Saugos Lange pirkti naudotą (4 076)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth Hjdpfxsmhhf Sj Af Djff - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Bolted system in hot-dip galvanized version: Ex works price: Robust steel construction made from IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Hedpsmhhl Hsfx Af Doff Base section with 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright fitted with 3 bolt-on cantilever arms, usable depth 1,200 mm, standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Including mounting material (without floor anchors) Complete with assembly instructions and C4 load capacity signs according to DIN standard

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector Hedpfemhhy Nsx Af Deff = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever racking system in painted finish (RAL 7016 Anthracite): Scope of delivery: Hfsdpfx Asmidyfef Dsf - 4 upright frames, height 4,200 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm bay distance (4,000 mm racking length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered, and extension is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Enzian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Per upright: 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per arm: 730 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - Supplied with assembly instructions and load capacity labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Local pickup available Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is well packaged for easy unloading. Delivery can take place approximately 1–2 weeks after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be made of concrete, level, suitable for doweling, and able to bear the applied loads. The floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional liability association guidelines, it is recommended that the uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking Used: Hot-dip Galvanised Bolted System Scope of Delivery: - 4 double-sided uprights, height 3,500 mm, each with 1,200 mm base plates - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre-to-centre distance - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) Hfsdpomkixwjfx Af Dof - (*Also available in larger quantities: 20 uprights in stock) Detailed Description: - Robust steel construction made of IPE sections - Surface of all components hot-dip galvanised - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, each with 1,200 mm depth, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. The material is properly packaged to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, suitable for dowelling, and able to absorb the applied loads. Floor structure and load-bearing capacity, as well as any necessary official approvals, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Hsdpfjguk Dvex Af Djff Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright. Hfodpfx Aoqt Dmysf Djf

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) Hfedpomhh Dtefx Af Dof - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Būklė: naudotas, tuščias svoris: 2 980 kg, didžiausias leistinas svoris: 15 020 kg, bendras svoris: 18 000 kg, ašių konfigūracija: 2 ašys, pirmoji registracija: 03/2011, pakaba: oras, padangos dydis: 235/75R17,5,

Būklė: naujas, Gamybos metai: 2026, max. workpiece length 4,400 mm Milling spindle: 1 unit Main motor: 19.2 kW Control system: Beckhoff CNC machining center MASTERWOOD 4 WIN ----- Specifically designed for efficient and flexible production of wooden windows and doors. HIGHLIGHTS: - Various tool magazines for optimal tool setup - Simultaneous loading of 4 workpieces - Patented clamping system for optimum processing results - CNC-controlled worktable with automatic positioning of beams and clamps - Automatic reclamping for quick changing between exterior and interior profiling - INTEGRATED window manufacturing software, i.e., the machine does not require (but can, if desired) external industry software to be controlled from the office - Powerful 19.2 kW HSK-63 E motor Please note that this stock machine is located at our facility in Oberkochen and already comes equipped with many useful options. Hodpfeyyqm Usx Af Doff Short-term delivery of tools available on request! Request a quote and see for yourself the unbeatable price-performance ratio! VIDEO of the machine available upon request! You will find the technical description of the machine as a PDF document attached. We would also be happy to accept your used machine as a trade-in at a fair price! Matching stationary or mobile extraction systems available on request! (e.g., #5674 NESTRO NE 300) Suitable compressor available on request! (#5997 Kaeser Aircenter SM 15) (Technical data as per manufacturer – subject to change and without liability!)

Būklė: naudotas, rida: 352 km, galia: 110 kW (149,56 AG), pirmoji registracija: 04/2026, kuro tipas: dyzelinas, bendras svoris: 3 500 kg, kita apžiūra (TÜV): 04/2028, spalva: balta, pavaros tipas: automatinis, sėdimų vietų skaičius: 3, krovimo vietos ilgis: 4 300 mm, krovinių skyriaus plotis: 2 100 mm, krovos erdvės aukštis: 400 mm, Įranga: ABS, centrinis užraktas, elektroninė stabilumo programa (ESP), oro kondicionavimas,

Būklė: naudotas, rida: 352 km, galia: 110 kW (149,56 AG), pirmoji registracija: 04/2026, kuro tipas: dyzelinas, bendras svoris: 3 500 kg, kita apžiūra (TÜV): 04/2028, spalva: balta, pavaros tipas: automatinis, sėdimų vietų skaičius: 3, krovimo vietos ilgis: 4 300 mm, krovinių skyriaus plotis: 2 100 mm, krovos erdvės aukštis: 400 mm, Įranga: ABS, centrinis užraktas, elektroninė stabilumo programa (ESP), oro kondicionavimas,

Būklė: naudotas, Gamybos metai: 2006, mašinos/transporto priemonės numeris: 105554, We are offering this used Weinig Conturex window production line, year of manufacture 2006. Machine number: 105554 Machine type: Conturex Year of manufacture: 2006 Circuit diagram number: FP 3013 Supply voltage: 3×400 V Supply frequency: 50 Hz Control voltage: 230 V Control frequency: 50 Hz Control voltage: 24 V Control frequency: 0 Hz Main fuse: 139 A Current capacity: 160 A Power: 61 kW For any questions or if you require additional information, please send us a message or contact us by phone. CNC machining centre for processing wooden profiles (windows, doors, etc.). Additional linear tool magazine (120 positions). Two 4-axis machining heads for simultaneous operation (20kW). Automatic loading and unloading tables. Optionally, a comprehensive tool package is available for purchase (tool holders, angle heads, profile cutter heads). The machine is currently in continuous use. The machine was purchased in 2024 after thorough overhaul. Since then it has worked 15 months on a single shift basis. Technical data: Working range: Minimum width: 25 mm Maximum width: 260 mm Minimum height: 10 mm Maximum height: 150 mm Minimum length: 180 mm Maximum length: 4500 mm The maximum working length is achieved by multiple repositioning of the workpiece in the clamp. Milling spindle no. 1: Number of axes: 4 Motor power S1: 20 kW Spindle speed range: 0 – 18,000 rpm Rotation direction: right / left C-axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450°/s Auxiliary magazine for milling spindle no. 1: - magazine type: disc - magazine capacity: 18 tools - holder spacing: 100 mm - max tool weight: 10 kg - max total tool weight: 130 kg - tool holder type: HSK F 63 Hfedpfx Aoyu Sn Ujf Dof Milling spindle no. 2: Motor power S1: 20 kW Spindle speed range: 0 – 18,000 rpm Rotation direction: right / left C-axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450°/s Auxiliary magazine for milling spindle no. 2: - magazine type: disc - magazine capacity: 18 tools - holder spacing: 100 mm - max tool weight: 10 kg - max total tool weight: 130 kg - tool holder type: HSK F 63 External magazine: - magazine type: linear - magazine capacity: 120 tools - holder spacing: 80 mm - tool holder type: HSK F 63 Loading table: transverse, automatic Unloading table: transverse, automatic CNC control: PLC control: Siemens S7 Mobile control panel Controller computer: - operating system: Microsoft Windows - modem for data transfer and diagnostics - touchscreen display Siemens Sinumerik 840 D Number of axes: 4 The machine is fully operational and currently in continuous production. For an additional fee, a comprehensive package of accessories is available: 8 angle heads, a set of 3 standard holders, a set of 17 new arbors for cutter heads.

Būklė: geras (naudotas), Saugos relė, saugos valdiklis, avarinio sustabdymo jungiklis, jungimo įrenginys, įtampos kritimo relė, saugos jungimo įrenginys -Gamintojas: Schmersal, saugos relė, saugos jungimo įrenginys nenaudotas, originalioje pakuotėje -Tipas: SRB 301LC/B-R -Kiekis: Yra 25 vnt. relių -Kaina: už vienetą -Matmenys: 120/25/H100 mm Hfsdpsmkm Nrofx Af Def -Svoris: 0,2 kg/vnt.

Būklė: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, SAUGOS ŠVIESOS UŽUOLAIDA C4000 BASIC rinkinys, siųstuvas ir imtuvas NOS SICK: C40E-1501BH030; UŽSAKYMO NR.: 1022248 SICK: C40S-1501AA030; Užsakymo nr.: 1022212 IMTUVAS; Raiška: 14 mm; Aukštis: 1500 mm Hfjdpfxsxnpqxs Af Def

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Suvirinimo aparatas: FUSION 4H Skydo iškrovimo blokas Pirmasis frezavimo modulis Q-MATIC 1 Nuoseklusis ryšys tarp suvirinimo aparato ir valymo įrenginio Sukamasis stalas Hedpfsxzzxbex Af Deff Valymo įrenginys (antrasis modelis) TRIMMER 4A Ištraukimo stalas Antrasis frezavimo modulis (INTEGRA Q2) Q-MATIC 2 Gamybos linijos prižiūrėtojo nešiojamas kompiuteris

Būklė: naudotas, rida: 16 225 km, galia: 129 kW (175,39 AG), pirmoji registracija: 09/1993, bendras svoris: 9 500 kg, kuro tipas: dyzelinas, spalva: mėlyna, ašių konfigūracija: 2 ašys, pavaros tipas: mechaninis, krovinių skyriaus plotis: 2 400 mm, krovimo vietos ilgis: 3 000 mm, krovos erdvės aukštis: 1 650 mm, bendras plotis: 2 500 mm, bendras aukštis: 2 850 mm, Įranga: ABS, autonominis šildytuvas, kompresorius, visų varančiųjų ratų pavara,

Būklė: naudotas, rida: 19 604 km, galia: 129 kW (175,39 AG), pirmoji registracija: 11/1993, bendras svoris: 7 490 kg, kuro tipas: dyzelinas, spalva: mėlyna, pavaros tipas: mechaninis, krovinių skyriaus plotis: 2 400 mm, krovimo vietos ilgis: 3 000 mm, krovos erdvės aukštis: 1 600 mm, bendras ilgis: 6 850 mm, bendras plotis: 2 470 mm, bendras aukštis: 2 750 mm, Įranga: ABS, autonominis šildytuvas, visų varančiųjų ratų pavara,

Gamybos metai: 2011, būklė: paruoštas naudoti (naudotas), bendras svoris: 700 kg, bendras plotis: 1 500 mm, bendras aukštis: 1 800 mm, gaminio ilgis (maks.): 2 800 mm, 2011 m. pagaminta ruošinių tvarkymo sistema. Šios "LANG Eco-Tower + Lang Eco-Feed" sistemos bendras aukštis yra 3192 mm, o jos keliamoji galia - ne mažesnė kaip 750 kg. Bokšto "Eco-Tower" matmenys yra 280 x 150 x 180 cm, o "Eco-Feed" - 250 x 70 x 130 cm. Jei norite gauti aukštos kokybės krovos galimybes, apsvarstykite mūsų parduodamą LANG Eco-Tower + Lang Eco-Feed sistemą. Susisiekite su mumis dėl išsamesnės informacijos. • "Eco-Tower" • Versija: 3.5 Windungen (3.5 vijų) • Bendras aukštis (sumontuotas): 3192 mm (esant TH=1000) • Darbinė temperatūra: nuo -25 °C iki +55 °C • Keliamoji galia (reikalingas kėlimo mechanizmas): min. 750 kg Papildoma įranga • Eco-Feed • Svoris: 400-450 kg • Matmenys (D x Š x V): 250 x 70 x 130 cm • Darbinė temperatūra: nuo -25 °C iki +55 °C Hodpjyynfusfx Af Doff • Į komplektą įeina 50 vnt. spaustuvų

Būklė: naudotas, rida: 109 000 km, galia: 110 kW (149,56 AG), pirmoji registracija: 08/2019, kuro tipas: dyzelinas, bendras svoris: 3 500 kg, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, sėdimų vietų skaičius: 2, krovimo vietos ilgis: 4 200 mm, krovinių skyriaus plotis: 2 060 mm, krovos erdvės aukštis: 2 300 mm, Įranga: ABS, centrinis užraktas, navigacijos sistema, oro kondicionavimas, suodžių filtras,

Būklė: labai geros būklės (naudotas), Aliumininė aikštelės kopėčios su trimis platformos turėklais, su kelių ir kojų atraminėmis juostomis Platformos gylis: 800 mm Platformos plotis: 600 mm Pakopos gylis: 80 mm Rėmo medžiaga: aliuminis Judinama, ratukų skersmuo: 100 mm Ratukų komplektacija: 2 fiksuoti ratukai Platformos aukštis: 1660 mm Įskaičiuota su platforma: 7 pakopos Visas statymo aukštis: 166 cm platforma + 110 cm turėklai Svoris: 40 kg Plotis: 1510 mm Gylis: 1510 mm Hedpeyn Ertefx Af Deff Priedai: 2 porankiai Pristatymas: išrinkta, įmanoma. Yra surinkimo instrukcija.

Būklė: naudotas, Gamybos metai: 2000, Sandėlio vieta: Nattheim Hfodpjvwdmwjfx Af Dsf

Būklė: geras (naudotas), Saugos relė, saugos valdiklis, žemos įtampos relė, jungimo įrenginys, servopavara, maitinimo modulis, valdymas, keitiklis, kontroleris, servomodulis, ašies stiprintuvas, nuolatinės srovės keitiklis, dažnio keitiklis, valdymo modulis, saugos valdiklis - Gamintojas: Reis Robotics, saugos valdiklis (Safety Controller) - Tipas: SCR2 Hfjdsmch Uxspfx Af Djf .: 3522448 - Darbinė įtampa: 24 V DC - Kiekis: yra 2 vnt. saugos valdiklių - Kaina: už vienetą - Matmenys: 385/210/A80 mm - Svoris: 2,1 kg/vnt.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2012, Kampinių detalių apdirbimo įrenginys Hfodpfx Aoxn T Smof Dof

Būklė: naudotas, Gamybos metai: 2009, max. workpiece length 4500 mm Milling spindle: 1 unit Main motor: 20 kW Control system: Siemens Weinig Conturex 2 C 114 ----- Working width: 40–260 mm Working height: 25–110 mm 2 x PowerGrip clamping tables, each 2280 mm ----- Workpiece length: 200 – 4,500 mm Machining of workpieces longer than 2,700 mm is carried out using a shuttle cycle. Main spindle 1: ----- Motor with brake, 20 kW HSK 63F Hfsdpswunwyofx Af Def Electronically adjustable speed: 2,000–18,000 rpm Maximum tool length from HSK 63 F reference surface: 290 mm With C-axis Tool magazine: ----- Number of slots: 30 Slot spacing: 100 mm Multi-spindle boring unit permanently installed ----- for horizontal and vertical drilling and milling without tool change ----- Price ex location Prices for Dismantling and loading onto customer truck Transport within Germany and abroad, reassembly, commissioning, and if required, new profiles available on request! Including used tools (drawings available on request!): ----- Wood: IV 68, 78, 88 inward and outward opening, with fitted drip rail Wood-aluminium: IV 68/68, 78/78, 87/68, 97/78 Lift/slide doors IV 68 and 78 Entrance doors IV 68 and 78 Pivoting windows Corner joint: counter/dowel Technical data as per manufacturer – without guarantee! Detailed technical description available on request!