Briaunų apklijavimo mašina

Lange Maschinenbau B 90 KFE

Sąlyga: naudotas, Gamybos metai: 2018, Edgebanding machine AKV 3006 DK - F with jointing unit including DIA tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combination milling station Radius R 2.5 mm Technical Description: - Application of hot-melt adhesive to workpieces for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with disposable insert cutters (combination type) and fine adjustment of cutter from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Adjustable cutting depth for cross-cut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate inspection windows from the rear and operator sides of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thicknesses: 8 - 40 mm - Weight: approx. 1550 kg depending on configuration - Dimensions (L x W x H): 5250 x 1445 x 1600 mm - 2-point pneumatic cutter adjustment, 1 unit - Switching between radius / flush / chamfer on the combination milling stations - Switching between chamfer or flush is done manually by shifting the stop flap inside the machine - Buffing station (swab) 1 unit - Corner rounding cutter 1 unit including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm - Radius scraper 1 unit including pneumatic lifting device, radius R 2.0 mm - Surface scraper 1 unit with pneumatic engagement control - Glue pot quick-change system including second glue pot with downward glue outflow, 1 unit for quick color changes Nwsdpexfh Tmefx Ad Uep - Horizontal grooving saw unit into the edge, 1 unit including pneumatic lifting device and groove tool - Separate extraction for jointing unit, 1 unit directly at the jointing unit, vertically upward d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onward - Ball bearing for corner rounding cutter 24.1 mm, 1 unit - Ball bearing for corner rounding cutter 24.2 mm, 1 unit - Interchangeable motor 0.37 kW for corner rounding cutter, 1 unit with quick-change device including radius cutter R 1 - Interchangeable spindles, 1 set = 2 pieces, 1 unit - Set of quick-change motors for longitudinal processing above and below, including tool R 1 - Compressed air requirement: 100 - 150 l/hr Storage location: Nattheim

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, aukščio reguliavimo tipas: mechaninis, įėjimo įtampa: 400 V, reikalingas aukštis: 1 200 mm, Edge bander equipped with: - Trimmers - Edging tape magazine Nwjdpfx Adowy Ugxe Uop - Interchangeable hotmelt EVA or PUR glue pot - Flush trimming - Corner rounding units

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008018, Uždedamos briaunos tipas: plona briauna, stora briauna, masyvi mediena Klijavimo sistema: EVA, PUR Sujungimo frezavimas: taip Multifunkcinis agregatas: taip Nedpfxowv Dfcs Ad Uswp Maks. padavimo greitis: 20 m/min Maksimali plokštės storis: 60 mm Darbiniai agregatai: 7 vnt.

Sąlyga: naudotas, Gamybos metai: 2009, HOLZ-HER Edgebander CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speed: Infinitely variable feed from 12–30 m/min (depending on equipment) - With adjustable infeed table in the magazine area (max. adjustment range 30 mm) - With height-adjustable magazine disc for modifying the lower edge overhang - Large magazine disc Ø 820 mm for edge coils up to Ø 800 mm - With transport chain incl. automatic central lubrication - With motor-driven, position-controlled bridge height adjustment - With pneumatic stop roller for shortest workpiece spacing - With extendable workpiece support (extension length 1600 mm) - With space-saving, pneumatically operated sliding hoods over the entire machine (deviations possible on individual aggregates) - With motorised infeed fence - With spray oiler for lubricating all joints and bolts (including operating hour counter) - With central connection for extraction (2x Ø 200 mm) - With integrated chip collection box at the end of the machine (when radius scraper unit installed) Control PPC 231 - Power PC for efficient setup and tool changes - 15” SVGA touch screen Nwjdovvkfdepfx Ad Ujp - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - All information in clear text and/or graphics - Rotatable and swivelling operator console at eye level - Dust-proof membrane keypad with soft keys (pushbuttons) - LED indicator for aggregate preselection - Program list with program names and numbers - Extensive program memory - Individual selection of aggregates with functions for basic settings, set point values, position points, and tool corrections, as well as fixed position points - Setup operations for aggregates and axis settings centrally and clearly via fine adjustment (depending on equipment) - Interval display for minimum workpiece distance - Integrated position control - Position points generally or program-specifically controlled - Clear and complete capture of all operating data - Service messages in plain text - Diagnostic system - Incl. integrated synchronous bus system for high accuracy in aggregate control - Individual management for up to ten users, incl. password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 – Belt bridge Options and accessories for the base machine Spraying unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled separating agent spray unit with separating agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing milling unit 1961 and flat scraper 1964) Jointing milling unit Jointing milling station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) - With two plunge-controlled milling units - 1 unit counter-rotating - 1 unit co-rotating - Plunge depth 5 mm - With static frequency converter 200 Hz - Without milling cutters - With ProLock screw-in chuck for quick tool change Tooling for 1803 (workpiece height up to 60 mm): Diamond cutters PRO UT, 2 pcs. (front and rear) incl. protective hoods Ø 100–63 - Ø 30 mm, Z = 3 + 3 + 3, 1x LH, 1x RH Noise-reduced cutter with integrated chip guide, DFC technology (Leitz system) Maximum chip removal 2 mm at 60 mm height

