Hebrock pirkti naudotą (48)

Sąlyga: naujas, Gamybos metai: 2024, IN STOCK!!!! Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Ijdjglfwtopfx Abkeik Feed speed: approx. 10 m/min Ready for operation: approx. 3.5 min Max. total connected load: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction nozzle: Ø 1 x 140 mm Edge banding machine with PLC control Joint milling unit (incl. DIA tool) up to 2 mm milling depth Combination milling head Radius miller R=2 mm Radius corner miller R=2 mm Radius scraper blade R=2 mm

Sąlyga: naujas, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (including touchscreen) Hotmelt adhesive application to the workpiece for edge material up to 3 mm Jointing cutter (including DIA tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change system including glue discharge device HF end trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic cutter adjustment and replaceable insert cutter (combination version) Robust chain drive Ball bearing-supported double roller upper pressure Inspection window on the rear of the machine Extendable workpiece support Iiedel D Rp Eopfx Abkek Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2002, Ši HEBROCK AKV 3003 DK-F buvo pagaminta 2002 m. Tai tvirta briaunų klijavimo staklė, kurios bendra galia – 10,5 kW, veikia 230/400 V ir 50 Hz įtampa. Puikiai tinka efektyviems briaunų klijavimo darbams. Daugiau informacijos apie šį įrenginį suteiksime susisiekus su mumis. Iijdpfx Abex E Eayekjk Pritaikymo sritys Briaunų klijavimas

Sąlyga: naudotas, Gamybos metai: 1996, Plokštės eigos kryptis: nuo operatoriaus į kairę maks. briaunos storis: 8,0 mm min. ruošinio plotis: 70 mm paieškos greitis: 11 m/min įkaitimo laikas: 4,5 min automatinis ritinių magazinas: taip kampavimo žirklės iki: 0,2–3,0 mm briaunos atskiras padavimas: taip automatinis klijavimas: klijų vonelė su granuliatu viršuje kapavimo pjūklas: fiksuotas 90° lyginimo frezavimo agregatas: taip kombin. frezavimo agregatas: taip agregatų displėjus: LED indikatorius valdymo tipas: rankinis valdymas: pasirinkimo jungiklis/mygtukai važiavimo įranga: taip apsauginis gaubtas: taip darbinis aukštis arba padavimo stalo aukštis: 870 mm svoris apytiksl.: 670 kg matmenys: 3600 x 1400 x 1200 mm variklio galia: 11 kW ištraukimo skersmuo: 120 mm Sandėliavimo vieta: tiekėjas Ijdpfx Aexwdp Uobkjik

Sąlyga: naudotas, Gamybos metai: 2015, Naudota mašina Pagaminimo metai: 2015 Būklė: labai prižiūrėta; mažai darbo valandų Įranga ir techniniai duomenys: - su PLC valdymu, įskaitant lietimui jautrų ekraną - su sujungimo frezavimo agregatu su DIA įrankiu iki 2 mm frezavimo gylio (sujungimo storis maks. 1 mm, naudojant specialias medžiagas, pvz., daugiasluoksnė plokštė) - su ištraukiama ruošinio atrama - su greito įkaitinimo klijų vonia su klijų keitimo įrenginiu - su atpjovimo pjūklu - su kombinuotu frezavimo agregatu r = 2 mm, su atskiru pneumatiniu frezavimo reguliavimu - su kampų apdirbimu r = 2 mm - su plokštumos braukliuku - maksimalus briaunos storis: 2 mm - min. - maks. ruošinio storis: 10 - 40 mm - minimalus ruošinio ilgis: 180 mm - padavimo greitis: apie 7 m/min - Parengties laikas: apie 3,5 min - Galingumo poreikis: apie 7,4 kW - Su važiuokle Ijdpfx Abjx Enqhskeik - Nusiurbimo jungtis: 1 x 140 mm Matmenys: apie 4.200 x 1.300 x 1.400 mm Svoris: apie 750 kg Galima naudoti: apie 2026 m. sausio pabaigą Vieta: Hesenas

