Briaunų apklijavimo mašina

Lange B 80 KF-VR mit Fügen+VR Funktion

Būklė: naudotas, Gamybos metai: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for up to 100 mm edging height! Condition: factory-checked by Lange Maschinenbau Features and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feeding synchronized with conveyor belt - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber overlay - Digital counter for height adjustment - Direct glue application to the workpiece: drip-free glue pot with glue reservoir from below and fast heat-up time after machine downtime - End trimming unit: - For workpiece front and rear edges - Automatic sensing on the workpiece - Pneumatic trimming with blade for cuttable edges - Flush-milling unit - With vertical tracing and horizontal guidance - Reproducible settings via digital counters - 2 powerful 0.4 kW high-frequency motors - Infinitely adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - Central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the top milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable edge tape reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm Gjdswka S Ijpfx Ac Dobk - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without tape reel): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure your workpieces are optimally prepared for edge banding. The standard configuration includes a jointing unit (up to 2 mm milling depth), top-mounted quick-heating glue pot, end trim saw, and combination milling unit. Optionally, the F 2 can also be fitted with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 - 10 m/min Gbodpfolht Hzsx Ac Dek F2 Next Edgebander With PLC control (including touchscreen) and automatic glue application on the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change setup and glue discharge unit, high-frequency end trimming station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic height adjustment and interchangeable insert router (combination version), robust chain feed, ball-bearing double roller top pressure, inspection window at the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Būklė: naujas, The ALTENDORF F 25 offers everything a panel saw needs in a compact footprint. Whether it's for your first own workshop, daily use, industrial production, or as a powerful secondary machine—the F 25 is the space-saving all-rounder that simply makes you more productive. Materials such as wood-based panels, solid wood, wood-like materials, or extruded profiles can be efficiently processed with maximum precision, straightforward handling, and outstanding cut quality. The saw unit, which can tilt to one side, also enables angle cuts. The smooth-running double roller carriage based on the Altendorf system, as well as digital height and tilting display, are standard features. A machine equally suited for both beginners and professionals. Double roller carriage Tiltable Manual height and tilt adjustment Parallel fence with manual fine adjustment Angle/miter fence Preparation for subsequent installation of a scoring unit ----- Technical Specifications ----- Tilting range: 0 - 46° Carriage length: 3,200 mm Cutting width: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Max. blade projection: 104 mm Non-CE version: Max. saw blade Ø: 350 mm, Max. blade projection: 121.5 mm Crosscut fence extendable up to: 3,450 mm Gbjdpfou R S Hcsx Ac Dek Speeds: 4,200 rpm Motor output: 4.4 kW, 5.5 HP Working table height: 880 mm - Large extraction hood available as an option - - New display machine -

Būklė: naudotas, mašinos/transporto priemonės numeris: 006835, Type of attached edge: thin edge, thick edge Post-processing unit: yes Gbodpfx Acerl Utbo Dek Max. panel height: 55 mm

Būklė: dilaminuotas dirbtuvėje (naudotas), mašinos/transporto priemonės numeris: 591, Funkcionalumas: visiškai funkcionalus, Motor power 4 kW Table size 800 x 800 mm Spindle diameter 30 mm Extraction connection 120 mm Handwheel height adjustment Fence jaws adjustable individually Clockwise/counterclockwise rotation Speeds 3,000/4,000/6,000/9,000 rpm No brake Gedpfx Acsiw D Uho Djbk

Būklė: naujas, Gamybos metai: 2024, Roll-off frame for sheet metal (sheet width up to 1,250 mm). Godpfx Acsdv Duwo Dsbk

Būklė: naujas, The splitter separator has a diameter of 900 mm and can be supplied with sound insulation upon request. Drive: electric motor, 0.75 kW. Godpsvuku Nsfx Ac Debk

Gamybos metai: 2001, būklė: beveik kaip naujas (naudotas), Double-belt sander, two lower sanding heads, each with a main motor of 2 x 7.5 kW, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished. The conveyor belt is in very good condition. The graphite shoe is new. The machine features two lower units: the first is a rubber contact roller, and the second is a combination unit with a graphite shoe. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation system. Pneumatic belt tensioning. Sanding belt speed is 18 m/s. Conveyor belt feed speed is 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Rated total power: 21 kW. Maximum workpiece height: 160 mm. The machine is equipped with two lower working rollers. The conveyor belt operates from above. Gbodefxpbmopfx Ac Dek

Būklė: naudotas, Edge thickness: 0.4 – 5.0 mm Workpiece thickness: 10 – 50 mm Total length: 4000 mm Feed speed: 11 m/min Bimatic Edge Banding Machine Model: Prima 7.5 Two --- Manufacturer’s Description: Technical Specifications: - Edge thickness: 0.4 – 5 mm - Minimum panel width (without corner rounding unit): 80 mm - Minimum panel width (with corner rounding unit): 130 mm - Minimum panel length (without corner rounding unit): 100 mm - Minimum panel length (with corner rounding unit): 300 mm - Minimum panel thickness: 10 mm - Maximum panel thickness: 50 mm - Feed speed: 11 m/min - Extraction connection: 3 x 150 mm - Power supply: 9 kW – 400 V / Compressed air: 6 bar Units: - Jointing unit incl. AIGNER diamond jointer heads, with DIA quick-change knife system Konstantin and controlled edge air blast nozzle behind the 2nd jointer head. - Cross-cut saw unit with extraction system, including two pneumatically tiltable saw blades, adjustable and programmable from the control panel. - Multi-radius milling unit with four positioning motors, adjustable and programmable from the control panel. Includes diamond cutter with radius 1 mm and radius 2 mm. - Corner rounding unit (copy milling unit) with infeed function and pneumatic two-position revolver, adjustable and programmable from the control panel. The complete unit can be pneumatically engaged/disengaged from the control panel. Includes one quick-change motor with R=1 mm and one quick-change motor with R=2 mm. - Multi-radius scraper unit radius 1 mm and radius 2 mm with pneumatic four-position revolver. Unit can also be pneumatically engaged/disengaged. Includes extraction system with chip collection box for scraper waste. - Flat scraper unit with four-use scraper knives. Complete unit can be pneumatically engaged/disengaged. Residual glue is extracted. - Buffing unit with two diagonally arranged ORIGINAL Riepe cloth-sisal-lamella wheels for cleaning and polishing. Gbsdpfewgwl Dsx Ac Djk General Equipment: - 90° infeed guide - Telescopic extension with double support - Motorized adjustable infeed fence (jointing thickness adjustment), adjustable and programmable from the control panel - Motorized adjustable top pressure beam, adjustable and programmable from the control panel - Motorized adjustable pressure zone, adjustable and programmable from the control panel - 5 mm version: quick-change motors with reversible plate flush milling cutter, exchangeable for milling motors with radius cutters - High-gloss package: roller scanning for radius milling, radius scraping, and flat scraping units - Large transparent noise and protective hood for all units and the glue pot - Interior lighting - Operator panel with 15" touchscreen and intuitive user guidance - USB port for data backup and transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece gap control - Teflon-coated glue pot with quick-change system and energy-saving standby mode - Glue roller with feed screw for long and tall workpieces (especially for PUR adhesive) - Additional quick-change glue pot - Pressure zone with three pressure rollers, the first of which is motor-driven - Heavy-duty roller guillotine for edges 54 x 3 mm - Original RIEPE spray system - Before the jointing unit: LPZ II separating agent - Before the saw unit: LP 289/99 coolant and antistatic agent - ...

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Tested, functional equipment, used edge banding machine BIESSE Polymac LATO 38 model - Glue pot Gsdpfx Aeuhm Adoc Dobk - Guillotine (pre-cutting unit) - Front / rear end trim saw - 1 tiltable top/bottom flush trimming unit - 2 tiltable top/bottom flush trimming units - Outfeed brushes Possibility to test the machine at our premises Machine can be inspected in our Cosne workshop Price includes loading onto truck