Hebrock Top 1000 pirkti naudotą (44)

Būklė: geras (naudotas), Gamybos metai: 2009, mašinos/transporto priemonės numeris: 130, Funkcionalumas: visiškai funkcionalus, galia: 4,4 kW (5,98 AG), įėjimo įtampa: 400 V, įėjimo srovė: 10 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, ruošinio aukštis (maks.): 40 mm, briaunos storis (maks.): 2 mm, aukščio reguliavimo tipas: mechaninis, X ašies padavimo greitis: 7 m/min, pavaros tipas: elektrinis, bendras aukštis: 1 800 mm, bendras ilgis: 2 500 mm, bendras plotis: 1 300 mm, bendras svoris: 400 kg, paskutinio kapitalinio remonto metai: 2026, Įranga: CE žymėjimas, su karštų klijų padavimu ant ruošinio Iodpfx Ageyuff Hsfetd briaunavimo medžiagai iki 2 mm, ruošinio aukštis apie 10 – 40 mm priežiūros nereikalaujanti klijų vonelė paruošta darbui per ~3,5 min., HF kapavimo stotis (12 000 aps./min.), HF frezavimo stotis (12 000 aps./min.), įskaitant HM įrankį, paslankos greitis apie 7 m/min., ištraukiama ruošinio atrama stalviršio aukštis apie 900 mm, atsiurbimo jungtis D = 100 mm, svoris apie 400 kg bendroji galia 4,4 kW, 400 V, parduodama „tokios būklės, kokia yra“, iš Seevetal aikštelės be transporto ir pakuotės, pasilaikoma tarpinio pardavimo teisė

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2016, mašinos/transporto priemonės numeris: 3074, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo srovė: 32 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 3 mm, aukščio reguliavimo tipas: mechaninis, bendras aukštis: 1 618 mm, bendras ilgis: 4 984 mm, bendras plotis: 1 425 mm, bendras svoris: 1 400 kg, paskutinio kapitalinio remonto metai: 2025, ištraukimo jungties skersmuo: 140 mm, ekstrakcijos antgalio skersmuo: 140 mm, Y ašies padavimo greitis: 10 m/min, darbinio aukščio: 888 mm, Due to the procurement of a new machine, we are selling our reliable edge banding machine, purchased new in 2016. The machine was operated in an 8-person joinery workshop. A complete overhaul was performed in January 2025, including new radius scrapers, new milling tools, and new polishing wheels. The pre-milling unit was re-sharpened. The coupling of the glue roller shaft was replaced. The glue tank underwent thorough refurbishment and cleaning. The machine is suitable for EVA granulate (e.g., Henkel Dorus KS351) and PUR gluing as well. The degree of pre-milling, edge band thickness, and the position of the lower and upper milling tools can all be conveniently adjusted by handwheels located outside the machine housing. The control system allows you to save custom edge banding programs. For 0.4 and 2.0 mm edge banding, the machine automatically switches pneumatically from the control panel. Main specifications: - Power rating: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100-150 l/min) - Touchscreen - Programmable/saved edge banding operations - Feed speed: 10 m/min - Edge material thickness in coil: 0.5-3.0 mm - Workpiece thickness: 8-60 mm (edge banding possible on 60 mm thick material) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Machining units: - Diamond pre-milling unit (12,000 rpm) - Separator fluid tank/sprayer Iedpsxlr S Hofx Agfstd - Gluing unit - End trimming saw - R2 milling unit - R2 radius scraper - Corner rounding unit - Cleaning fluid tank/sprayer - Flat scraper - Polishing wheel The price of the machine does not include VAT.

Gamybos metai: 1995, būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 585, Marke: Hebrock Modell: AKV 1000 V Maschinennummer: 585 Baujahr: 1995 Technische Daten: Kantenbandstärke max.: 3 mm Kantenbandhöhe max.: 50 mm Vorschubgeschwindigkeit max.: 7,5 m/min Mit Trennmesser Arbeitstischlänge: 2200 mm Motor: 7 kW, 50 Hz, 230/400V, 3-phasig Transportmaße: Länge: 220 cm Itsdpfx Agjib H Slofsd Breite: 115 cm Höhe: 150 cm Lager-Nr.: 2001164BXM

Būklė: labai geros būklės (naudotas), Kantų klijavimo staklės Hebrock 3003 Gera komplektacija, galima patikrinti prieš perkant Priešfreziai Nulinė siūlė AirTronic beklijinė sistema – karštas oras Klijų padengimas voleliu, Keičiamas bakelis Pneumatinė pirminio pjovimo giljotina Prispaudimo voleliai Antiadhezininiai skysčiai Galutinis pjūklas Viršutinis/apatinis frezavimo agregatas, R1 – R2 pneumatiškai reguliuojamas Isdpfx Aoyvq Dfogfetd Kampų užbaigimo agregatas pneumatiškai reguliuojamas Pneumatinė plokščioji ciklina Maks. elemento aukštis 50 mm Maks. kantų storis ritinyje 3 mm Padavimas 10 m/min Labai gera būklė, pilnai veikianti Galima įsigyti lizingu

Būklė: naujas, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (including touchscreen) Hotmelt adhesive application to the workpiece for edge material up to 3 mm Jointing cutter (including DIA tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change system including glue discharge device HF end trimming saw station (approx. 12,000 rpm) Iodjl D Rp Ejpfx Agfstd HF milling station (approx. 12,000 rpm) with separate pneumatic cutter adjustment and replaceable insert cutter (combination version) Robust chain drive Ball bearing-supported double roller upper pressure Inspection window on the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Būklė: naudotas, Gamybos metai: 2022, Jungiamoji galia 7,8 kW Daugia-radiusinis peilis (R2/R1) Paviršiaus traukimo peilis Tinko stotelė Pneumatinis važiuoklė 3 taškų reguliavimas Sujungimas iki 50 mm ruošinio storio Kampinis frezavimo įrenginys R=2 LED vidaus apšvietimas Atskyriklio purškimo sistema Valymo priemonės purškimo sistema Ijdpfx Asyvht Rsgfetd Sandėliavimo vieta: Tiekėjas

Būklė: naudotas, Gamybos metai: 2000, bendras aukštis: 1 600 mm, bendras ilgis: 4 300 mm, bendras plotis: 840 mm, Price: On request - Year of manufacture: 2000 - Documentation available: No - CE certificate available: No - Serial number: 404 - Number of units [pcs]: 6 - 1st unit type: - Tools included: Yes - 3rd unit type: - Tools included: Yes - 4th unit type: - Tools included: Yes - 5th unit type: - Tools included: Yes - 6th unit type: - Tools included: Yes - Voltage [V]: 400 Itodpfxsykafas Agfed - Current consumption [A]: 15.8 - Power output [kW]: 10.2 - Transport dimensions: 4300mm x 840mm x 1600mm (L x W x H) - Transport packages [qty]: 1 Financial Information VAT: The indicated price is exclusive of VAT VAT/differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Būklė: labai geros būklės (naudotas), Hebrock AKV 3006 DKF briaunų klijavimo staklės Išankstinis frezavimas Klijavimas Skersiniai pjūviai – priekinė ir galinė pusės Isdpfsylpr Eox Agfetd Reguliuojami frezai Tiesūs frezai Kampų pjaustytuvas Profilinis grandiklis Tiesinis grandiklis Poliravimo staklės Pagaminimo metai: 2010

Būklė: geras (naudotas), Gamybos metai: 2007, mašinos/transporto priemonės numeris: 1386, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo srovė: 31 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, ruošinio aukštis (maks.): 50 mm, briaunos storis (maks.): 8 mm, aukščio reguliavimo tipas: mechaninis, paskutinio kapitalinio remonto metai: 2025, Hebrock Edge Banding Machine AKV 3003 DK F Edge banding machine with hot-melt adhesive application directly to the workpiece for edge material up to 8 mm and jointing, including DIA tooling - Ergonomically arranged control panel - Easy adjustment options from the operator side (digital displays) - Maintenance-free quick-heating glue pot - Robust chain drive - High-frequency end trimming saw (300 Hz) - High-frequency flush trimming unit including tooling and fine adjustment from the operator side - Automatic edge feed - Protection and sound insulation hood - Extendable workpiece support Itsdeyud Sfjpfx Agfed - Electronic temperature controller - Pneumatic end trimming up to max. 3 mm edge thickness and 60 mm edge height - Double roller top pressure - Signal lamp for workpiece feed - Aggregate viewing window from both back and operator's side - Safety standard according to CE Complete with: - Surface scraper unit - Corner rounding unit - 8 mm edge thickness Workpiece height approx. 10 – 40 mm Feed rate approx. 10 m/min Power consumption 11 kW (31 A) 400 Volts, 50 Hz Length approx. 4300 mm Weight approx. 1250 kg Sale in "as is" condition as inspected ex location Seevetal without transport and packaging, Subject to prior sale.

Būklė: naudotas, Gamybos metai: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Unit including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combination milling station radius R 2.5 mm. Technical Description: - Application of hotmelt adhesive to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable insert cutters (combination version), fine adjustment of the cutter from the operator side - Free slots for additional processing aggregates (Hebrock System) - Feed rate approx. 10 m/min - Cutting depth adjustment for the crosscut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate viewing windows from the rear and operator side - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on equipment) - Dimensions (L x W x H): 5,250 x 1,445 x 1,600 mm Airtronic including cooling and antistatic spray device (built 2014) - 1 pc. hot air unit for producing optical zero joint when using the appropriate edge materials - Incl. pneumatic glue pot positioning Iodex S Hmzepfx Agfetd - Incl. cooling and antistatic spray device - Incl. 2 additional quick-change edge channels - Incl. special corner rounding trimming unit, max. workpiece thickness 60 mm, min. workpiece length 200 mm - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible – extra costs upon request - Technical data: max. panel thickness 40 mm, edge thickness 1.2 – 2.0 mm, 7 – 10 m/min feed speed, air consumption approx. 280 – 580 l/min (Airtronic only), electronically controlled, ready for operation after approx. 2 min Upgrade to 8 mm edge thickness: - 1 pc for max. workpiece thickness 40 mm - Incl. pneumatic saw adjustment, special version for min. workpiece thickness 8 mm - 1 pc 3-point pneumatic milling adjustment - 1 pc switching for radius – chamfer – flush for the combination milling stations, eliminating manual adjustment for the third stop position (PLC control required) - Buffing station (polishing wheel) 1 pc - Corner rounding trimming unit 1 pc incl. combination tool and pneumatic setting for chamfer/radius, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm - Radius scraper 1 pc incl. pneumatic lifting device, radius R 2.0 mm - Surface scraper 1 pc with pneumatic engagement control - Complete chassis 1 pc - Glue station change system incl. glue discharge device downward (preparation) 1 pc; without second glue pot – includes the ability to process PU adhesives - Groove saw unit vertical in the panel 1 pc incl. pneumatic lifting device, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm - Special version groove saw motor with higher power - Extraction unit for jointing aggregate (internal) 1 pc at the machine's extraction manifold - Ball bearing for corner rounding cutter 24.1 mm 1 pc - Ball bearing for corner rounding cutter 24.2 mm 1 pc - Protective agent spray device 1 pc for edge surfaces on sensitive edge materials - Combined spray device for panel (separating and cleaning agent spraying) Location: Supplier’s stock

Būklė: naudotas, Gamybos metai: 2012, bendras aukštis: 1 600 mm, bendras ilgis: 5 250 mm, bendras plotis: 1 440 mm, Kantų klijavimo staklės HEBROCK AKV 3006 DK FS Maksimalus kantų storis: 3/8 mm Minimalus/maksimalus ruošinio storis: 10/40 mm Minimalus ruošinio ilgis: apie 200 mm Minimalus ruošinio plotis: apie 80 mm Padavimo greitis: apie 10 m/min. Ijdewnhb Sspfx Agfjtd Paruošta per maždaug 6 minutes. Maksimali galia: 12 kW Elektros įvadas: 400 V / 3 fazės / 50 Hz Įranga: - Ikiklijavimo apdirbimas - Klijavimo modulis - Spaudimo volas - Nupjovimo pjūklas - Frezavimo mazgas - Frezavimo mazgas - Kampų užapvalinimo įrenginys - Spindulio briaunos grandiklis - Plokščias grandiklis - Valymo modulis Išmatavimai (ilgis x plotis x aukštis): 5250 x 1445 x 1600 mm, svoris 1550 kg - Pagaminimo metai: 2012 - Dokumentacija: Nėra - CE sertifikatas: Nėra - Transportavimo matmenys: 5250mm x 1445mm x 1600mm (i x p x a) Finansinė informacija PVM: Pateikta kaina nurodyta be PVM PVM/skirtumų apmokestinimas: PVM atskaitomas verslui Pristatymas ir senos įrangos priėmimas visada galimi visoms pramoninėms prekėms Yorick Diebels

Būklė: naudotas, Okleinavimo staklės Hebrock AKV 3005, gerai sukomplektuotas, galimybė patikrinti prieš perkant, Skysčiai prieš frezas, Pradiniai frezai, Klijų padengimas voleliu, su klijų nuleidimu, Komplekte antras klijų indas, Pneumatinė išankstinė giljotina, Prispaudimo voleliai, Itsdew I Sp Sspfx Agfjd Galutinis apipjovimo pjūklas, Frezuojantis agregatas viršuje-apačioje, R1 – R2 reguliuojamas pneumatiniu būdu, Profilinė ciklina, kampų apdirbimo agregatas, Skysčiai prieš cikliną, Plokščioji ciklina, Poliratorius, Maks. okleinos storis ritinyje – 3 mm, Maks. užklijavimo storis – 12 mm, staklės labai geros būklės.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, Šis "HEBROCK AKV 3003 DK-F" buvo pagamintas 2002 m. Tvirtas 10,5 kW bendros galios, veikiantis 230/400 V ir 50 Hz įtampa. Idealiai tinka efektyvioms briaunų apipjaustymo operacijoms. Susisiekite su mumis ir gaukite daugiau informacijos apie šią mašiną. • Bendra galia: 10500 W • Įtampa: 230/400 V Iodpjx E Eayefx Agfjtd • Dažnis: 50 Hz • Srovė: 26,5 A

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, bendras aukštis: 1 530 mm, bendras plotis: 1 200 mm, bendras svoris: 1 150 kg, gaminio ilgis (maks.): 4 700 mm, 2004 m. pagamintos briaunų šlifavimo staklės. Šio "HEBROCK AKV 3005 DK-F" didžiausias briaunos storis - 3 mm, o ruošinio storis - nuo 8 iki 60 mm. Jame yra jungiamojo frezavimo įrenginys su 2 frezavimo galvutėmis, klijavimo rezervuaras su kontaktiniu velenėliu ir kombinuotasis frezavimo įrenginys, kuris reguliuojamas pneumatiniu būdu. Jei norite gauti aukštos kokybės kraštų apklijavimo galimybes, apsvarstykite mūsų parduodamas "HEBROCK AKV 3005 DK-F" stakles. Susisiekite su mumis dėl išsamesnės informacijos. • Maksimalus kraštų storis: Didžiausias leistinas briaunos storis: 3 mm. • Ruošinio storio diapazonas: 8-60 mm • Padavimo greitis: apie 10 m/min • Paruošimo laikas: apie 5 min. • Mažiausias ruošinio ilgis: 190 mm • Mažiausias ruošinio plotis: 80 mm • Valdymas: VALDYMAS: PLC • Paruošimas keičiamiems padėklams • Vienetai / stotys: • Frezavimo įrenginys su 2 frezavimo galvutėmis • Klijavimo talpa su kontaktiniu velenėliu • Slėgio zona • Apipjaustymo žirklės • Apipjaustymo pjūklas • Kombinuoto frezavimo įrenginys (lygus/šoninis/radiusinis), reguliuojamas pneumatiniu būdu • 2 frezavimo stotys • Kampų kopijavimo įrenginys • Trumpo paviršiaus grandiklis Itodpfx Asyma A Regfsd • Radiuso grandiklis • Purškimo įrenginys

Būklė: naudotas, Gamybos metai: 2014, with jointing milling unit including DIA tools, jointing depth up to 40 mm, workpiece thickness up to 3 mm; combination milling station, radius R 2.5 mm Technical Description: - Application of hot melt adhesive to workpiece for edge materials up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit - Maintenance-free, coated glue pot - HF-trimming station (16,000 rpm) for front and rear edge overhangs - HF-milling station (16,000 rpm) with interchangeable insert cutter (combination version) and fine adjustment for the cutter from the operator side - Free spaces for additional processing units (Hebrock system) - Feed rate approx. 10 m/min - Cut depth adjustment for trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically positioned control panel - Double-roller top pressure beam - Aggregate viewing windows from rear and operator side - PLC control system including touchscreen Technical Data: - Feed speed 10 m/min - Panel thicknesses 8 - 40 mm - Weight: approx. 1400 kg depending on configuration - Dimensions (L x W x H): 5000 x 1445 x 1600 mm Airtronic for machines up to 8 mm edge thickness, 1 pc Itodpfoyfp N Dsx Agfjd Technical Data: - Edge thickness 1.2 mm – 3.0 mm possible - Maximum panel thickness 25 mm - Feed speed 7 – 10 m/min depending on edge material - Ready for operation in 3 minutes - Air consumption approx. 800 l/min for complete machine - Maximum current 32 A / 16 kW for complete machine; higher power connection required for machines with groove saw - Extraction as before - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 pc, up to a maximum of 40 mm workpiece thickness Including pneumatic saw adjustment Separate pneumatic milling adjustment, 1 pc, controllable from operating panel (straight/radius) Buffering unit (polishing station), 1 pc Corner rounding cutter, 1 pc, including combination tool and pneumatic adjustment for bevel/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Radius scraper, 1 pc, including pneumatic retraction device, radius R 2.0 mm Flat scraper, 1 pc, with pneumatic control Glue station quick-change system in preparation, 1 pc, without second glue pot – including possibility to process PU glue with the machine – without downward glue runoff device Special cleaning system for PU glue downward runoff, 1 pc 60 mm panel thickness for machines with jointing, 1 pc – maximum workpiece thickness with jointing unit 60 mm – jointing depth 40 mm – 60 mm – workpiece thickness up to 2 mm Special infeed fence for overloaded panels, 1 pc, 16 mm and 19 mm thickness, maximum projection of the covering 8 mm Separate extraction for jointing unit, 1 pc, directly on jointing unit, vertically upwards, d=80mm, for optimal extraction performance from AKV 3005 DK-F onwards highly recommended Ball bearing for corner rounding cutter 24.1 mm, 1 pc Ball bearing for corner rounding cutter 24.2 mm, 1 pc Nesting for the combination milling unit, 1 pc, for machining workpieces with hinge cup drillings, only possible on the underside of the workpiece Nesting for the radius scraper unit, 1 pc, for machining workpieces with hinge cup drillings, only possible on the underside of the workpiece Release agent spraying unit, 1 pc Cleaning agent spraying unit, 1 pc, to facilitate removal of glue residue Antistatic spraying unit, 1 pc, absolutely necessary with airtronic; antistatic coolant is sprayed onto the inner

Būklė: naujas, Gamybos metai: 2026, Your entry into edge banding couldn’t be better, as the 3.3 m long F 2 is not only affordable and space-saving. It also comes equipped with all the features you need to achieve perfect edges from the very start: diamond-tipped jointing cutters ensure that your workpieces are optimally prepared for edge banding. Standard features include a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, end trimming saw, and combination cutter. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 10 m/min Ready for operation: approx. 3.5 min Max. power consumption: Ø approx. 5.9 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: approx. 3350 x 1300 x 1400 mm (LxWxH) Worktable height: approx. 900 mm Itodsglfw Nopfx Agfod Weight: approx. 620 kg Extraction port: Ø 1 x 140 mm

Būklė: naujas, Gamybos metai: 2026, Maks. briaunos storis: 3 mm Min./maks. ruošinio storis: 8 - 50 mm Min. ruošinio ilgis: apie 160 mm Paruošta darbui: apie 3,5 min. Svoris: apie 900 kg Maks. galingumo sąnaudos: Ø apie 7,4 kW Ištraukimo antgalis: Ø 1 x 140 mm Elektros jungtis: 400 V - 3 fazės - 50 Hz Iedohymgdopfx Agfotd Darbo stalo aukštis: apie 900 mm Padavimo greitis: apie 10 m/min Staklių matmenys: apie 4.300 x 1.300 x 1.400 mm (Ilg x Pl x Auk) Kombinuota frezavimo galvutė Radiuso freza R = 2 mm Radiuso kampinė freza R = 2 mm Radiuso traukimo peilis R = 2 mm Briaunos purškimo sistema Pneumatinis 3 taškų reguliavimas (radiusinis, kampinis, lygus frezavimas)

Būklė: naujas, Gamybos metai: 2026, Maks. briaunos storis: 3 mm Min./Maks. ruošinio storis: 8–50 mm Min. ruošinio ilgis: apie 160 mm Padavimo greitis: apie 10 m/min. Paruošimo darbui laikas: apie 3,5 min. Maks. galingumo poreikis: Ø apie 7,4 kW Elektrinė jungtis: 400 V – 3 fazės – 50 Hz Darbo stalo aukštis: apie 900 mm Staklių matmenys: apie 4050 x 1300 x 1400 mm (Ilg. x Pl. x Aukšt.) Svoris: apie 820 kg Išsiurbimo antgalis: Ø 1 x 140 mm Briaunų klijavimo staklės su PLC valdymu Sujungimo freza (su DIA įrankiu) iki 2 mm pjovimo gylio Kombinuota frezos galva Spindulio freza R=2 mm Kampų spindulio freza R=2 mm Spindulio gremžtukas R=2 mm Itedpsglfwtjfx Agfed Spindulio gremžtukas (su pneumatiniu pakėlimu) Krašto purškimo įrenginys

Būklė: naujas, Gamybos metai: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min/Max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointing unit Ijdpjg Tu Rkefx Agfstd Corner rounding unit, radius R = 2 mm Quick-change device for corner rounding unit Radius changeover motor EF R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spray Nesting Pneumatic 3-point adjustment Multi-function cutter (R2/R1/chamfer) Equipment for short workpieces

Būklė: labai geros būklės (naudotas), Hebrock K36 Airtronic Edgebander – used – Features: - PC control with display - Touchscreen - Swiveling operator panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Motorized adjustable infeed fence - Diamond jointing cutters for both climb and conventional milling - Quick-heating glue pot - Glue pot quick-change system - Suitable for use with PUR adhesives - Cross-cut saw with HF motor - Flush milling unit - Flush/Radius/Chamfer milling unit - Pneumatic switching of milling units - Multi milling tool - Multi radius scraper - Chip collection box for radius scraper - Air nozzle at radius scraper - Surface scraper - Air nozzle at surface scraper - Interchangeable motor for corner rounding - Spray unit for separating agent - Spray unit for cleaning agent - Spray unit for antistatic coolant - Spray unit for lubricant - LED lighting in machine area - Interchangeable glue pots - Zero-joint Airtronic System ----- Technical Data ----- - Edge thickness (coil): 0.5-3 mm - Max. edge thickness for corner rounding: 3 mm - Workpiece thickness: 8-60 mm - Workpiece thickness for corner rounding: 45 mm - Min. workpiece length: 200 mm Itedpfx Ageymyp Rsfsd - Feed speed: 7-10 m/min - Support plate diameter for edging material: 850 mm - Guillotine for coil edges up to: 3 mm - Jointing cutter power: 2x2.2 kW - Cross-cut saw power: 0.37 kW - Milling station power: 2x0.37 kW - Corner rounding unit power: 0.37 kW - Buffing unit power: 2x0.18 kW - Extraction port Ø for jointing unit: 60 mm - Compressed air connection: 7 bar - Total length: 5,540 mm - Dimensions (LxWxH): 5,540 x 1,210 x 1,450 mm - Weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate operation

Būklė: naudotas, Gamybos metai: 2011, pneumatinis frezavimo nustatymas (tiesus/radiusas) Kombinuota frezavimo stotis R=2 Kampų apvalinimo freza R=2 iki 40 mm Sujungimo freza iki 40 mm Plokščias grandiklis Profilinis grandiklis R=2 trumpoms detalėms Valdymas SPS su Pro Face jutikliniu ekranu Nestingas Aušinimo/antistatika purškimas - airtronic Apsauginis briaunos purškimas Riepe su keičiamu rezervuaru Ruošinio storis: 8–60 mm Mechaninis briaunų spaudimas Ištraukimo jungtis: 140 mm Matmenys: Ilgis su išsikišimu: 4984 mm Gylis su ritininiu stalu: 1425 mm Maks. aukštis: 1618 mm Darbo stalo aukštis: 888 mm Svoris: 1400 kg Iodpfxjxyiile Agfstd Sandėliavimo vieta: Nattheim

Būklė: naudotas, Gamybos metai: 2025, New demonstration machine! List price €60,140 net Edge banding machine #F5/00/11 with PLC control (including touchscreen) and hot-melt adhesive application to the workpiece for edge material up to 3 mm: jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change pot system, including glue discharge device, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and indexable insert cutter (combi version), corner rounding unit, radius scraper, flat scraper (including pneumatic lift), cleaning unit, robust chain drive, ball-bearing double roller top pressure, inspection window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Additional options: F5/08/4 quick-change system for corner rounding unit F5/08/5 additional replacement motor for corner rounding unit with tool assembly F5/09/4 multi-radius scraper (R2/R1) F5/10 chassis F5/14 additional replacement glue pot F5/24/1 separating agent spray unit F5/24/2 cleaning agent spray unit F5/30 pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 jointing up to 50 mm workpiece thickness ²) F5/32 LED interior lighting 1) Max. jointing thickness 1 mm for special materials such as multiplex 2) Max. jointing thickness 1 mm for 40-50 mm workpiece thickness Storage location: Rieth Itodjym Dvbepfx Agfsd

Būklė: naudotas, Gamybos metai: 1992, Naudota mašina Pagaminimo metai: 1992 Didžiausias ruošinio aukštis apie 40 mm Mažiausias ruošinio ilgis apie 250 mm Mažiausias ruošinio plotis apie 70 mm Padavimo greitis apie 11 m/min Paruošimo darbui laikas apie 4-5 min Galingumas apie 11 kW Su greito pašildymo klijų talpa Pneumatinis kraštų nupjovimas iki 3 mm Iedpfxjx Rr Dve Agfjtd Su pjūklu iki 5 mm krašto storio Su frezavimo stotimi, pagal pageidavimą komplektuojama su kombinuotais pasukamais frezavimo peiliais spindulio, tiesiam ir įstrižam frezavimui Išlenkiama ir priekin ištraukiama konsolė Su važiuokle I x P x A 3600 x 1400 x 1200 mm Svoris apie 670 kg Disponavimas: iš karto Vieta: Flörsheim

Būklė: naujas, Edge thickness: up to 3 mm Total length: 4122 mm Iodpfjvwd Uusx Agfstd Feed speed: 10 m/min with PLC control (including touchscreen) and hot melt glue monitoring at the workpiece for edge material up to 3 mm Jointing cutter (including DIA tooling) up to 2 mm milling depth1), maintenance-free glue pot with quick-change feature chip/scrap removal unit, HF (high-frequency) cut-off saw station (approx. 12,000 rpm), HF (high-frequency) milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable insert cutter (combination design), corner rounding milling unit, surface scraper (including pneumatic lift), spare station (for cleaning unit or radius scraper), robust chain drive, double roller top pressure with ball bearings, inspection window at rear of machine, extendable workpiece support, approx. 10 m/min feed. Item No. F4/00/11 - Jointing Head Whispercut F4/500/10 - Combination Milling Head F4/500/20 - Radius Milling Head R=2mm F4/500/2 - Radius Corner Milling Head R=2mm F4/08/2 - Quick-change Corner Milling Unit F4/08/4 - Radius Scraper (incl. pneumatic lift) F4/09 - Radius Scraper R=2mm F4/09/2 - Chassis F4/10 - Pneumatic 3-point adjustment (for radius, chamfer, flush milling) F4/30

Būklė: naudotas, Gamybos metai: 1994, for pre-coated edges including a large quantity of edge material with double-sided extension arms end cap station 3-roller feed used, good condition Manufacturer: Hebrock Model: AKV-83 Year of manufacture: 1994 Iedjvwfzvepfx Agfstd Edge band thickness: 1.0 mm Maximum workpiece height: 50 mm Minimum workpiece width: 50 mm Minimum workpiece length: 170 mm Required space: approx. 1700 mm x 690 mm x 500 mm Location: 97447 Gerolzhofen, free loaded on truck, unpacked Delivery in as-inspected condition, without guarantee or warranty