertical infeed

Būklė: naujas, Oil tank capacity: 40 Bending capacity (flat material): 200 x 18 Bending capacity (round tubes): 60 x 4.0 Pressure: 40 Working speed: 10 Return speed: 10 Hsdpfx Abor I H A Re Rsnt Motor: 3 Table surface: 660 x 1250 Working height: 930 Length: 1250 Width: 650 Height: 1250 Stroke: 285 UZMA hydraulic horizontal presses with multidirectional functionality allow a wide range of operations including bending, punching, straightening, etc. on pipes, flat bars, profiles, rods, and all types of materials. Thanks to the quick tool change system, materials such as sheet metal, pipes, profiles, and bars can be quickly bent with the appropriate dies without any loss of time. UZMA stands out for its versatile operating functions and ease of use. A horizontal press machine is an indispensable piece of equipment for metalworking shops. Standard Accessories: - Standard accessories - Steel frame and robust machine design - Stroke adjustment via digital display - Manual or automatic operating system - Easy tool change with quick-change system - Durable construction of tools and tool guides made from high-quality, hardened steel - Foot pedal with digital display and emergency stop - 1 set of bending tools

Būklė: naujas, Oil tank capacity: 120 Bending capacity (flat material): 320 x 15 Bending capacity (round pipes): 114 x 8 Pressure: 80 Working speed: 10 Return speed: 10 Motor: 10 Table area: 750 x 1425 Working height: 930 Length: 1430 Width: 750 Height: 1450 Weight approx.: 1700 Stroke: 285 UZMA hydraulic horizontal presses with multi-directional function, designed for pipes, flat bars, profiles, rods, and all types of materials, allow a wide variety of different operations such as bending, punching, straightening, etc. With the quick tool change system, you can quickly bend materials like sheets, tubes, profiles, and rods using suitable dies without any loss of time. UZMA is defined by its versatile operation and user-friendly design. A horizontal press machine is an indispensable tool for metalworking shops. Standard Accessories: - Standard accessories - Steel frame and robust machine design - Stroke adjustment with digital display - Manual or automatic operating system - Quick and easy tool changes - Durable construction of tools and tool guides from high-quality, hardened steel - Foot pedal with digital display and emergency stop - 1 set of bending tools Hsdpfx Aer I H Dcsb Ront

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, We are a provider of innovative solutions in the field of horizontal stretch wrappers. Our state-of-the-art machines set new standards in the industry, enabling efficient, precise, and reliable wrapping of long goods. Discover the versatile features and premium quality of our horizontal stretch wrappers on our website, offering you the optimal solution for your requirements. - Semi-automatic or fully automatic - Inside diameter: 515 mm - Film width: 250 mm - Minimum product length: 350 mm Hnjdpfxjr Nc Tis Ab Rot

Būklė: naudotas, Gamybos metai: 1986, Cutting diameter: 460 mm Saw band length: 5,334 mm Cutting width: 1.3 mm Cutting area (square): 320 x 320 mm Cutting area (flat): 500 x 320 mm Control: minipos 807 Cutting speed: 16 - 80 m/min Saw band dimensions: 5,334 x 41 x 1.3 mm Feed length: 580 mm Multiple feed length: 5,800 mm Total power requirement: 8 kW Machine weight: approx. 3.5 t Machine dimensions (L x W x H): 2.7 x 2.95 x 2.15 m Hjdpfx Abjtqqrfj Rsnt Accessories: roller conveyor 4,150 mm long, roller conveyor 2,150 mm long, bundle clamping device, chip conveyor, coolant system

Būklė: geras (naudotas), Gamybos metai: 1992, Offer 23426 Hedorl Irvepfx Ab Rent Technical data: - Cutting capacity at 90° round: 420 mm - Cutting capacity at 90° flat: 635 x 290 mm - Cutting capacity at 45° round: 360 mm - Cutting capacity at 45° flat: 420 x 300 mm - Saw blade dimensions: 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds: 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame - Hydraulic material vice - Cutting pressure continuously adjustable: 0 – 10 m/min - Total drive power: 400 V / 2.2 kW - Coolant system - Machine is mounted on a swiveling chassis - Powered infeed roller conveyor: 4000 mm - Outfeed roller conveyor with length stop: 6000 mm - Space requirement: approx. W 2500 x H 1400 x D 1100 mm - Machine weight: approx. 950 kg - Roller conveyor weight: 2000 kg

Gamybos metai: 2003, būklė: naudotas, Cutting capacity – Round: 300 mm Saw blade dimensions: 3320 x 27 x 0.9 mm Hodpfx Aora Rrlsb Ront Cutting capacity – Rectangle: 330 x 260 mm Cutting capacity – Square: 260 mm Control system: Evolution Working height: 870 mm Saw blade speed: 40 / 80 m/min Machine weight: approx. 1050 kg

Būklė: naudotas, Hidraulinė horizontali ryšulių presas Tränklein BP/Hydraulic horizontal bunch press Tränklein BP Presavimo slėgis bepakopė reguliacija / Pressure steplessly adjustable: 0 – 2.500 kg Maksimali įvesties ilgis / Infeed length max: 770 mm Hnsdpfxeiwg A Ej Ab Rot Presavimo plokštės dydis / Press plate size: 290 x 220 mm Galima atlikti vaizdo patikrą internetu per Skype vaizdo pokalbį. Maloniai kviečiame apsilankyti – sandėlyje turime daugiau įrenginių. Galima pristatyti nedelsiant – įrenginį galima apžiūrėti vietoje. Sandėliuojama Emskirchene / Niurnberge – galima išbandyti.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 15 t, ryšulio plotis: 700 mm, ryšulio aukštis: 700 mm, balo svoris: 220 kg, įėjimo įtampa: 400 V, galia: 4 kW (5,44 AG), tuščias svoris: 2 700 kg, Manufacturer: Borg Baling Company Model: S-15KK Year of manufacture: 2002 Power supply: 3x400V, 4kW, 14.5A Pressing force: 15 t Net weight: 2.7 t Maximum bale dimensions: 700 x 700 x 1000 mm Hjdpfoh Dy Rfox Ab Rent Wide selection of used machinery and industrial equipment

Būklė: naudotas, Bündelpresse / Bunch Press - horizontal La Fornigrafica BP Hydraulische horizontale Bündelpresse / hydraulic horizontal bunch press Pressdruck stufenlos einstellbar / pressing pressure continuously adjustable 0 – 2,500 kg Einsatzlänge / infeed length max. 820 mm Pressplattengröße / pressing plate size 340 x 260 mm Online video inspection via Skype We would be pleased to welcome your visit – more machines in stock Immediately available – can be inspected Hnedpfjh R Udwjx Ab Ret In stock in Emskirchen / Nuremberg – test run possible

Būklė: labai geros būklės (naudotas), Horizontalaus konvejerio juostos matmenys: 2600 x 400 mm. Pagaminimo metai: Kaina: 1650 eurų. Kontaktinis asmuo: ponas Raineris Eckerle. Hedpfxsin Np Ns Ab Ront

Būklė: naujas, Gamybos metai: 2025, Hydraulic Horizontal Straightening and Bending Press - Manufacturer: ZOPF - Model: T 800 - Pressing force: 80 tons - With semi-automatic control system Control (99 programs, each with up to 16 steps) Includes bending pins (without punch) Includes tool holder for dies and foot pedal - Infinitely variable stroke adjustment 0–300 mm - Adjustable working speed Working stroke max. 10 mm/sec Return stroke 20 mm/sec - Adjustable hydraulic pressure - Maximum tool height: 300 mm - Motor power: 7.5 kW - 400 Volt, 50 Hz, 3 phase - Working height: 940 mm Hneded A Nc Djpfx Ab Ret - Closed work table - Exchangeable wear plate - Weight: 2,100 kg - Bending capacity: Flat material 300 x 32 mm with maximum V-die Round tube 3/8" – 3"

