Sunkiasvorė lentyna

Kragarmregal einseitig Höhe: 2.600 mm Nutztiefe: 1.000 mm / Länge: 4.000 mm

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base sections, 1,000 mm useful depth - 12 cantilever arms, each with 1,000 mm useful depth, standard version - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available and extensions possible at any time) - (*Larger quantities available: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms each with 1,000 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 boltable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing Cedpfxomhhyaj An Horc - Total rack length: 4,000 mm - Fastening material included (without floor anchors) - Comes with assembly instructions and C4 load capacity labels according to DIN standards - Expert technical support by phone - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical manner to enable easy unloading. If installed outdoors, load capacities are reduced due to wind and snow loads. The installation surface must be concrete, level, suitable for anchoring, and able to withstand the imposed loads. The client is responsible for verifying and ensuring ground condition, load-bearing capacity, and any necessary official permits. Rack uprights must be anchored to the floor on-site; wall anchoring is neither required nor recommended. According to trade association guidelines, the uprights of the rack should have a minimum overhang of 500 mm above the highest storage level.

Būklė: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, plieno lakšto storis (maks.): 3 mm, bendras svoris: 15 000 kg, įėjimo įtampa: 400 V, Lenkimo kampas (maks.): 180 °, darbinis ilgis: 3 200 mm, darbo diapazonas: 3 200 mm, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, Technical specifications: Year: 2013 Working length: 3,200 mm Cjdpfx Aowq Rumjn Horc Maximum sheet thickness (mild steel 400 N/mm²): 3.00 mm Maximum sheet thickness (stainless steel): 2.00 mm Maximum sheet thickness (aluminium): 4.00 mm Maximum bending height on four sides: 250 mm Upper beam stroke: 650 mm

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Laiptų frezavimo staklės laiptų ir pakopų įstatymui į vangas ir stulpus. Staklės aprūpintos aukšto dažnio frezavimo varikliu. Staklės visiškai naujos. 400 V, 50 Hz. Credsyxzacopfx An Hoc

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Our horizontal form-fill-seal machine from the DEAPHS series is specifically designed for filling 3- and 4-side sealed sachet and doypack pouches. Thanks to various dosing systems, including the auger filler, volumetric cup filler, and multihead weigher, the machine reliably packs powdery, liquid, and granular products. The machine also independently produces the pouches to be filled from flat film, offering a cost-effective and efficient packaging solution. The modular design of the form-fill-seal machine enables quick and easy changeovers and expansions. ✅ Ideally suited for foodstuffs, pet food, pharmaceutical products, cosmetics, and other non-food items. ✅ Perfect for filling small product quantities and samples, such as with our mini pouches. ✅ Optional accessories available, such as volumetric cup filling system, multihead combination scale, piston filler, and Hibar pump filler. ✅ Matching packaging material (pouches & film) also available from us. Independent film unwind shaft: Ensures precise control of film tension, allows flexible adjustment to film roll width and pouch specifications, and enables superior doypack pouch forming. Configuration: - Film unwind shaft - Pouch bottom sealing unit Codpjum R Ezofx An Horc - Pouch bottom forming unit - Three horizontal sealing stations - Two vertical sealing stations - Servo-driven pouch draw-off - Mechanical pouch cutting - Vacuum pouch opener - Photoelectric cell control - LCD touchscreen display - PLC – Panasonic - Servo-controlled film feed Machine dimensions: approx. 5,500mm x 1,100mm x 1,400mm (L x W x H) Net weight: approx. 2,000kg Connected load: 380V, 3-phase, 50Hz, 6.5kW Air consumption: 0.23m³/min Main components: Mitsubishi, Panasonic, Autonics, ABB, Airtac, SMC

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. Crjdpfx Aeh Ek Daon Hsc The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Karštas vandens rezervuaras/šilumos kaupiklis iš V4A nerūdijančio plieno, vertikalus Techniniai duomenys / matmenys Turima kiekis: 1 vnt Tūris: apie 164 000 litrų Codpeqagl Hsfx An Herc Talpos tipas: sandėliavimo talpa Būklė: naudota Tinka naudoti su maisto produktais: taip Konstrukcija: vertikalus Vidinis skersmuo: apie 3 900 mm Išorinis skersmuo: apie 4 200 mm Cilindrinis aukštis: apie 13 000 mm Bendras aukštis: apie 17 220 mm Svoris: apie 10 500 kg Talinio terpės specifinis svoris: 1,0 t/m³ Darbinis slėgis: neslėginis Apvalkalo/silindro sienelės storis: apie 5,3–7 mm Tarpas nuo grindų: apie 1 800 mm Darbinė temperatūra: -10°C/+90°C Medžiagiškumas / savybės Vidinio apvalkalo medžiaga: V4A nerūdijantis plienas (1.4571) Dvigubas sluoksnis: nerūdijantis plienas Vidinis paviršius: 2B Vidinės siūlės nušlifuotos Izoliacija Yra izoliacija Izoliacijos storis: apie 100 mm Izoliacinė medžiaga: mineralinė vata Izoliacinio apvalkalo medžiaga: aliuminis Izoliacinis apvalkalas: prisuktas/kniedytas Pastabos: kūginio stogo apdaila – nerūdijantis plienas, cilindro apdaila – aliuminio trapecinės plokštės, kūgio apdaila – lygus aliuminis Įranga Pagrindo tipas: žiedinė koja / pagrindo žiedas Tvirtinimas: fiksuotas Viršus: kūginis dugnas Apačia: kūginis dugnas Viršutinė dalis: 1 x dangtis DN 200 su izoliaciniu gaubtu 1 x flanšas DN 32 suvirintas į dangtį (CIP) 1 x dangčio drenažas DN 32 1 x kabelio mova DN 50 1 x perpildymo vamzdis DN 150 2 x kėlimo kilpos Šonas: 1 x įleidimo jungtis DN 100 1 x pildymo vamzdis DN 100 4 x termometrų movos (ø 26 mm) su izoliaciniais gaubtais 1 x CIP linija DN 32 1 x tipinis žymeklis 1 x vaikščiojimo durys (apie 2 000 × 1 000 mm) 1 x išleidimo jungtis DN 100 Apačioje: 1 x besisukantis kūgis DN 450, besibaigiantis lygiaflančiame DN 100 Pastabos: visa kita pagal nuotraukas ir brėžinius Dokumentacija Brėžinys

Gamybos metai: 2025, būklė: naujas, Kreuzmayr Fruit Drying Cabinet OTS 11, 11 m² drying area, electrically heated, equipped with temperature and humidity control. Connected load 7.5 kW, full stainless steel construction. Suitable for drying fruit, vegetables, meat, etc. Crjdpob Ipxwefx An Hjc

Gamybos metai: 2025, būklė: naujas, Mobile fruit juice production unit, installed in a stainless steel swap-body container with hydraulic support legs. Comprising: large crate tipper, washing and milling unit, KEB 1000 belt press, 2 x 800-litre buffer tanks, juice pump, double gap filter, PA 2000 oil pasteuriser, and automatic Bag-in-Box filler Tec 500. Performance: up to 3,000 kg/h or 2,000 litres of juice per hour. Fully automatic system for filling Bag-in-Box pouches from roll stock or individual pouches (volume range 1.5 litres to 20 litres). Integrated heating oil tank with 600-litre capacity, refillable from the outside. Hydraulic remote control with radio transmitter for support legs and doors, foot pedal operation for lifting and lowering large crate tipper. Automatic container levelling within ±0.5% inclination. Corner tarpaulins for optimal weather protection, central water drainage via box gutter and raised floor edge. Integrated high-pressure washer and compressor. The Bag-in-Box filler is pulled out sideways from the container during operation and connected to the buffer tank. Platform height in operation approx. 250 mm. Dimensions (LxWxH): 7,500 x 2,550 x 3,000 mm Fully stainless steel frame, aluminium roof and side walls. Slip-resistant aluminium floor. Transportable by any truck or trailer suitable for swap-body transportation. Total operational weight of container approx. 8,000 kg. We manufacture this system precisely to your specifications! We are happy to advise you personally. Codocltl Eepfx An Horc Installation of other equipment and machinery also possible!

Būklė: naudotas, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total connected load: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight: approx. 2500 kg Weinig Four-side Planer Profimat 23 Window Version with glazing bead cutting or usable as grooving spindle ATS control and program management ----- Machine factory-refurbished in 2024 by Weinig. Technical Data - Summary (possibly including additional accessories – please inquire) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total connected load: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle Arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically controlled up/down > Spindle 3: left Crsdpjxpn T Uofx An Hjc > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatically controlled up/down Spindle Specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw, 2.2 kW, 6000 rpm, 40 mm diameter Further Features ----- > Glazing bead cutting or usable as a grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Combined control of right spindle and glazing bead discharge via manual selector switch at operator panel > Spindles with mechanical digital readout (Technical data according to manufacturer specification – no liability assumed!)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard Credpfx Anomhhypo Hec - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.