Hebrock Euro 3001 pirkti naudotą (44)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2016, mašinos/transporto priemonės numeris: 3214, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 40 mm, X ašies padavimo greitis: 10 m/min, bendras aukštis: 1 600 mm, bendras ilgis: 3 700 mm, bendras plotis: 1 445 mm, bendras svoris: 1 080 kg, TECHNINĖ INFORMACIJA Pavaros greitis: 10 m/min Plokščių storis: 8 - 40 mm Kraštinės storis maks.: 3 mm ĮRANGOS INFORMACIJA Darbo eiga: apie 100 000 m Matmenys ir svoris Matmenys (I x P x A): 3 700 x 1 445 x 1 600 mm Svoris: 1 080 kg ĮRANGA SPS valdiklis su lietimui jautriu ekranu Galingas atraminis/kirpimo peilis Klijuojantis agregatas su DIA frezavimo įranga Tirpstančių klijų indikacija ruošinii Patikima grandininė pavara Viršutinė valdymo pultas, greitas nustatymas iš operatoriaus pusės Dvigubas ritininis viršutinis spaudimas Signalinis žibintas ruošinių sekai Fedpfx Aey Hih Rsc Ijgc Greito pašildymo klijų talpa, nereikalaujanti priežiūros Pneumatinis ritinėlių apipjovimas iki 3 mm kraštinės storio Aukšto dažnio kapavimo pjūklas Aukšto dažnio freza su keičiamu plokšteliniu frezu Skirta radiusiniam, tiesiam ir nuožulniam frezavimui Ruošinio nupūtimas Integruota kraštinės medžiagos atliekų talpa Priekio ištraukiamas laikiklis Pastaba: Mašiną galima apžiūrėti įjungtą iki 19 savaitės vidurio.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Techniniai duomenys: • Gamintojas: Hebrock GmbH (Pagaminta Vokietijoje) • Tipas: EURO 2000 • Pagaminimo metai: 2000 • Įtampa: 230 / 400 V • Dažnis: 50 Hz • Galia: 7 kW • Srovės stiprumas: 13,6 A Darbinė sritis: • Ruošinio storis: apie 10–50 mm • Briaunos storis: apie 0,5–3 mm Fgsdpfx Aozbyvaec Ioc • Minimalus ruošinio ilgis: apie 250 mm • Minimalus ruošinio plotis: apie 70 mm • Padvymo greitis: apie 10 m/min • Reikalingas suslėgto oro prijungimas (apie 6–7 bar) Vieta: nuo sandėlio 54634 Bitburg - galima iš karto -

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Techniniai duomenys: • Gamintojas: Hebrock GmbH (pagaminta Vokietijoje) • Tipas: EURO 2000 • Pagaminimo metai: 1999 • Įtampa: 230 / 400 V • Dažnis: 50 Hz • Galia: 7 kW • Srovės sunaudojimas: 13,6 A Darbinis diapazonas: • Apdirbamo ruošinio storis: apie 10–50 mm • Briaunos storis: apie 0,5–3 mm • Min. ruošinio ilgis: apie 250 mm • Min. ruošinio plotis: apie 70 mm • Padavimo greitis: apie 10 m/min Fedpfx Ajy Ahtwec Ijgc • Reikalingas suslėgto oro pajungimas (apie 6–7 bar) Vieta: iš sandėlio 54634 Bitburg - galima pristatyti iš karto -

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, galia: 7 kW (9,52 AG), įėjimo įtampa: 400 V, įėjimo srovė: 16 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, ruošinio aukštis (maks.): 50 mm, briaunos storis (maks.): 3 mm, aukščio reguliavimo tipas: mechaninis, Hebrock EURO 2000 Edge Banding Machine – Completely Refurbished, Ready for Immediate Use For sale is a very reliable and robust edge banding machine made in Germany. The machine has been technically overhauled and is immediately ready for operation – ideal for joineries seeking a durable solution without investing in brand-new equipment. Radius and chamfer adjustment are pneumatically controlled. The machine can be tested on site. Condition / Works performed: - All pneumatic hoses replaced - 2 main cylinders replaced with new units - Machine fully cleaned - Technically inspected and ready for use Technical Data: - Manufacturer: Hebrock GmbH (Made in Germany) - Model: EURO 2000 - Year of manufacture: 2001 - Voltage: 230 / 400 V - Frequency: 50 Hz - Power: 7 kW - Current consumption: 13.6 A Working Range: - Workpiece thickness: approx. 10–50 mm - Edge thickness: approx. 0.5–3 mm - Min. workpiece length: approx. 250 mm - Min. workpiece width: approx. 70 mm - Feed speed: approx. 10 m/min - Compressed air connection required (approx. 6–7 bar) Fgjdpsy Nd H Hefx Ac Iec Delivery within a 150 km radius is possible for an additional fee. As we currently have new machines arriving and limited space, we have adjusted the price.

Būklė: labai geros būklės (naudotas), Hebrock F5 briaunų laminavimo staklės Gerai įrengta, galimybė patikrinti prieš perkant. Pradiniai frezai, Klijų uždėjimas voleliu, Yra klijų nuleidimas, Indas keičiama, Antras indas komplekte. Pneumatiniai išankstiniai giljotininiai peiliai, Prispaudimo voleliai, Galutinio pjovimo pjūklas, Skysčiai įeina, Frezuojantis agregatas viršus-apačia, R1 – R2, Fgedeza Uq Aspfx Ac Ijc Profilinė ciklina, Kampų apdirbimo agregatas, Plokščias ciklinas, Poliravimo įrenginys, Pneumatinis trijų taškų reguliavimas, Max. briaunos ritinyje storis 3mm, Energijos poreikis 7,8 kW, Maksimali detalės storis 50 mm, Naudota, labai geros būklės, Nudirbta 62 000 metrų.

Būklė: labai geros būklės (naudotas), PUIKI BŪKLĖ Hebrock briaunų klijavimo mašina Modelis: Top 2000 Mašinos aprašymas Įranga: - Šildymo juosta medienos drožlių plokštėms - Klijų talpa - Prispaudimo volelis - Priekinis ir galinis briaunų pjūklas Fgjdpfx Aszadx Aoc Iec - Viršutinė ir apatinė frezavimo stotis, radiusinis ir tiesus frezavimas - Mašinos ilgis: 3100 mm - Svoris: 600 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2024, ruošinio aukštis (maks.): 60 mm, X ašies padavimo greitis: 10 m/min, veleno greitis (maks.): 16 000 aps./min, valdymo tipas: PLC valdomas, The machine has already been disassembled and stored by a qualified technician. TECHNICAL DETAILS Cut-off saw station speed: approx. 16,000 rpm Milling station speed: approx. 16,000 rpm Max. milling depth: 3 mm Designed for edge thickness: 1 mm Maximum hot melt adhesive specification for edging material: 3 mm Feed speed: approx. 10 m/min Max. workpiece thickness: 60 mm EQUIPMENT Maintenance-free coated glue pot with quick-change preparation Glue discharge device Pneumatic milling adjustment Combination version with indexable insert cutter Corner rounding unit Radius scraper blade Surface scraper blade with pneumatic lifting device Buffing station Fgjdpezb Idfjfx Ac Iec Heavy-duty chain drive Ball-bearing double roller top pressure Unit inspection window accessible from the rear and operator side Signal lamp for workpiece tracking Extendable workpiece support ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling unit Hebrock jointing up to 60 mm workpiece thickness Hebrock edge protection spraying Hebrock nesting (milling unit + radius scraper blade) Hebrock Airtronic Note: Accessories offered without guarantee. The object is sold "as seen." The prospective buyer must verify the completeness of the item on site.

Būklė: beveik kaip naujas (naudotas), Hebrock F4 briaunų laminavimo staklės Gerai įrengtos, galima patikrinti prieš perkant, Pirminiai frezai, Klijų užtepimas voleliu, Yra klijų nuleidimas, Keičiama klijų talpa Pneumatinės pirminės giljotinos, Prispaudimo voleliai, Galutinis pjūkliukas, Viršutinis ir apatinis frezavimo agregatas, R1 – R2 Profilinė ciklina R1–R2 Keičiamas kampų apdirbimo agregatas iki 1mm ir 2mm Fgsdpfx Aey Dcmuoc Ijc Plokščia ciklina, Nesting funkcija Pneumatinis trijų taškų reguliavimas LED apšvietimas Maksimali briaunos storis iš ritinio – 3mm, Padavimo greitis: 7 ir 10m/min, Elektros poreikis: 7,08KW, Naujos komplektacijos kataloginė kaina virš 51 tūkst. EUR Mašina iš 2026 m., demonstracinė, 18 val. darbo.

Būklė: labai geros būklės (naudotas), Catalogue number: 7983 TECHNICAL DATA Equipment: - Disc - Pre-milling cutter - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) - End cutting unit with saw blades for front/rear - 2 edge milling units for top/bottom with radius cutters - 2 scrapers to remove excess glue, radiused top/bottom - Corner rounding unit - Straight scraper top/bottom - 2 polishers - Max feed speed: 10 m/min - Min length of workpiece: 260 mm Fedpfx Acsy Id Nlj Isgc - Min width of workpiece: 90 mm - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Retractable workpiece support from the table - Total power: 12.3 kW - Extraction connection diameter: 140 mm - Dimensions (LxWxH): 5000 x 1520 x 1600 mm - Weight: 1295 kg ADVANTAGES – Unpainted – Pre-milling, corner rounding – Operation panel with quick selection of preset work programmes – German-made – Full technical documentation (DTR) – Machine after servicing (last maintenance: 17/10/2025, next due: 17/10/2026) – Very good condition – Used edge bander Net price: PLN 38,900 Net price: EUR 9,260 (at an exchange rate of EUR 4.2) (Prices may vary depending on significant exchange rate fluctuations)

Gamybos metai: 2000, būklė: naudotas, Naudota mašina Pagaminimo metai: 2000 Fodpszbv Hnefx Ac Ijgc Įranga ir techniniai duomenys: Skirta vertikaliam briaunų apdirbimui iki 3 mm briaunos storio Su automatiniu frezavimo padavimu Su pastovu rėmu Elektros jungtis: 230 V Suslėgto oro jungtis: min. 6 bar Didžiausias ruošinio storis: 45 mm Įrankis r = 2,5 arba r = 3 Prieinamumas: trumpas pristatymo laikas Sandėlio vieta: 63934 Röllbach

Būklė: geras (naudotas), Kantavimo staklės Hebrock top 3003f Gerai sukomplektuota, galimybė patikrinti prieš perkant. Fjdpsy Tv Siefx Ac Ijgc PIRMIEJI FREZAI, klijų uždėjimas voleliu, pneumatinė preliminari giljotina, prispaudimo voleliai, galutinis pjūklo blokas, frezavimo agregatas aukštyn-žemyn, pneumatiškai reguliuojamas R1–R2, kampų apdirbimo agregatas, plokščiasis ciklinas, maks. kantavimo juostos storis ritinyje 3 mm, maks. aukštis 60 mm. Staklės geros būklės, paruoštos darbui.

Būklė: naudotas, Gamybos metai: 2000, bendras aukštis: 1 600 mm, bendras ilgis: 4 300 mm, bendras plotis: 840 mm, Color: Grey - Year of manufacture: 2000 - Documentation available: No - CE certificate available: No - Serial number: 404 - Number of units [pcs.]: 6 - 1st unit type: Gluing unit - Tools available: Yes - 2nd unit type: Pressure rollers - 3rd unit type: End trimming unit - Tools available: Yes - 4th unit type: Corner rounding unit - Tools available: Yes - 5th unit type: Radius scraper unit - Tools available: Yes - 6th unit type: Buffing unit - Tools available: Yes Fjdpfoykafaex Ac Isgc - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 15.8 - Power [kW]: 10.2 - Transport dimensions: 4300mm x 840mm x 1600mm (l x w x h) - Number of transport packages [pcs.]: 1 Financial Information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft workshops. The F 5 ensures comprehensive edge processing at all stages, as it comes equipped with all the components required for your needs: pre-milling unit, end trimming saw, milling unit, radius scraping blade, corner rounding unit, surface scraper, and cleaning station. For even greater flexibility towards a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and glue application tailored to the workpiece for edge materials up to 3 mm; pre-milling unit (including DIA tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change pot preparation including glue drain feature, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter (combination version), corner rounding cutter, radius scraper, surface scraper (including pneumatic lift), cleaning station, robust chain feed, ball-bearing mounted double pressure roller, viewing window from machine rear, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change preparation corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper blade (R1/R2) F5/24/1 Spray unit for separating agent F5/24/2 Spray unit for cleaning agent F5/25. Edge spraying unit F5/27. Nesting for milling and radius scraper Fgjdpelht Hwofx Ac Isc F5/30. Pneumatic 3-point adjustment (radius, bevel, and flush milling) Location: Ex stock 54634 Bitburg - Available in week 4 -

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with all the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure workpieces are perfectly prepared for edge banding. Standard features include a jointing unit (up to 2 mm cutting depth), an overhead quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 – 10 m/min feed speed Edge Banding Machine F2 next With PLC control (including touchscreen) and glue application specifically calibrated to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tools) for up to 2 mm cutting depth, maintenance-free glue pot with quick-change system including glue drainage device, HF end trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and replaceable profile/flush trimming cutters (combination setup), robust chain feed, double roller pressure unit with ball bearings, viewing window from machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 mobile base F2/30 pneumatic 3-point adjustment Fgedpsi Am U Dsfx Ac Ioc (radius, bevel, and flush milling)

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure your workpieces are optimally prepared for edge banding. The standard configuration includes a jointing unit (up to 2 mm milling depth), top-mounted quick-heating glue pot, end trim saw, and combination milling unit. Optionally, the F 2 can also be fitted with a flat scraper. Fgedpfx Aelht Hzoc Isc Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 - 10 m/min F2 Next Edgebander With PLC control (including touchscreen) and automatic glue application on the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change setup and glue discharge unit, high-frequency end trimming station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic height adjustment and interchangeable insert router (combination version), robust chain feed, ball-bearing double roller top pressure, inspection window at the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Būklė: naujas, Gamybos metai: 2025, Hebrock F 4 For complete processing of your panels Fgodpfxjhqadcj Ac Ijc For those who don't do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges in just 4 m of machine length. The F 4 is not just space-saving – it is also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm PLC control via 10" touchscreen Top-mounted quick heating glue pot (maintenance-free) Support disc for edge material Automatic central lubrication (cut-off saw, corner milling unit) Optical indicator for workpiece sequence Outrigger (extendable to the front) Quick-change glue pot preparation including glue change device, suitable for PUR processing Surface scraper with dual sensor system Pneumatic trim shear (scissor-type design, Hebrock system) Double roller upper pressure (ball bearing mounted) Transport chain with fixed, special chain plates Joiner Milling unit Cut-off saw Corner milling unit Accessories: F4/09 radius scraper (incl. pneumatic lift-out) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: From stock 54634 Bitburg – available at short notice –

Būklė: naujas, Gamybos metai: 2025, The Hebrock K 36 Top Equipment with Motorized Adjustment – Showroom Model – New Machine – Fgedpfxji Am Uke Ac Iec - Immediately Available - This Hebrock evergreen offers unprecedented possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in everyday use. With the option to equip the machine with a profile milling unit and a multi-radius scraper, Hebrock sets new standards in perfect edge processing of various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Technical Data: Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1750 kg Features: • Hebrock K 36 – 15 m/min • K36 Edge Banding Machine • With PLC control (incl. 15" touchscreen), hot-melt adhesive provision directly onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 3 mm milling depth, maintenance-free coated glue pot with quick-change preparation incl. glue discharge device, high-frequency double-motor end trim saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with pneumatic adjustment and quick-change insert milling cutter (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift-out device), buffing station, robust chain drive, double-roller upper pressure with ball bearings, aggregate viewing windows on both machine rear and operator side, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, edge banding on workpieces up to 60 mm thick • 36/08/1 Quick-change corner rounding unit • 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 • 36/09/1 Multi-radius scraper • 36/24/1 Separator spraying device • 36/24/2 Cleaning agent spraying device • 36/25 Edge protective spray • 36/27 Nesting (1x milling station + 1x radius scraper) • 36/30 Pneumatic 3-point adjustment • 36/30/1 Multitool for HF milling station (R2/R1/chamfer) • 36/45 Axis package for motorized adjustment of panel/edge thickness and jointing depth settings Location: Ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding woodworking operations. The F 5 ensures comprehensive edge processing in every step, as it comes equipped with all the components necessary to meet your requirements: jointer, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even greater flexibility towards achieving the perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and hot-melt adhesive application onto the workpiece for edging materials up to 3 mm; jointer (including diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change facility including glue discharge device, HF end trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable insert cutter (combination version), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller top pressure with ball bearings, viewing window from the machine’s rear, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 Quick-change unit corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Spray unit for edge F5/27. Nesting for milling and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: ex stock 54634 Bitburg Fgjdpfxei Anads Ac Ioc Available calendar weeks: 4/2024

Būklė: naudotas, Gamybos metai: 2011, pneumatinis frezavimo nustatymas (tiesus/radiusas) Kombinuota frezavimo stotis R=2 Kampų apvalinimo freza R=2 iki 40 mm Sujungimo freza iki 40 mm Plokščias grandiklis Profilinis grandiklis R=2 trumpoms detalėms Valdymas SPS su Pro Face jutikliniu ekranu Nestingas Aušinimo/antistatika purškimas - airtronic Apsauginis briaunos purškimas Riepe su keičiamu rezervuaru Ruošinio storis: 8–60 mm Mechaninis briaunų spaudimas Ištraukimo jungtis: 140 mm Matmenys: Ilgis su išsikišimu: 4984 mm Gylis su ritininiu stalu: 1425 mm Maks. aukštis: 1618 mm Darbo stalo aukštis: 888 mm Svoris: 1400 kg Fodpexyiiljfx Ac Iogc Sandėliavimo vieta: Nattheim

Būklė: geras (naudotas), Kantavimo staklės Hebrock top 2000 Fgedpfey Rpicox Ac Iec Klijų padengimas voleliu Pneumatinė išankstinio pjovimo giljotina Prispaudimo voleliai Galutinis nupjovimo pjūklas Frezuojantis agregatas viršus-apačia R1-R2 Maksimalus ruošinio aukštis 50 mm Maksimalus briaunos storis ritinyje 3 mm Padavimo greitis 10 m/min Staklių ilgis 310 cm Tvarkinga, geros būklės staklės.

Būklė: labai geros būklės (naudotas), Hebrock K36 Airtronic Edgebander – used – Features: - PC control with display - Touchscreen - Swiveling operator panel - Program memory Fgsdpfx Acoymyp Rj Ioc - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Motorized adjustable infeed fence - Diamond jointing cutters for both climb and conventional milling - Quick-heating glue pot - Glue pot quick-change system - Suitable for use with PUR adhesives - Cross-cut saw with HF motor - Flush milling unit - Flush/Radius/Chamfer milling unit - Pneumatic switching of milling units - Multi milling tool - Multi radius scraper - Chip collection box for radius scraper - Air nozzle at radius scraper - Surface scraper - Air nozzle at surface scraper - Interchangeable motor for corner rounding - Spray unit for separating agent - Spray unit for cleaning agent - Spray unit for antistatic coolant - Spray unit for lubricant - LED lighting in machine area - Interchangeable glue pots - Zero-joint Airtronic System ----- Technical Data ----- - Edge thickness (coil): 0.5-3 mm - Max. edge thickness for corner rounding: 3 mm - Workpiece thickness: 8-60 mm - Workpiece thickness for corner rounding: 45 mm - Min. workpiece length: 200 mm - Feed speed: 7-10 m/min - Support plate diameter for edging material: 850 mm - Guillotine for coil edges up to: 3 mm - Jointing cutter power: 2x2.2 kW - Cross-cut saw power: 0.37 kW - Milling station power: 2x0.37 kW - Corner rounding unit power: 0.37 kW - Buffing unit power: 2x0.18 kW - Extraction port Ø for jointing unit: 60 mm - Compressed air connection: 7 bar - Total length: 5,540 mm - Dimensions (LxWxH): 5,540 x 1,210 x 1,450 mm - Weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate operation

Būklė: labai geros būklės (naudotas), Modelis: Hebrock AKV 3006 DKF Išankstinis frezavimas Padavimo stotis Skersinio pjovimo pjūklai Viršutinis apatinis frezavimo peilis Fedpfx Aeyx Dfboc Iogc Kampų apipjovimas Grandiklis Poliruoklis

Būklė: naudotas, Hebrock K34 Briaunos storis iki 8 mm SPS ekraninis valdymas su 15" lietimui jautriu ekranu Išankstinio frezavimo agregatas prieš klijavimo mazgą (3 mm) Fjdpfswtfvkex Ac Isgc Klijų vonelė su keičiamu rezervuaru ir klijų išleidimo įtaisu Briaunos aukštis maks. 60 mm Pjovimo agregatas Frezavimo agregatas lygiam/radiuso/kampo frezavimui Kampų apvalinimo agregatas (radiusas/kampas) Daugiafunkcinė radiusinė grandyklė (R1/R2) Nestavimas Paviršinė grandyklė Skirtuko purškimo sistema Metai: 2023, 52 darbo val. Staklės NAUJOS, IDEALI BŪKLĖ Iš staliaus dirbtuvių uždarymo / išėjus į pensiją Parduodama iš dirbtuvių

Būklė: geras (naudotas), Gamybos metai: 2005, Markė: Hebrock Modelis: HFF 08 Mašinos Nr.: 08/379 Pagaminimo metai: 2005 Kraštų frezavimo staklės, skirtos vienu metu viršutiniam ir apatiniam spindulio/nulio švariam frezavimui nuo laužtų kraštų ant ruošinių su tiesiomis briaunomis bei ant apvalintų ruošinių su vidiniais ir išoriniais spinduliais. Techniniai duomenys: Maksimali kraštinės storis: apie 3 mm Maksimalus ruošinio aukštis: 50 mm Minimalus vidinis spindulys: 40 mm Frezavimo variklis: 12000 aps./min. Stalo aukštis: 865 mm Maks. slėgis: 6 bar Fgodoq H Spvspfx Ac Ijc Drožlių storis: 120 mm Frezavimo variklio galingumas: 0,37 kW Pagrindinis variklis: 1,5 kW, 50 Hz, 400 V, 3 fazės Sandėlio Nr.: 2001922

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, Prekės ženklas: Hebrock Modelis: AKV 83 F Pagaminimo metai: 2004 Mašinos Nr.: 10759 Techniniai duomenys: Apdirbamo ruošinio storis: nuo 10 iki 50 mm Padavimo greitis: 3 – 4 m/min Elektros jungtis: 220/380 V, 50 Hz Galia: 3 kW Matmenys: 1750 x 800 x 1250 mm (bendri matmenys) Svoris: apie 95 kg Įkaitinimas: 3 kW, su bepakopiu elektroniniu temperatūros reguliavimu, 0–650°C Variklis: 3,5 kW Fgodpju Racxefx Ac Ioc Sandėlio Nr.: 2002311BXA