Konsolinis stovas

Kragarmregal doppelseitig Höhe 3.500 mm Tiefe je Seite 1.200 mm / Länge 4.000 mm

Būklė: labai geros būklės (naudotas), Thickness planer SICAR Forte 400 Working width: 400 mm Planing height: 300 mm Cutter block with traditional knives 4-knife cutter block Cutter block speed: 5200 rpm Electric lifting and lowering of the worktable Main motor power: 3 kW 3 feed speeds CE certificate Nlsdpst Rp Hxsfx Ag Hef

Būklė: naudotas, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Maximum spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled Nljdpfx Aeuhauyeg Hjf - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor system KNOLL VRF 500 - Workpiece evacuation with conveyor at position 6

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. Njdsh Ek Daspfx Ag Helf When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, reikalingas plotis: 3 200 mm, vietos reikalavimas ilgis: 1 200 mm, reikalingas aukštis: 2 100 mm, bendras svoris: 170 kg, bendras plotis: 3 200 mm, bendras ilgis: 1 700 mm, vidinis plotis: 1 500 mm, HEAVY DUTY Drying Wagon / Cantilever Wagon – For the Toughest Demands Key facts at a glance: 1. Ball-bearing slide rail for adjustable width from 1.70 to 3.00 m span 2. Space-saving, can be nested into each other Nljdsfiuhvspfx Ag Hjf 3. High clearance between levels – 135 mm for easy loading, even with fast work cycles 4. Upright, square-section frame for minimal support surface 5. Deep usable depth – 1,000 mm 6. High load capacity – 1,000 kg 7. Premium quality rollers, easy to move even when loaded Simply top-quality – Made in Denmark. The wagons are generally available directly from stock. To save shipping costs for our customers, we deliver the wagons pre-assembled (see picture). Set-up is quick and easy. Any questions? Contact us – we are happy to help!

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth Nodpfx Aomhhypeg Helf - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Būklė: naudotas, Gamybos metai: 2002, Maximum turning diameter: 420 mm Turning length: 1250 mm Control: INDEX, C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1250 mm Travel X2: 170 mm Travel Z2: 1250 mm Travel X3: 320 mm Travel Z3: 1250 mm Main spindle speed, max.: 3,000 rpm Main spindle motor: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Sub spindle – max. speed: 3,000 rpm Sub spindle motor: 53 kW Sub spindle bore: 102 mm Sub spindle nose: DIN 55026 size 11 Sub spindle torque: 675 Nm Sub spindle travel: 1250 mm Feed force X1/Z1: 14,000 N / 14,000 N Rapid traverse X1/Z1: 20 m/min / 40 m/min Nedet U R Hzjpfx Ag Hjlf Feed force X2/Z2: 8,600 N / 14,000 N Rapid traverse X2/Z2: 20 m/min / 40 m/min Feed force X3/Z3: 14,000 N / 14,000 N Rapid traverse X3/Z3: 20 m/min / 40 m/min Number of turret stations, turret 1: 12 Number of turret stations, turret 2: 10 Number of turret stations, turret 3: 12 Number of driven tool stations: 12 / 10 / 12 Driven tool speed, max.: 6,000 rpm Torque: 36 / 21 / 36 Nm Tool holder: DIN 69880 Tool holder diameter: 40 x 63 mm Total power requirement: 120 kW Machine weight approx.: 19 t Machine dimensions L x W x H: 5.77 x 2.47 x 2.62 m Accessories: HAINBUCH segment mandrel chuck on main spindle, HAINBUCH collet chuck, SPANNTOP SP on sub spindle, various tool holders (incl. for driven tools), chip conveyor, coolant system - all 3 tool turrets are prepared for internal coolant supply (ICS), but the high-pressure system is not included with the machine -

Būklė: dilaminuotas dirbtuvėje (naudotas), Steel Grinding Machine Manufacturer: REMA Nsdpfx Aehvu Tmeg Helf Model: DS 07/ST Version with pole-changeable motor 0.22/0.37 kW 1450/2900 rpm Year of manufacture: unknown Serial No.: 022857 Features: - Reversing switch for clockwise/counterclockwise rotation - Pedestal version with chip tray - Wet grinding device - 2 workpiece support tables ATS (left) tiltable from -5° to +15° and equipped with spring arms - 2 angle stops - Adjustable support table ATK (right) for grinding chip breaker steps - Steel holder for ATK support table 360° rotatable, swiveling, with height adjustment and knurled screw for setting chip depth - Enlarged protective hood (left) with silicon carbide cup wheel Ø 175 mm with mounting flange - Protective hood (right) for grinding wheels Ø 125 mm with mounting flange - Operating manual Used, as seen, without warranty

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036936, spaudimo jėga: 800 kN, varžto skersmuo: 35 mm, darbinio tūrio: 135 cm³, įpurškimo slėgis: 1 837 juosta, injekcijos svoris: 123 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 820 mm, bendras svoris: 5 900 kg, šildymo galia: 8,9 kW (12,10 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 470 mm, įrankio svoris: 600 000 g, Injection moulding machines direct from the manufacturer! As manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, straightforward operation, and short delivery times. This machine is suitable for a wide range of applications, including the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, year 2023) CONTROL SYSTEM  MC P1 with 15" TFT colour screen featuring multi-touch capabilities CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platens (h x v) mm 610 x 560  Minimum – Maximum mould height mm 150 – 400  Max. opening width mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forward/back kN 22 / 22 Nodjuggb Djpfx Ag Holf  Ejector speed forward/back mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke (PS) g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticising rate (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating capacity kW 8.9  Power supply V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticising  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control hot runner shut-off 1-fold  Electrical interface for cascade control 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces for handling E18, E63  Euromap interface (central computer) E67, E77  Water manifold 4-fold  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression moulding function  Graphics analysis package  Swivelling device for injection unit The machine is located at our site in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing Njdpomhhf Sefx Ag Hjlf - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, The CIDAN folding machine MEGAPRO is the most powerful member of the product family. Thanks to its solid and robust construction, it enables bending of 6 mm steel (5 mm at 4100 mm) or 4 mm stainless steel (3.2 mm at 4100 mm) across the entire working length (with a working length of 3,100 mm). The MEGAPRO comes standard with many intelligent features such as automatic adjustment of sheet thickness, automatic bending angle adjustment and CNC-controlled crowning in the table. It is also equipped with a pneumatic tool clamping system. Additionally, we offer you various backgauge lengths. Key advantages: - For high speed and precision, the upper beam and bending beam are equipped with dual-driven servo motors. - CNC-controlled sheet thickness adjustment, bending center, and crowning. Nsdpstvl Sgefx Ag Hjlf - Choice of pointed or gooseneck rail (up to 150 mm) can be used. - The upper beam achieves a clamping force of up to 60 tons. Performance: 6 mm at 400 N/mm² (5 mm at a working length of 4100 mm) 5 mm at 600 N/mm² (3.2 mm at a working length of 4100 mm) 9 mm at 200 N/mm² (7.5 mm at a working length of 4100 mm)