Langų sistema

WEINIG Unicontrol 6

Būklė: nepatikrintas (naudotas), Gamybos metai: 1999, Šlicavimo velenas 1 vnt. Frezavimo agregatų kiekis 4 vnt. Veleno skersmuo 50 mm Valdymas Weinig PC-Nexus #7015 Weinig Unicontrol 6 su NC velenais ----- Įrenginys eksploatuojamas iki 2026 m. rugsėjo, galima apžiūrėti veikimo metu Techninių duomenų santrauka (Dėl galimai papildomos komplektacijos prašome teirautis) Poz. 1: Ilginimo pjūklas ----- > Ilginimo pjūklas, elektroninis, horizontaliai sklandžiai reguliuojamas > Įrankių kiekis: 1 vnt. > Veleno apsisukimų dažnis: 2.800 aps./min > Veleno skersmuo: 40 mm > Maks. įrankio skersmuo: 400 mm > Variklio galia: 3,0 kW > Lazerinė linija pjūvio vietai nustatyti > NC ilgio atmušėjas, montuotas ant šlicavimo stalo, įskaičiuotas Ilginimo pjūklo pozicionavimas integruotas į valdymą. > Ilgis 3500 mm Poz. 2: Špizo ir šlicavimo velenas ----- > Įrankių kiekis: kintamas, valdomas NC ašimi be fazių > Įrankio tvirtinimo ilgis: 320 mm > Veleno vertikalus eiga: kintama, be fazių, 254 mm NC ašis > Veleno apsisukimų dažnis: 3.500 aps./min > Veleno skersmuo: 50 mm Ljdpfszdk Hyjx Akhsac > Maks. įrankio skersmuo: 320 mm > Variklio galia: 11 kW Poz. 3: 1-asis profiliavimo velenas (vienkryptis ir priešpriešinis) ----- > Padėtis: vertikalus dešinėje > Įrankių kiekis: 1 vnt. > Įrankio tvirtinimo ilgis: 120 mm > Veleno apsisukimų dažnis: 6.000 aps./min > Veleno skersmuo: 50 mm > Maks. įrankio pjovimo skersmuo: 232 mm > Variklio galia: 7,5 kW Poz. 4: 2-asis profiliavimo velenas ----- > Padėtis: vertikalus dešinėje > Įrankių kiekis: kintamas, valdomas NC ašimi be fazių > Įrankio tvirtinimo ilgis: 320 mm > Veleno vertikalus eiga: kintama, be fazių, 254 mm NC ašis > Veleno apsisukimų dažnis: 6.000 aps./min > Veleno skersmuo: 50 mm > Maks. įrankio pjovimo skersmuo: 232 mm > Variklio galia: 11 kW Poz. 5: Horizontalus viršutinis profiliavimo frezavimo agregatas ----- > Tvirtinimo ilgis: 40 mm > Veleno skersmuo: 40 mm > Variklio galia: 3,0 kW > Apsisukimai: 5.850 aps./min > Maks. įrankio pjovimo skersmuo: 130 mm > Ašinė eiga 2 pozicijos > Radialinė eiga 2 pozicijos Poz. 6: 3-iasis profiliavimo velenas (furnitūros velenas) ----- > Padėtis: vertikalus dešinėje > Įrankio tvirtinimo ilgis: 160 mm > Ašinė eiga 3 pozicijos > Radialinė eiga 2 pozicijos > Veleno apsisukimų dažnis: 5.850 aps./min > Veleno skersmuo: 40 mm > Maks. įrankio pjovimo skersmuo: 210 mm > Variklio galia: 3,0 kW Kitos funkcijos ----- > Prijungimo prie interneto galimybė > Falcavimo įrenginys švariam falcavimui be atplaišų > Dvigubų ruošinių paketas > Grąžinimo įrenginys darbui vienam operatoriui: lamelinis transporterio konvejeris > Ekraninis valdymas > Kampinių langų įrenginys > Elektroninė kampo indikacija kampiniams langams > Pramoninis PC, PC-valdymas / NEXUS > Be apdirbimo įrankių ----- Minėtos staklės kainą pateiksime pagal užklausą! ----- Papildoma opcija su priemoka: 6 500,00 EUR Naudotų įrankių pastaba: Šiuo metu turime naudotus Gold įrankius, sandėlio nr. #2790 Langų įrankiai Gold IV78 medžiui ir IV78 medžiui/aliuminiui Buvo naudoti Weinig Unicontrol 10, naudojant Unicontrol 6 reikia papildomo sujungimo frezos. Įrankių komplektas FESTHUB arba CNC velenų staklėms su 80 ir 95 mm eiga, (komplektas techniškai paruoštas IV 92) Medžio-aliuminio įrankių komplektas FESTHUB staklėms su 80 ir 95 mm eiga ir papildomi įrankiai 1 komplektas Stehle IV68 medžiui taip pat įskaičiuotas Be Gla...

