Saugos Lange pirkti naudotą (4 408)

Būklė: geras (naudotas), Gamybos metai: 2019, Briaunos storis 0,4-3 mm / 5 mm Sujungimo agregatas Gedpfx Ajy El Eisqljuc Klijų vonelė Spaudimo įtaisas Pjovimo stotis Frezavimo stotis Traukimo ašmenys Paviršiaus traukimo ašmenys Ruoinio storis 8-50 mm Minimalus ruoinio plotis 75 mm Minimalus ruoinio ilgis 120 mm Bendras ilgis apie 2940 mm + magazino padėklo iškyša Tiksli komplektacija pagal užklausą Duomenys paimti iš techninės duomenų lentelės, todėl be garantijos.

Būklė: naudotas, Gamybos metai: 2016, Naudotas įrenginys Pagaminimo metai: 2016 Būklė: Šiuo metu vis dar eksploatuojamas Įranga ir techniniai duomenys: Klijų vonelė Prispaudimo zona Kirtimo pjūklas Kombinuotas frezavimas r=2 mm, lygus frezavimas Ruošinio storis 8 - 50 mm Ruošinio plotis min. apie 75 mm Ruošinio ilgis min. apie 120 mm Briaunos storis 0,4 - 3,0/5,0 mm Briaunos aukštis maks. = ruošinio aukštis + 4 mm (2+2) Elektros prijungimas 400V, 50 Hz, 3 fazės Bendras galingumas 3,2 kW Pasiuntimo greitis 8,0 m/min. Pneumatinė prijungtis 6 bar Grynas svoris 550 kg Mašiną galima papildomai aprūpinti: Guodsynpc Njpfx Aqloc Spindulio grandymo peiliu Plokštumos grandymo peiliu Poliravimo agregatu Vieta: NRW Galima nuo: apie 2025 m. gruodžio mėn.

Gamybos metai: 1960, būklė: naudotas, Fan, blower, exhaust fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, suction fan, high-performance axial fan, duct fan -Manufacturer: Lange & Breithaupt, Troca multi-blower type A 500 -Power: 3.4 kW / 1400 rpm -Volume flow: 41 m³/sec -Bolt circle: Ø 555 x 10 mm -Dimensions: Ø 595 x 550 mm Gedpfx Aounn I Aeqljuc -Weight: 90 kg

Būklė: geras (naudotas), Gamybos metai: 1956, Slotting machine, shaper, high-speed planer, keyway cutting machine, slotting machine, keyway slotting machine, keyway slotting tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, high-speed power planer - Manufacturer: Lange & Geilen, Horizontal Slotting Machine High-Speed Power Planer - Stroke: 350 mm - Strokes per minute: 20 - 110 min⁻¹ - Clamping table: 380 x 280 mm - Travel: X 410 mm Z 320 mm - T-slot: 14 mm - Drive: AEG 3 kW - Dimensions: 1460/1170/H1350 mm Gsdpjlzmxyofx Aqlouc - Weight: 1140 kg

Būklė: naujas, Gamybos metai: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with discharge function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece feed, and integrated distance control for contactless management of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer tape, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. - 3 free slots for finishing units - 10" color touchscreen Machine length: 4030 mm Workpiece thickness: 8 - 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (approx. 200 mm with corner copying) Edge thickness: 0.4 – 3.0 mm Pre-milling unit cutting depth: 0 – 2.0 mm, stepless Total installed power: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: - Surcharge for radius scraper unit with air-blast device + extraction - Surcharge for flat scraper unit + extraction - Surcharge for buffing unit Guedpow I U Drjfx Aqlec - EVA/PUR glue pot with discharge function - Surcharge for diamond tools, height = 65mm, for pre-milling unit - Riepe spray device (anti-adhesive) at pre-milling unit - Riepe spray device (cleaning spray before buffing unit) - Pipe system with 90° elbow + hand slider, mounted on machine, D = 200 mm Availability: short-term Location: Hochheim

