Sunkiasvorė lentyna

Kragarmregal einseitig Höhe: 3.000 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm, with base section, 1,200 mm useful depth - 12 cantilever arms, standard, 1,200 mm useful depth - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts re-orderable and expansion possible at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface: hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length: 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical way to enable easy unloading. When installed outdoors, the stated load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, and suitable for anchor bolts, and must be able to bear the applied loads. The floor structure, load-bearing capacity, and any necessary official approvals must be checked and provided by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German statutory accident insurance (BG) guidelines, it is recommended that the racking uprights have at least 500 mm of clearance above the top storage level. Kodpfx Ajmhhx Iegfsdi

Būklė: labai geros būklės (naudotas), Belt Sanding Machine LANGZAUNER Type LZG Approx. sanding table dimensions: 2500 x 800 mm Approx. sanding belt dimensions: 6800 x 150 mm Motor power approx.: 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Belt reversible for right/left rotation Sanding belt cover on top Work area with light bar CE compliant Includes special sanding shoe Includes extraction fan NEW GRAPHITE CLOTH Note on used machinery: • Technical data and intermediate sale subject to error and change. • Prices quoted are ex-works—free loaded! • All machines have been cleaned and function-tested. Kodpeuxnyusfx Agfjdi • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Būklė: naujas, Step-by-Step Painting Systems Kdjdpfxsdy Dw Ae Agfei Elboy Industrial Solutions designs and manufactures a wide range of paint shops tailored to your product requirements. With ELBOY, you can navigate your facility in virtual reality during the design phase, allowing you to make desired modifications before final construction, thereby avoiding unexpected outcomes. We provide design and manufacturing services for your application, with a focus on environmental protection and occupational safety for processes such as sandblasting, filling, washing, priming, and top coating - suitable for all product sizes. Step-by-Step systems are equipped with overhead or floor conveyors and can be configured for products of all dimensions. Cabins for sandblasting, chemical washing, pre-coating, drying, filling, top coating, and curing can be seamlessly integrated into the system. Each process step, predefined by the system, is executed in sequence: once the set time elapses, automatic doors open and the product moves automatically to the next processing line. These fully automated systems are managed via a 15-inch touchscreen, offering various reporting options such as main computer monitoring, product reporting, and outcome reporting as needed, including remote control capability. These paint shops are designed and built by our engineers in close alignment with your capacity, application areas, and specific requirements. For applications involving electrostatic powder coating or wet painting, sandblasting, coating, washing, and similar system needs, we aim for maximum efficiency with minimal manpower and space requirements.

Būklė: labai geros būklės (naudotas), 30 linear meters of Schäfer R3000 Shelf Rack Used, in mint condition, see photos Height: 2.5 m Depth: 80 cm Load capacity/shelf: 250 kg Bay width: approx. 128 cm Negotiation price: € 6,900 net ex stock Kdjdpfsd Nf Svjx Agfsi Offer includes: - 24 uprights/frames, 2.5 m, galvanized - 144 shelves, 250 kg capacity per shelf, galvanized - 9 cross braces for stabilization 6 levels per bay (additional levels can be supplied at extra cost) Also available with 100 cm bay width! Other configurations available. Heights of 2.5 m or 3.5 m in stock. Goods are in stock. Transport and assembly available on request. Inspection possible at any time by prior arrangement. More information available upon request. Over 5,000 linear meters of pallet racking of various manufacturers constantly in stock. (Specifications, technical data, and prices are subject to change and errors; intermediate sale reserved! See our Terms and Conditions. All prices are net ex stock, VAT not included.) Buying & Selling: We are always looking for and offering a variety of items from various sectors: - Thorough clearances of company premises - Liquidations - Fast - flexible - reliable! We also clear out and/or dispose for insolvency administrators. Contact us with a brief description and we will get back to you promptly. To visit our page, please click on our logo!

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) Kdodomhhf Sepfx Agfsi - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Briaunavimo staklės Gamintojas: Felder Modelis: Tempora 60.06, F600 Pagaminimo metai: 2019 Kdodpfx Agexix Hxofji Pilnai automatinis valdymas iš valdymo pulto. Sujungimo agregatas: Taip Nukirtimo pjūklas: Taip Spindulio frezavimo agregatas: Taip Spindulio nuėmimo peilis: Taip

Būklė: naudotas, Gamybos metai: 2022, veikimo valandos: 99 h, mašinos/transporto priemonės numeris: 2106313, Pavara: ratai Savaeigis svoris: 2 680 kg Stiebas: lanksčioji svirtis Kdedpfotr Irpsx Agfsi Keliamoji galia: 200 kg Darbinis aukštis: 1 000 cm Maksimali horizontali pasiekiamumo zona: 300 m Transportavimo matmenys (I x P x A): 2,7x1x1,99 m Dėl daugiau informacijos kreipkitės į PFEIFER GROUP.

Gamybos metai: 2021, būklė: naujas, Cantilever rack, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW –: Price ex location including loading! 1 rack unit with 4 uprights €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional frames, you can build longer or shorter rack units (or by varying bay spacing). This example with 4 frames is just the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 rack uprights, double-sided, approx. 4.16m high, hot-dip galvanized - IPE 160 / 100 - Each with 2 x 3 adjustable arms, 1.20m, 750kg load capacity per arm - With bracing approx. 1.30m - Rack uprights double-sided approx. 4160mm high, hot-dip galvanized Kdsdpfxjfivhfs Agfoi - Foot and arm depth 1200mm with 3 height-adjustable rack arms each - Load capacity at 600mm load center: 750kg per arm / 2250kg per upright side - With longitudinal and diagonal bracing, e = 1300mm, standard is 1.30m - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From a length of 1.50m, a small surcharge applies to the stated price! - Special sizes (other bay spacings) are also available on request, but also incur a surcharge and have a longer delivery time as they must be custom-made! - If you do not specify a different bay spacing, we will deliver the rack with a bay spacing of 1.30m. - In this case, the length for a rack row with 4 uprights (3 bays) is approx. 4m. - Delivered with all bolts and nuts (shipping within Germany via parcel service directly from Würth), excluding floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Būklė: naujas, Gamybos metai: 2024, SCHORR SCRUBBER-DRYER 24V FLOOR CLEANER SCRUBBER 100AH FLOOR SCRUBBING MACHINE Efficient floor cleaning combined with extremely simple operation. Restore shine to your hall! The fully electric ride-on scrubber-dryer from SCHORR makes cleaning large hall areas significantly easier, particularly thanks to its excellent maneuverability. With a steering angle of 90°, obstacles such as pillars or tight spaces are no issue. No special training is required to operate the machine. Simply fill, sit, and drive. Thanks to the equipped 100Ah batteries, continuous intensive use for approximately 4 hours is possible. The batteries can be conveniently charged with the supplied charger using any standard 230V socket. SCHORR SCRUBBER-DRYER RR1030FS – DISCOVER THE ADVANTAGES: -- Fully electric scrubber-dryer with 1030 mm working width – ideal for large halls and rooms -- Up to 4,500 m²/h cleaning performance -- 80-liter clean water tank and 85-liter waste water tank -- 510 mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Kedpfeuacy Asx Agfodi Technical Specifications Manufacturer (short name): SCHORR Manufacturer model: RR1030FS Drive: Ride-on Vacuum motor power: 500 W Brush motor power: 500 W Drive motor power: 500 W Operating time: approx. 4 hours Number of wheels: 3 Tyres: PU (non-slip) Own weight: 250 kg Basic Dimensions Clean water tank volume: 80 l Waste water tank volume: 85 l Brush diameter: 510 mm Overall length: 1400 mm Overall width: 1030 mm Overall height: 1100 mm *Further technical details available upon request. The ride-on scrubber-dryer is designed to make the cleaning process as straightforward as possible. The intuitive control panel ensures simple operation of all functions, allowing even inexperienced operators to use the machine quickly. Thanks to the ergonomic seat and clear visibility of the cleaning area, you can work comfortably and efficiently. The large 80-liter clean water tank and 85-liter waste water tank enable long cleaning intervals without frequent refilling or emptying. The machine is easy to maneuver and perfectly suited for use on large surfaces. We usually have all spare parts in stock and can deliver them quickly in case you need anything. If you require technical assistance, we have the necessary expertise and can carry out repairs in our in-house workshop. Would you prefer to finance or lease the machine? No problem! We also offer attractive financing options. Simply contact us, and we will advise you on the available possibilities. We look forward to your inquiry! The SCHORR team is happy to answer any questions you may have regarding our ride-on scrubber-dryer. You can reach our knowledgeable team by phone or email. We look forward to hearing from you and helping you choose the right solution.

Būklė: naujas, Technical Data for Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Technical Data for Installation: Number of rack rows: 01 pcs. Length per rack row: approx. 2,550 mm Number of bays per rack row: 01 pcs. at 2,400 mm each Number of levels plus ground level: 04 pcs. Scope of delivery includes: 02x Pallet rack frames, new Material color: Sendzimir galvanized Kdjdpfx Askti Siegfji Base plate color: RAL 5010 gentian blue Frame type: P73 Frame profile: 75 x 75 x 2.00 mm Incl. horizontal and diagonal bracing, base plates The frames are supplied unassembled (bolted lattice structure) 2,350 mm high 800 mm deep Note: The rack frames are supplied unassembled. We can pre-assemble the frames for you at an additional charge of €17.50 plus 19% VAT. 08x Pallet rack beams, new Material color: RAL 7035 light grey Box profile: 80 x 40 mm Beam type: ASM50-CES80|40|1.5 Design: Step beam Connector: 5 HK (hooks) Clear width: 2,400 mm Max. load per pair of beams: 1,600 kg, with evenly distributed load 04x Chipboard panels, 2nd choice, used Thickness: 22 mm Dimensions: 2,380 x 710 mm Surface: possibly coated (possibly two-piece) 16x Locking pins, new Design: fully galvanized For securing the beams against unintentional lifting 08x Through bolts, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 04x Shims, new Design: fully galvanized For levelling rack frames set up on uneven ground 01x Load sign With information on bay and compartment loads, manufacturer, and order number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Delivery or shipping of this item incurs additional costs, which can be quoted separately depending on the delivery location and scope.