Būklė: naujas, Cutting diameter: 220 mm Saw blade length: 2450 x 27 x 0.9 mm Table height: 915 mm Band speed: 35 + 70 m/min Connection voltage: 400 V Cutting capacity at 90°: round 220 mm Cutting capacity at 90°: square 210 x 210 mm Cutting capacity at 90°: flat 230 x 185 mm Hnedpefgyh Nefx Ab Rst Total power requirement: 1.2 kW Machine weight: approx. 240 kg Space requirement: approx. 870 x 1550 x 1740 mm The Zimmer Z241/R is a fully automatic down-feed saw for mitre cuts from 0° to 60° to the left. After completing the cut, the machine stops automatically via a safety limit switch. The down-feed rate is infinitely variable and can be adjusted through a hydraulic system. Raising the saw arm after the cut can be done to any desired position, and the saw arm will remain securely in your chosen position. The Z241/R comes equipped with the following features: Hydraulic cylinder, coolant pump, excenter clamp, base frame, saw blade, 400V plug (16A). The machine is delivered fully assembled and ready for immediate operation.

Būklė: naujas, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Blade speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.42 t Hnodpfxefgyh Tj Ab Rst Double miter metal bandsaw, GBS 250 Super AutoCut - Miter cuts up to 60° to the left and 45° to the right - Ball-bearing mounted rotary table - Quick-release vise - Heavy-duty, large material support - Automatic cooling system

Būklė: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 450x320 mm Saw band length 4250x34x1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitre cutting left and right 60° without machine conversion · 34 mm saw band width · Large material support turntable, ball bearing mounted · Saw band guides positioned via extra-wide linear guides · Heavy-duty, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Free-standing, safe and ergonomic control console · Storage space for saw bands and consumables · Cutting pressure and feed rate regulator · Fully hydraulic vice · Super-fast preclamp (front loading) · Material height sensor (automatic cut-start detection) Semi-automatic operation: 1. Clamp material 2. Start saw Hnodpfxefgyics Ab Rst 3. Rapid lower feed to material or start cutting for serial cuts 4. Stop saw band 5. Raise frame just above material 6. Release vice Optimal, material-independent cutting results through fine adjustment of the saw frame using: * Pressure control valve (cutting pressure-force) * Feed control valve (speed) * Switches with pictograms, easy and clear to operate

Būklė: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw band length: 5850 x 41 x 1.3 mm Band speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirement: approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for rapid cutting, K-tech 800H with pusher system P 15. P 30 (optional) Fast, smooth, and ergonomic cutting Specially designed for cutting profiles and beams, as well as solid material. The material is clamped vertically on the feed and discharge sides. Starting from the K-tech 800H, the machine comes standard with an additional horizontal clamping vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines are equipped as standard with the environmentally friendly “B&S Clean Cut Cutting System” featuring minimum quantity lubrication. Hnodjfgyifepfx Ab Rst This reduces cleaning effort and conserves resources. CNC Control A CNC control allows the programming of up to 90 cutting programs with different cutting lengths, quantities, and mitre angles. The B&S pusher system, feeding and positioning system, is equipped with “double-sided opening grippers” which are hydraulically operated. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal shape. The pusher system is mounted separately and is guided via ball-bearing linear guides, precision-ground rack, and a robust, frequency-controlled geared motor.

Būklė: naujas, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 1250 x 600 mm Saw blade length: 8140 x 54 x 1.6 mm Band speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 4.96 t Space required: approx. 5.7 x 4.0 x 2.75 m 2-column bandsaw for rapid cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams, as well as solid materials. Material clamping is performed vertically on the infeed and outfeed sides. From K-tech 800 H onward, the machine comes standard with an additional horizontal vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines come standard with the environmentally friendly “B&S Clean Cut Cutting System” featuring minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC control Hedpfofgyigox Ab Rjnt A CNC control allows programming up to 90 cutting programs with various cut lengths, quantities, and mitre angles. The B&S pusher system, feeding and positioning system, is equipped with “double-sided opening gripper jaws” that are hydraulically controlled. This ensures safe gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is designed as a separate unit and guided by precision linear ball guides, a ground rack, and a frequency-driven, robust gear motor.

Būklė: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Cutting capacity at 45 degrees: round 550 mm Cutting capacity at 45 degrees: square 550 mm Cutting capacity at 45 degrees: flat 550 x 600 mm Cutting capacity at 60 degrees: round 370 mm Cutting capacity at 60 degrees: square 370 mm Cutting capacity at 60 degrees: flat 370 x 600 / 450 mm Saw blade length: 7260 x 41 x 1.3 mm Hsdpfx Abjfg E Hms Rsnt Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.8 t Space requirement: approx. 5.85 x 3.7 x 2.7 m 2-column double mitre bandsaw for fast cutting, equipped with pusher system P15. Option: P30. Hydraulic saw frame lowering: • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system." An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor, combined with a reliable hydraulic brake via large-radial central positioning. The worktable runs on high-quality preloaded bearings, ensuring exceptionally smooth rotation. CNC control: A CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. Double-sided gripping positioning system: The B&S pusher, feed, and positioning system is equipped with "double-sided opening grippers" which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal form. The pusher system is built as a separate unit and runs on ball-bearing linear guides, precision ground rack, and is driven by a frequency-controlled, robust gear motor.

Būklė: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting capacity flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx. 8.45 t Dimensions (L x W x H): 4.485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer premium sawing technology and top performance when cutting specialty steels. • The electro-welded machine frame and the steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven with adjustable speed. • All machine movements (saw bow, vice, feed, saw band guides) operate via state-of-the-art linear guides with high static and dynamic load capacity, ensuring minimal sliding friction. Hodjfg E Hpjpfx Ab Rjnt • Another distinguishing feature is the material positioning rollers, which are hydraulically driven. They move perpendicular to the material, allowing for optimal clamping. • Thanks to height control of the saw blade position, the operator can set the band close to the material's top edge. After cutting, the band automatically returns to its previous position. Alternatively, the band can remain in the lower position. During the cutting cycle, the software compares the cutting load with preset values, enabling the sawing process to stop in case of anomalies. • The saw blade is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly quiet operation at a constant pressure. • Precision-ground carbide inserts clamp the saw blade, complete with lateral hardened and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw blade is tensioned via a hydraulic cylinder controlled by the machine software. The tension is automatically released after a specified time when the machine is idle or when a cycle has finished. • CNC-controlled automatic versions are available in the X-TECH 900 / 1200 models, featuring a 500 mm feeding length for high-production applications. • The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, ensuring precise positioning even at maximum load. • All guided movements are handled by four recirculating ball linear guides with high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Būklė: naujas, Cutting diameter round: approx. 355 mm Cutting diameter square: 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Hnodpfx Abjfg E Hzo Rot Band speed: 15 - 115 m/min Total connected load: 4.0 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, fully automatic hydraulic bandsaw machine in dual-column construction for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, installable on the right or left side of the machine. + Adjustable clamping pressure of the vices. + Feed conveyor with vertical rollers for lateral material support. + Numerically controlled bandsaw machine which can also be operated in semi-automatic mode, equipped with the new MEP 50 control system, specifically developed by MEP for automatic machines, based on Windows CE. + "Clean Cut" cycle: the feeder retracts the workpiece to prevent scoring on the cut surface when the band returns to the top at the end of the cut. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with 7" touch screen display and mechanical buttons for machine operations, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters.

Būklė: naujas, Cutting diameter: 250 mm Saw band length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t MEP Sawing Machine: - Saw frame, vise assembly, and base constructed from highly durable cast iron - Precision angle indicator on the cast iron structure - Electrical system (with fully identifiable wiring and 24V low voltage system) - IP 55 control lever for manual cycles (if applicable) - Rotating chip brush for cleaning the saw band - Quick-approach vise closure assembly - Accurate end stops with settings for miter cuts at 0°, 45°, and 60° to the left - Bi-metal saw blade, 2950 x 27 x 0.9 mm - Tools, operating instructions, and spare parts order manual provided in user’s language SHARK 281 – manual operation model; SHARK 281 CCS – manual operation with automatic cutting via gravity head-feed. CCS (Cut Control System) with: A) Switch for manual/automatic cutting mode Hnodpfxefg E H Ie Ab Rst B) Adjustable cutting speed C) Hydraulic brake with tank D) End-stop for band shutoff CCS is also available as an option for previously manufactured machines. Vise with quick adjustment Hydraulic indicator for band tension Electric coolant pump for band cooling and lubrication, with accessible coolant tray above the machine base On models with pneumatic vise (MA), the vise is opened and closed via a manual valve (pedal control available as an option)