Sąlyga: naudotas, Gamybos metai: 1986, from model making shop used, top condition, low running hours Make: Panhans Model: 325 Year of manufacture: 1986 GS-tested Motor: 4.0 kW Control panel on top Planing width approx. 510 mm Infeed table length approx. 1600 mm Outfeed table length approx. 1150 mm Auxiliary fence Slotted/low-noise table lips Number of knives: 4 Knife system: strip planing knives Chip thickness indicator Nwjdpfxowhqw No Ad Ujp Hollow-chamfer joint Automatic brake Hollow-chamfer joint adjustment Extraction port D 140 mm Space requirement approx. 2800 mm x 800 mm x 1200 mm Weight approx. 800 kg Location: 97447 Gerolzhofen, free loaded onto truck, unpacked Delivery as is, as inspected, without guarantee or warranty

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, HOLZ-HER Sprint 1329 - Naudota briaunų klijavimo mašina, geros būklės. - Pagaminimo metai: 2015 - Komplekte yra BARBARIC grąžinimo sistema (2017 m.) - Bus galima naudoti nuo 2025 m. lapkričio pabaigos/gruodžio pradžios Nsdsxducrjpfx Ad Uowp Kilus klausimų, prašome susisiekti.

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock F 2 Njdpfx Adslht Hzo Uowp The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure your workpieces are optimally prepared for edge banding. The standard configuration includes a jointing unit (up to 2 mm milling depth), top-mounted quick-heating glue pot, end trim saw, and combination milling unit. Optionally, the F 2 can also be fitted with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 - 10 m/min F2 Next Edgebander With PLC control (including touchscreen) and automatic glue application on the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change setup and glue discharge unit, high-frequency end trimming station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic height adjustment and interchangeable insert router (combination version), robust chain feed, ball-bearing double roller top pressure, inspection window at the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Carriage length: 3200 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 170 mm Scorer: yes Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Nwedpfxotnggyo Ad Uop Saw blade diameter: 500 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Extraction connection: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 900 kg

Sąlyga: naudotas, Gamybos metai: 2014, Used machine Year of manufacture: 2014 Features and technical data: - Control unit with 10.4" color touchscreen - Extendable workpiece support - Motorized, CNC-controlled pressure beam - Chain feed with feed speed of 12 m/min - Ball-bearing support disc, diameter 770 mm - Twin-motor jointing milling unit / 2 x 1.1 kW - Edge feeding for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) - Teflon-coated glue unit - Pre-melting unit for EVA adhesive - Exchangeable glue unit for EVA - Exchangeable glue unit for PU - Motorized, CNC-controlled pressure unit - Twin-motor cross-cut saw unit / 2 x 0.50 kW - Twin-motor multifunction unit for radius, flush, and chamfer milling / 2 x 0.75 kW Nwodpfx Adow Nadtj Uep - Corner processing unit - Radius scraper blade - Surface scraper blade - Twin-motor polishing unit (buffing) - Spray unit for release agent at the machine infeed - Spray unit for cleaning agent before the polishing unit Availability: short notice Location: 65439 Flörsheim

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Naudota briaunų užklijavimo staklė - OLIMPIC K 360 R - Pagaminimo metai: 2022 - Prieinama nuo 2025 m. lapkričio Nsdpoxhc Evefx Ad Uowp - papildomos nuotraukos/video prieinami