Sąlyga: labai geros būklės (naudotas), Hebrock 3003 Edge Bander Iijdjwmc I Depfx Abkek Well-equipped, available for inspection before purchase Pre-milling cutters Zero-joint AirTronic hot air system (glue-free) Glue application with roller Pneumatic pre-cut guillotine Pressure rollers Anti-adhesive fluids Precision end-trimming saw Top/bottom milling unit, R1–R2 pneumatically adjustable Corner rounding unit, pneumatically adjustable Flat scraper Max. workpiece height: 50 mm Max. edge thickness (in roll): 3 mm Feed speed: 10 m/min Power supply required: 15.8 kW Condition: very good, fully operational

Sąlyga: naujas, Gamybos metai: 2024, IN STOCK!!! Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Ready for operation: approx. 3.5 min. Weight: approx. 900 kg Max. total connected load: Ø approx. 7.4 kW Extraction port: Ø 1 x 140 mm Electrical connection: 400 V - 3 Ph - 50 Hz Working table height: approx. 900 mm Feed speed: approx. 10 m/min. Machine dimensions: approx. 4,300 x 1,300 x 1,400 mm (LxWxH) Combi milling unit Radius milling R=2 mm Corner radius milling R=2 mm Radius scraper R=2 mm Iiedpohymgdefx Abkek

Sąlyga: naudotas, Kompaktiška briaunų klijavimo staklė Hebrock EURO 3001 tiksliam plokščių medžiagų briaunavimui su briaunų juostomis. Staklės užtikrina švarią briaunų apdirbimą automatiniu klijų užnešimu, prispaudimo voleliais ir apdirbimo agregatais. Idealiai tinka baldų gamybai ir interjero apdailai. Techniniai duomenys gali keistis. 1 agregatas: Klijų užnešimas 2 agregatas: Nupjovimas 3 agregatas: Lygus frezavimas Detalės aukštis: apie 10–40 mm Briaunos storis: maks. apie 12 mm Padavimo greitis: apie 10 m/min Ijdpfx Abexdc D Rjksik

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2015, Ši Hebrock TOP 2000 PLUS pagaminta 2015 metais. Tai naudota briaunų klijavimo staklė, turinti klijavimo, pjovimo ir kombinuotą frezavimo agregatą. Apdirba briaunų medžiagą, kurios storis nuo 0,5 iki 3 mm, bei ruošinius, kurių storis nuo 10 iki 45 mm. Ideali tiksliam briaunų apdirbimui. Susisiekite su mumis dėl detalesnės informacijos apie šį įrenginį. Pritaikymo sritys Briaunų klijavimas Iijdpfsx D Nlbjx Abksk

Sąlyga: naudotas, Gamybos metai: 2016, Plokštės judėjimo kryptis: nuo operatoriaus kairėn Maks. briaunos storis: 2 mm Min. ruošinio storis: 10 mm Maks. ruošinio storis: 40 mm Iisdpfex Hwq Tox Abksk Min. ruošinio ilgis: 180 mm Padavimo greitis: 7 m/min Įkaitimo laikas: 4 min Prapjovimo agregatas: taip, su 2 frezavimo agregatais Prapjovimo įrankis: deimantinis freza Skersmuo: 70 mm Aukštis: 43 mm Įvado liniuotės reguliavimas: deimantinis freza Kampavimo žirklės iki: 2 mm Individualus briaunos padavimas: galimas Klijavimas: klijų kontaktinis volelis Kampavimo pjūklas: taip Kombinuotas agregatas lyginimui/kampui/radiui: pneumatiniu būdu reguliuojamas Plokščioji grandymo geležtė: taip, su sekimu Agregatų rodymas: ekrane Valdymo tipas: PLC linijinis valdymas Valdymas: jutiklinis ekranas Variklio galia: 7,4 kW Važiavimo įrenginys: taip Ištraukiama ritininė atrama: taip Apsauginis gaubtas: taip Svoris apie: 750 kg Nusiurbimo diametras: 140 mm Elektros prijungimas: 400 Voltų / 50 Hz Sandėliavimo vieta: klientas

Sąlyga: naudotas, Gamybos metai: 1991, Naudota mašina Isdpfxjwka Tlo Abkjik Pagaminimo metai: 1991 Maks. ruošinio aukštis apie 40 mm Min. ruošinio ilgis apie 250 mm Min. ruošinio plotis apie 70 mm Padavimo greitis apie 11 m/min. Paruošimo darbui laikas apie 4-5 min. Energijos suvartojimas apie 11 kW Su šildomu įleidimo liniuotu Su greito šildymo klijų talpa Pneumatinis ritininis apipjovimas iki 3 mm Su apipjovimo pjūklu iki 5 mm briaunos storio Pagal pageidavimą su frezavimo stotimi, su kombinuotais sukamaisiais plokšteliniais frezais tinkama kampiniam, tiesiam ir nuožulniam frezavimui Išskleidžiama (nuleidžiama) ir priekyje ištraukiama sija Su važiuokle Su integruota nusiurbimo sistema Išmatavimai I x P x A: 3600 x 1400 x 1200 mm Svoris apie 670 kg Prieinamumas: greitai Vieta: Flörsheim

Sąlyga: naudotas, Okleinavimo staklės Hebrock AKV 3005, gerai sukomplektuotas, galimybė patikrinti prieš perkant, Skysčiai prieš frezas, Pradiniai frezai, Klijų padengimas voleliu, su klijų nuleidimu, Komplekte antras klijų indas, Pneumatinė išankstinė giljotina, Prispaudimo voleliai, Galutinis apipjovimo pjūklas, Frezuojantis agregatas viršuje-apačioje, R1 – R2 reguliuojamas pneumatiniu būdu, Profilinė ciklina, kampų apdirbimo agregatas, Ijdpfjw I Sp Sox Abksik Skysčiai prieš cikliną, Plokščioji ciklina, Poliratorius, Maks. okleinos storis ritinyje – 3 mm, Maks. užklijavimo storis – 12 mm, staklės labai geros būklės.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, veikimo valandos: 730 h, Edge banding machine Hebrock AKV3005DK-F with jointing, corner copying, and two scrapers. Very well-maintained machine from a small business, in excellent condition. Touchscreen interface with PLC control for easy machine operation, can store up to 12 operation programs. Iodpjtpn Etofx Abkoik Edge thickness for rolls approx. 0.4–3 mm Workpiece height approx. 8–53 mm Feed rate approx. 10 m/min Acoustic enclosure Extendable workpiece support, special equipment, extendable up to 950 mm Extraction connections 80 + 140 mm Units/Aggregates: Quick-change glue pot with glue outlet, includes two glue pots (1 used for EVA glue and 1 for PUR glue), the PUR glue pot is practically new—acquired for a single job. Top pressure manually adjustable with SIKO counter Infeed fence manually adjustable with SIKO counter Edge thickness manually adjustable with SIKO counter Joint milling with Leitz Whispercut diamond cutters, still sharp Gluing section with automatic edge infeed for coil material up to 3 mm Pressure zone with 4 rollers Cross-cut saw Integrated collection bin for edge offcuts Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Corner rounding cutter R2, pneumatic adjustment between thin and thick edge The contour cutter can also be used in shelf board mode, so only the straight edges are rounded, not the corners Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically retractable Hood lock CE marking Operating manual A video of the machine in operation can be sent on request. All the indexable inserts of the milling units and scrapers have been replaced or rotated; saws sharpened. The machine is therefore ready for immediate use. Only the diamond jointing cutters (Whispercut) have not been replaced, but are still sharp. Paint blemishes have been touched up. The Hebrock AKV series is the predecessor of the current K series. The machine has only approx. 730 operating hours (glue pot switched on), but the frequency inverters were only switched on for approx. 455 operating hours. The machine is in very good condition, see original photos. Machine dimensions approx. 5000 x 1400 x 1550 mm (LxWxH) Weight approx. 1550 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and available in our warehouse—see 'other offers from this seller.'

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 50 mm, briaunos storis (maks.): 3 mm, darbinio aukščio: 900 mm, reikalingas aukštis: 1 400 mm, vietos reikalavimas ilgis: 4 050 mm, reikalingas plotis: 1 300 mm, darbinis slėgis: 7 juosta, with PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge materials up to 3 mm: jointing cutter (including DIA tool), up to 2 mm cutting depth (max. 1 mm for special materials such as multiplex plywood), maintenance-free glue pot with quick-change system including glue discharge device, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic adjustment and indexable insert cutter (combination design), corner rounding cutter, surface scraper (including pneumatic lift), robust chain drive, ball-bearing mounted double roller upper pressure system, inspection window on the rear of the machine, extendable workpiece support, feed speed approx. 10 m/min. Complete with quick-change system for corner rounding cutter, radius scraper (including pneumatic lift), chassis. Iiedpfx Asx E N Nfebkek F 4 – Technical Data Max. edge thickness: 3 mm Min. / Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: 7 m/min Ready for operation: approx. 3.5 min Max. connected load: ∅ approx. 7.4 kW Electrical connection: 400 V / 3 Ph / 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction port: ∅ 1 x 140 mm

Sąlyga: naudotas, Gamybos metai: 2010, bendras ilgis: 5 250 mm, bendras aukštis: 1 780 mm, bendras plotis: 1 060 mm, Svoris: 1.500 kg Kaina: pagal užklausimą - Pagaminimo metai: 2010 - Dokumentacija prieinama: Ne - CE ženklinimas: Taip - CE sertifikatas: Ne - Serijos numeris: 1969 - Transporto matmenys: 5250mm x 1060mm x 1780mm (ilgis x plotis x aukštis) - Transporto svoris [kg]: 1500kg - Transporto paketai [vnt.]: 1 Iodpfx Aowp D Udebkeik Finansinė informacija PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimas: PVM atskaitomas juridiniams asmenims Pristatymas ir įrenginių priėmimas mainais galimi bet kada pramonės srityje Yorick Diebels

Sąlyga: naudotas, Gamybos metai: 2018, Edgebanding machine AKV 3006 DK - F with jointing unit including DIA tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combination milling station Radius R 2.5 mm Technical Description: - Application of hot-melt adhesive to workpieces for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with disposable insert cutters (combination type) and fine adjustment of cutter from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Adjustable cutting depth for cross-cut saw - Signal lamp for workpiece sequence - Robust chain drive Iodoxfh Tmopfx Abksik - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate inspection windows from the rear and operator sides of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thicknesses: 8 - 40 mm - Weight: approx. 1550 kg depending on configuration - Dimensions (L x W x H): 5250 x 1445 x 1600 mm - 2-point pneumatic cutter adjustment, 1 unit - Switching between radius / flush / chamfer on the combination milling stations - Switching between chamfer or flush is done manually by shifting the stop flap inside the machine - Buffing station (swab) 1 unit - Corner rounding cutter 1 unit including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm - Radius scraper 1 unit including pneumatic lifting device, radius R 2.0 mm - Surface scraper 1 unit with pneumatic engagement control - Glue pot quick-change system including second glue pot with downward glue outflow, 1 unit for quick color changes - Horizontal grooving saw unit into the edge, 1 unit including pneumatic lifting device and groove tool - Separate extraction for jointing unit, 1 unit directly at the jointing unit, vertically upward d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onward - Ball bearing for corner rounding cutter 24.1 mm, 1 unit - Ball bearing for corner rounding cutter 24.2 mm, 1 unit - Interchangeable motor 0.37 kW for corner rounding cutter, 1 unit with quick-change device including radius cutter R 1 - Interchangeable spindles, 1 set = 2 pieces, 1 unit - Set of quick-change motors for longitudinal processing above and below, including tool R 1 - Compressed air requirement: 100 - 150 l/hr Storage location: Nattheim

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3074, Y ašies padavimo greitis: 10 m/min, bendras ilgis: 4 984 mm, ruošinio aukštis (maks.): 60 mm, bendras plotis: 1 425 mm, briaunos storis (maks.): 3 mm, bendras aukštis: 1 618 mm, bendras svoris: 1 400 kg, įvesties srovės tipas: trifazis, aukščio reguliavimo tipas: mechaninis, įėjimo įtampa: 400 V, ekstrakcijos antgalio skersmuo: 140 mm, darbinio aukščio: 888 mm, įėjimo srovė: 32 A, įėjimo dažnis: 50 Hz, ištraukimo jungties skersmuo: 140 mm, paskutinio kapitalinio remonto metai: 2025, Due to the procurement of a new machine, we are selling our reliable edge banding machine, purchased new in 2016. The machine was operated in an 8-person joinery workshop. A complete overhaul was performed in January 2025, including new radius scrapers, new milling tools, and new polishing wheels. The pre-milling unit was re-sharpened. The coupling of the glue roller shaft was replaced. The glue tank underwent thorough refurbishment and cleaning. The machine is suitable for EVA granulate (e.g., Henkel Dorus KS351) and PUR gluing as well. The degree of pre-milling, edge band thickness, and the position of the lower and upper milling tools can all be conveniently adjusted by handwheels located outside the machine housing. The control system allows you to save custom edge banding programs. For 0.4 and 2.0 mm edge banding, the machine automatically switches pneumatically from the control panel. Iiedjxlr S Hopfx Abksk Main specifications: - Power rating: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100-150 l/min) - Touchscreen - Programmable/saved edge banding operations - Feed speed: 10 m/min - Edge material thickness in coil: 0.5-3.0 mm - Workpiece thickness: 8-60 mm (edge banding possible on 60 mm thick material) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Machining units: - Diamond pre-milling unit (12,000 rpm) - Separator fluid tank/sprayer - Gluing unit - End trimming saw - R2 milling unit - R2 radius scraper - Corner rounding unit - Cleaning fluid tank/sprayer - Flat scraper - Polishing wheel The price of the machine does not include VAT.

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft workshops. The F 5 ensures comprehensive edge processing at all stages, as it comes equipped with all the components required for your needs: pre-milling unit, end trimming saw, milling unit, radius scraping blade, corner rounding unit, surface scraper, and cleaning station. For even greater flexibility towards a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and glue application tailored to the workpiece for edge materials up to 3 mm; pre-milling unit (including DIA tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change pot preparation including glue drain feature, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter (combination version), corner rounding cutter, radius scraper, surface scraper (including pneumatic lift), cleaning station, robust chain feed, ball-bearing mounted double pressure roller, viewing window from machine rear, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change preparation corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper blade (R1/R2) F5/24/1 Spray unit for separating agent F5/24/2 Spray unit for cleaning agent F5/25. Edge spraying unit F5/27. Nesting for milling and radius scraper F5/30. Pneumatic 3-point adjustment (radius, bevel, and flush milling) Iedpfx Abjlht Hweksik Location: Ex stock 54634 Bitburg - Available in week 4 -

Sąlyga: naudotas, Gamybos metai: 2012, Kantų apklijavimo staklės HEBROCK AKV 3006 DK FS Maksimalus briaunos storis 3/8 mm Minimalus/maksimalus ruošinio storis 10/40 mm Minimali ruošinio ilgis apie 200 mm Minimali ruošinio plotis apie 80 mm Padavimo greitis apie 10 m/min Paruošta maždaug per 6 minutes Maksimali energijos sąnauda 12 kW Elektros prijungimas 400 V / 3 fazės / 50 Hz Išankstinis frezavimas Klijavimo mazgas Spaudimo volelis Nupjovimo pjūklas Iodpfxownhb Ss Abkoik Frezavimo mazgas Frezuoklės mazgas Kampinis apvalinimo įrenginys Spindulio grandiklis Plokščias grandiklis Valymo blokas Išmatavimai (ilgis x plotis x aukštis) 5250 x 1445 x 1600 mm, svoris 1550 kg - Pagaminimo metai: 2012 - Dokumentacija: nėra - CE sertifikatas: nėra Finansinė informacija PVM: nurodyta kaina be PVM PVM/Skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir mainai bet kada galimi visoms pramoninėms prekėms Yorick Diebels

Sąlyga: naudotas, Gamybos metai: 2011, pneumatinis frezavimo nustatymas (tiesus/radiusas) Kombinuota frezavimo stotis R=2 Kampų apvalinimo freza R=2 iki 40 mm Sujungimo freza iki 40 mm Plokščias grandiklis Profilinis grandiklis R=2 trumpoms detalėms Valdymas SPS su Pro Face jutikliniu ekranu Nestingas Aušinimo/antistatika purškimas - airtronic Apsauginis briaunos purškimas Riepe su keičiamu rezervuaru Ruošinio storis: 8–60 mm Mechaninis briaunų spaudimas Ištraukimo jungtis: 140 mm Matmenys: Ilgis su išsikišimu: 4984 mm Gylis su ritininiu stalu: 1425 mm Maks. aukštis: 1618 mm Darbo stalo aukštis: 888 mm Svoris: 1400 kg Isdpfx Ajxyiiljbkeik Sandėliavimo vieta: Nattheim

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure your workpieces are optimally prepared for edge banding. The standard configuration includes a jointing unit (up to 2 mm milling depth), top-mounted quick-heating glue pot, end trim saw, and combination milling unit. Optionally, the F 2 can also be fitted with a flat scraper. Iedpjlht Hzofx Abkoik Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 - 10 m/min F2 Next Edgebander With PLC control (including touchscreen) and automatic glue application on the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change setup and glue discharge unit, high-frequency end trimming station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic height adjustment and interchangeable insert router (combination version), robust chain feed, ball-bearing double roller top pressure, inspection window at the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock F 2 Iisdpei Am U Defx Abkok The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with all the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure workpieces are perfectly prepared for edge banding. Standard features include a jointing unit (up to 2 mm cutting depth), an overhead quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 – 10 m/min feed speed Edge Banding Machine F2 next With PLC control (including touchscreen) and glue application specifically calibrated to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tools) for up to 2 mm cutting depth, maintenance-free glue pot with quick-change system including glue drainage device, HF end trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and replaceable profile/flush trimming cutters (combination setup), robust chain feed, double roller pressure unit with ball bearings, viewing window from machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 mobile base F2/30 pneumatic 3-point adjustment (radius, bevel, and flush milling)

Sąlyga: naujas, Gamybos metai: 2025, Hebrock F 4 For complete processing of your panels For those who don't do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges in just 4 m of machine length. The F 4 is not just space-saving – it is also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Iiedpfx Abohqadcjkjk Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm PLC control via 10" touchscreen Top-mounted quick heating glue pot (maintenance-free) Support disc for edge material Automatic central lubrication (cut-off saw, corner milling unit) Optical indicator for workpiece sequence Outrigger (extendable to the front) Quick-change glue pot preparation including glue change device, suitable for PUR processing Surface scraper with dual sensor system Pneumatic trim shear (scissor-type design, Hebrock system) Double roller upper pressure (ball bearing mounted) Transport chain with fixed, special chain plates Joiner Milling unit Cut-off saw Corner milling unit Accessories: F4/09 radius scraper (incl. pneumatic lift-out) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: From stock 54634 Bitburg – available at short notice –

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock K 36 Top Equipment with Motorized Adjustment – Showroom Model – New Machine – - Immediately Available - This Hebrock evergreen offers unprecedented possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in everyday use. With the option to equip the machine with a profile milling unit and a multi-radius scraper, Hebrock sets new standards in perfect edge processing of various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Technical Data: Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Iiedpfx Aoi Am Ukjbksk Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1750 kg Features: • Hebrock K 36 – 15 m/min • K36 Edge Banding Machine • With PLC control (incl. 15" touchscreen), hot-melt adhesive provision directly onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 3 mm milling depth, maintenance-free coated glue pot with quick-change preparation incl. glue discharge device, high-frequency double-motor end trim saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with pneumatic adjustment and quick-change insert milling cutter (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift-out device), buffing station, robust chain drive, double-roller upper pressure with ball bearings, aggregate viewing windows on both machine rear and operator side, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, edge banding on workpieces up to 60 mm thick • 36/08/1 Quick-change corner rounding unit • 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 • 36/09/1 Multi-radius scraper • 36/24/1 Separator spraying device • 36/24/2 Cleaning agent spraying device • 36/25 Edge protective spray • 36/27 Nesting (1x milling station + 1x radius scraper) • 36/30 Pneumatic 3-point adjustment • 36/30/1 Multitool for HF milling station (R2/R1/chamfer) • 36/45 Axis package for motorized adjustment of panel/edge thickness and jointing depth settings Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding woodworking operations. The F 5 ensures comprehensive edge processing in every step, as it comes equipped with all the components necessary to meet your requirements: jointer, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even greater flexibility towards achieving the perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Iijdpfx Abei Anadskek Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and hot-melt adhesive application onto the workpiece for edging materials up to 3 mm; jointer (including diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change facility including glue discharge device, HF end trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable insert cutter (combination version), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller top pressure with ball bearings, viewing window from the machine’s rear, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 Quick-change unit corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Spray unit for edge F5/27. Nesting for milling and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: ex stock 54634 Bitburg Available calendar weeks: 4/2024