Centrinės Tepimo Sistemos pirkti naudotą (9 236)

Sąlyga: geras (naudotas), 24 volt, fully operational Isdpfxjmdqyno Afwsa The stated sales price is subject to an additional 19% VAT, ex works.

Sąlyga: beveik kaip naujas (naudotas), Едностепенна центробежна volute ин-лайн помпа с едноглава конструкция: -Износващи се пръстени от бронз -Катaфорезно покритие -Стабилна втулкова муфа -Top-pull-out принцип за лесна поддръжка -Оптимизирана хидравлика -In-line дизайн с противоположни смукателен и нагнетателен отвор за монтаж в тръбопровод или върху бетонова основа -Корозионноустойчива, безподдръжкова механична уплътнителна втулка Обороти на помпата (основа на данните): 2910 rpm Дебит: 94.5 m³/h Напор: 20.3 m Iedpfxsxx T Eus Afwja Максимален напор: 240 дм Действителен диаметър на работното колело: 137 мм Основно уплътнение на вала: BQQE Код за уплътнение на вала: BQQE Толеранс на кривата: ISO9906:2012 3B2 Изпълнение на помпата: A Материали Корпус на помпата: сив чугун EN-GJL-250 ASTM клас 35 Работно колело: сив чугун EN-GJL-200 ASTM клас 30 Код на материалите: A Монтаж Температурен диапазон на околната среда: -30 .. 60 °C Максимално работно налягане: 16 bar Максимално налягане при зададена температура: 16 bar / 120 °C Стандарт за тръбно присъединяване: EN 1092-2 Вид присъединение: DIN Размер на присъединението: DN 100 Номинално налягане: PN 16 Дължина между фланците: 500 мм Размер на моторен фланец: FF265 Код на присъединение: F Течност Качвана течност: Вода Диапазон на температурата на течността: -25 .. 120 °C Избрана работна температура: 20 °C Плътност: 998.2 кг/м³ Електрически данни Тип мотор: 132SB Номинална мощност P2: 7.5 kW Честота: 50 Hz Номинално напрежение: 3 x 380-420D/660-725Y V Номинален ток: 14,4-13,6/8,30- A Стартов ток: 760 % Cos φ – мощностен фактор: 0.9 Номинални обороти: 2900 rpm Енергийна ефективност IE2: 88,4 % Клас на ефективност: IE2 Ефективност на мотора при пълно натоварване: 88.4 % Ефективност на мотора при 3/4 натоварване: 89.6 % Ефективност на мотора при 1/2 натоварване: 88.8 % Брой полюси: 2 Клас на защита (IEC 34-5): 55 (защитено срещу водни струи/прах) Клас на изолация (IEC 85): F Вградена моторна защита: PTC Номер на мотора: M3N15222 Управление Честотен преобразувател: няма Други: Минимален индекс на ефективност MEI ≥ 0.58 Нетно тегло: 133 kg Брутно тегло: 160 kg Обем за транспортиране: 0.4 m³

Sąlyga: naujas, Gamybos metai: 2025, A radial turbine is installed in a vacuum cabin on the clean air side in special soundproof cabins. The next-generation reinforced turbine and the large filtration area operate more efficiently and effectively, contributing to energy savings. Advantages: - The DCV 7500 extraction unit represents another milestone in the production of high-performance sawdust and dust extraction units, designed to maintain consistent extraction parameters throughout the work cycle. - Durable, robust construction ensures quiet and vibration-free absorber operation. - Proven reliability, confirmed by manufacturing plants handling large orders on a daily basis. - Compact footprint, yet capable of extracting large quantities of dust and chips. - Large-diameter (280 mm) metal suction nozzle provides excellent airflow. - Powerful and quiet fan guarantees high negative pressure performance. - Special blade design makes the unit more efficient and effective, additionally supporting energy savings. - Very high airtightness of the entire suction system guarantees the best air quality within the facility and eliminates heat loss during the heating season. - Large filter surface area. - Possibility to build an overhead system and connect several machines operating simultaneously with the DCV 7500E extraction units. - Quick replacement of waste collection plastic bags, designed to maintain 99.99% hermeticity of the system. - Low-noise, high-performance thanks to a balanced metal impeller. - Ensures perfection and cleanliness at the workstation, which directly translates to the quality of your products. - Perfectly compatible with machines such as grinders, edge banders, panel saws, etc. - Guaranteed high-quality filtration! - Polyester filter retains dust particles down to 5 microns; to filter even smaller particles, use a HEPA-type filter. - Not intended for use in explosive atmospheres. - Designed for dust, chips, and sawdust extraction in woodworking industry (not suitable for wet material, e.g. wet sawdust). Technical Specifications: CONTINUOUS DUTY MOTOR POWER S1: 5.5 kW / 400 V, 50 Hz SPEED: 2900 rpm EXTRACTION CAPACITY: 7,500 m³/h SUCTION NOZZLE DIAMETER: 280 mm Iedjvzqtxjpfx Afwja SUCTION VELOCITY: 28–32 m/s FILTER AREA: 18 m² FILTER MATERIAL: Polyester, 5 microns NUMBER OF FILTERS: 35 DIMENSIONS (L x W x H): 1040 × 625 × 2150 mm WEIGHT: 306 kg Manufacturer: Cormak