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application for straight workpieces, flush trimming unit with vertical radius (VR) function, high-frequency (HF) milling unit, chain feed, twin roller top pressure, and extendable workpiece support rail. Suitable for ABS and PVC edge banding rolls as well as fixed lengths from 0.4 – 2.0 mm and workpiece heights from 8 – 50 mm. Feed speed: 5.5 m/min • 2 free positions for finishing units • 5.6" color touchscreen • Automatic edge feeding for roll material via a rotatable roll table, D=600 mm • Two counter-rotating, demand-activated jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free edging of the workpieces prior to edge application • Teflon-coated glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the pot), finely adjustable glue application via glue roller, separate glue roller temperature setting, electronic temperature control with automatic standby function (prevents glue from burning when the machine is on but idle for extended periods). (Optional: EVA/PUR glue pot with discharge/cleaning function for quick color change.) • Pressure zone consists of a driven pressure roller synchronized to the glue roller and an adjustable pressure roller with spring tension for optimal joint formation between edge material and workpiece, adjustable via SIKO indicator • Flush trimming unit for front and rear workpiece edges incl. VR function (for vertical contours), HF motor 0.27 kW / 12,000 rpm, automatic tracing on the workpiece, with extraction hood • High-frequency combination milling station, two powerful 0.27 kW HF motors with carbide-tipped special cutters, suitable for radius and chamfer trimming, horizontal and vertical tracing, unit adjustment equipped with digital counters for setting different edge types, height adjustment of the upper unit via the top pressure beam • 5.6" color touchscreen controls glue temperature settings, automatic standby temperature reduction, ON/OFF for units, and error diagnostics Gjdpfx Aqeip Uzpslouc • LED lighting inside the enclosure • Optionally available: Riepe spraying systems for anti-adhesive or cleaning agent Optional finishing units (2 free positions): • Radius scraper unit: Slight scraping cuts remove any cutter marks and provide a perfect finish. Fine adjustment via digital counter. • Surface scraper unit: Slight scraping cut removes any glue residue from the workpiece surface at the glue joint • Buffing unit: 2 motors, 0.05 kW, 1,500 rpm, for a top-quality finish on ABS and PVC edge material

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, One-sided automatic edge banding machine with jointing unit, hot-melt glue application on straight workpieces (EVA-PUR gluepot with draining function optional), 2-motor HF crosscut saw unit, HF multifunction milling unit, 2-motor corner copying unit, chain feed, motorized top pressure with encoder and double roller top pressure with ball bearings, extendable workpiece support rail, signal lamp for workpiece tracking, integrated routing control for contactless automation of machining functions as well as L-Motion control (18 axes). Suitable for ABS, PVC, melamine, and thick veneer roll materials, as well as fixed lengths from 0.4 – 3.0/5.0 mm and workpiece height from 10 – 60 mm. • Automatic edge feeding for roll material via rotating roll plate D=800 mm • Infeed extension (650 mm) with support • Automatic strip magazine (70 mm capacity) with spiked roller for solid wood lippings. • Two counter-rotating, demand-driven jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of workpieces before edge banding • Teflon-coated, quick-change gluepot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the gluepot), precise glue application via glue roller, individual glue roller temperature setting, electronic temperature control with automatic standby function (prevents the glue from burning if the machine is not used for an extended period but remains switched on). Optional: EVA/PUR gluepot with draining/cleaning function for quick color change • Pre-cutting shear for roll material up to 3 mm edge thickness. • Pressure zone comprising a powered pressure roller synchronized with the glue roller and two smaller, counter-conically designed press rollers with pneumatic pressure ensure optimum bonding between the edge material and workpiece; program-controlled setting for edge thickness with L-Motion motor Guodpfx Ajf Tdwceqlec • High-frequency crosscut saw equipped with two HF motors 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure clean and precise cutting, equipped with extraction hoods. Pneumatically swiveling from the control panel • High-frequency combination milling station, 2 powerful 0.55 kW HF motors with multifunction tools (straight + 3 different radii), horizontal and vertical workpiece tracing, each with 3 L-Motion motors for positioning the horizontal tracing shoes, positioning the vertical tracing shoes, and positioning the multifunction tool. 2 chip extraction hoods, height adjustment of the upper unit with top pressure. • Corner rounding unit: Automatic processing of corner edges up to 3 mm edge thickness. Equipped with 2 HF motors 0.27 kW, activated from the operating panel. Optionally single-sided (front or rear edge) or double-sided corner rounding. Each with 2 L-Motion motors for positioning the horizontal tracing shoes and positioning the tool. • Rotating control panel with 10" color touchscreen controls the glue temperature settings, automatic temperature reduction during machining breaks, activation/deactivation of units, error diagnostics, motorized top pressure, extensive program memory, and fully automatic operation of the machining units.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA-PUR glue pot with drain function optional), HF end trimming station, HF milling unit, chain feed, double roller top pressure, extendable workpiece support rail and signal lamp for workpiece tracking. Suitable for ABS, PVC, melamine and solid wood veneer roll material, as well as fixed lengths from 0.4–3.0mm and workpiece heights from 8–50mm. Feed speed: 7.0 m/min • 2 free spaces for finishing units • 7.0" color touch screen • Automatic edge feeder for roll material via rotatable roll table D=600 mm • Infeed alignment (400mm) with support • Two counter-rotating, demand-controlled jointing units with diamond-tipped spiral jointer cutters ensure clean and tear-free jointing of the workpieces before edge gluing • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue reservoir from below (excess glue is automatically returned to the glue pot), fine adjustable glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby function (prevents glue from burning when the machine is unused but still switched on). Optional: EVA/PUR glue pot with drain/cleaning function for quick color change • Pre-cutting shear for roll material up to 3 mm edge thickness • Pressure zone consisting of one driven pressure roller synchronized with the glue roller and one adjustable pressure roller with spring tension, for optimal bonding of the edge material to the workpiece, adjustment of the pressure zone with digital counter • High-frequency end trimming saw equipped with 0.21 kW HF motor, 12,000 rpm, 2 saw blades and high-precision linear guides for clean and precise cutting, equipment includes extraction hood • High-frequency combined milling station, two powerful 0.27 kW HF motors with HM-WPL special cutters, suitable for radius and bevel milling, horizontal and vertical sensing of the workpiece, unit adjustment equipped with digital counters for setting different edge types, 2 chip extraction hoods with central extractor port 2 x Ø 100 mm, height adjustment of upper unit with top pressure Gjdod R U Acspfx Aqlouc • Swiveling control panel with 7.0" color touchscreen controls glue temperature settings, automatic reduction of temperature when machine is not in use, on/off control of units and error diagnostics • LED lighting in the cabin • Riepe spray systems for anti-adhesive or cleaning agents available as options Optional finishing units (2 free spaces): • Radius scraper unit: Light pulling cut removes any radius milling marks to ensure a perfect finish. Fine adjustment using digital counter. • Flat scraper unit: Light pulling cut cleans the workpiece surface of any glue residues at the adhesive joint • Buffing unit: 2 motors 0.05 kW, 1,500 rpm for super finish on ABS and PVC edge materials

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application for straight workpieces (EVA-PUR glue pot with drainage function optional), 2-motor high-frequency cross-cut saw unit with tiltable motors, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece tracking, and integrated line control for contactless management of processing functions. Suitable for ABS, PVC, melamine, and thick wood veneer rolls, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 12.0 m/min.; 8.0 m/min. with corner copying. • 3 free slots for finishing units • 10" color touchscreen. • Two counter-rotating, demand-driven pre-milling units with diamond-tipped spiral cutters ensure clean, tear-free jointing of workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, designed leak-proof, with bottom glue reservoir (excess glue is automatically returned to the glue pot), finely metered glue application via glue roller, separately adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine remains switched on but unused for extended periods). Optional: EVA/PUR glue pot with drain/cleaning function for fast color changes Optional: Quick-change system for glue pots • Automatic strip magazine with spiked roller for wooden laths. • Pressure zone consisting of a powered pressure roller running synchronously with the glue roller and two smaller, oppositely tapered spring-loaded pressure rollers. • High-frequency cross-cut saw equipped with two HF motors (0.55 kW, 12,000 rpm), 2 saw blades, and high-precision linear guides for clean and precise cuts, equipped with extraction hood, manually tiltable. • High-frequency combination milling station: 2 powerful 0.55 kW HF motors with special HM-WPL cutters. • Corner copying unit: Automatic machining of edge corners up to 2 mm edge thickness. Equipped with a 0.27 kW high-frequency motor, switchable from the control panel. Choice of single-sided (front or rear edge) or double-sided corner copying. • Rotatable control panel with 10" color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtime, on/off of units, and fault diagnostics, including digital meter counter for edge material consumption. • LED lighting in the cabin. • Riepe spray systems for anti-stick, NFLY, and cleaning agents optionally available. Gujdel Rix Nspfx Aqloc Optional finishing units (3 free slots): • Radius scraper unit: Lightly scraping cut removes any milling traces in the radius and ensures a perfect finish. Fine adjustment via digital counter. • Flat scraper unit: Lightly scraping cut cleans the workpiece surface of any glue residues at the glue joint. • Buffing unit: 2 motors, each 0.09 kW, 1,500 rpm, deliver a superb finish for ABS and PVC edge materials.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with discharge function optional), high-frequency (HF) end trim saw unit, HF milling unit, corner copying unit, chain feed, double pressure rollers, extendable workpiece support rail, and signal lamp for workpiece sequence. Suitable for ABS, PVC, melamine, and solid wood veneer roll materials as well as fixed lengths from 0.4–3.0 mm and workpiece height from 8–50 mm. Feed speed: 7.0 m/min. • 2 free spaces for finishing units • 10.0'' color touchscreen. • Automatic edge feed for roll material via rotary reel table D=600 mm. • Infeed fence (400 mm) with support. • Two counter-rotating, demand-controlled pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free jointing of workpieces prior to edge banding. • Teflon-coated, quick-change glue pot with a 1.5 kg capacity, leak-proof with glue supply from below (excess adhesive is automatically returned to the pot), fine-adjustable glue application via glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is not used for longer periods but remains powered). Optional: EVA/PUR glue pot with drain/cleaning function for fast color change. • Pre-cutting shear for roll material up to 3 mm edge thickness. • Pressure zone consisting of a powered pressure roller synchronized with the glue roller and an adjustable pressure roller with spring tension, for optimal joint formation between edge material and workpiece, pressure zone adjustment with mechanical SIKO indicator. • High-frequency end trim saw, equipped with HF motor 0.21 kW, 12,000 rpm, 2 saw blades and high-precision linear guides for a clean and precise saw cut, equipped with extraction hood. • High-frequency combination milling station, 2 powerful 0.27 kW HF motors with carbide-tipped special cutters, suitable for radius and chamfer milling, horizontal and vertical scanning of the workpiece, unit adjustment with digital counters for different edge types, 2 chip extraction hoods with central suction connections 2 x Ø 100 mm, height adjustment of upper unit via top pressure. • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW HF motor, switchable from the control panel. Option for single-sided (front or rear edge) or double-sided corner copying. • Swivel control panel with 10.0'' color touchscreen for glue temperature settings, automatic temperature reduction when idle, on/off of units, and fault diagnostics. Geded R U Adepfx Aqljuc • LED lighting inside the enclosure. • Riepe spraying systems for anti-adhesive or cleaning agents available as an option. Optional finishing units (2 free spaces): • Radius scraper unit – Removes any traces left by radius milling with a light scraping cut for a perfect finish. Fine adjustment via digital counter. • Flat scraper unit – Cleans the workpiece surface of potential glue residue at the joint with a light scraping cut. • Buffing unit – 2 motors 0.05 kW, 1.50

