Kompaktiškų Filtrų Sistema pirkti naudotą (7 501)

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Our high-performance sandblasting cabinet "MM 2010" operates using the pressure blasting method and, thanks to its innovative abrasive recycling system, is suitable for all types of blasting media. The integrated bucket elevator, which is firmly connected to the blasting cabinet, allows even the heaviest blasting media—such as stainless steel shot, cast steel, and other metallic abrasives—to be used without issue. Unlike competitor systems, the abrasive is not vacuumed back, but is conveyed via a flat conveyor system to the adjacent bucket elevator. The bucket elevator transports the material upwards and feeds it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed abrasive return and recycling system ensures continuous media supply at all times, independent of the extraction system's suction performance. Thanks to the media return system and innovative fan technology, the blast cabinet has a very low energy requirement (0.75 kW fan motor). Since the abrasive is not vacuumed back, there is no need for an oversized extraction unit with high power consumption, as required by many competing systems. For maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure vessel. This vessel includes a pressure regulator, allowing the blasting pressure to be continuously adjusted from 0.1 to 12 bar. For safe operation, a water separator is permanently installed on the blast vessel to protect the abrasive from moisture. The blasting nozzle is made of highly wear-resistant boron carbide, enabling service lives of up to 1,000 hours depending on the abrasive used. The blast chamber is lined with wear-resistant rubber, increasing abrasive service life and protecting the cabinet from wear. An air blow-off gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently attached cartridge filter extraction unit ensures optimal visibility in the blast chamber and maximum service life for the blasting media. The dedusting unit features continuous automatic cleaning of the filter cartridges by means of compressed air pulses. This ensures long filter media service life and consistent extraction performance. Loading of the blast chamber is via an angled front flap, which swings fully upwards. This enables loading of the blast cabinet by forklift or crane. The robust work grate can handle loads up to 500 kg. To ensure optimum visibility in the blast chamber, two high-performance and energy-efficient LED lights are mounted on the cabinet roof. Their rooftop installation protects them from dust and wear. Iodewc Nrnopfx Acuobc The system is operated via a modern touch display. For safe operation, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made from toughened safety glass and feature a protective foil to guard against wear.

Sąlyga: naudotas, Filtration system, extraction unit, clean air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year built 12 / 2004 Rated air volume 1451 m³/h Negative pressure 1398 Pa Filter area 18 m² Extraction inlet Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1500 mm) - Mechanical filter cleaning by oscillating motor - 2 discharge pipes underneath for dust collection sacks, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose coupling, fire brigade coupling for filter fires - Differential pressure switch for filter contamination detection - Without control unit (no controller included) - Mounted on 4 steel tube legs (square tube 40x40 mm) Height as per photos 3050 mm Footprint L x W 1850 x 1000 mm Weight approx. 400 kg Ijdpor R Ewlofx Acusbc Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Gamybos metai: 2004, Sąlyga: paruoštas naudoti (naudotas), A crossflow microfiltration unit from Pall Corporation for the wine industry is available. Filter modules: 16, filtration area: 344 m², flow rate: 160–240 l/h, inlet pressure range: 0.5 bar–3.5 bar, temperature range: -4°C to 25°C, max. cleaning temperature: 65°C. Machine dimensions (L/W/H): approx. 5100 mm / 1850 mm / 2700 mm, empty weight: approx. 3150 kg. The main pump of the machine has a slight leak. Documentation is available. On-site inspection possible. Isdpfxev Tnyyj Acujbc

Gamybos metai: 2023, Sąlyga: naujas, mašinos/transporto priemonės numeris: 011/2020, STK-10000i to niskokosztowy system próżniowy marki SAF TEKNIK, oferujący bardzo efektywną filtrację przy dużej mocy oraz wysokim przepływie powietrza! Wyposażony jest w kilka kolumn filtracyjnych oraz system oczyszczania filtrów poprzez wibracje. Dodatkowo, posiada separator większych elementów, który zapobiega uszkodzeniu całego układu. DANE TECHNICZNE: - Moc silnika: 11 kW - NOWOŚĆ: Przemiennik częstotliwości dla silnika głównego - Wydajność wyciągu: 10 000 m³/h - Prędkość powietrza: 41 m/s - Powierzchnia filtracyjna: 30 m² - Pojemność zbiornika: 810 litrów - Średnica króćca wlotowego: 355 mm Ijdpof D S Trjfx Acujbc - Masa: 740 kg - Wymiary: 3170 mm x 1200 mm x 2330 mm DOSTĘPNE SĄ TAKŻE INNE WERSJE: - STK-6500 (6 500 m³/h) - STK-8000 (8 000 m³/h)

Sąlyga: geras (naudotas), Exhaust gas filtration system, exhaust gas filter unit, exhaust gas filter, hot gas filter, industrial exhaust gas filter - Filter unit: Manufacturer/type unfortunately unknown - Flange dimensions: DN100 - Individual components: see photos - Dimensions: 2020/1630/H2490 mm / 1850/800/H800 mm - Total weight: 1292 kg Ibsdpfsg I D Nysx Acusc

Sąlyga: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Europac Filter System EP 704 DS Year of manufacture: 2013 S/n: 1340 2 filter bags, diameter 660 mm Extraction capacity approx. 5,100 m³/h Filter rating: 1 micron Motor power 7.5 kW, three-phase 400 V 50 Hz Sound level: 70–90 dB(A) Main outlet diameter: 250 mm Chip bags approx. 1.65 m³ Mobile platform (castors) Protection class IP54 Dimensions: 2.0 m x 1.65 m Height: 3,060 mm Weight: 300 kg Isdpotp Su Nsfx Acusbc Technical specifications subject to change.

Gamybos metai: 1975, Sąlyga: naudotas, Pressure filter unit with horizontally stacked filter elements. At the end of the filtration process, the kieselguhr is centrifugally discharged. Machine (Additional): Horizontal sieve filter Capacity: 140 hl/h Tank volume: 26 hl Length: approx. 4000 mm Width: approx. 2000 mm Height: approx. 3500 mm Material: Stainless steel 1.4541 (tank) Base construction: on legs Ibodjvcqpcepfx Acuec Equipment: Kieselguhr dosing vessel with dosing pumps; pumps; fittings; measuring technology.

Gamybos metai: 2021, Sąlyga: beveik kaip naujas (naudotas),

Sąlyga: nepatikrintas (naudotas), DCE Donaldson Dalamatic filter cabinet extraction system filter unit point filter dust extractor Filter surface area: 15 m² Ibjdpfx Acjwyf Rhoujc Filters cleaned by compressed air Equipped with low-noise enclosure Can be supplied fully reconditioned upon request. See our other listings.

Gamybos metai: 2024, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 15124, This system is an AME gravity belt filter unit of the PS series. The filter unit is used for the continuous cleaning of coolants and lubricants using the gravity principle. Ijdpjvrwwfefx Acujbc

Sąlyga: beveik kaip naujas (naudotas), Selection of our available used spare parts / accessories as well as consumables. Filter plates (various manufacturers) Filter cartridges Ijdpevvrq Ijfx Acusbc Pocket filters Filter hoses

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Velo-Filtersystem Ibsdown D Nropfx Acujc Im ausgezeichneten Zustand

Gamybos metai: 2022, Sąlyga: beveik kaip naujas (naudotas), Coolant system / belt filter unit 980L Manufacturer: Bürener Maschinenfabrik Ibodpfxov Hbv Uj Acusc Condition: new Equipment/features: 80 bar high-pressure pump + 2 auxiliary pumps for chip flushing, frequency control for high-pressure pump to adjust pressure, dual switch-over filter for fine filtration

Sąlyga: naudotas, Gamybos metai: 2018, Nominalus oro srautas: 5087 m³/h Dulkių slėgis (Pa): 2300 Variklis: 7,5 kW Matmenys: 1080 x 820 x 860 mm Svoris: 154 kg Sandėliavimo vieta: Nattheim Ibedpsvxk Ansfx Acuec

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8011510B, filtravimo plotas: 72 m², gamybos pajėgumas: 80 000 vienetas/val, Įranga: CE žymėjimas, TECHNINĖS DETALĖS Talpa: 80 000 m³/val. Filtro maišelių skaičius: 384 vnt. Filtro ilgis: 2 500 mm Filtro skersmuo: 230 mm Filtro plotas: 72 m² ĮRENGINIO DETALĖS Prijungimo galia: 15 kW Viršutinės dalies svoris su varikliais: 4 000 kg Tarpinės dalies svoris su filtro maišeliais: 4 000 kg Apatinės dalies svoris su kojomis: 2 000 kg Pagrindinis ventiliatorius: 12 vnt. Pagrindinio ventiliatoriaus galia: 15 kW Nominalus oro srautas: 22 m/s ĮRANGA Grįžtamosios linijos Valdymo skydas CE ženklinimas Gesinimo sistema Valdymo skydas Kratymo sistema Vakuuminė instaliacija Ibsdpfoxmgtzjx Acusc Pastaba: Įrenginys jau išmontuotas.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, veikimo valandos: 57 860 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 4903-0261, Placing a bid constitutes an obligation to collect the item within the specified period, by 15.11.2025 at the latest! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Search ID A20302860 Gildemeister GM 42-6, Year 2004: Search ID A20303020 Gildemeister GM 42-6, Year 2011: Search ID A20303110 Gildemeister GM 42-6, Year 2007: Search ID A20303190 Gildemeister GM 42-6, Year 2005: Search ID A20303220 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. across flats for hex material: 36 mm Max. bar size for square material: 29 mm Max. bar stroke in one station: 130 mm Max. bar stroke in two stations: 260 mm Max. stroke, radial slide: 52 mm Radial slide adjustment, fore/aft: ±20 mm Max. stroke, axial slide: 72 mm Max. rapid traverse speed: 9.6 m/min Max. stroke, tool spindles: 120 mm Adjustment, fore/aft: 10 mm MACHINE DETAILS Dimensions & Weight Iodpfxjxnxqbe Acuobc Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, incl. bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main Motor Rated output, main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 57,860 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables additional accessories

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 723-F07, TECHNINĖ INFORMACIJA Maksimalus įrenginio našumas: iki 24 000 butelių/val. (priklauso nuo modelio) Darbinis slėgis: standartinis 4,5 bar ±10 % Ibodpsxl Evrjfx Acuec Triukšmo lygis: tarp 75 ir 85 dB(A) ±2 dB pagal DIN EN ISO 11204 Talpyklų aukščio tolerancija Stikliniai indai: ±2,5 mm PET indai: ±2,5 iki ±6 mm MAŠINOS INFORMACIJA Bendri matmenys: 3 000 x 2 000 x 2 310 mm Svoris: 2 041,2 kg Įtampa: 230/400 V Dažnis: 50 Hz Fazės: 3 Srovė: 10 A Galia: iki 8,5 kVA (priklauso nuo modelio) Darbo sąlygos Darbo temperatūros intervalas: +5 °C iki +50 °C Darbinis slėgis (gamyboje): min. 5 bar, maks. 10 bar ĮRANGA Mašina gali veikti sinchroniškai su kitais įrenginiais arba savarankiškai. Tinka stikliniams ir PET indams, kuriems taikomos lanksčios tolerancijos.

Sąlyga: geras (naudotas), Gamybos metai: 2015, mašinos/transporto priemonės numeris: FS0B000351, įvesties srovės tipas: Oro kondicionierius, matavimo diapazonas Z ašis: 3 000 mm, bendras plotis: 260 mm, bendras ilgis: 310 mm, bendras aukštis: 100 mm, bendras svoris: 5 kg, aplinkos temperatūra (maks.): 40 °C, Įranga: dokumentacija / vadovas, Techninės specifikacijos: 3D taškų tikslumas: ≤ 1,0 mm Skenavimo patalpose tūris: iki 8 m³ IP klasė: IP52 Ibsdeqxa Nispfx Acuec Darbinė temperatūros riba: 0 – 40°C Būklės aprašymas: Pagrindinis skeneris ir lazeris: nepriekaištingos būklės Planšetė, kalibravimo plokštė ir priedai: gera būklė, yra smulkių įbrėžimų Transportavimo dėžė: matosi dėvėjimosi požymiai, tačiau skenerį apsaugo efektyviai Komplekte: Faro Freestyle-3D X skeneris Microsoft Surface Pro 3 planšetinis kompiuteris Kalibravimo sertifikatas MicroSD kortelė ir USB atmintinė Kalibravimo plokštelė Valymo rinkinys Sustiprinta transportavimo dėžė Naudotas įmonės. Visada po naudojimo laikytas dėžėje.

Sąlyga: geras (naudotas), Parduodu slėgio jėgos matuoklį HKM 5000N/500KG. Iodjvbwyljpfx Acusbc

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, veikimo valandos: 68 410 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 4903-0234, ašies skaičius: 6, veleno greitis (maks.): 2 700 aps./min, Strypo skersmuo (maks.): 42 mm, tekėjimo skersmuo: 42 mm, Įranga: strypų padavėjas, Placing a bid obligates you to collect the machine by the deadline of 15.11.2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, year 2005: Search ID A20302860 Gildemeister GM 42-6, year 2004: Search ID A20303020 Gildemeister GM 42-6, year 2011: Search ID A20303110 Gildemeister GM 42-6, year 2007: Search ID A20303190 Gildemeister GM 42-6, year 2007: Search ID A20303265 TECHNICAL DETAILS Maximum turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Iedpsxnxnyofx Acusbc Number of spindles: 6 Number of cross slides: 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. bar width across flats for hexagonal material: 36 mm Max. bar side length for square material: 29 mm Max. bar stroke in one station: 130 mm Max. bar stroke in two stations: 260 mm Max. stroke radial slide: 52 mm Radial slide adjustment, fore/aft: ±20 mm Max. stroke axial slide: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle stroke: 120 mm Adjustment, fore/aft: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Rated output of main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 68,410 h EQUIPMENT Bar feeder (length approx. 3,000 mm) Work tables Additional accessories

Sąlyga: labai geros būklės (naudotas), Hommel Werke LV-50E surface roughness measuring device. Ibsdpfx Acjvdybdjuoc

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, veikimo valandos: 55 585 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 4903-0266, ašies skaičius: 6, veleno greitis (maks.): 2 700 aps./min, Strypo skersmuo (maks.): 42 mm, tekėjimo skersmuo: 42 mm, Įranga: strypų padavėjas, Submission of a bid obligates the successful bidder to collect the machine by the deadline of 15/11/2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Search ID A20302860 Gildemeister GM 42-6, Year 2004: Search ID A20303020 Gildemeister GM 42-6, Year 2011: Search ID A20303110 Gildemeister GM 42-6, Year 2005: Search ID A20303220 Gildemeister GM 42-6, Year 2007: Search ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round stock: 42 mm Max. wrench size across flats for hex stock: 36 mm Max. cross section for square stock: 29 mm Max. bar stroke at one station: 130 mm Max. bar stroke at two stations: 260 mm Max. travel of radial slide: 52 mm Radial slide adjustment, fore/aft: ±20 mm Max. travel of axial slide: 72 mm Max. rapid traverse speed: 9.6 m/min Max. travel of tool spindles: 120 mm Adjustment, fore/aft: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar guide): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar guide: 10,000 kg Main Motor Rated power of main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 55,585 h Ibodpfx Aexnxm Ajcujc EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Additional accessories