Sąlyga: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Gumos tirpalo maišymo įrenginys su kompaktišku maišytuvu ir inline maišytuvu, skirtas skystiems kaučiuko-tolueno mišiniams ir kitiems skysčiams ATEX sertifikuota Prietaisas Ex II 1/2G c IIB T3 Inline maišytuvas su termo-sifono sistema Tipas 450LS Silverson Maišymo galia (vanduo): 25 000 l/val. Ijdpfx Afexz D Ryswsa Variklio apsisukimų dažnis: 3000 aps./min Kompaktiškas maišytuvas Tipas ARW-2081 (EX) Variklio apsisukimų dažnis: 129 aps./min Maišytuvo veleno skersmuo: 30 mm Išmatavimai ir svoris Išmatavimai (I x P x A): 1800 x 1000 x 1710 mm Svoris: apie 1320 kg

Sąlyga: naujas, Condition: new Delivery time: approx. 4 months from order placement Country of origin: Bulgaria Price: €36,070 Leasing rate: €688.94 Swing over bed: 400 mm Distance between centers: 1,000 mm Isdoxzuu Ajpfx Afwoa Center height: 200 mm Spindle bore: 52 mm Swing over cross slide: 235 mm Bed width: 320 mm Spindle mount / DIN 55027: Size 6 Spindle taper: 6 M Number of spindle speeds: 12 Spindle speed range: 50–2,240 rpm Number of feeds: 80 Longitudinal feed: 0.015–0.6 mm/rev Cross feed: 0.0075–0.3 mm/rev Number of threads: 40 Metric thread range: 0.25–7.5 mm Inch thread range: 120–4 TPI Module thread range: 0.0625–1.875 DP thread range: 480–16 Cross slide travel: 235 mm Top slide travel: 110 mm Tailstock quill diameter: 50 mm Tailstock taper: MT 4 Tailstock quill travel: 100 mm Motor power: 4 kW Length: 2,750 mm Width: 1,100 mm Height: 1,600 mm Weight: 1,540 kg Drive via gear transmission 3-axis digital readout Fagor 40i Quick-change toolpost Multisuisse incl. 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3204/DIN 6350, Ø 200 mm Spindle nose No. 6 to DIN 55027 Rapid traverse (4) Fixed center Coolant system 1 flange plate for 200 mm chuck 1 adapter bush Rear chip splash guard over the full length Leadscrew and feed rod guard Chuck guard Toolholder guard Leveling bolts and plates Tailstock with quick clamp Low-voltage machine lamp Operator’s manual Equipment according to "CE" ADDITIONAL TURNING LENGTHS: Turning length 750 mm: €35,360.00

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Carton Flow Storage Rack Professional roller system: Schafer Set includes 4 roller shelves, each measuring 230 x 250 cm One shelf has 13 pcs wheel profiles and 4 pcs separating profiles. Configurable for various carton widths. Set is disassembled and ready for transporting. Set might be sold in separate parts. Overall line of 32 sets available. Iedpfx Afsxpuz Eowsa Condition - used, in good technical condition.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2013, veikimo valandos: 2 100 h, sukimosi skersmuo virš skersinio stumduko: 200 mm, veleno skylė: 66 mm, tekinimo skersmuo virš slankiojančio stalo: 435 mm, centro aukštis: 217 mm, tekėjimo ilgis: 1 000 mm, bendras ilgis: 3 061 mm, veleno greitis (maks.): 3 500 aps./min, veleno greitis (min.): 1 aps./min, lovos plotis: 202 mm, For sale: WEILER E40 precision lathe – only 2,100 hours on the clock, machine condition like new. Offers 435 mm swing over bed, 200 mm swing over cross slide, 66 mm spindle bore, and 1,000 mm turning length. Ideal for workshops requiring accuracy and durability. Contact us for pricing and further details! Ijdpev A Irzefx Afwea

Sąlyga: naujas, Table height: 800 mm Dimensions (LxWxH): 1950 x 950 x 800 mm Table width: 950 mm Table length: 1950 mm Approx. weight: 288 kg Special workbench systems from the SST, SFT, and SWT fix series serve as 3D clamping stations for the efficient production of assembly, welding, and bonding structures, such as fixtures, railings, frames, etc. With the help of the extensive range of clamping accessories (see catalogue section Welding Table Accessories), these table systems can also be used as flexible retoolable fixtures, enabling high-quality production of small and medium series. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop equipped with a Ø28 mm hole grid. Additionally, the tabletop has a 100 x 100 mm grid marking for easy alignment of workpieces and fixtures. The hole grid allows for the use of a wide variety of clamping elements and positioning aids. For specific applications, the standard tabletop can also be optionally equipped with stainless steel 1.4301, aluminium, plastic, or high-strength ST70 materials. Thanks to the fully bolted construction of the clamping plate, the work surface can be cost-effectively replaced if worn. This makes the table system particularly sustainable for long-term use. Iedpegrvwfsfx Afwoa Price must be reconfirmed with the manufacturer prior to ordering!! For accessories and further information, please follow this link:

Sąlyga: naudotas, Gamybos metai: 2022, Condition: used Year of manufacture: 2022 Stock number: 1672 Delivery time: immediate, subject to prior sale Country of origin: Bulgaria Price: €27,700 Bestseller: 1 In stock: 1 Special price: €23,600 Swing diameter over bed: 400 mm Distance between centers: 1,000 mm Center height: 200 mm Spindle bore: 52 mm Swing diameter over cross slide: 235 mm Bed width: 320 mm Spindle mount / DIN55027: 6 Spindle taper: 6 M Number of speed ranges: 12 Spindle speed: 50–2,240 rpm Number of feeds: 80 Longitudinal feed: 0.015 – 0.6 mm/rev Cross feed: 0.0075 – 0.3 mm/rev Number of threads: 40 Metric thread range: 0.25 – 7.5 mm Inch thread range: 120 – 4 TPI Module thread range: 0.0625 – 1.875 DP thread range: 480 – 16 Cross slide travel: 235 mm Top slide travel: 110 mm Tailstock quill diameter: 50 mm Tailstock taper: 4 MT Tailstock quill travel: 100 mm Motor power: 4 kW Length: 2,750 mm Width: 1,100 mm Height: 1,600 mm Weight: 1,540 kg Demo machine / as-new condition (Original price €36,070.00) Drive via gear transmission 3-axis digital readout Fagor 40i Multisuisse quick-change toolholder incl. 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm Spindle nose No. 6 as per DIN 55027 Rapid traverse (4) Fixed centre Coolant system 1 flange plate for lathe chuck Ø 200 mm 1 adapter sleeve Rear chip splash guard over the entire length Lead screw and feed rod cover Chuck guard Toolholder guard Leveling screws and plates Tailstock with quick clamping Isdpfx Afowirxdowea Low-voltage machine lamp Operating manual Equipment per “CE” ADDITIONAL TURNING LENGTHS: Turning length 750 mm €35,360.00

Sąlyga: naujas, Table height: 650 - 1050 mm Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm Table width: 1230 mm Table length: 2480 mm Weight approx.: 733 kg Ijdsfk Aifepfx Afwea This allows the user to flexibly adjust the working surface height according to requirements, enhancing productivity and ergonomics. Height adjustment is standardly achieved via a manual hydraulic system within a range of 650 to 1050 mm (other heights available on request). Like the SST fix series, the worktop features a 100 x 100 mm grid of Ø 28 mm holes. When used in combination with processing machines, test or post-processing fixtures (deburring, marking, checking) can be adjusted to match the clamping table height of the respective machine. The table systems can be easily relocated on site using a pallet truck. These mobile systems, with their various fastening and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced directly after removal from the machine and transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the work surface can be cost-effectively replaced if worn in the future. Price must be confirmed with the manufacturer before ordering! For accessories and further information, please follow this link:

Sąlyga: naudotas, Gamybos metai: 2020, Condition: used Year of manufacture: 2020 Stock number: 1658 Delivery time: prompt, subject to prior sale Country of origin: Bulgaria Price: €26,500 In stock: 1 Special price: €22,600 Swing over bed: 400 mm Distance between centers: 1000 mm Center height: 200 mm Spindle bore: 52 mm Swing over cross slide: 235 mm Bed width: 320 mm Spindle mount / DIN 55027: size 6 Spindle taper: 6 M Number of spindle speed ranges: 12 Spindle speed: 50–2,240 rpm Number of feeds: 80 Longitudinal feed: 0.015–0.6 mm/rev Cross feed: 0.0075–0.3 mm/rev Number of threads: 40 Metric thread range: 0.25–7.5 mm Inch thread range: 120–4 TPI Module thread range: 0.0625–1.875 Cross slide travel: 235 mm Top slide travel: 110 mm Tailstock quill diameter: 50 mm Tailstock taper: MT 4 Tailstock quill travel: 100 mm Motor power: 4 kW Length: 2750 mm Width: 1100 mm Height: 1600 mm Weight: 1540 kg This machine is currently used in our workshop for repair work, and has therefore seen very little use (original price: €36,070.00). Isdpfx Aswirdtjfwea Drive via gearbox 3-axis digital readout Fagor 40i Quick-change tool post Multifix type B incl. 4 holders (3 rectangular, 1 round) Three-jaw chuck Bison 3204/DIN6350, Ø 200 mm Spindle nose No. 6 according to DIN 55027 Rapid traverse (4) Fixed centre Coolant system 1 flanged plate for turning chuck, Ø 200 mm 1 adaptor sleeve Full-length rear chip guard Leadscrew and feed shaft cover Chuck guard Tool post guard Leveling bolts and plates Tailstock with quick-clamping Low-voltage machine lamp Operating manual and machine labels in GERMAN CE-compliant equipment

Sąlyga: naujas, Table height: 800 mm Dimensions (LxWxH): 2980 x 1480 x 800 mm Iedpofk Aigjfx Afwoa Table width: 1480 mm Table length: 2980 mm Approx. weight: 850 kg Special work table systems of the SST, SFT, and SWT fix series are designed as 3D clamping workstations for efficient assembly, welding, and bonding of various constructions, such as fixtures, railings, frames, etc. With the aid of a comprehensive range of clamping accessories (see the welding table accessories catalog section), these table systems can also be used as flexibly reconfigurable fixtures and thus enable high-quality production of small and medium batches. The special work tables feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, which is equipped with a Ø28 mm hole grid. Additionally, the tabletop features a 100 x 100 mm grid marking for easy alignment of workpieces and fixtures. The table perforation allows for the use of a wide variety of clamping and positioning aids. For special applications, the surface of the table top can optionally be supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials like ST70, deviating from the standard. Due to the fully bolted construction of the clamping plate, the working surface can be easily and cost-effectively replaced in case of wear, ensuring the table system remains particularly sustainable. Price must be confirmed by the manufacturer prior to ordering! For accessories and further information, please follow this link:

Sąlyga: naujas, Table height: 800 mm Dimensions (LxWxH): 2480 x 1230 x 800 mm Table width: 1230 mm Table length: 2480 mm Weight approx.: 650 kg Iodpfx Ajfk Aihofwoa Special Workbench Systems of the SST, SFT, and SWT fix Series are designed as 3D clamping workstations for efficient assembly, welding, and bonding construction processes, such as fixtures, railings, frames, etc. With the extensive range of clamping accessories (see catalogue section: Welding Table Accessories), these table systems can also be used as flexibly configurable fixtures, enabling high-quality production of small and medium-sized batches. The special work tables feature either a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, equipped with a Ø28 mm hole pattern. Additionally, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The hole grid allows the use of a wide range of clamping elements and positioning aids. For special applications, the tabletop surface can be optionally supplied in stainless steel 1.4301, aluminium, plastic, or high-strength materials such as ST70, deviating from the standard. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively if worn in the future. This ensures the table system remains particularly sustainable for long-term use. Price must be requested from the manufacturer before placing an order! For accessories and further information, please follow this link:

Sąlyga: naujas, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Isdpfxjfk Aivo Afwsa Table length: 1950 mm Weight approx.: 365 kg This enables the user to flexibly adjust the working surface height to individual requirements, improving both efficiency and ergonomics. Height adjustment is provided as standard by a manual hydraulic system within a range of 650 – 1050 mm (other ranges available upon request). The work surface is equipped—just like the SST fix series—with a 100 x 100 mm, Ø 28 mm hole grid. When used in combination with machining equipment, inspection or post-processing devices (deburring, marking, checking) can be adjusted to match the clamping table height of the machine. The table systems are easily relocated using a pallet truck. These mobile systems, with their various mounting and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. After removal from the machine, tools can be safely maintained on site and, if necessary, sent for repair. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in the event of wear. The table below (Table 2) provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!

Sąlyga: naujas, Table height: 800 mm Dimensions (LxWxH): 1950 x 950 x 800 Table width: 950 mm Table length: 1950 mm Ijdofk Ai Dopfx Afwsa Approx. weight: 355 kg Special workbench systems from the SST, SFT, and SWT fix series serve as 3D clamping workstations for efficient production of assembly, welding, and bonding constructions, such as fixtures, railings, frames, etc. With the extensive range of clamping accessories (see welding table accessories catalog section), these table systems can also be used as flexibly configurable fixtures, enabling high-quality production of small and medium batches. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, equipped with a Ø28 mm hole grid. Additionally, the tabletop includes a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The perforated table allows for the use of a wide variety of clamping and positioning elements. For special applications, the table surface can optionally be supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70, deviating from the standard. Thanks to the fully bolted construction of the clamping plate, the work surface can be economically replaced in case of wear, which makes the table system particularly sustainable. Price must be requested from the manufacturer before ordering!! For accessories and further information, please follow this link:

Sąlyga: naujas, Gamybos metai: 2024, Hole diameter: 20 mm Dimensions (LxWxH): 2480 x 1200 x 930-1003 mm Table width: 1200 mm Table length: 2250 mm Working height: 930 - 1003 mm Plate thickness: 12 mm Product specifications for welding tables: - Plate size: 2480 mm x 1200 mm - Surrounding reinforcement edge, 140 mm high, with a double-row hole grid. - Grid spacing: 100 mm x 100 mm center-to-center. - Equipped with necessary reinforcement ribs along width and length. - Table material: S355, pickled and oiled. - Legs feature ball joints and are height-adjustable. - The welding table is oiled and pickled, resulting in a smoother working surface and increased resistance to weld splatter. Isdpfx Afoukkrvowja Additional options: - Engraved lines: €85 - Hole diameter 16 mm: €80 - Hole diameter 28 mm: €80 - Diagonal hole pattern 50x50 mm: €250 - 4 adjustable wheels: €360 The welding tables with legs and rollers are height adjustable. Working height from 92 to 93 cm. The feet can be adjusted up to 10 cm higher. A welding table with adjustable wheels has a minimum working height of 87 cm. You can set the wheels to a maximum working height of 100 cm.

Sąlyga: naujas, Gamybos metai: 2024, Diameter of holes: 20 mm Dimensions (LxWxH): 1000 x 1000 Working height: 93-103 cm Iedpfx Afeukkr Aewja Product specifications – Welding Tables - Plate size is 1000 mm x 1000 mm - Perimeter reinforcement edge 140 mm high, equipped with a double-row hole grid. - Hole grid spacing is 100 mm x 100 mm (center to center). - Fitted with necessary reinforcement ribs across width and length. - Table material: S355 steel, pickled and oiled. - Legs are equipped with ball joints and height adjustable. - The welding table is oiled and pickled, ensuring a smoother working surface and making the table less susceptible to weld spatter. - Plate thickness: 12 mm Additional options: Engraved lines:                             80€ Hole diameter 16 mm:              100€ Hole diameter 28 mm:              100€ Diagonal hole pattern 50x50:      100€ 4 adjustable castors:                   360€

