Saugos Lange pirkti naudotą (5 234)

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base sections, 1,000 mm useful depth - 12 cantilever arms, each with 1,000 mm useful depth, standard version - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available and extensions possible at any time) - (*Larger quantities available: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg Hodpfx Afjmhhyas Iofb - Base section and cantilever arms each with 1,000 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 boltable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total rack length: 4,000 mm - Fastening material included (without floor anchors) - Comes with assembly instructions and C4 load capacity labels according to DIN standards - Expert technical support by phone - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical manner to enable easy unloading. If installed outdoors, load capacities are reduced due to wind and snow loads. The installation surface must be concrete, level, suitable for anchoring, and able to withstand the imposed loads. The client is responsible for verifying and ensuring ground condition, load-bearing capacity, and any necessary official permits. Rack uprights must be anchored to the floor on-site; wall anchoring is neither required nor recommended. According to trade association guidelines, the uprights of the rack should have a minimum overhang of 500 mm above the highest storage level.

Sąlyga: naujas, bendras svoris: 3 500 kg, ašių konfigūracija: 2 ašys, krovimo vietos ilgis: 3 200 mm, krovinių skyriaus plotis: 1 700 mm,

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm, with base section, 1,200 mm useful depth - 12 cantilever arms, standard, 1,200 mm useful depth - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts re-orderable and expansion possible at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface: hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length: 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical way to enable easy unloading. When installed outdoors, the stated load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, and suitable for anchor bolts, and must be able to bear the applied loads. The floor structure, load-bearing capacity, and any necessary official approvals must be checked and provided by the customer. Hfjdpfx Ajmhhx Isf Iob The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German statutory accident insurance (BG) guidelines, it is recommended that the racking uprights have at least 500 mm of clearance above the top storage level.

Sąlyga: naujas, bendras svoris: 2 700 kg, ašių konfigūracija: 2 ašys, krovimo vietos ilgis: 2 800 mm, krovinių skyriaus plotis: 1 300 mm,

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) Hjdpfx Ajmhh Anof Isfb - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Sąlyga: naujas, bendras svoris: 3 500 kg, ašių konfigūracija: 2 ašys, krovimo vietos ilgis: 3 100 mm, krovinių skyriaus plotis: 1 700 mm, Gamybos metai: 2023,

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: Hsdpsmhh Dzsfx Af Ijfb - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Professional telephone support - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever racking system in painted finish (RAL 7016 Anthracite): Hfedpsmidyfefx Af Iob Scope of delivery: - 4 upright frames, height 4,200 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm bay distance (4,000 mm racking length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered, and extension is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Enzian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Per upright: 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per arm: 730 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - Supplied with assembly instructions and load capacity labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Local pickup available Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is well packaged for easy unloading. Delivery can take place approximately 1–2 weeks after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be made of concrete, level, suitable for doweling, and able to bear the applied loads. The floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional liability association guidelines, it is recommended that the uprights have at least 500 mm of clearance above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Bolted system in hot-dip galvanized version: Ex works price: Robust steel construction made from IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright fitted with 3 bolt-on cantilever arms, usable depth 1,200 mm, standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Hsdpfx Afemhhl He Ijfb Including mounting material (without floor anchors) Complete with assembly instructions and C4 load capacity signs according to DIN standard

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. Hsdpfx Afomhhype Iefb We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Sąlyga: geras (naudotas), Saugos valdymas, saugos relės, standartinis pagrindinis įrenginys Hfedpox T A Nbsfx Af Ieb - Gamintojas: REER, standartinis pagrindinis įrenginys, 8 įėjimai, 2 OSSD poros (SIL 3) - Tipas: MOSAIC M1 .: 8040430 - Kiekis: 1 vnt. relė yra - Matmenys: 110/25/H115 mm - Svoris: 0,2 kg

Sąlyga: naudotas, rida: 260 000 km, galia: 80 kW (108,77 AG), pirmoji registracija: 02/2015, kuro tipas: dyzelinas, bendras svoris: 3 500 kg, spalva: žalia, pavaros tipas: mechaninis, emisijos klasė: Euro 5, sėdimų vietų skaičius: 3, bendras ilgis: 6 000 mm, krovimo vietos ilgis: 3 300 mm, Įranga: ABS, centrinis užraktas, suodžių filtras,

Sąlyga: geras (naudotas), Extension for square drive, square drive extension, tap extension, die extension - Square drive extension: tap extension, die extension - Square size: 32 x 32 mm - Total length: 285 mm Hfedpewu Rnbefx Af Ijb - Quantity: 2 extensions available - Price: per piece - Dimensions: Ø55 x 285 mm - Weight: 3.1 kg/pc.

Sąlyga: geras (naudotas), forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1800 mm -Cross-section: 200 x 60 mm -Mounting: see photos -Transport dimensions: 2060/1080/H200 mm -Total weight: 487 kg Hsdpswn D Eyjfx Af Iofb

Sąlyga: geras (naudotas), Saugos relė, saugumo valdiklis, avarinio stabdymo įrenginys -Gamintojas: Moeller, saugos relė -Tipas: ESR4-NV3-30 -Kiekis: yra 1 relė Hodskia S Ejpfx Af Ijfb -Matmenys: 95/25/H115 mm -Svoris: 0,2 kg

Sąlyga: geras (naudotas), Šakinio krautuvo kaušas, hidraulinis šakinio krautuvo kaušas, lengvų medžiagų kaušas, savivartis kaušas, konteinerio vertimo įrenginys, šakės, krautuvo šakės, šakinių šakių kaušai - Šakės: 2 vnt./1 pora - Ilgis: 920 mm - Skerspjūvis: 125 x 40 mm Hfedpfxegnzxfo Af Ieb - Tvirtinimas: žr. techninę brėžinį nuotraukose - Išmatavimai: 1070/600/H125 mm - Svoris: 136 kg

Sąlyga: geras (naudotas), Safety relay, safety controller, emergency stop switch device, switchgear, safety sensor, safety switching device, evaluation unit - Manufacturer: Pilz, safety relay/safety switching device removed from Scherer VDZ 80 DS vertical turning machine - Model: PNOZ XV3.1 30/24VDC 3NO 1NC 2NO1 Ref. no.: 774530 102997 Hedjvun Itjpfx Af Iofb - Quantity: 1 relay available - Dimensions: 90/90/H120 mm - Weight: 0.6 kg

Sąlyga: labai geros būklės (naudotas), Pakabinama spaustuvė, bėgio laikiklis, bėgis, slankiojimo bėgis, bėgio laikiklis, spaudimo mova, stumdomų vartų mova -Gamintojas: Helm, slankiojimo bėgis -Tipas: Profilis 500 Hfedpjv R Tdrefx Af Iob -Ilgis: 250 mm -Išmatavimai: žr. nuotraukas -Kiekis: yra 122 vnt. bėgių -Kaina: už vnt. -Minimalus užsakymo kiekis: 2 vnt. -Matmenys: 250/65/H60 mm -Svoris: 1,3 kg/vnt.

Sąlyga: geras (naudotas), Transporteris, juostinis transporteris, transportavimo juosta, juostinis konvejeris, plokščiasis juostinis transporteris, transporterio juosta su vakuumo jungtimi Hfedpfexu Ehyjx Af Ijb - Juostinis transporteris: vakuuminė dalinė zona skirta transportuojamai medžiagai prisiurbti - Transportavimo juostos: 3 vnt., ilgis 1840 x 30 mm - Pavaros velenas: Ø 30 x 100 mm - Atskiros dalys: žiūrėti nuotraukas - Matmenys: 1840/570/H285 mm - Svoris: 129 kg

Sąlyga: geras (naudotas), Prikabinami laikikliai, standartiniai laikikliai ir priedai, SASSEX spiraliniai grąžtų peiliai, Sassex spiraliniai grąžtų peiliai, išgręžimo peiliai, Sassex išgręžtuvai, Sassex laikikliai, įrankių laikikliai, grąžtų peilių tvirtinimas, spiraliniai grąžtai Hfjdpsuhr N Aofx Af Iob -Prikabinamas laikiklis: Įrankių laikiklis, 2 vnt. -Tvirtinimas: MK5 -Ilgis: 450 mm -Išmatavimai: žiūrėti nuotraukas -Pardavimas/kaina: komplektas -Išmatavimai: 450/100/H45 mm -Svoris: 6,3 kg

Sąlyga: geras (naudotas), keltuvas kaušas, hidraulinis krautuvo kaušas, lengvų medžiagų kaušas, verstukas, konteinerių vartymo įrenginys, krautuvo šakės, šakinės, šakės šakių keltuvams -Krautuvo šakės: 2 vnt. / 1 pora -Ilgis: 1190 mm Hfjdpfx Aspm Thdsf Isb -Skerspjūvis: 150 x 65 mm -Įtvirtinimo vieta: 600 mm (žr. brėžinį nuotraukose) -Transportavimo matmenys: 1430/910/H190 mm -Svoris: 280 kg

Sąlyga: geras (naudotas), Length stop, longitudinal stop, saw stop, material stop, motorized length stop, controlled length stop - Length stop: for various processing options - Max. stop length: 2970 mm - Individual components: see photos - Accessories: incl. Haubold stapler - Dimensions: 3550/760/H1200 mm - Weight: 396 kg Hsdpfx Afehablao Iofb

Sąlyga: geras (naudotas), Roller conveyor, conveyor track, roller conveyor belt, roller track, saw roller block, saw roller stand, saw bench, saw roller conveyor, longitudinal stop, length stop, saw stop, material stop, motorized length stop, controlled length stop, roller conveyor, conveyor track, roller conveyor belt, roller track -Length stop for: saws -with: manual lengthwise stop -with: side stop adjustable via hydraulic motor in crosswise direction -Display via: SIKO mechanical position indicator -Roller conveyor: Ø 80 x 1340 mm -Max. stop length: 2950 mm -Roller pitch: 300 mm -Dimensions: 3000/1640/H940 mm -Weight: 534 kg Hsdpfx Aed D R Syjf Ijfb

Sąlyga: geras (naudotas), Safety relay, safety controller, emergency stop device -Manufacturer: Pilz -Type: PNOZ X3 -Quantity: 8 units available -Price: per piece Hfsdscc Hvfjpfx Af Ijb -Dimensions: 45/85/H120 mm -Weight: 0.37 kg

Sąlyga: geras (naudotas), Suspension clamp, rail bracket, rail, running track, track holder, clamping sleeve, sliding gate sleeve Hfedpfx Afswmq H Ie Ijb - Manufacturer: Helm, curved running track, with clamp - Type: Width 105 mm - Length: 1600 mm - Dimensions: see photos - Quantity: 1x curved running track available - Transport dimensions: 1600/473/H134 mm - Weight: 38 kg