Panhans pasukama frezavimo mašina 245/20

Panhans 245/20

Būklė: naujas, Gamybos metai: 2024, Panhans Tilting Spindle Moulder Type: 245/20 Solid German engineering Table-mounted moulder with single-sided, fixed spindle for tilting range from -5° to +45.5° Positioning control for spindle height and tilt adjustment, including zero reset for height and offset travel Electronic position and speed displays 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-action belt tensioning device Push-buttons for spindle start and stop Left and right rotation Quick-release spindle clamp Finely planed grey cast iron table with fixed frame support Control panel mounted below on fixed frame support Fence 216 with total adjustment via handwheel and LCD display, including cast iron fence plates and aluminium chip breakers Integrated machine socket Lockable main switch Mechanical motor brake Moulder guard and pressure device GAMMA V 1629 Curve milling fence 1639 Tapoa Milling spindle 30 mm, non-interchangeable CE compliant Dusdpfx Asr Ig H Tsc Dsr GS certified Table size 1100 x 760 mm Table height 870 mm Spindle: Non-interchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Extraction ports 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light grey and RAL 5000 Violet blue Net weight approx. 800 kg Equipment: Upper control panel Tilting ±45 degrees 7.5 kW motor Centrex Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Apdirbimo centras Biesse Rover A 1542 Darbo laukas X: 4140 mm Darbo laukas Y: 1560 mm Darbo laukas Z: 245 mm 5 ašių elektros freza, HSK-F63 tvirtinimas Duodpfx Acoyh Nd Rj Djr Vertikalios gręžimo galvos: 17 Horizontalios gręžimo galvos X kryptyje: 6 Horizontalios gręžimo galvos Y kryptyje: 4 Diskinis pjūklas griovelio pjovimui 25 pozicijų įrankių keitiklis Darbo stalas su 8 sijomis

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Panel dividing system SCHEER FM 16 – DNC 3100 x 3100 As-new condition – Machine no. 33542 The SCHEER FM 16 is a high-performance, electronically controlled panel saw featuring state-of-the-art drive technology and intuitive controls. The machine has been completely overhauled and newly painted – its condition is virtually as new. Ideally suited for precise, automated cutting of wood-based materials in continuous industrial operation. Key technical data: Cutting length: 3100 mm Cutting depth / Blade projection: 80 mm Saw motor: 7.0 kW Scorer motor: 1.1 kW (can be switched off) Feed rate: 2 – 40 m/min (infinitely variable) Return: Rapid traverse, automatic lowering Control interface: SCHEERWIN, graphical, document-oriented (64-bit) on Windows 10 Drive system: Küenle frequency inverter with Stöber synchronous servo drives incl. absolute encoders – for maximum positioning accuracy and control dynamics Features & Highlights: Longitudinal panel saw FM 16-3100 with hardened guides and automatic forward/reverse travel HP 5021 material feed table with 6 clamp slides, servo drive & measurement resolution of 0.05 mm Angular pressure unit WP, adjustment range 2400 mm, fully automatic Offcut handling unit SP 5000 for offcuts down to min. 5 mm Angle stop table HP 5024 (1800 x 800 mm), steel angle with Pertinax overlay Workpiece support table HP 5025 (1800 x 800 mm), also with Pertinax overlay Air-cushion system in the front tables including radial fan Saw blades included: KSB 4005 for main saw (ø 305 mm, Z = 60) KSB 4006 for scorer (ø 200 mm) Condition & Service: Condition: Overhauled & as new Duodpsunwk Tofx Ac Djr Functionality: Fully operational Warranty: 12 months Reliability for continuous operation: This machine is used worldwide – even under extreme conditions. Whether in the dry climate of Africa or in high humidity regions of Southeast Asia (e.g., Thailand): The SCHEER FM 16 operates reliably in 3-shift systems – 365 days a year – and impresses with outstanding precision, stability, and durability. Guarantee: We are so convinced of the quality and robustness of our machines that we offer 7 years warranty on the machine construction and the guideways. (Electrical supply parts and wear parts excluded.) Flexibility & Customization: We offer various models and equipment options – for any budget. Furthermore, we realize custom, made-to-order solutions according to your individual requirements. 📞 Contact us for a tailored quote or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training available as options.