Sąlyga: naujas, Gamybos metai: 2024, Diameter of holes: 20 mm Dimensions (LxWxH): 2250 x 1000 x 1000 mm Table width: 1000 mm Table length: 2250 mm Ijdpfx Aoukkr Njfwsa Working height: 93–103 cm Plate thickness: 12 mm Medium-sized welding table Product Specifications – Welding Tables: - Plate size: 2250 mm x 1000 mm - Continuous reinforcement edge, 140 mm high, equipped with a double-row hole grid. - Hole grid spacing: 100 mm x 100 mm (center-to-center). - Equipped with the necessary reinforcing ribs both in width and length. - Table material: S355, pickled and oiled. - Feet are fitted with ball joints and are height adjustable. - The welding table is oiled and pickled; this results in a smoother working surface and the table is less susceptible to weld spatter. Additional options: Engraved lines: €75 Hole diameter 16 mm: €80 Hole diameter 28 mm: €80 Diagonal hole grid 50x50: €150 4 adjustable castors: €360

Sąlyga: naujas, Table height: 800 mm Dimensions (LxWxH): 1450 x 950 x 800 mm Table width: 950 mm Table length: 1450 mm Ijdpfx Afofkzcvjwsa Approx. weight: 288 kg Special worktable systems of the SST, SFT, and SWT fix series as 3D clamping workstations for the efficient production of assembly, welding, and bonding constructions, such as jigs, railings, frames, etc. With the help of the extensive range of clamping accessories (see catalogue section welding table accessories), these table systems can also be used as flexibly configurable fixtures and thus enable high-quality production of small and medium-sized series. The special worktables are equipped with a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, which is fitted with a Ø28 mm hole grid. Additionally, the tabletop features a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The hole grid allows the use of a variety of clamping elements and positioning aids. For special applications, the tabletop surface can, as an option and deviating from the standard, be supplied in stainless steel 1.4301, aluminium, plastic, or even high-strength materials such as ST70. Due to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in case of wear, making the table system particularly sustainable in use. Price must be requested from the manufacturer prior to ordering!! For accessories and further information, please follow this link:

Sąlyga: naujas, Table height: 650 - 1050 mm Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm Table width: 1230 mm Table length: 2480 mm Approximate weight: 555 kg Isdpsfk Aicjfx Afwsa This allows the user to flexibly adjust the working surface height to meet specific requirements in order to improve both efficiency and ergonomics. Height adjustment is performed as standard via a manual hydraulic system in a range from 650 – 1050 mm (other heights available upon request). The worktop, like the SST Fix series, features a 100 x 100 mm, Ø 28 mm hole grid. When combined with processing machines, inspection or finishing devices (deburring, marking, inspection) can be aligned to the clamping table height of the machine. The table systems are easily relocated onsite using a pallet truck. These mobile systems, with various mounting and securing options, have proven ideal for the maintenance of injection moulding and die casting tools. Immediately after removal from the machine, tools can be safely serviced on site and transferred to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the work surface can later be replaced cost-effectively in case of wear. Price must be reconfirmed with the manufacturer before ordering!

Sąlyga: naujas, Table height: 800 mm Dimensions (LxWxH): 1980 x 1480 x 800 mm Table width: 1480 mm Iedsfk Aimspfx Afwea Table length: 1980 mm Approx. weight: 481 kg Special workbench systems of the SST, SFT, and SWT fixed series are designed as 3D clamping workstations for efficient production of assembly, welding, and adhesive constructions, such as jigs, railings, frames, etc. With the assistance of the extensive clamping accessory range (see catalogue section: welding table accessories), these table systems can also be used as flexibly reconfigurable fixtures, enabling high-quality production of small and medium series. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, which is equipped with a Ø28 mm hole grid. In addition, the tabletop has a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The table perforation allows the use of a wide variety of clamping elements and positioning aids. For special applications, the tabletop surface can optionally be supplied in stainless steel 1.4301, aluminium, plastic, or high-strength materials such as ST70, deviating from the standard. Thanks to the fully bolted design of the clamping plate, the work surface can be replaced affordably in case of later wear. This ensures the table system remains highly sustainable in use. Price must be confirmed with the manufacturer prior to ordering! For accessories and further information, please follow this link:

Sąlyga: naujas, Table height: 650 – 1050 mm Dimensions (L x W x H): 2980 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 2980 mm Weight approx.: 945 kg This allows the user to flexibly adjust the working surface height to the specific requirement, improving both efficiency and ergonomics. Height adjustment is standardly performed via manual hydraulics, adjustable within a range of 650 – 1050 mm (other heights available on request). The worktop, like the SST fix series, features a 100 x 100 mm Ø 28 mm hole grid. Iedpfsfk Ainex Afwoa When used in combination with processing machines, inspection or post-processing fixtures (deburring, marking, testing) can be adapted to the height of the machine’s clamping table. The table systems can be easily relocated using a pallet truck. These mobile systems have proven ideal for the maintenance of injection moulding and die-casting tools, thanks to various mounting and securing options. After removal from the machine, tools can be safely serviced locally and taken to maintenance for repairs. Due to the fully bolted construction of the clamping plate, the working surface can be economically replaced in the event of wear. Price must be confirmed with the manufacturer before ordering!! For accessories and further information, please follow this link:

Sąlyga: naujas, Table height: 800 mm Dimensions (LxWxH): 1980 x 1480 x 800 mm Table width: 1480 mm Table length: 1980 mm Weight approx.: 630 kg Ijdpfx Afjfk Aipswea This allows the user to flexibly adjust the working surface height to the specific requirements, improving both efficiency and ergonomics. The height adjustment is standard with a manual hydraulic system within a range of 800 mm (other heights available on request). Like the SST fix series, the worktop features a 100 x 100 mm grid with Ø 28 mm holes. When used in combination with processing machines, inspection or post-processing fixtures (deburring, marking, testing) can be adapted to the clamping table height of the machine. The table systems can be easily relocated with a pallet truck. These mobile systems, featuring various fastening and safety options, have proven ideal for the maintenance of injection moulding and die-casting tools. Immediately after removal from the machine, tools can be safely serviced on-site and transported for repairs to maintenance. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively in case of wear. The following Table 2 provides an overview of the available standard models. Price must be confirmed with the manufacturer prior to ordering!! For accessories and further information, please follow this link:

Sąlyga: naujas, Table height: 650 - 1050 mm Iedpfx Ajfk Ai Aefwsa Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Approx. weight: 358 kg This enables the user to flexibly adjust the working surface height according to specific requirements, thereby improving efficiency and ergonomics. Standard height adjustment is performed via manual hydraulics within a range of 650 – 1050 mm (other ranges available on request). The worktop is also equipped, like the SST fix series, with a 100 x 100 mm Ø 28 hole grid. When used in combination with processing machines, inspection or post-processing fixtures (deburring, marking, inspection) can be adapted to the clamping table height of the machine. The table systems are easy to move locally by means of a pallet truck. These mobile systems, with various mounting and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Immediately after removal from the machine, tools can be serviced safely on site and transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of later wear. The table below provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!

Sąlyga: naujas, Table height: 800 mm Dimensions (LxWxH): 1950 x 950 x 800 mm Table width: 950 mm Table length: 1950 mm Approx. weight: 375 kg Iedpfxsfk Ai Ej Afwsa Special worktable systems from the SST, SFT, and SWT fix series serve as 3D clamping workstations for efficient assembly, welding, and bonding of constructions, such as fixtures, railings, frames, etc. Thanks to the comprehensive range of clamping accessories (see weld table accessories in catalog), these table systems can also be used as flexible, reconfigurable fixtures, enabling high-quality production of small and medium batch sizes. The special worktables feature a 16 mm (dual Standard) or 25 mm (triple 24+1) thick worktop, equipped with a Ø28 mm hole grid. Additionally, the tabletop features a 100 x 100 mm grid marking for easy alignment of workpieces and fixtures. The grid drilling allows for the use of a variety of clamping elements and positioning aids. For special applications, the tabletop surface can, in deviation from standard, be fitted with stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70. Thanks to the fully bolted construction of the clamping surface, the working surface can be replaced cost-effectively if worn, making the table system particularly sustainable. Price must be requested from the manufacturer prior to ordering!! For accessories and further information, please follow this link: