Ilgas juostinis šlifuoklis

Johansen T 85 PNEUMA

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1988, Automatic wide belt sander with 2 belts for lacquers, wood, veneer, composite materials and various other materials Machine can be integrated into a production line Technical data: Working width: 1350 mm Maximum usable height: 130 mm Belt size: 2450 x 1350 mm Configuration: 1st unit: Sanding drum diameter 320 mm - grit 60 - cleaning belts for blower - 11 kW motor with variator 2nd unit: Sanding drum diameter 320 mm - grit 40 - cleaning belts for blower - 11 kW motor with variator Scotch Brite unit - 1.5 kW motor Hodpfx Ajgmbu Iob Ajh Vacuum table Belt speed variator: 4–19 m/min Operating pressure: 7 bar Dimensions (machine): 2000 x 2750 x 2200 mm Vacuum pump: 800 x 700 x 900 mm (h)

Sąlyga: naudotas, No. 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, maximum specific pressure 2 kg/cm² Heating: 2 x 1.8 kW Hedsxl Ha Sopfx Ab Ajh - Long belt sanding machine 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Panel saw / veneer saw / trimming saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Maximum saw blade diameter 250 mm With chain feed - Extraction unit for sanding machine and saw 0.55 kW Airflow approx. 11 m³/min Push-button control with main and emergency stop switches Machine mounted on chassis Installation footprint (according to manufacturer): 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: “sold as seen”. Payment terms: Prices plus statutory VAT, payment before collection or shipment Delivery terms: ex stock

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008338, Darbo sritis X ašis: 4600 mm Darbo sritis Y ašis: 1935 mm Darbo paviršius: Su vakuuminiais konsoliais Hsdpfx Abox A Tkxs Aoh Pagrindinio veleno galia: 15 kW Valdomų ašių skaičius: 5 ašys Gręžimo velenų kiekis: 31 Įrankių vietų skaičius: 37

Sąlyga: labai geros būklės (naudotas), Belt Sanding Machine LANGZAUNER Type LZG Approx. sanding table dimensions: 2500 x 800 mm Approx. sanding belt dimensions: 6800 x 150 mm Motor power approx.: 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Belt reversible for right/left rotation Sanding belt cover on top Work area with light bar CE compliant Includes special sanding shoe Hsdpfx Ajuxnyueb Ash Includes extraction fan NEW GRAPHITE CLOTH Note on used machinery: • Technical data and intermediate sale subject to error and change. • Prices quoted are ex-works—free loaded! • All machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Gamybos metai: 1996, Sąlyga: labai geros būklės (naudotas), Automatic slot mortising machine with two tables and oscillating ends BALESTRINI 2CAP Maximum tenon length: 120 mm Hjdpfx Abjgmucpj Aoh Maximum mortising depth: 80 mm Spindle speed: 9,000 rpm Spindle motor: 3 Hp Oscillation motor: 1 Hp Pneumatic workpiece clamping Overall dimensions: 1000 x 900 x 1250 mm Weight: 500 kg

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard Hedpfxsmhhf Se Ab Aoh - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Sąlyga: naujas, Gamybos metai: 2023, bendras plotis: 1 300 mm, bendras ilgis: 3 000 mm, spaudimo jėga: 120 t, atidarimo plotis: 400 mm, darbinė temperatūra: 120 °C, cilindro skersmuo: 85 mm,

Sąlyga: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Hodoxdl Raspfx Ab Ajh Workpiece dimensions Length: 20 – 1250 mm Width: 100 – 800 mm Thickness: 10 – 60 mm Active center stop: Max. length 600 mm Configuration: - Horizontal drilling unit with 3 individually selectable spindles, spindle spacing 32 mm - 1 dowel insertion unit (32 mm from the first drilling spindle) - Glue nozzle with adjustable glue volume - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel dimensions: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feed 1. BASE MACHINE - Robust steel frame construction - Axis travel in X, Y, and Z directions - Ball screw drive (Y and Z axes) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side stops and rear stop rail - Center stop pneumatically lowerable, manually controlled via selector switch - 6 top hold-down cylinders, manually adjustable - Central lubrication power control PC85T Modern control system based on Windows PC

Sąlyga: naujas, Gamybos metai: 2025, Grinding of curved materials using a side table Simple and quick sanding belt replacement via a lever Movable sanding unit allows for horizontal and vertical operation Additional height-adjustable table included as standard Tensioning device ensures even belt tension Hedpsvuggzofx Ab Ajh Compact machine dimensions with a wide range of applications Technical data: Belt size [mm]: 2010 x 152 Worktable size [mm]: 790 x 221 Table height [mm]: 810 Stand height [mm]: 600 Auxiliary table size for rounding [mm]: 514 x 221 Maximum grinding length [mm]: 790 Extraction port diameter [mm]: 100 Face and edge grinding angle [°]: 0 - 45 Belt speed [m/min]: 840 Motor power [kW]: 1.1 Power supply [V]: 400 Weight [kg]: 75 The stated price is net. Transport costs are not included.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking Used: Hot-dip Galvanised Bolted System Scope of Delivery: - 4 double-sided uprights, height 3,500 mm, each with 1,200 mm base plates - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre-to-centre distance - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Hodpfx Ajmkixwjb Ash Detailed Description: - Robust steel construction made of IPE sections - Surface of all components hot-dip galvanised - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, each with 1,200 mm depth, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. The material is properly packaged to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, suitable for dowelling, and able to absorb the applied loads. Floor structure and load-bearing capacity, as well as any necessary official approvals, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.