Tūptinės Sistema pirkti naudotą (7 039)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, krovimo aukštis: 60 mm, popieriaus svoris (min.): 40 g/m², didžiausias popieriaus svoris: 300 g/m², gamybos pajėgumas: 5 000 vienetas/val, Duplo Booklet Production System 5000 The offer includes: 1x Collating Tower DC-10/60 Transfer Unit LUL-HM Stapling and Folding Unit DBM-500 Front Trimmer DBM-500T Batch Counter DBM-K Long Delivery DBM-400LS DC-10/60 (10 stations) Dsdpfox Nimrex Ab Sekg Paper format: min. 120 x 148 mm; max. 350 x 500 mm Paper weight: 40–300 gsm Stack height: 60 mm per station Feeders: Suction/air separation feed Controls: Double sheet, miss feed, paper jam, empty station detection Power supply: 230 V, 50 Hz, 4.5 A, 1,035 W Dimensions: 630 mm x 750 mm x 1,972 mm Weight: 290 kg Folding and Stapling Unit DBM 500 Paper format: min. 120 x 170 mm; max. 350 x 500 mm Speed: 5,000 pcs/h for A5 4,600 pcs/h for A4 4,000 pcs/h for A3 Stapling capacity: 5 mm (50 sheets, 80 gsm) Folding capacity: 25 sheets Number of stapling heads: 2 Controls: Paper jam detection, sheet alignment display, low wire end indicator Memory capacity: 12 programs Folding/stapling modes: Folding only, saddle stitching with folding, corner stapling with folding, corner stapling, side/block stitching Power supply: 230 V, 50 Hz, 5 A, 1,150 W Dimensions: 1,610 mm x 770 mm x 1,020 mm Weight: 412 kg Front Trimmer DBM 500T Booklet format: min. 85 x 120 mm; max. 250 x 356 mm Trimmed final format: min. 75 x 120 mm Speed: >5,000 pcs/h Processing thickness: 50 sheets (80 gsm) Power supply: 230 V, 50 Hz, 3.3 A, 759 W Dimensions: 700 mm x 635 mm x 1,094 mm Weight: 241 kg

Sąlyga: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, bendras ilgis: 1 600 mm, bendras plotis: 1 100 mm, bendras svoris: 1 000 kg, bendras aukštis: 1 600 mm, Nėra minimalios kainos – garantuotas pardavimas aukščiausią kainą pasiūliusiam! Įrengimas parduodamas aukcione dėl įmonės uždarymo. Pateikus pasiūlymą įsipareigojama laiku pasiimti įrangą laikotarpiu nuo 2026-01-26 iki 2026-01-29! ĮRANGOS DUOMENYS Elektros duomenys Darbinė įtampa: 400 V Dažnis: 50 Hz Matmenys ir svoris Matmenys (I x P x A): 1.600 x 1.100 x 1.600 mm Svoris: 1.000 kg Dkodpfxsxqqnds Ab Sog

Gamybos metai: 2018, Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Wave soldering system with comprehensive equipment! Dkodpfxjx Nhhho Ab Sog A spare parts package worth approximately €20,000 is included in the scope of sale and delivery! The system comprises the following components: - Seho wave soldering system MWS 2340-F - Fluxer SelectFlux - Streamline transport system incl. lifts TECHNICAL DETAILS Preheating PULSAR: 2x convection and 5x Pulsar preheating zones (3,300 mm length) Wetting length soldering machine: 40 mm + 30 mm Return transport level: 405 mm elevated Finger conveyor: L-shape, short (3 mm) MACHINE DETAILS Number of processed solder frames: 1,060,540 units EQUIPMENT - Fluxer SelectFlux - Streamline transport system incl. lifts - Automatic solder bar feeding - Process gas purification system - Finger cleaning unit - Foldable convection top heating - Fan speed monitoring for convection preheating - Standard soldering unit - Wide solder nozzle unit, 7 nozzle rows - Solder frame transport system incl. 2 lifts - Cooling tunnel in the return transport of the soldering unit, incl. time control - Solder frame lowering station - Replacement filter for condensate trap at machine infeed and outfeed - Residual oxygen measurement with lambda sensor - Nitrogen-saving circuit - Transponder system for automatic changeover of soldering programs - Selective flux module (external module) - Flow sensor for flux per spray head - Flux storage tank with connections - Replacement filter for external spray fluxer module - upper and lower machine sections - Spare PC

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Pilnas KD impregnavimo autoklavas. Ilgis 18,0 m. Įskaitant bėgių vežimėlį. Įrenginys gali būti užpildomas iš abiejų pusių per bėgių sistemą, be to, katilas visiškai pasukamas išilgai ašies, kas užtikrina saugų impregnavimo medžiagos įsiskverbimą į medienos paketus. Dkedpfx Aboiyw Rbe Seg

Sąlyga: naujas, Gamybos metai: 2025, bendras ilgis: 600 mm, bendras plotis: 600 mm, bendras aukštis: 1 400 mm, garantijos trukmė: 12 mėnesiai, bendras svoris: 300 kg, įėjimo įtampa: 400 V, galia: 1,5 kW (2,04 AG), slėgis: 9,8 juosta, bakelio talpa: 50 l, RK50U – Universal forming system for the production of meat sticks, jerky & sausage snacks The HydroShpriz RK50U is a high-performance hydraulic filling and forming machine, developed for small and medium producers looking to start production of meat sticks, salami snacks, pet food, kibbeh, fruit bars and more. Ideally suited for dry-spiced snacks without alginate or natural casings. Compact, powerful, and easy to operate – the perfect entry-level solution with upgrade options available via our trade-in program. Djdpfemrpvyjx Ab Sjkg — Technical Specifications • Drive: hydraulic piston • Piston force: 94 kN • Power: 1.5 kW, 380 V, 50 Hz • Dimensions: 1050×550×950 mm • Weight: approx. 300 kg • Material: fully stainless steel construction • Certification: CE-certified, suitable for continuous operation (8 hrs) — Equipment & Features • Gear-type filling system – for dense, viscous mixes down to –2 °C • Multi-nozzle head: up to 25 shapes simultaneously • Round nozzle set: 8–22 mm diameter (sticks) • Flat nozzle set: 25–200 mm width, 3–5 mm height (jerky, strips) • Sausage-filling set: for traditional casing sausage • Layering attachment: direct forming onto rack grids • Compatible with drying trolleys: 30 levels, 60 racks • Integrated time-controlled dosing: accuracy ±8 % • 24 V remote signal connector: for automatic clip machines (PolyClip, Compa, etc.) • Optional vacuum connection – for firmer texture, extended shelf life — Production Output • From 20 kg up to 1,600 kg per 8 hours, depending on product, form and nozzle system — Stock Availability ✔️ Immediately available through official distributors in: • Austria • Poland • United Kingdom • Lithuania • Australia • South Africa • USA Worldwide shipping, product training & spare parts included.

Sąlyga: naujas, Gamybos metai: 2024, Fiber Laser Cutting System FLV-3015-OE 2kW / VF1530-2000W Technical Specifications - Maximum sheet dimensions: 3000 x 1500 mm - X and Y axis positioning accuracy: ± 0.05 mm/m - Repeatable positioning accuracy X and Y axis: ±0.03 mm - Maximum speed: 40,000 mm/min - Maximum acceleration: 0.5G - Maximum load capacity: 1200 kg - Power output: 2.0 kW - Power requirement: 15.0 kW - Source brand: MAX Photonics - Power supply: ~3x400 V 50 Hz - Protection class: IP54 - Length: 4500 mm Djdpfsphpfasx Ab Sskg - Width: 2300 mm - Height: 1920 mm Cutting Depth: - Steel S235: recommended 16.0 mm, maximum 20.0 mm - Stainless steel: recommended 6.0 mm, maximum 8.0 mm - Aluminum: recommended 4.0 mm, maximum 6.0 mm - Brass: recommended 4.0 mm, maximum 5.0 mm Design - Construction type: welded - Number of support legs: 8 - Servo drives: Schneider - Helical gears and racks - Linear guides: HIWIN - Gearboxes: Motovario - Gear racks: YYC - Ball bearings: NSK - Pressure valves: SMC - Cooling: Water chiller Automatic lubrication system for axis guides. User-Friendly Operation Loading heavy sheets is facilitated by transport balls integrated in the table top, ensuring smooth sliding during loading. Removing small finished parts is also much easier thanks to trolleys located beneath the machine, which can be conveniently pulled out using a handle. RayTools cutting head with autofocus Otinus Protect (optional*) This product offers individual protection for your laser source. This service ensures continuous operation in your company. We safeguard your business so you can complete your orders on time. Control Panel The computer runs on Windows 10 and CypCut software for part processing, with features such as designing, file import/export, and workflow optimization. All installed programs include lifetime licenses. The machine is equipped with a wireless controller. Professional Support We ensure continuous support for our customers. When you purchase a machine, we include a package of expert support hours from Otinus technicians. Otinus Academy Learning Software With your purchase, you receive one year of access to online courses, allowing you to seamlessly train a new employee or refresh skills learned during trainings! Machine Delivery Includes A 2-day operator training and machine installation - 1st day up to 8 hours – commissioning and control training - 2nd day up to 8 hours – independent machine operation under supervision of our technician – programming of specific details possible. Consultation with our specialists - By phone: from 7:30 to 21:00 (Mon–Sat) – 8-hour package to be used within 12 months. - Online: from 7:30 to 14:30 (Mon–Fri) – 8-hour package to be used within 12 months. Access to Otinus Academy online courses - LibreCad – access within 12 months You also receive - CAD drawing package

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, krovimo aukštis: 60 mm, popieriaus svoris (min.): 40 g/m², didžiausias popieriaus svoris: 300 g/m², gamybos pajėgumas: 5 000 vienetas/val, Duplo Brochure Production System 5000 The offer includes: 2x Collating Tower DC-10/60 Transfer Unit LUL-HM Stitch-Fold Unit DBM-500 Front Trimmer DBM-500T Batch Counter DBM-K Long Delivery Stacker DBM-400LS 2x DC-10/60 (20 stations) Paper size: min. 120 x 148 mm; max. 350 x 500 mm Paper weight: 40–300 gsm Stack height: 60 mm per station Feeder: Suction/Blow Air Controls: Double sheet, miss sheet, paper jam, station empty detection Power supply: 230 V, 50 Hz, 4.5 A, 1,035 W Dimensions: 630 mm x 750 mm x 1,972 mm Weight: 290 kg Stitch and Fold Unit DBM-500 Paper size: min. 120 x 170 mm; max. 350 x 500 mm Speed: 5,000 cycles/h (A5) 4,600 cycles/h (A4) 4,000 cycles/h (A3) Dksdpfxjx Niupj Ab Sjg Stapling capacity: 5 mm (50 sheets, 80 gsm) Folding capacity: 25 sheets Number of stitch heads: 2 Controls: Paper jam detection, paper position display, end of wire Memory: 12 jobs Folding and stapling modes: Folding without stapling; saddle stitching/folding; corner stitching/folding; corner stitching; block/side stitching Power supply: 230 V, 50 Hz, 5 A, 1,150 W Dimensions: 1,610 mm x 770 mm x 1,020 mm Weight: 412 kg Stitch Unit Counter Reading (see photos) Counter left: 1,392,871 Counter right: 5,218,991 Front Trimmer DBM-500T Booklet size: min. 85 x 120 mm; max. 250 x 356 mm Trimmed final size: min. 75 x 120 mm Speed: >5,000 cycles/h Processing thickness: 50 sheets (80 gsm) Power supply: 230 V, 50 Hz, 3.3 A, 759 W Dimensions: 700 mm x 635 mm x 1,094 mm Weight: 241 kg