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Semi-automatic edge banding machine for shaped workpieces, suitable for edge heights up to 140 mm. Feed speed: 2.5 – 12 m/min. Features quick-change system for the glue pot, Teflon-coated glue pot and glue roller, standby function, tiltable worktable up to 45°, and digital cross-cut device. Includes the following options: Gusdpfxod Sb Duj Aqloc • Electro-pneumatic premelting unit for cylindrical 2 KG cartridges • Patented top pressure feed system • Extendable support beam with steel balls

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Compact and flexible in the smallest of spaces. With a length of just 2.13 m, workpieces receive their finish here. Equipped with a 1.1 kW high-frequency motor jointing unit and diamond-tipped spiral jointing cutter, Teflon-coated glue application unit, pre-cutting unit, and HF multifunctional milling unit, plus 2 free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5" color touchscreen. Gedpfx Aqorrzkloljuc ► Control via 3.5-inch color touchscreen ► Jointing unit with a 1.1 kW high-frequency motor and diamond-tipped spiral jointing cutter running counter-rotating for clean and tear-free jointing of workpieces prior to edge banding ► Teflon-coated glue pot with automatic standby function ► Automatic edge feed with roller tray (D = 600 mm) for edge material in rolls and fixed lengths of 0.4 – 2.0 mm for ABS, PVC, or melamine edging ► Pressure station with 2 pressure rollers for optimal pressing of the applied edging ► HF multifunctional milling unit – suitable for radius and flush milling of longitudinal edges as well as processing the front and rear edges of workpieces, including vertical rounding of the edge ► 2 free slots for finishing units, such as a surface scraper or buffing unit ► Workpiece chain feed with rubberized chain plates and double roller top pressure ► Pressure beam with central adjustment and SIKO display ► Fixed workpiece support (optionally extendable for large workpieces) ► 400 mm long infeed fence with support ► LED lighting inside the enclosure (optional) ► Processing of workpieces from 10 – 45 mm thickness ► Feed speed 6.5 m/min ► Machine length 2130 mm