Būklė: naudotas, Velenų skaičius: 5 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 120 mm Obliavimo ir profiliavimo automatas Weinig Profimat 23 E, skirtas keturpusiam medienos obliavimui ir profiliavimui su mobiliu velenu. Velenas 1: Apačioje / 5,5 kW / 40 mm Velenas 2: Dešinėje / 5,5 kW / 40 mm Velenas 3: Kairėje / bendras variklis su nr. 2 / 40 mm Velenas 4: Viršuje / 7,5 kW / 40 mm Lodex Ecgujpfx Akhoac Velenas 5: Apačioje / 4 kW / 40 mm

Būklė: nepatikrintas (naudotas), Slotting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window machining center ----- For sale on behalf of customer Manufacturer’s description: Designed for the production of individual parts, components, and small series. Spindle arrangement: One crosscut saw, a single tenoning and slotting spindle, a right-hand profiling spindle, a tenoning/slotting spindle, and a profiling spindle suitable for stacking multiple tools on top of each other, with pneumatic spindle movement. Slot table with motorized table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit. Height adjustment of the feed by manual control. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for precise frame or sash external dimensions. Control of tool positions (longitudinal and cross machining) via selector switch on the operator panel. Technical data ----- Crosscut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor: 3 kW Tenoning and slotting spindle ----- Number of tools: 3/4 pcs. for timber thicknesses IV 68 – IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thicknesses IV 68 – IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 232 mm Motor: 11 kW Special equipment: Synchronised spindle ----- Pneumatically actuated forward/backward motion for tear-free profiling of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, tool min. diameter: 112–140 mm, max. tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for synchronised spindle from 4 kW to 7.5 kW Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production possibilities: single pieces, double pieces, by frame, series production, profiling. Data input via keyboard with integrated user guidance and error diagnostics. 1 Groove spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Mounting length: 13 mm Clamping length: 40 mm Axial stroke: 2 positions Radial stroke: 2 positions Max. tool diameter: 130 mm Lajdpsx Tu N Hsfx Akhec Motor upgrade for groove spindle from 2.2 to 3 kW 1 hardware recessing unit, right: ----- For routing the hardware groove during profiling or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the operator panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting circle: min. 140 mm, max. 180 mm Home position below table: 10 mm Hardware router in special design: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial stroke, 2 positions Motor upgrade for hardware routing spindle from 2.2 to 3 kW Hardware routing spindle for 230 mm tool diameter in and above table Electrical height adjustment of the feed with selector switch on the operator panel for 2 timber dimensions, includ...

Būklė: dilaminuotas dirbtuvėje (naudotas), Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- The machine will be cleaned and fully inspected before delivery. Technical Data Overview (additional accessories possibly included; please inquire separately) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut detection > NC length stop, mounted on slot table included Positioning of cross-cut saw integrated in the control system. > Length: 3500 mm Pos. 2: Tenoning and slot spindle ----- > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling spindle (climb & counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Muntin guide consisting of: Guide rail on the stop (climb spindle section), muntin support bar from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal profiling unit, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool diameter: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online-capable > Rebate device for tear-free rebating > Double-parts package > Return system for one-man operation: swivel belt > Screen control > Tilt window unit > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without working tools No original pictures available yet. Images show an identical machine from our archive. ----- Lodpfx Aksvu Hfqsheac Price for the above-mentioned machine on request! ----- Option with surcharge: EUR 6,500.00 Note...

