Centrinis tepimas

Lincoln Quicklub 645-41110-1

Būklė: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW Nlodjrigxyepfx Acpja - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Būklė: naujas, *TECHNICAL SPECIFICATION:* Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water / glycol mixture Njdsg Ezarepfx Acpjla Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS:* - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: The system automatically warns and then shuts down in case of incorrect water/glycol mixture) - Pressure-controlled cooling water regulator (INFO: Significantly more precise than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free option available) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS:* - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test specimen draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further custom options possible upon request and technical review Visit our website for more details or other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requests differing from the standard are listed in the quotation or order confirmation.*

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: M-900iA/260L R-30iA, keliamoji galia: 260 kg, rankos pasiekiamumas: 3 100 mm, valdiklių gamintojas: Fanuc, valdiklio modelis: R-30iA, teach pendant gamintojas: Fanuc, Įranga: dokumentacija / vadovas, IRS Robotics® atnaujintas pramoninis robotas. 100% komplektacija ir visiškai veikiantis: roboto ranka, valdiklis, visi kabeliai ir mokymo pultas. Į komplektą įeina mūsų garantija ir išsamus 77 punktų protokolo įvertinimas, atliktas mūsų vidinių robotikos inžinierių. Gamintojas: FANUC Tipas: M-900iA/260L Njdpfx Aep T Umqocpela Valdiklis: R-30iA Naudingoji apkrova: 260 kg Pasiekiamumas: 3,1 m Paskirtis: didesnė apkrova, ilga ranka Roboto svoris: 1800 kg Pristatymo laikas: pagal susitarimą IRS Robotics® atnaujinimas: 77 punktų protokolas – pilnai patikrintas mūsų bandymo stenduose, nauji tepalai/alyvos, nauji akumuliatoriai, pilnai išvalytas, nudažytas pageidaujama RAL spalva. Įtraukta tikslumo būklės matavimai (pakartojamumas, tikslumas, laisvumas) Apie mus: Kasdien teikiame patikimus atnaujintus garsių gamintojų robotus: ABB – KUKA – FANUC – YASKAWA. Įkurta 2002. Pristatome visame pasaulyje!

Būklė: naujas, *Technical Standard Specification: Heating capacity: 9 kW Nsdpeftm Hrsfx Acpola Cooling capacity: 50 kW Medium: Water up to 160°C Maximum external volume: 16 l at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTED FEATURES: • Smart Controller Plus 7" touchscreen / Industry 4.0 compatible • Flow measurement, adjustable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-sub connector 20mA/TTY • Connection for external temperature sensor PT 100 for measuring and displaying tool temperature • Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers • High-performance pump, hydraulic parts in stainless steel (VA), magnetically coupled • Tool emptying via suction • Booster pump for unit filling at high temperatures • Filling via cooling water switchable to separate filling • SSR for heating control • IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European directives. Other directives and standards are only met if listed in the order confirmation. This technical specification reflects the standard equipment. Customer requirements deviating from the standard will be specified in quotations or order confirmations.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Loher reciprocating motor 90 kW - 1500 rpm. B3 mounting. Shaft diameter 80 mm. Nedjuy S Tzspfx Acpela

Gamybos metai: 2023, veikimo valandos: 11 h, būklė: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: MA0144_1922, Exhibition unit: Kaeser SX 8 Screw Compressor (10 bar) with SIGMA Control 2 Year of manufacture: 2023 Operating hours: 1 h Technical data: Free air delivery at 7.5 bar: 670 l/min Motor power: 5.5 kW Nodpeh Ey Rcsfx Acpsla Electrical connection: 400 V / 3 phase / 50 Hz Dimensions (W x D x H): 590 x 632 x 970 mm Weight: 155 kg Compressed air connection: G 3/4" Sound pressure level: 64 dB(A) Visit our showroom in Erlangen. On more than 450 sqm of exhibition space, you will find a wide selection of used and new compressors.

Būklė: paruoštas naudoti (naudotas), DANOBAT RTM 2500 – CNC Surface Grinding Machine | 2,500 mm travel | 3,100 kg table load capacity High-capacity surface grinding machine for large-format and precision workpieces. Robust, reliable, and engineered for demanding operations. 🛠 Key technical specifications: Nodehq Ui Iepfx Acpela • Maximum grinding length: 2,500 mm • Maximum grinding width: 900 mm • Maximum grinding height: 1,000 mm • Table work surface: 2,500 x 800 mm • Maximum table load: 3,100 kg • Electromagnetic chuck: 2,000 x 550 mm • Table speed (X): 1 – 30 m/min • X-axis travel: 2,650 mm • Cross travel (Z): 800 mm • Vertical travel (Y): 1,150 mm • Z-axis rapid feed: up to 8,000 mm/min • Y-axis rapid feed: up to 1,000 mm/min • Programmable increments: 0.001 mm • Encoder measurement on Z and Y axes ⚙️ Grinding unit (Head): • Grinding wheel diameter: 500 mm • Wheel bore: 203.2 mm • Max. wheel width with recess: 100 mm • Peripheral speed: 26 m/s • Rated speed: 1,000 rpm • Grinding wheel motor power: 15 kW • Total installed power: 30 kW ✅ Additional features: • Turcite-coated prismatic guideways on all axes • Angular grinding head • Paper band filtration unit • 4 kW hydraulic unit 📌 Industrial-grade grinding machine ready for large-scale challenges. Ideal for workshops requiring high-capacity, precision flat grinding down to the micron range.

Būklė: naudotas, rida: 71 000 km, galia: 445 kW (605,03 AG), pirmoji registracija: 07/2012, kuro tipas: dyzelinas, bendras svoris: 50 000 kg, pavaros tipas: pusiau automatinis, emisijos klasė: Euro 5, Įranga: suodžių filtras,

Būklė: naujas, mašinos/transporto priemonės numeris: 1900040028, konvejerio juostos ilgis: 1 700 mm, konvejerio juostos plotis: 440 mm, konvejerio juostos greitis: 57 mm/s, galia: 0,18 kW (0,24 AG), įėjimo įtampa: 230 V, įėjimo dažnis: 50 Hz, Voran transport conveyor 1,700 x 440 mm Nodpfstv E Diex Acpjla FDA compliant

Būklė: naujas, Gamybos metai: 2021, For sale is a new Nicholson A6/35" 5-arm machine with roller drive. The machine is still in its original packaging. Assembly and commissioning can be carried out by us. Nledpfx Acswt T Unepoa