Būklė: geras (naudotas), Gamybos metai: 1981, Spindle moulder, spindle moulding machine, woodworking milling machine Dodpfjwnbfkox Ac Djur - Manufacturer: Martin, spindle moulder model T 21 with table extension - Milling spindle: 30 mm diameter arbor - Speeds: 3 rpm settings - Overall dimensions: 1620 x 1060 x H1120 mm - Total weight: 698 kg

Būklė: naudotas, Gamybos metai: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for up to 100 mm edging height! Condition: factory-checked by Lange Maschinenbau Features and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feeding synchronized with conveyor belt - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber overlay - Digital counter for height adjustment - Direct glue application to the workpiece: drip-free glue pot with glue reservoir from below and fast heat-up time after machine downtime - End trimming unit: - For workpiece front and rear edges - Automatic sensing on the workpiece - Pneumatic trimming with blade for cuttable edges - Flush-milling unit - With vertical tracing and horizontal guidance - Reproducible settings via digital counters - 2 powerful 0.4 kW high-frequency motors - Infinitely adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - Central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the top milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable edge tape reel Ø: 800 mm - Workpiece width: min. approx. 80 mm Dujdpfx Acewka S Ij Dsr - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without tape reel): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Būklė: naudotas, Gamybos metai: 2000, naudotas padavimo įrenginys Djdeumpp Eopfx Ac Deur Pagaminimo metai: 2000 tinka Kündig Uniq briaunų šlifavimo staklėms Techniniai duomenys: didžiausias išsikišimas: 1050 mm padavimo volų skaičius: 4 volo skersmuo: 120 mm volo plotis: 60 mm volo spyruoklės eiga: 25 mm greičių lygiai: 8 (2/4/5,5/6,5/11/13/16,5/33 m/min) variklio galia: 0,75 kW jungtis: 400V/50 Hz svoris: 32,5 kg Nuotraukoje matoma konsolė nėra įtraukta į pristatymo komplektą! Vieta: Flörsheim Prieinamumas: iš karto

Būklė: naujas, Gamybos metai: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min/Max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Dusdeg Tu Rkopfx Ac Dor Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointing unit Corner rounding unit, radius R = 2 mm Quick-change device for corner rounding unit Radius changeover motor EF R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spray Nesting Pneumatic 3-point adjustment Multi-function cutter (R2/R1/chamfer) Equipment for short workpieces

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool diameter 93-125 mm) Working height: 100 - 200 mm (with tool diameter 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindle: 1 Left spindle: 1 Top spindles: 2 Spindle arrangement: b-r-l-t-t-b Duedpfx Acsrq Ebfj Dsr Maximum spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Chamfering unit included Separate motor for each spindle Electronic feed with brake, infinitely variable 5-40 m/min Durofer spike-tooth feed rollers Short infeed table, 1.2 m long, with 2 powered rollers above the table Machine table surface with hard coating Manual lubricant pump WEINIG Comfort Set Control system: WEINIG MEMORY PLUS SYSTEM CE mark Declaration of conformity

Būklė: geras (naudotas), Tilting spindle moulder, table router, table milling machine Djdpfjh Nvyzex Ac Dour - Spindle adjustment: height and angle - Tilting range: -3° to 45° - Drive: 4.5/5.5 kW - Speeds: 3000/4500/6000/9000/12000 rpm - Power feed unit Holz-Her with 3 rollers - Useful spindle length: 100 mm - Spindle diameter: Ø 30 mm - Max. cutter diameter: Ø 220 mm - Dimensions: 1540/1100/H1520 mm - Weight: 962 kg

Būklė: naujas, Gamybos metai: 2026, For sawing, for example, stainless steel, tool steel, hollow profiles, and solid materials Two-pole drive motor enables band speeds of 30 and 65 m/min Duedog U Uv Ropfx Ac Djr Saw blade tension is monitored electromechanically via a microswitch When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking on the cylinder required Saw arm inclined by 25°, resulting in longer blade service life Precise and robust blade guides with adjustable carbide plates After completion of the cutting process, the saw band stops automatically in the lower end position Saw arm lowering by gravity or manually Infinitely variable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Material feed table height: 925 mm Cutting capacities 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular horizontal (hollow profile): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular horizontal (hollow profile): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular horizontal (hollow profile): 90 x 90 mm Art. No.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -