Konsolinis stovas

Kragarmregal einseitig Höhe: 4.160 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Djdpfx Agomhh Dts Iokt Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Būklė: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition Dodpfx Agerigxyo Ijkt

Gamybos metai: 2007, veikimo valandos: 4 100 h, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Šio įrenginio mūsų gamyboje daugiau nereikia, todėl jis parduodamas. Nuo 2007 metų įrenginys priklauso mums ir yra reguliariai prižiūrimas. Viskas veikia tinkamai. Išmontavimas ir pakrovimas į sunkvežimį įskaičiuoti į kainą. Papildoma informacija: 5 ašių profilių apdirbimo centras Sukurtas lanksčiam ir efektyviam aliuminio apdirbimui Autonominis spaustuvų pozicionavimas Maksimalus darbinis ilgis: 9 300 mm 12 pneumatinių spaustuvų Įrankių žurnalas talpina 20 įrankių ir 500 mm pjūklo diską Veleno darbo valandos: 4100 h Dkedpfx Agswwtw Ds Iet Papildomos techninės specifikacijos pateikiamos pagal užklausą.

Būklė: naudotas, Gamybos metai: 2004, kuro tipas: dujos, Load capacity: 2,500 kg Lift height: 3,050 mm Fork length: 1,200 mm Load center: 500 mm Turning radius: 2,444 mm Travel speed: 22 km/h Front track width: 1,008 mm Rear track width: 932 mm Dkodpsr Dg H Eefx Ag Iot Machine weight: approx. 3.64 t Space requirement: approx. 3.8 x 1.25 x 2.25 m

Būklė: naujas, Drilling capacity in steel (diameter): 32.0 mm Throat depth: 255 mm Quill stroke: 120 mm Morse taper: 4 MT Table: 385 x 335 mm Speed range: 80 - 2130 rpm Total power requirement: 1.1 / 2.2 kW Dkjdpfxsxaaqgj Ag Ijt Weight: 125 kg Dimensions (L-W-H): 460 x 900 x 1730 mm Features: - Surface-machined work table - Height adjustable via rack and pinion mechanism with hand crank - Ground base plate with T-slots for clamping tall workpieces - V-belt drive with balanced pulleys for smooth operation - Adjustable drilling depth stop for precise spindle feed - Powerful 2-speed motor, speed range from 80 - 2130 rpm - Forward/reverse switch for clockwise and counterclockwise rotation included - Crosshair laser device for convenient operation - Compact, stable cast iron construction in modern design - Sturdy, ground steel column designed for high loads Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyless drill chuck 1 - 16 mm / B 18 - Cam switch for forward/reverse operation - Crosshair laser device - T-slot nuts - Height-adjustable protective cover

Būklė: naujas, Table length 2000 mm Table width 1000 mm Lifting height 400 - 1010 mm Load capacity 300 kg Machine weight approx. 220 kg Description: - Robust support frame for worktops - Ergonomic and back-friendly operation thanks to height adjustment via foot pedal - Optimum maneuverability with 4 swivel castors, 2 with locking brakes - Beech multiplex panel 2,000 x 1,000 x 30 mm Dkedpfjv Htkdsx Ag Iot - 5-year warranty

Gamybos metai: 1996, būklė: paruoštas naudoti (naudotas), Pagaminta: 1996 m. Maksimalus dydis: 480 x 320 mm Apdoroto dydis: 480 x 320 mm minimalus 153 x 108 mm Apdoroto dydis: maksimalus 475 x 300 mm minimalus 148 x 105 mm Dksdpfxed N D Nts Ag Ijt Produkto storis: maksimalus 13 mm Greitis: maksimalus 13 000 vnt./val. Galvučių skaičius: maksimalus 6 Įranga: surinkimo grandinė ir padavimo įrenginys trijų peilių apipjaustymo įrenginys

Gamybos metai: 1996, būklė: paruoštas naudoti (naudotas), Pagaminimo metai: 1996 Formato dydis: maks. 480 x 320 mm Neapdoroto formato dydis: maks. 480 x 320 mm min. 153 x 108 mm Apdoroto formato dydis: maks. 475 x 300 mm min. 148 x 105 mm Produkto storis: maks. 13 mm našumas: maks. 13 000 c/h Įranga: Surinkimo grandinė ir padavimo įtaisas • 6 stotys • 5 padavimo įtaisai 370 • 1 lankstymo padavimo įtaisas Rištuvo stotis • Rištuvo stotis 390 • Rištuvo vielos atsukimo įtaisas Dodpfx Asizi Ivog Iekt • Storio kontrolė / pliusas-minusas • 2 rištuvo galvutės Trijų peilių pjovimo įrenginys • Trijų peilių pjovimo įrenginys 360 Peiliai • 2 peilių komplektai

Būklė: naujas, Matmenys: plotis 2500 mm / ilgis 5250 mm / aukštis 2100 mm Dkodpfx Agou E Ezpe Iet

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. Dkodpsmhhypsfx Ag Ist We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.