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2011, veikimo valandos: 40 724 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8018030323B, ašies skaičius: 6, veleno greitis (maks.): 2 700 aps./min, Strypo skersmuo (maks.): 42 mm, tekėjimo skersmuo: 42 mm, Įranga: strypų padavėjas, Submitting a bid constitutes an obligation to collect the item by the deadline of 15.11.2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Search ID A20302860 Gildemeister GM 42-6, Year 2004: Search ID A20303020 Gildemeister GM 42-6, Year 2007: Search ID A20303190 Gildemeister GM 42-6, Year 2005: Search ID A20303220 Gildemeister GM 42-6, Year 2007: Search ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. bar across flats for hexagonal material: 36 mm Max. bar size for square material: 29 mm Max. bar stroke at one station: 130 mm Max. bar stroke at two stations: 260 mm Max. travel of radial slide: 52 mm Radial slide adjustment, forward/back: ±20 mm Max. travel of axial slide: 72 mm Max. rapid traverse speed: 9.6 m/min Max. travel of tool spindles: 120 mm Adjustment, forward/back: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main Drive Motor Rated power of the main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Iodpjxnxkhjfx Acujbc Operating hours: 40,724 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Additional accessories

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, veikimo valandos: 46 942 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 4903-0208, ašies skaičius: 6, veleno greitis (maks.): 2 700 aps./min, Strypo skersmuo (maks.): 42 mm, tekėjimo skersmuo: 42 mm, Įranga: strypų padavėjas, Submitting a bid obligates you to collect the machine within the deadline, until 15.11.2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Search ID A20302860 Gildemeister GM 42-6, Year 2011: Search ID A20303110 Gildemeister GM 42-6, Year 2007: Search ID A20303190 Gildemeister GM 42-6, Year 2005: Search ID A20303220 Gildemeister GM 42-6, Year 2007: Search ID A20303265 TECHNICAL DETAILS Maximum turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of cross slides: 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. bar flat size for hexagonal material: 36 mm Max. bar side length for square material: 29 mm Max. bar stroke per station: 130 mm Max. bar stroke in two stations: 260 mm Max. travel of radial slide: 52 mm Radial slide adjustment, fwd/rev: ±20 mm Max. travel of axial slide: 72 mm Max. rapid traverse speed: 9.6 m/min Max. travel of tool spindles: 120 mm Adjustment, fwd/rev: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main Motor Rated motor power: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Ibjdpfjxnxgpex Acujc Operating hours: 46,942 h EQUIPMENT Bar loader (length: approx. 3000 mm) Work tables Additional accessories

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, veikimo valandos: 69 287 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 4903-0238, ašies skaičius: 6, veleno greitis (maks.): 2 700 aps./min, Strypo skersmuo (maks.): 42 mm, tekėjimo skersmuo: 42 mm, Įranga: strypų padavėjas, Placing a bid obliges the buyer to collect the item on time by 15/11/2025! The following machines will also be sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2004: Listing ID A20303020 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2007: Listing ID A20303190 Gildemeister GM 42-6, Year 2005: Listing ID A20303220 Gildemeister GM 42-6, Year 2007: Listing ID A20303265 Isdpsxnxapefx Acuobc TECHNICAL DETAILS Maximum turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. bar flat size for hexagonal material: 36 mm Max. bar side length for square material: 29 mm Max. bar stroke at one station: 130 mm Max. bar stroke at two stations: 260 mm Max. radial slide travel: 52 mm Radial slide adjustment, fore/aft: ±20 mm Max. axial slide travel: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle stroke: 120 mm Adjustment, fore/aft: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Rated output main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 69,287 h EQUIPMENT Bar feeder (length: approx. 3,000 mm) Work tables Additional accessories