Konsolinis stovas

Kragarmregal einseitig Höhe: 2.600 mm Nutztiefe: 1.000 mm / Länge: 4.000 mm

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Nedemhh Dzopfx Af Hjlf - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Professional telephone support - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Our horizontal form-fill-seal machine from the DEAPHS series is specifically designed for filling 3- and 4-side sealed sachet and doypack pouches. Thanks to various dosing systems, including the auger filler, volumetric cup filler, and multihead weigher, the machine reliably packs powdery, liquid, and granular products. The machine also independently produces the pouches to be filled from flat film, offering a cost-effective and efficient packaging solution. The modular design of the form-fill-seal machine enables quick and easy changeovers and expansions. ✅ Ideally suited for foodstuffs, pet food, pharmaceutical products, cosmetics, and other non-food items. ✅ Perfect for filling small product quantities and samples, such as with our mini pouches. ✅ Optional accessories available, such as volumetric cup filling system, multihead combination scale, piston filler, and Hibar pump filler. ✅ Matching packaging material (pouches & film) also available from us. Independent film unwind shaft: Ensures precise control of film tension, allows flexible adjustment to film roll width and pouch specifications, and enables superior doypack pouch forming. Nodpfxjum R Ezj Af Hslf Configuration: - Film unwind shaft - Pouch bottom sealing unit - Pouch bottom forming unit - Three horizontal sealing stations - Two vertical sealing stations - Servo-driven pouch draw-off - Mechanical pouch cutting - Vacuum pouch opener - Photoelectric cell control - LCD touchscreen display - PLC – Panasonic - Servo-controlled film feed Machine dimensions: approx. 5,500mm x 1,100mm x 1,400mm (L x W x H) Net weight: approx. 2,000kg Connected load: 380V, 3-phase, 50Hz, 6.5kW Air consumption: 0.23m³/min Main components: Mitsubishi, Panasonic, Autonics, ABB, Airtac, SMC

Būklė: naudotas, Gamybos metai: 2007, System: Mobile sludge dewatering unit, mobile decanter centrifuge Manufacturer: Hiller Model: Solid bowl decanter centrifuge Nsdjvz Dnpopfx Af Holf Type: DP51 Machine No.: H3991 Year of manufacture: 2007 Maximum permitted bowl speed: 3400 rpm Inner diameter of bowl: approx. 505 mm Bowl material: ST52.0 Bowl wall thickness: 13.0 mm Miscellaneous: Steel swap body container with reinforced floor Accessories: Feed pump for sludge inlet, polymer dosing pump, polymer solution pump Polymer station: 2-chamber system for liquid polymers with agitator, adjustable Double-shaft paddle mixer: galvanized steel Total weight: approx. 4200 kg Purchase and rental available.

Būklė: geras (naudotas), MKT Förpressningslinje för ost i gott skick, kapacitet 12.000 liter Nlodpfxjh E Dpis Af Hjf Kontakta oss för mer information.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side Nlsdpfx Aoh Ek Dasf Hsf - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: naudotas, Gamybos metai: 2017, Apžvalga Šią alaus gamybos įrangą 2017 metais pagamino ispanų gamintojas INOX DUBRA, jos misos tūris – 25 hektolitrai. Pasiūlyme yra įvairios įrangos – nuo gamybos iki išpilstymo. Visa įranga vis dar sumontuota ir bet kada gali būti apžiūrėta bei įvertinta asmeniškai. Pristatymo apimtis - Virimo cechas | INOX DUBRA | 25 HL | Dviejų katilų virimo cechas - Plokštelinis šilumokaitis | CESPEDES | UFT34/1OO- UFT32/12 | 2015 - Šalto vandens bakas | 2 500 l - 3x izobariniai fermentavimo bakai | INOX | 2 500 l | 2020 - 3x atmosferiniai fermentavimo bakai | INDUSTRIAS CESPEDES | 1 000 l | 2014 Nledpfx Afjty Ddrs Hof - Brite bakas | INDUSTRIAS CESPEDES | 2017 - Malūnas - Vandens bakas | 1 000 l - Kompresorius - Sraigtinis siurblys - Tūrinis siurblys - Rankinė atmosferinė išpilstymo įranga - Garų generatorius

Būklė: naujas, Cutting diameter: 355 mm Nodpfx Afomhm Aqj Helf Saw band dimensions: 3770 x 34 x 1.1 mm Cutting speed: 20 - 80 m/min Cutting width: 490 x 280 mm Cutting capacity at 45° round: 290 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 60° round: 230 mm Cutting capacity at 60° square: 180 mm Connection voltage: 400 Volt Total power requirement: 2.2 kW Machine weight: approx. 0.7 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Mitre Bandsaw Semi-Automatic - Mitre cuts up to 45° left and right - Mitre cuts up to 60° right - Vice with quick-release clamp - Band tension control via pressure gauge - Electric coolant system

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: Nsdpomhhypefx Af Hslf - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Gamybos metai: 2025, būklė: naujas, Kreuzmayr Fruit Drying Cabinet OTS 11, 11 m² drying area, electrically heated, equipped with temperature and humidity control. Nledpfx Afob Ipxwo Hof Connected load 7.5 kW, full stainless steel construction. Suitable for drying fruit, vegetables, meat, etc.

Gamybos metai: 2025, būklė: naujas, Mobile fruit juice production unit, installed in a stainless steel swap-body container with hydraulic support legs. Nodpfocltl Eox Af Helf Comprising: large crate tipper, washing and milling unit, KEB 1000 belt press, 2 x 800-litre buffer tanks, juice pump, double gap filter, PA 2000 oil pasteuriser, and automatic Bag-in-Box filler Tec 500. Performance: up to 3,000 kg/h or 2,000 litres of juice per hour. Fully automatic system for filling Bag-in-Box pouches from roll stock or individual pouches (volume range 1.5 litres to 20 litres). Integrated heating oil tank with 600-litre capacity, refillable from the outside. Hydraulic remote control with radio transmitter for support legs and doors, foot pedal operation for lifting and lowering large crate tipper. Automatic container levelling within ±0.5% inclination. Corner tarpaulins for optimal weather protection, central water drainage via box gutter and raised floor edge. Integrated high-pressure washer and compressor. The Bag-in-Box filler is pulled out sideways from the container during operation and connected to the buffer tank. Platform height in operation approx. 250 mm. Dimensions (LxWxH): 7,500 x 2,550 x 3,000 mm Fully stainless steel frame, aluminium roof and side walls. Slip-resistant aluminium floor. Transportable by any truck or trailer suitable for swap-body transportation. Total operational weight of container approx. 8,000 kg. We manufacture this system precisely to your specifications! We are happy to advise you personally. Installation of other equipment and machinery also possible!