Gamybos metai: 2019, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Roboter-Laser-Schweißsystem zum Schweißen von Stahl und Edelstahl. Lieferumfang: 1 x YASKAWA 6-Achs-Roboter, Typ YASKAWA MH6 (Traglast: 6 kg, Reichweite: 1.422 mm, Robotergewicht: 130 kg, Baujahr: 03/2009) 1 x YASKAWA DX100 Steuerung (Baujahr: 03/2009) 1 x IPG YLS-1000 Ytterbium-Laser, 1 kW (Baujahr: 05/2011) 1 x IPG P30 Laser-Schweißkopf mit koaxialer Düse und Kamera (Baujahr: 05/2018) Dkodpfx Ash Ad E Hob Ssg 1 x RIEDEL Kühlwasser-Umwälzanlage für den Laser (Baujahr: 2011) 1 x Chilly-35-S Kühlwasser-Umwälzanlage für die Optik (Baujahr: 2010) 1 x Siegmund-Schweißtisch 1200x800 mm (Baujahr: 2019) 1 x IPG Welding Head Alarm Module Box WHAM (Baujahr: 05/2018) 1 x PC für den Laser mit LaserNet-Software Die Maschine kann besichtigt werden. Sehr guter Zustand, angeschlossen und vorführbereit. Lieferung in EU-Länder erfolgt durch uns, die Versandkosten sind inklusive.

Sąlyga: naudotas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Zu verkaufen: Industrieller hydraulischer Holzimprägnier-Tauchtank, geeignet für professionelle Holzschutz- und Konservierungsverfahren. Die Anlage ist für die Volltauch-Imprägnierung von Holz mit Holzschutzmitteln ausgelegt und mit einem hydraulischen Hebe- und Presssystem ausgestattet. Hergestellt von Wichman. Komplettsystem inklusive Tank, Hydraulikeinheit, Hebeplattform, Spannrahmen und Schaltschrank. Technische Daten Gesamtlänge: ca. 6,5 Meter Einsatzbereich: Holzimprägnierung / Tauchen / Konservierung Betriebsart: hydraulisch Steuerungsmodi: manuelle & automatische Tauchprogramme Dkodpfxsx Ngk Ie Ab Sog Stromversorgung: - 380–400 V (3-Phasen) - 220–230 V (Steuerstromkreise) Hydraulikölmenge: ca. 30 L Hydraulikölt: HL046 (HL032 für Betrieb unter 0°C) Tauchprogramme (automatisch, einstellbar): - Manueller Modus - 2 Minuten - 7 Minuten - 14 Minuten (10 Min + Pause + 4 Min) - 21 Minuten (15 Min + heben + 6 Min) Im Lieferumfang enthalten: - Stahltauchtank für Imprägnierung - Hydraulische Hubplattform - Oberer Press-/Spannrahmen - Hydraulikaggregat - Elektrischer Schaltschrank - Original-Betriebsanleitung

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1978, AUTOCLAVE Scholz A wood autoclave is a specialized device used for the pressure impregnation of timber. It is a hermetically sealed chamber in the shape of a large, thick-walled cylinder, in which the process of saturating wood with protective agents is carried out. The impregnation process in autoclaves takes place in several stages: 1. The wood is placed in a tightly closed chamber. 2. A vacuum is created, removing air from the wood cells. 3. The chamber is flooded with the preservative. 4. Then, high pressure is applied, forcing the protective agent deep into the wood structure. 5. Finally, negative pressure is reapplied to fix the preservative. Dedpfx Ast Tq Szsb Sokg Pressure impregnation in autoclaves ensures deep and uniform penetration of preservatives, which significantly increases the durability and resistance of the wood to degrading factors such as moisture, insects, and fungi. Timber treated in this way can last up to 20 years under harsh outdoor conditions. TECHNICAL DATA: Manufacturer: Scholz Year: 1978 Capacity: 44,200 l Weight: approx. 20 t Length: 14.5 m Width: 2 m Internal trolley rails Pressure: 16 bar Operating temperature: 203°C (397°F) Autoclave with full equipment, in very good condition.

Sąlyga: geras (naudotas), Gamybos metai: 2007, For sale: Kelch Seca 04E measuring device. Dedpfjug T Hmsx Ab Sskg

Sąlyga: naujas, Gamybos metai: 2024, Many of our machines are available from stock. Call us to learn more! The offer refers to the basic version of the machine. All optional equipment and their prices can be found on our website. Fiber Laser Cutting System FLV-6025-OT-6022 3kW Technical specifications - Maximum sheet size: 6000 x 2500 mm - Maximum profile height: 220 mm - Maximum profile length: 6000 mm - Positioning accuracy (X and Y axis): ±0.05 mm/m - Repeatable positioning accuracy (X and Y axis): ±0.03 mm - Maximum speed: 60,000 mm/min - Maximum acceleration: 0.7G - Maximum load capacity: 1200 kg - Power output: 3.0 kW - Power consumption: 12.0 kW - Source brand: Raycus or MAX Photonics (selectable) - Supply: ~3x400 V 50 Hz - Protection class: IP54 Construction Thanks to its welded design, the machine is extremely stable. High-speed motion of the cutting head with exceptional precision is achieved using Japanese Fuji servo drives. Rotary Axis for Profile Cutting The machine is equipped with a rotary axis for profile cutting. - Maximum profile length: 6000 mm - Profile clamping diameter: 220 mm Automatic lubrication system for axis guides. Operator convenience The loading of heavy sheets is facilitated by transport balls embedded in the table surface, ensuring smooth sliding while loading. Retrieving small finished parts is also made much easier thanks to carriages under the machine, which can be conveniently pulled out using a practical handle. RayTools Cutting Head with Autofocus Dsdpfxotiy Scs Ab Sekg Otinus Protect (optional*) This product offers individual protection for your laser source. This service ensures continuity of operation at your company. We safeguard your business, so you can fulfill your orders on time. Voltage Stabilizer (optional*) Control panel The computer runs on Windows 10 with CypCut software for processing functions such as: design, file import/export, job optimization. All installed programs come with lifetime licenses. The machine is equipped with a wireless controller. Professional support We are committed to maintaining constant contact with our customers. Therefore, purchase of the machine includes an hourly support package from Otinus technicians. Otinus Academy learning software With the purchase of this machine, you receive one year’s access to online courses—ideal for onboarding new staff or refreshing knowledge gained from training sessions! Included with the machine: A 3-day training and machine installation: - Days 1 & 2: up to 8 hours – commissioning and control system training - Day 3: up to 8 hours – independent work on the machine under supervision of our technician, including custom programming of specific parts. Consultation with our specialists: - By phone: 7:30 to 21:00 (Mon–Sat) – 8-hour package to be used within 12 months - Online: 7:30 to 14:30 (Mon–Fri) – 8-hour package to be used within 12 months Access to Otinus Academy online courses: - LibreCAD – access for 12 months Additionally, you receive: - CAD drawing package

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, For sale: Used TruLaser 3530 laser cutting system. Technical data: - Operating hours: Beam on 2,955 h / Laser on 15,464 h - X-axis travel: 3,000 mm (max. 3,104 mm) - Y-axis travel: 1,500 mm (max. 1,580 mm) - Xp-axis travel: 300 mm (max. 305 mm) - Z-axis travel: 114 mm - Max. material thickness: 20 mm - Maintenance-free three-phase motors on X1, X2, Xp, Y1, Y2, and Z axes - Max. positioning speed (parallel to axes): 120 m/min - Simultaneous positioning speed: 170 mm/min - Acceleration during positioning: X-axis 9 m/s² - Xp + Y-axis: 15 m/s² - Cutting speed X-axis: 4 m/s - Cutting speed Xp and Y-axis: 15 m/s Standard equipment: - Enclosed machine frame with integrated laser resonator - Drive unit for optimal processing speeds - Additional high-dynamic Xp-axis - Automatic pallet changer - Enclosed beam guidance - NitroLine, high-pressure cutting - FocusLine, constant focal point positioning - Air cutting - PierceLine, reduced piercing process - PlasmaLine, plasma monitoring sensors - SprintLine, rapid processing - LensLine - FlyLine - ContourLine, for drilling small holes - Microweld - Spraying unit Dsdpfsixl Tnex Ab Sskg - Positioning laser diode - Programmable cutting gas pressure - Automatic shut-off function - Work area lighting - TruTops Laser lite - CO2 laser TruFlow 3200 with high-frequency excitation, mirror telescope, and maintenance-free turbo radial fan - Laser control TASC 3, logbook function, and chiller unit - Laser cutting head with 5” and 7.5” lenses and quick-change device - ControlLine, capacitive height control and process regulation - Sinumerik 840D controller: open control system - Error cause diagnosis via diagnostic functions Extended machine features: - Pallet change system - Laser cutting heads: 5” and 7.5” - Additional laser cutting head with 3.75” lens for high-speed cutting - Dimensions (mm): approx. 9,300 x 4,600 x 2,000; weight (kg): approx. 11,500 Year of manufacture: 2008 Special price: €55,000 net The machine is dismantled. Inspection possible by prior arrangement. If interested, please contact us.

Gamybos metai: 2019, Sąlyga: beveik kaip naujas (naudotas), Laser-Schweißroboteranlage zum Schweißen von Stahl und Edelstahl. Lieferumfang: 1 x YASKAWA 6-Achs-Roboter YASKAWA HP20D (Traglast: 20 kg, Reichweite: 1.717 mm, Robotergewicht: 280 kg, Baujahr 01/2009) 1 x YASKAWA DX100 Steuerung (Baujahr 02/2009) 1 x LASERLINE LDM 1200-60 Diodenlaser, 1.320 W (Baujahr 10/2015) Dsdeh Aiy Sjpfx Ab Sjkg 1 x LASERLINE Laserschweißkopf OTS-5 mit Crossjet und Kamera (Baujahr 12/2017) 1 x HYFRA Sigma7 2-Fach-Kühlwasserkreislaufsystem für Laser und Optik (Baujahr 2018) 1 x Siegmund Schweißtisch 1200 x 800 (Baujahr 2019) Die Maschine kann besichtigt werden. Sehr guter Zustand. Angeschlossen, kann vorgeführt werden. Versand in EU-Länder übernehmen wir, die Versandkosten sind kostenlos.

Sąlyga: labai geros būklės (naudotas), Ventiliatoriaus variklis 15 kW Įėjimas 35 cm, išėjimas 35 cm Ventiliatoriaus variklis 3 kW, įėjimas 20 cm, išėjimas 20 cm Aukštis 520 cm Dksdpfxox N Scvo Ab Seg Plotis 200 cm Ilgis 240 cm Karšto oro grąžinimo vamzdis Ilgis 570 cm, plotis 55 cm, išėjimas 80 cm 3 vamzdžiai su magnetais

Sąlyga: naudotas, Gamybos metai: 2002, Šiluminė galia: 10,5 kW Darbinis slėgis: 2,2 - 2,8 bar Krepšelio matmenys: 700 x 1410 mm Keliamoji galia: 500 kg Djdsx Sr E Aepfx Ab Sjkg Naudojamas aukštis: 675 mm Maks. užpildymo kiekis valymo skysčiu: 380 l Galia: 10,8 kW Svoris: apie 420 kg Mūsų vertinimu, įrenginys yra geros naudotos būklės ir gali būti apžiūrėtas prijungtas prie elektros pagal susitarimą. Priedai, pavaizduoti įrankiai ir tvirtinimo priemonės į pristatymo apimtį įtraukiami tik jei tai nurodyta papildomoje informacijoje. Techninių duomenų ir informacijos pakeitimai bei klaidos, taip pat tarpinis pardavimas galimi!