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application on straight workpieces (EVA/PUR glue pot with discharge function optional), 2-motor high-frequency end trimming station, HF combination milling unit, corner rounding unit, chain feed, motorized top pressure with encoder and ball-bearing double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, integrated line control for contactless control of processing functions, as well as L-Motion control (6-axis). Suitable for ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece height from 10 – 60 mm. • Two counter-rotating, application-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof design with glue supply from below (excess glue is automatically recirculated to the glue pot), precisely controllable glue application via glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic stand-by function (prevents glue from burning if the machine is not used for a longer period but remains switched on). Optional: EVA/PUR glue pot with discharge/cleaning function for quick colour change Optional: Quick-change system for glue pot • Pressure zone consists of a driven pressure roller synchronised with the glue roller and two smaller, oppositely tapered pressure rollers with spring tension, ensuring optimal bonding of the edging material to the workpiece. Motorized adjustment of the pressure zone (1x L-Motion) • High-frequency cross-cut saw equipped with two HF motors 0.55 kW, 12,000 rpm, two saw blades. Pneumatic swiveling from operator panel • High-frequency combination milling station, 2 powerful 0.55 kW high-frequency motors with carbide-tipped special cutters Gsdpfx Aqol Rix Eolouc Motorized adjustment of the milling station (4x L-Motion) • Corner rounding unit: Automatic processing of front and rear corners up to 2 mm edge thickness for PVC/ABS edging material. (Not recommended for soft- and post-forming profiles). Option for single-sided (front or rear) or double-sided corner rounding. Motorized adjustment of the corner rounding unit (1x L-Motion) • Swiveling control panel with 10″ colour touchscreen, length counter and remote access module • Standard equipment includes LED lighting and LED-Motion system • Optional: Motorized infeed fence adjustable from the control panel (1x L-Motion) Optional finish units (3 free spaces): -Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder, radius changeover R1/R2 via pneumatic switching from the control panel -Flat scraper unit: Removes glue residues from the glue joint area with a gentle scraping action, pneumatic ON/OFF control via air cylinder -Polishing unit: 2 motors with 0.09 kW, 1,500 rpm provide a high-quality finish

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt glue application for straight workpieces (EVA/PUR glue pot with draining function optional), HF end trimming saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece sequence, and integrated track control for contact-free operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll materials, as well as fixed lengths from 0.4–3.0/6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner rounding • 3 free spaces for finishing units • 10" color touchscreen display. Guodpfxod R U Ags Aqlsc • Automatic edge feeding for roll material via rotating turntable D=800 mm • Two opposing, program-controlled pre-milling units with diamond-tipped spiral jointing cutters ensure clean, chip-free workpiece edges before edge banding • Long infeed fence (650 mm) with support • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leakproof, bottom-feed glue supply (excess glue is automatically returned to the glue pot), precise glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby function (prevents glue from burning if the machine remains on but is not used for an extended period). Optional: EVA/PUR glue pot with draining/cleaning function for rapid color change • Automatic strip magazine (70 mm holding capacity) with spiked roller for solid wood lippings • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, counter-conically operated spring-loaded pressure rollers, ensures optimal edge joint with workpiece; pressure zone can be adjusted via digital counter • High-frequency end trimming saw equipped with 0.35 kW HF motor, 12,000 rpm, two saw blades and high-precision linear guides for clean, accurate cuts; extraction hood included • High-frequency combination milling station, two powerful 0.55 kW HF motors with HM-WPL special cutters, suitable for radius, flush, and chamfer milling; horizontal and vertical tracing of the workpiece; unit adjustment equipped with digital counters for different edge types; two chip extraction hoods with central Ø 100 mm connectors; height adjustment of top unit linked to upper pressure system • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness; equipped with 0.27 kW HF motor, switchable from control panel. Selectable single-sided (front or rear edge) or double-sided corner copying. • Swiveling control panel with 10" color touchscreen for controlling glue temperature settings, automatic temperature reduction in standby, on/off for units and fault diagnostics; including digital meter counter for edge material consumption • LED lighting inside the safety cabin • Riepe spray systems for anti-adhesive, NFLY and cleaning agents available as options Optional finishing units (3 free spaces): • Radius scraping blade unit: Light scraping action removes potential milling traces for a perfect finish.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Edgebanding machine for shaped parts with direct glue application to the edge material, suitable for thin and thick edge material from 0.4 – 3 mm. • Leak-proof glue pot with glue supply from below and quick heat-up time after machine downtime. Automatic start of the application roller after approx. 8-10 minutes. • Pressure roller driven by gearmotor, infinitely variable via potentiometer from 0-15 m/min. • Automatic edge feeding and automatic trimming operation for straight and contoured workpieces via foot switch. Gusdpfed Sb Dtex Aqloc • Pneumatic roller separation unit, max. 3 x 30 mm. • Foil plate, D = 600 mm.

Gamybos metai: 1999, būklė: naudotas, Griebtuvas 380 mm Ketvirtoji ašis Gusdpjx Edwnofx Aqloc Mašinos svoris apie 280 kg

Būklė: labai geros būklės (naudotas), Catalogue number 7382 TECHNICAL DATA Tenoning carriage: - Powered carriage feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor 0.46 kW - Table size (L/W): 700x450 mm, extendable to 1150 mm - Cross fence on carriage – cutting length on telescopic extension: 1860 mm - Swivel block in fence - 2 pneumatic clamps Cross-cut saw: - Max blade diameter: 380 mm - Max cutting height: 110 mm - Blade adjustable up/down, forward/back, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Height and stroke adjustment via handwheels - Max tool diameter: 320 mm - Spindle diameter: 40 mm - Spindle working height: 220 mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke Gujdszcu Tcspfx Aqlec - Height and stroke adjustment via handwheels - Max tool diameter: 200 mm - Spindle working height: 220 mm - Spindle diameter: 54 mm - Spindle lock - Retractable support from table - Motor: 7.5 kW Glazing bar cutting saw: - Max blade diameter: 200 mm - Bore diameter: 30 mm - Blade adjustable front/back, up/down - Blade guard - Motor: 2.2 kW Feeder: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50 mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameter: 60 mm, 2x130 mm, 110 mm, 100 mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600 mm, weight approx. 2500 kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Cross-cut saw – Tenoning spindle – Unpainted, used machine, very good condition Net price: 27,900 PLN Net price: 6,640 EUR based on a rate of 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, WEINIG Unicontrol UC 10-5 Window Manufacturing Machine Gujdpfx Aqexmr N Isloc 1. Electronically controlled cross-cut saw with laser-guided switching from saw cutting to zero-point wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for 6 x 80 mm tools, 15 kW motor 3. Longitudinal/profile spindle (synchronous) 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 4. Grooving spindle (between the 1st and 2nd lifting spindle) D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal profiling spindle 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 7. Clamping spindle 40 x 150 mm, axial cycle: 3 positions, radial cycle: 2 positions, 3 kW motor Right-side saw and grooving spindle, 3 kW motor Fitting spindle 40 x 150 mm, 3 kW motor Adjustable feed 6-12 m/min, 1.1 kW motor 4-position counter changer Electronic length stop 3600 mm Workpiece return via automatic rotating system Automation package Interval-controlled sash support Double parts package Laminate fabric tabletops (for sanded surfaces) Left-side pressure guide, max. timber width difference 100 mm Machine in very good technical and visual condition

Būklė: labai geros būklės (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, Mašina visiškai veikianti, geros būklės. Guodpexmr Rxofx Aqlec Darbiniai matmenys: 3200 x 2200 mm Matmenų reguliavimas elektriškai valdomas iš valdymo skydelio. Maitinama hidrauliniu agregatu.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: WKEAZ000001071950, tuščias svoris: 3 860 kg, didžiausias leistinas svoris: 14 140 kg, bendras svoris: 18 000 kg, ašių konfigūracija: 2 ašys, leistina ašies apkrova (ašis 1): 9 000 kg, leistina ašies apkrova (ašis 2): 9 000 kg, pirmoji registracija: 02/2022, kita apžiūra (TÜV): 02/2027, pakaba: oras, padang padangų: 90 procentas, spalva: juodas, Gamybos metai: 2023, Įranga: ABS,

Būklė: naudotas, Gamybos metai: 2023, Įtampa: 400V, 50Hz Srovė: 40 A Galia: 15 kW Gujdpfx Aqjzbvmheljc Darbinis slėgis: 4,5 bar Svoris: 1 600 kg Mūsų vertinimu, surinkimo įrenginys yra puikios, beveik naujos būklės. Techninės charakteristikos: - Surinkimo įrenginys atskirų detalių įpresavimui į baterijos aušinimo plokštę - Presavimo procesas naudojant pneumatinius cilindrus ir servovariklius - Aušinimo plokštės pneuminis siurbimas - Siemens valdymas Priedai, pavaizduoti įrankiai ir tvirtinimo priemonės į pristatymo komplektą įtraukiami tik tuo atveju, jei apie tai nurodyta papildomoje informacijoje. Pasiliekama teisė keisti techninius duomenis ir informaciją, taip pat galimas tarpinis pardavimas!

Būklė: nepatikrintas (naudotas), Gamybos metai: 2020, maks. ruošinio ilgis 6360 mm Frezuotojas 1 vnt. Pagrindinis variklis 13 kW Valdymas Maestro SCM CNC apdirbimo centras ACCORD 40 FX langams ir durims ----- ĮSKAITANT platų langų ir durų įrankių komplektą be kita ko (langų profiliavimas pagal užklausą!): Mediniai langai IV 68, 78, 92 Mediniai langai „Klasikiniai“ Medžio-aliuminio langai Lauko durys Pakeliamos-slankiojančios durys Dėžiniai langai Mašiną galima apžiūrėti dar dirbančią! Techninių duomenų santrauka (išsamesnė informacija pagal užklausą!): ----- - Darbo laukas X-Y = 6360x1905, Z = 350 - Automatinis stalas su 8 nešančiaisiais bėgiais MATIC – L1825 - 5 ašių MAXI sukimo galva - Prisma T, HSK 63 E, 13 kW - RTCP nustatymas – automatinė agregato Prisma kalibravimo sistema - Drožlių išmetimo įrenginys ant elektros suklio, reguliuojamas - Paruošimas „Prisma T-S“ kampinei pavara - BRC - darbo agregatas: pjūklo diskas galiniam apdirbimui, 1 frezavimo lizdas, vertikalus 3 nepriklausomos vertikalios gręžimo galvos, atstumas tarp ašių 32 mm 3 vertikalios gręžimo galvos (nepriklausomos viena nuo kitos), atstumas tarp ašių 21,5 mm, skirtos mechanizmo gręžimui 4 horizontalios gręžimo galvos (po 2 iš kiekvienos pusės, ne nepriklausomos), atstumas tarp ašių 21,5 mm 2 horizontalūs frezavimo galvutės (po 1 iš kiekvienos pusės) - TRC 48 – galinis įrankių magazinas Gedpsy Hl Iyefx Aqlsuc 48 įrankių vietos (be laikiklių) atstumas tarp pozicijų 104 mm maksimalus įrankio skersmuo 350 mm maksimalus įrankio ilgis 320 mm maksimalus svoris vienam įrankiui 10 kg (15 kg su HSK 63 E suklu) maksimali bendra svoris magazine 250 kg - MACH 5 – greito keitimo įrenginys: leidžia įrankį pakeisti ant elektros suklio per kelias sekundes. - Pakaitinis darbas (penduliavimas) - Automatinis ašių tepimas - eye-M valdymo pultas su integruotu PC - Papildomas stacionarus valdymo pultas - TECPAD – nuotolinis mašinos funkcijų valdymas - Griebtuvų paruošimas H145 darbiniam stalui su 8 bėgiais - Priekinė fiksavimo linija H110 stalui su 8 bėgiais - Galinė fiksavimo linija H110 stalui su 8 bėgiais - Siurbtukai H110 145x145 mm - Siurbtukai H110 145x55 mm, pasukami - Siurbtukai H110 180x65 mm, pasukami - Pirmoji šoninė fiksavimo linija H145 stalui su 8 bėgiais - Antroji šoninė fiksavimo linija H145 stalui su 8 bėgiais - Spaustuvai H145 su apvaliu pagrindu - Spaustuvai H145 su kvadratiniu pagrindu - 6 dvigubo kėlimo įrenginiai H145 - Lazeris ir atskaitos fiksatorius H145 arkai (kairėje) - Apsaugos sistema PRO-SPEED - Maestro cnc – vartotojo ir programavimo sąsaja - Maestro pro view – simuliacijos programinė įranga Įrankių pardavimas pagal būklę, komplektaciją ir priedus, esančius mūsų sandėlyje. Pastabos dėl langų profilių gamybos, įrankių brėžinių, įrankių sistemų sąrašų: Firma Engelfried nesuteikia jokios garantijos, kad realiai esantys įrankiai atitinka nurodytas ir pavaizduotas sistemas. (techninės specifikacijos pagal gamintoją – be garantijos!)

Būklė: nepatikrintas (naudotas), Aparatūros sandėlis taip_taip Striffler varčios aparatūros stalas ----- - su automatiniu suktuvu ir varžtų padavimu - aparatūros lentyna - Roto aparatūrai skirtas presas Gjdoyn R Iyspfx Aqleuc (techniniai duomenys pagal gamintoją, be garantijos!)

Būklė: nepatikrintas (naudotas), Slotting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window machining center ----- For sale on behalf of customer Manufacturer’s description: Designed for the production of individual parts, components, and small series. Spindle arrangement: One crosscut saw, a single tenoning and slotting spindle, a right-hand profiling spindle, a tenoning/slotting spindle, and a profiling spindle suitable for stacking multiple tools on top of each other, with pneumatic spindle movement. Slot table with motorized table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit. Height adjustment of the feed by manual control. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for precise frame or sash external dimensions. Control of tool positions (longitudinal and cross machining) via selector switch on the operator panel. Technical data ----- Crosscut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor: 3 kW Tenoning and slotting spindle ----- Number of tools: 3/4 pcs. for timber thicknesses IV 68 – IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thicknesses IV 68 – IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 232 mm Motor: 11 kW Special equipment: Synchronised spindle ----- Pneumatically actuated forward/backward motion for tear-free profiling of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, tool min. diameter: 112–140 mm, max. tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for synchronised spindle from 4 kW to 7.5 kW Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production possibilities: single pieces, double pieces, by frame, series production, profiling. Data input via keyboard with integrated user guidance and error diagnostics. 1 Groove spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Mounting length: 13 mm Clamping length: 40 mm Axial stroke: 2 positions Radial stroke: 2 positions Max. tool diameter: 130 mm Motor upgrade for groove spindle from 2.2 to 3 kW 1 hardware recessing unit, right: ----- For routing the hardware groove during profiling or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the operator panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting circle: min. 140 mm, max. 180 mm Home position below table: 10 mm Hardware router in special design: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial stroke, 2 positions Gjdjx Tu N Hspfx Aqlouc Motor upgrade for hardware routing spindle from 2.2 to 3 kW Hardware routing spindle for 230 mm tool diameter in and above table Electrical height adjustment of the feed with selector switch on the operator panel for 2 timber dimensions, includ...

Būklė: nepatikrintas (naudotas), Gamybos metai: 2009, max. workpiece length 4500 mm Milling spindle: 1 unit Main motor: 20 kW Control system: Siemens Weinig Conturex 2 C 114 ----- Working width: 40–260 mm Working height: 25–110 mm 2 x PowerGrip clamping tables, each 2280 mm ----- Workpiece length: 200 – 4,500 mm Machining of workpieces longer than 2,700 mm is carried out using a shuttle cycle. Main spindle 1: ----- Motor with brake, 20 kW HSK 63F Electronically adjustable speed: 2,000–18,000 rpm Maximum tool length from HSK 63 F reference surface: 290 mm With C-axis Tool magazine: ----- Number of slots: 30 Slot spacing: 100 mm Multi-spindle boring unit permanently installed Gusdjwunwyjpfx Aqlec ----- for horizontal and vertical drilling and milling without tool change ----- Price ex location Prices for Dismantling and loading onto customer truck Transport within Germany and abroad, reassembly, commissioning, and if required, new profiles available on request! Including used tools (drawings available on request!): ----- Wood: IV 68, 78, 88 inward and outward opening, with fitted drip rail Wood-aluminium: IV 68/68, 78/78, 87/68, 97/78 Lift/slide doors IV 68 and 78 Entrance doors IV 68 and 78 Pivoting windows Corner joint: counter/dowel Technical data as per manufacturer – without guarantee! Detailed technical description available on request!