Konsolinis stovas

Kragarmregal einseitig Höhe: 3.000 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg Dsdpsmhh Anefx An Hech - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: naudotas, Gamybos metai: 1997, - Edge banding unit - Cross-cut unit - Milling unit - Fine milling unit Dodpfx Aned Inktj Hoch - Scraper - Buffing unit

Būklė: naujas, Gamybos metai: 2024, Boring and Inserting Machines Rilesa Vlg 2200, new, March 2024 Make: Rilesa Model: Vlg 2200 Description: Condition: new Year: 2023 Startup Type: to be agreed Shipping Cost: Buyer Protection Delivery Terms: Dcsdpfjgbpmhjx An Hoh EXW (EX WORKS) – COLLECTION BY BUYER Category: Machine Tool Accessories in Poland Subcategory: Drill Bits Subcategory 2: Drilling Machines Description: DRILLING MACHINE WITH AN 8-SPINDLE MAGAZINE, TWO FRONT RIGHT AND LEFT, 3 TOP, AND 3 REAR. Year: 2024 The machine can be equipped with additional drilling heads; we are also a manufacturer of heads available in various spacings and with varying numbers of drilling spindles, tailored to individual requirements.

Būklė: geras (naudotas), Gamybos metai: 2006, mašinos/transporto priemonės numeris: 108111, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 240 mm, obliavimo aukštis: 160 mm, darbinio aukščio: 180 mm, Four-sided planer after maintenance, machine weight 3,900 kg. Dcsdpovrq U Djfx An Hsh

Būklė: naujas, Typ: SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: frequenzgeregelt Vorschubgeschwindigkeit: 3–12,5 m/min Dcodpfxsdmi Nij An Heh Gesamtanschlussleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Querwalzenmotor: 1,5 kW × 1 Schraubwalzenmotor: 2,2 kW × 2 Vorschubmotor: 2,2 kW Hubmotor (oben/unten): 0,37 kW × 4 Schenkelschwenkmotor: 0,37 kW × 2 Arbeitstisch-Hub: 0,55 kW Transportabmessungen (L×B×H): 3650×1850×2100 mm Gewicht: 4200 kg

Būklė: naudotas, veikimo valandos: 10 420 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: ES2234, rida: 74 155 km, galia: 75 kW (101,97 AG), pirmoji registracija: 05/2016, bendras svoris: 4 900 kg, kuro tipas: dyzelinas, spalva: balta, ašių konfigūracija: 4x2, didžiausias leistinas svoris: 1 900 kg, tuščias svoris: 3 000 kg, kita apžiūra (TÜV): 01/2027, kuras: dyzelinas, vairuotojo kabina: dieninė kabina, pavaros tipas: hidrostatinis, emisijos klasė: Euro 5, Įranga: hidraulika, suodžių filtras, žemas triukšmo lygis,

Gamybos metai: 1999, būklė: geras (naudotas), Biesse Polymac ERGHO 5 Edge Banding Machine, Year of Manufacture: 1999 Biesse Italy S/N 80709 Maximum panel thickness: 10–45 mm Minimum and maximum edge band thickness: 13–60 mm Maximum edge banding material thickness (in rolls): 0.4–3 mm Minimum panel width: 50 mm Minimum panel length: 150 mm Feed speed (m/min): 10/20 Dedsgtx Aqepfx An Hech Technical specifications: • Glue pot VC 700 • End trimming unit 701 • Edge trimming unit RS 700 • Corner rounding unit CR 200 • Tilting edge trimming & chamfering unit RI 700 • Compact scraper blade RBK501 • Buffing unit SP700 • Edge sanding unit LV 700 Additional features: • Heated infeed guide • PLC control • Panel support guide • Large diameter roll holder • Edge trimming device for 3 mm thick roll edges 400 V, 50 Hz CE marked Machine dimensions (L x W x H): 4950 mm x 1700 mm x 1530 mm Weight: 2,900 kg

Būklė: naujas, Tipas DC-9052 Oro srautas: 4560 m³/h Įvado diametras: 4x100 mm / 1x180 mm Ventiliatoriaus diametras: 356 mm Maišo talpa: 307 l Surinkimo maišas: ø 480 × 4 3 fazės, 400 V / 50 Hz Variklio galia: 5,6 kW Dodpfx Aofiiwxjn Hoch Matmenys: 2764x585x2355 mm Transportavimo matmenys: 1600x720x840 mm Svoris: 125 kg

Gamybos metai: 1996, būklė: labai geros būklės (naudotas), Automatic slot mortising machine with two tables and oscillating ends BALESTRINI 2CAP Maximum tenon length: 120 mm Maximum mortising depth: 80 mm Spindle speed: 9,000 rpm Spindle motor: 3 Hp Oscillation motor: 1 Hp Dcsdpfx Asgmucpon Hjh Pneumatic workpiece clamping Overall dimensions: 1000 x 900 x 1250 mm Weight: 500 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) Dedpfx Aomhhf Son Hech - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.