Būklė: naudotas, Weinig Profimat 22 with 4 left-hand mobile spindles, equipped with a measuring sensor for automatic adjustment based on the width of the workpieces being processed. Overall dimensions and weight: 330 x 145 x H160 cm. Weight 1400 kg (on pallet). Lsdpfsryb D Sjx Akheac

Būklė: naudotas, Used control cabinet from a Weinig Unicontrol 6, suitable as a source for spare parts or for building a new control cabinet. Contents include, among others: Laedpfx Ajt Na Drjkhoc - Hilger & Kern brake device - Rathgeber transformer, type ET 1000.

Būklė: dilaminuotas dirbtuvėje (naudotas), Slotting spindle 1 pc. Lodevu Hghspfx Akhoac Number of milling units 5 pcs. Spindle diameter 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully inspected before delivery ----- Technical Data Summary (For any additional included accessories, please inquire) Item 1: Cross-Cut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Radial travel, pneumatically controlled, 8 positions, e.g. for edge rounding from above > Laser guide light for cut section identification Item 2: Rounding Unit, Horizontal Lower Position ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial movement mechanically linked with cross-cut saw > Radial travel, pneumatically controlled (on/off) NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Item 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3,500 rpm > Max. tool circle diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Climb/Counter-Climb Cutting) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 7.5 kW Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash support rail from above in the area of the vertical right profiling unit and profiling spindle. Item 6: Horizontal Upper Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool circle diameter: 130 mm > Axial travel: 30 mm, 8 positions > Radial travel: 125 mm, 8 positions Item 7: 3rd Profiling Spindle (Hardware Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial travel: 115 mm, 8 positions > Radial travel: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool circle diameter: 210 mm > Motor power: 3.0 kW Item 8: Bottom Profile Milling/Grooving Unit ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Būklė: naudotas, Gamybos metai: 2008, without briquetting press Filter surface 32 m² with hopper transition to container or connection to rotary valve used, top condition, low hours Make: Schuko Type: Vacomat 300 Year of manufacture: 2008 Clean air unit / negative pressure GS dust-tested, BIA-certified CE type-tested Motor: 7.5 kW Connection diameter: 300 mm Pressure: 3090 Pa Air capacity: 5,800 m³/h Control system Filter pressure monitor Extinguishing device: powder extinguisher Original price approx. €17,000.00 Space requirement approx. 3600 x 1590 x 2550 mm / 4400 mm without hopper Location: 97447 Gerolzhofen, free loaded, unpacked Ledovxlqmspfx Akheac Transfer in as-inspected condition, without warranty or guarantee

Būklė: labai geros būklės (naudotas), WEINIG Window Production Line, Unicontrol 6, S/N 035-823, Year 1997 Crosscut saw, pneumatically indexed (3 kW) with laser guiding light Slot spindle 50 x 320 mm for 4 tools of 80 mm each – 11 kW motor Parallel spindle 50 x 120 mm – 7.5 kW motor Longitudinal profiling spindle 50 x 320 mm for 4 tools of 80 mm each – 11 kW motor Hardware fitting spindle, pneumatically indexed, 40 x 160 mm – 3 kW motor Saw/grooving spindle, horizontal at the top, pneumatically indexed – 3 kW motor Feed adjustable from 6–12 m/min. – 1.1 kW motor Screen control for 99 window types Support rail for glazing bar production, pneumatically indexed Special window setup with digital angle display Length stop up to approx. 3,500 mm Rebating unit with support rail Return transport device to machine operator Complete machine with operating instructions, circuit diagrams, spare parts lists LEITZ tool set, IV-78 Laodpey Dud Eofx Akhoc THE SYSTEM IS IN VERY GOOD TECHNICAL AND VISUAL CONDITION Delivery: EXW Lead time: promptly after arrangement Inspection: by appointment Payment: Upon notification of readiness for dispatch Errors and prior sale excepted.

Būklė: labai geros būklės (naudotas), Apatinės veleno frezavimo staklės SCM T150 Veleno skersmuo: 35 mm Ljdpsw Ral Hefx Akhoac Bendras veleno ilgis: 180 mm Elektrinis veleno pakėlimas Elektrinis liniuotės judėjimas Elektriškai reguliuojamas kampas -10/45° Kintamas veleno greitis: 3000-4500-6000–7000-10000 aps./min Variklio galia 5,5 kW DTR techninė dokumentacija