Sąlyga: naujas, Gamybos metai: 2024, Attention – Special Offer!! First warranty inspection completely free of charge: Special offer valid exclusively for customers who have participated in a demonstration prior to purchase – at the Otinus Machinery Showroom in Bydgoszcz Dkodpfstiyztox Ab Sog Fiber Laser Cutting System "FLV-3015-C2 1.5kW" Technical Specifications: - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - X and Y axis repeatability: ±0.03 mm - Maximum speed: 120,000 mm/min - Maximum acceleration: 1.5 G - Output power: 3 kW - Source brand: Raycus or "MAX Photonics" – selectable - Power supply: ~3×400 V, 50 Hz - Protection class: IP54 Cutting Capacity: - Mild steel: recommended up to 12 mm, maximum 16 mm - Stainless steel: recommended up to 5 mm, maximum 6 mm - Aluminium: recommended up to 3 mm, maximum 4 mm - Brass: recommended up to 2 mm, maximum 3 mm Construction: The machine features outstanding stability due to its welded frame and heavy-duty legs. High head movement speeds and superior precision are achieved thanks to high-quality Japanese Fuji servo drives operating on robust linear guides and helical rack-and-pinion systems. The ABLS system ensures automatic lubrication of the axis guides. RayTools Auto-Focus Cutting Head Control Panel: The fiber laser cutting system is equipped with a control panel comprising a screen, mouse, and keyboard for user-friendly operation. The integrated computer runs Windows 10 and CypCut software, offering the following functions: - Design creation - File import and export - Optimization of performance and cutting speed Expert Support: We prioritize continuous communication with our clients. To this end, every machine comes with a dedicated hour package for remote support by Otinus specialists. As part of the service, our staff can: - Create or revise CAD drawings - Advise on material and tool selection - Assist with choosing operating parameters for different materials The remaining consulting hours can be monitored via the Otinus customer panel. Scope of Delivery: - Two-day training and machine installation - Day 1: up to 8 hours – commissioning and control system training - Day 2: up to 8 hours – independent machine operation under technician supervision, including programming of specific parts - Specialist advice: - By phone: 7:30–21:00 (Mon–Sat), 8-hour package valid within 12 months - Online: 7:30–14:30 (Mon–Fri), 8-hour package valid within 12 months - Access to Otinus Academy online courses: - LibreCAD – 12-month access - Additionally included: - CAD drawing package

Sąlyga: naujas, Gamybos metai: 2024, CNC Plasma Cutting System PCO-2512-D The machine was developed and built in Poland. Technical Specifications - X and Y working area: 1270 x 2600 mm - Clearance between table surface and gantry: 240 mm - Maximum height of profile to be cut: 200 mm - Rapid traverse speed (Cutting speed depends on power of the plasma source and material thickness): 25,000 mm/min - Compatible with Hypertherm Powermax 45-125 plasma sources, as well as Hypertherm MAXPRO200 Construction Parameters: - Length: 3,150 mm - Width: 2,030 mm - Height: 1,500 mm - Total weight: 950.0 kg - Maximum load capacity: 1,250.0 kg - Adjustable support feet: 6 Systems THC – Torch Height Controller – integrated torch height control system automatically adjusts the torch-to-material distance based on real-time analysis of arc voltage fluctuations. AMS – Align Material System – automatically corrects material angle information relative to the table. Visit Us and Test Our Machines Participate in a comprehensive demonstration, where a qualified Otinus technician will present the full functionality of the machine. You will also have the opportunity to test how the equipment suits your requirements. You can provide your own technical drawings and sample materials. Otinus Academy Learning Software (optional) This is a continuously expanding e-learning platform created for Otinus brand customers. By purchasing this equipment, you receive one year of access to online courses to easily onboard new personnel or refresh knowledge from previous training. On-site Commissioning and Operator Training at Customer Location (optional) - Day 1 (up to 8 hours) – Machine installation and training on the operation of the control system. Telephone Support by a Specialist (optional) - Telephone: 7:30 am to 9:00 pm (Mon–Sat) – Eight-hour support package to be used within 12 months. - Online: 7:30 am to 2:30 pm (Mon–Fri) – Eight-hour support package to be used within 12 months. Access to Otinus Academy Online Courses (optional) - MyPlasm – 12 months access Djdoh E Iy Eepfx Ab Sekg - LibreCad – 12 months access

Sąlyga: naujas, Gamybos metai: 2024, Fiber Laser Cutting System FLV-3015-OE 1.5kW / VF1530-1500W Technical Specifications - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable X and Y axis positioning accuracy: ±0.03 mm - Maximum speed: 40,000 mm/min - Maximum acceleration: 0.5 G - Maximum load capacity: 1200 kg - Power output: 1.5 kW - Power consumption: 12.0 kW - Laser source brand: MAX Photonics - Power supply: ~3x400 V 50 Hz - Protection rating: IP54 - Length: 4500 mm - Width: 2300 mm - Height: 1920 mm Cutting Thickness - Carbon steel: recommended 12.0 mm, maximum 16.0 mm - Stainless steel: recommended 5.0 mm, maximum 6.0 mm - Aluminum: recommended 3.0 mm, maximum 4.0 mm - Brass: recommended 2.0 mm, maximum 3.0 mm Construction - Design type: welded - Number of support legs: 8 - Servo drives: Schneider - Gear and racks: helical-toothed - Linear guides: HIWIN - Gearbox: Motovario - Racks: YYC - Ball bearings: NSK - Pressure reducer: SMC - Cooling: water chiller Automatic lubrication system for axis guides. Convenient Operation Loading of heavy metal sheets is facilitated by integrated transport balls, allowing smooth sliding during loading. The collection of small finished parts is also easier thanks to trays located underneath the machine, which can be pulled out with a practical handle. RayTools cutting head with autofocus Option — Otinus Protect This product provides customized protection for your laser source. With this service, you ensure the continuity of your business operations is safeguarded. We secure your business so you can complete your jobs on schedule. Control Panel The computer operates on Windows and uses CypCut software, providing functions such as design, file import and export, and job optimization. Installed programs come with lifetime licenses. The machine is equipped with a wireless controller. Professional Support We maintain ongoing contact with our customers. For this reason, we include an Otinus Specialist Assist hour package with every purchased machine. Otinus Academy Learning Software With the purchase of this device, you receive one year of access to online courses, allowing you to train new staff or refresh training knowledge. Free Drawing Package Every Otinus laser cutting system comes with a package of ready-to-use CAD drawings. Included in the Machine Price 2-day commissioning and operator training - Day 1 (up to 8 hours): Commissioning and control system instruction. - Day 2 (up to 8 hours): Independent machine operation under our technician’s supervision – including customer-specific part programming. Expert Advice - By telephone: from 7:30 to 21:00 (Mon–Sat) – 8-hour package valid within 12 months. Dkjdpfx Aophm Slsb Ssg - Online: from 7:30 to 14:30 (Mon–Fri) – 8-hour package valid within 12 months. Access to online training courses - LibreCad – 12 months’ access Additionally included - CAD drawing package

Sąlyga: naujas, Gamybos metai: 2024, Fiber Laser Cutting System FLV-3015-OE 3kW / VF1530-3000W Technical Specifications - Maximum sheet size: 3000 x 1500 mm - X and Y-axis positioning accuracy: ±0.05 mm/m - Repeatable X and Y-axis positioning accuracy: ±0.03 mm - Maximum speed: 60,000 mm/min - Maximum acceleration: 0.7 G - Maximum load capacity: 1200 kg - Laser output power: 3.0 kW - Power consumption: 24.0 kW - Laser source brand: Choice of Raycus or MAX Photonics - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Cutting Thickness - Carbon steel: recommended thickness 20.0 mm, maximum thickness 22.0 mm - Stainless steel: recommended thickness 8.0 mm, maximum thickness 10.0 mm - Aluminum: recommended thickness 6.0 mm, maximum thickness 8.0 mm - Brass: recommended thickness 5.0 mm, maximum thickness 6.0 mm Construction The machine offers excellent stability due to its welded frame. Japanese Fuji servo drives ensure high speed with superior precision. Automatic lubrication system for axis guides. Convenient Operation Loading heavy sheets is simplified with integrated transport balls, which enable smooth sliding during loading. Small finished parts can be easily removed thanks to trolleys under the machine, which are fitted with practical handles for easy extraction. RayTools cutting head with autofocus Option - Otinus Protect This product offers customized protection for your laser source. With this service, you ensure your business continuity is safeguarded. We secure your operations so you can fulfill orders on time. Option - Voltage Stabilizer Control Panel The system operates on Windows and comes with CypCut software, offering functions such as designing, file import/export, and workflow optimization. Installed software includes lifetime licenses. Djdpfx Aophpfljb Sjkg The machine features a wireless controller. Professional Support We maintain close contact with our clients. For this reason, every purchased machine includes an Otinus Specialist Assist hourly package. Otinus Academy Learning Software Purchasing this device includes one year of access to online training courses—ideal for onboarding new employees or refreshing training knowledge. Free Drawing Package Every Otinus laser cutting system comes with a package of ready-to-use CAD drawings. Included in the Price 2-day commissioning and operator training - Day 1 (up to 8 hours): Commissioning and controls training - Day 2 (up to 8 hours): Independent operation on the machine under our technician’s supervision—with an opportunity for custom workpiece programming Professional Consultation - Phone: 7:30–21:00 (Mon–Sat) – 8-hour package valid for 12 months - Online: 7:30–14:30 (Mon–Fri) – 8-hour package valid for 12 months Access to Online Training Courses - LibreCad – 12-month access Additionally included - CAD drawing package

Sąlyga: naujas, Gamybos metai: 2024, Many of our machines are available from stock. Call us to learn more! The offer refers to the basic version of the machine. All optional equipment and their prices can be found on our website. Fiber Laser Cutting System FLV-6025-C2 30kW Technical Specifications - Maximum sheet size: 6000 x 2500 mm - Positioning accuracy of X and Y axes: ±0.05 mm/m - Repeatable positioning accuracy of X and Y axes: ±0.03 mm - Maximum acceleration: 1.5G - Maximum load capacity: 3840 kg - Power: 30.0 kW - Power requirement: 156.0 kW - Source brand: Raycus or MAX Photonics, selectable - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Construction The machine is extremely stable due to its welded design. High-speed movement of the head with optimal precision is ensured by Japanese Fuji servo drives. Automatic lubrication system for axis guides. Convenient Operation Loading heavy sheets is facilitated by transport balls integrated into the worktable, allowing for easy sliding during loading. Collecting small finished parts is also much easier thanks to drawers located beneath the machine, which can be pulled out using a practical handle. RayTools cutting head with autofocus Otinus Protect (optional*) This product offers tailored protection for your laser source. With this service, you ensure uninterrupted operation in your company. We secure your business so that you can complete your orders on time. Voltage stabilizer (optional*) Control Panel The computer runs on Windows 10 and features CypCut software for processing, supporting functions such as design, file import/export, and work optimization. All installed programs come with a lifetime license. The machine is equipped with a wireless controller. Professional Support We ensure constant communication with our customers. That’s why, when you purchase a machine, we include an hourly support package for expert assistance from Otinus technicians. Otinus Academy Learning Software When you purchase this machine, you receive one-year access to online courses, enabling you to easily onboard new staff or refresh knowledge from previous training! Machine Delivery Includes: - 2-day training and machine installation - Day 1: up to 8 hours – commissioning and training on controls - Day 2: up to 8 hours – independent work on the machine under the supervision of our technician, including programming of specific components. - Consultation from our specialists - By phone: 7:30 AM to 9:00 PM (Mon-Sat) – an 8-hour package to be used within 12 months. - Online: 7:30 AM to 2:30 PM (Mon-Fri) – an 8-hour package to be used within 12 months. - Access to Otinus Academy online courses - LibreCad – access within 12 months Additionally, you receive: Dkodsthh Uvepfx Ab Sjg - CAD drawing package

Sąlyga: naujas, Gamybos metai: 2024, Many of our machines are available from stock. Call us to learn more! The offer applies to the machine's basic version. All optional equipment and their prices can be found on our website. Fiber Laser Cutting System FLV-6025-C2 1.5kW Technical Data - Maximum sheet size: 6000 x 2500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - X and Y axis repeatable positioning accuracy: ±0.03 mm - Maximum acceleration: 1.5G - Maximum load capacity: 3840 kg - Power: 1.5 kW - Power consumption: 109.0 kW - Laser source brand: Raycus or MAX Photonics selectable - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Construction Thanks to the welded frame, the machine is highly stable. High-speed and precision head movement is ensured by Japanese Fuji servo drives. Automatic lubrication system for axis guides. User-friendly Operation Loading heavy sheets is made easier by transport balls integrated into the table surface, allowing sheets to slide smoothly into place. Retrieving small finished parts is also much easier, thanks to drawers under the machine that can be pulled out using a convenient handle. RayTools cutting head with autofocus Otinus Protect (optional*) This product provides individual protection for your laser source. With this service, you can ensure operational continuity for your business. We secure your work so you can complete your orders on time. Voltage stabilizer (optional*) Control Panel The computer operates with Windows 10 and CypCut software for processing, with features including design, file import/export, and work optimization. All installed programs come with lifetime licenses. The machine is equipped with a wireless controller. Professional Support We ensure ongoing communication with our customers. That’s why, when you purchase a machine, we offer an hourly package for professional support from Otinus technicians. Otinus Academy Learning Software With the purchase of this machine, you get one year of access to online courses, allowing you to easily onboard new employees or refresh training knowledge! Included with the Machine A 2-day training and machine installation Dkedpfx Abothh Rvo Seg - Day 1 up to 8 hours – commissioning and control training - Day 2 up to 8 hours – independent operation of the machine under the supervision of our technician, with the ability to program specific parts. Consultation with our specialists - By phone: 7:30 a.m. to 9:00 p.m. (Mon-Sat) – an 8-hour package to be used within 12 months. - Online: 7:30 a.m. to 2:30 p.m. (Mon-Fri) – an 8-hour package to be used within 12 months. Access to Otinus Academy online courses - LibreCad – 12 months’ access Additionally, you will receive - CAD drawing package

Sąlyga: naujas, Gamybos metai: 2024, Attention – Special Offer!! First Warranty Inspection Completely Free of Charge: Special offer only for customers who participated in a demonstration before purchase – at the Otinus Machinery Showroom in Bydgoszcz. Some of our machines are AVAILABLE FROM STOCK. Fibre Laser Cutting System “FLV-3015-C2 20kW / VF1530-12000W” Technical Specifications - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - X and Y axis repeatability: ±0.03 mm - Maximum speed: 120,000 mm/min - Maximum acceleration: 1.5 G - Power: 20 kW - Power consumption: 73 kW - Source brand: Raycus or “MAX Photonics” – selectable - Power supply: ~3×400 V, 50 Hz - Protection class: IP54 Cutting Thickness - Mild steel: recommended thickness – 35 mm, maximum thickness – 35 mm - Stainless steel: recommended thickness – 25 mm, maximum thickness – 25 mm - Aluminium: recommended thickness – 18 mm, maximum thickness – 18 mm - Brass: recommended thickness – 18 mm, maximum thickness – 18 mm Construction The machine offers exceptional stability thanks to its welded construction on sturdy legs. High head movement speed and precision are ensured by Japanese Fuji servo drives mounted on robust linear guides, helical racks, and pinions. The ABLS system automatically replenishes lubricant in the axis guides. RayTools Cutting Head with Autofocus Wireless Controller Laser head operation is managed via a wireless controller. Dkjdpfxjtixt Hj Ab Seg Safety The fibre laser cutting system is equipped with all the necessary safety features and accessories for the operator. An additional safety feature is the emergency lighting with acoustic signal, which is activated in hazardous situations to alert the operator and ensure safety. Free Drawing Package Every Otinus laser cutting system comes with an extensive CAD drawing package. The included designs are completely prepared and can be immediately cut in any format. During training, our technician will show you how to use them. The drawings are invaluable for anyone aiming to manufacture a wide range of decorative items. Technical Consultation We have specialists who can help select the appropriate machine and accessories prior to purchase—based on the technical drawings of your components. Machine Delivery Includes - 2-day training and machine installation - Day 1: up to 8 hours – commissioning and control system training - Day 2: up to 8 hours – independent machine operation under the supervision of our technician, including the ability to program specific parts - Technical consultation with our specialists - By phone: from 7:30 am to 9:00 pm (Mon-Sat) – 8-hour package to be used within 12 months - Online: from 7:30 am to 2:30 pm (Mon-Fri) – 8-hour package to be used within 12 months - Access to Otinus Academy online courses - LibreCad – access for 12 months Additionally, you receive: - CAD drawing package

Sąlyga: naujas, Gamybos metai: 2024, Many of our machines are available from stock. Call us to find out more! The offer applies to the basic version of the machine. All optional equipment and their prices can be found on our website. Fiber Laser Cutting System FLV-6025-CT2-6022 6kW Technical Specifications - Maximum sheet dimensions: 6050 x 2500 mm - Maximum profile height: 220 mm - Maximum profile length: 6000 mm - Positioning accuracy X and Y-axis: ±0.05 mm/m - Repeatable positioning accuracy X and Y-axis: ±0.03 mm - Maximum speed: 120,000 mm/min - Maximum acceleration: 1.5G - Maximum load capacity: 3840 kg - Power output: 6.0 kW - Power requirement: 40.0 kW - Source brand: Raycus or MAX Photonics selectable - Power supply: ~3x400 V 50 Hz - Protection class: IP54 - Length: 14,580 mm - Width: 4,300 mm - Height: 2,350 mm Dkedpfxsrum N Ie Ab Sjg - Weight: 16,800.0 kg Cutting Depth - Steel S235: recommended depth 25.0 mm, maximum depth 30.0 mm - Stainless steel: recommended depth 16.0 mm, maximum depth 20.0 mm - Aluminum: recommended depth 12.0 mm, maximum depth 14.0 mm - Brass: recommended depth 10.0 mm, maximum depth 12.0 mm Construction The machine is extremely stable thanks to its welded frame. High-speed, high-precision head movement is ensured by Japanese Fuji servo drives. Automatic lubrication system for the guideways. Ease of Use Loading heavy sheets is facilitated by transport balls integrated into the table surface, enabling smooth gliding during loading. Even picking up small finished parts is much easier thanks to drawers located beneath the machine, which can be conveniently pulled out using an ergonomic handle. RayTools cutting head with autofocus Voltage stabilizer (optional*) Control Panel The machine operates with a Windows 10 PC equipped with CypCut software for processing, featuring functionalities such as design, import and export of files, and workflow optimization. All installed software comes with lifetime licenses. The machine is equipped with a wireless controller. Professional Support We ensure continuous communication with our customers. Therefore, each machine purchase includes a package of professional support hours from Otinus technicians. Otinus Academy Learning Software With the purchase of this machine, you receive one-year access to online courses, allowing you to effortlessly train new staff members or refresh knowledge from previous trainings! Included with the machine: A 2-day training and machine installation - Day 1 up to 8 hours – commissioning and control training - Day 2 up to 8 hours – independent work on the machine under the supervision of our technician – possibility to program specific components Consultation with our specialists - By phone: from 7:30 to 21:00 (Mon-Sat) – an 8-hour package, usable within 12 months - Online: from 7:30 to 14:30 (Mon-Fri) – an 8-hour package, usable within 12 months Access to Otinus Academy online courses - LibreCAD – accessible for 12 months Additionally, you will receive: - CAD drawing package

Sąlyga: naujas, Gamybos metai: 2024, Many of our machines are available from stock. Call us to learn more! The offer refers to the basic version of the machine. All optional equipment and their prices can be found on our website. Fiber Laser Cutting System FLV-6025-CT2-6022 3kW Technical Specifications - Maximum sheet dimensions: 6050 x 2500 mm - Maximum profile height: 220 mm Djdpfx Absrum I Uj Sokg - Maximum profile length: 6000 mm - Positioning accuracy (X and Y axis): ±0.05 mm/m - Repeatable positioning accuracy (X and Y axis): ±0.03 mm - Maximum speed: 120,000 mm/min - Maximum acceleration: 1.5G - Maximum load capacity: 3840 kg - Power rating: 3.0 kW - Power consumption: 40.0 kW - Laser source brand: Raycus or MAX Photonics (selectable) - Power supply: ~3x400 V 50 Hz - Protection class: IP54 - Length: 14,580 mm - Width: 4,300 mm - Height: 2,350 mm - Weight: 16,800.0 kg Cutting Depth - Steel S235: recommended depth 25.0 mm, maximum depth 30.0 mm - Stainless steel: recommended depth 16.0 mm, maximum depth 20.0 mm - Aluminum: recommended depth 12.0 mm, maximum depth 14.0 mm - Brass: recommended depth 10.0 mm, maximum depth 12.0 mm Construction The machine is extremely stable due to its welded construction. High-speed and precise head movement is ensured by Japanese Fuji servo drives. Automatic lubrication system for linear guides. User Convenience Heavy sheet loading is made easier by transport balls integrated into the table surface, ensuring smooth loading. Retrieving small finished parts is also much simpler thanks to collection trolleys located beneath the machine that can be easily pulled out using a convenient handle. RayTools cutting head with autofocus Voltage stabilizer (optional*) Control panel The computer operates with Windows 10 and CypCut software for processing, featuring functions such as design, file import/export, and job optimization. All installed programs come with lifetime licenses. The machine is equipped with a wireless controller. Professional Support We ensure constant contact with our customers. That’s why we offer a support package of technician hours from Otinus specialists with every machine purchase. Otinus Academy Training Software When you purchase this machine, you receive one year’s access to online courses, making it easy to train new employees or refresh knowledge from previous training sessions! Machine Package Includes - 2-day training and machine installation: - Day 1 (up to 8 hours): Commissioning and control training - Day 2 (up to 8 hours): Independent operation under supervision of our technician – opportunity for programming specific parts. - Expert consultation: - By phone: 7:30–21:00 (Mon-Sat) – 8-hour package to be used within 12 months. - Online: 7:30–14:30 (Mon-Fri) – 8-hour package to be used within 12 months. - Access to Otinus Academy online courses - LibreCad – access valid for 12 months Additionally, you receive - CAD drawing package