Apdirbimo centras - iškart prieinamas -

Biesse Rover Multi Up M C S

CNC Machining Centers Rover Multi Up M C S

Working area *:
X = 3280 mm;
Y = from 1580 to 1660 mm, depending on operating conditions
Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H=74 mm
Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H=29 mm
Workpiece clearance *: Y = 1900 mm
Axis travel distances *:
X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm

VACUUM SYSTEM
Vacuum system divided into 2 working areas and 2 clamping zones along X.
AUXILIARY VACUUM SYSTEM – 2 zones
Fedpfx Ajy Ehrxjn Hopn
Enables clamping of workpieces via vacuum templates.

Remote control RM850

Rover Multi Up M C S Panel – Multi Purpose Regular

Configuration 2
Compatible with the 16-position rotary tool changer and the 12-position lateral tool magazine.
The tool magazines can also be retrofitted.

Uninterruptible power supply (UPS) for the machine PC.

6 ATS workpiece supports – 18 module carriers
— 6 aluminum workpiece supports. The supports are guided via linear guides with recirculating ball bearing blocks. Clamping is performed at the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located on the front of the workpiece support.
— 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping
The vacuum modules can be rotated in 15° steps on the module carriers; ideal solution for shaped components.
— 18 sealing plugs for module carriers without template.

SA work table (Set-Up Assistant) for work tables up to 1550 mm.
Supported manual positioning system with travel direction indicator and position indicator.
— Sensors on each table and along the X axis of the working area.
— Indication of direction and achieved position for the carriage during positioning phase, mounted on each table
The system, according to the programming of the tables, suggests to the operator the movement direction for each table and carriage, confirming the position reached with a green LED and a beep with an accuracy of +/- 1.5 mm.

Subdivision of pneumatic system into 2 working areas along X.

Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm

Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle.

Flange prepared for mounting a 5-axis machining unit for aggregate installation.

Coolant system

Additional Z-axis carrier for rear machining units, with independent Z-axis.

Drilling head BH 24 L

Side-mounted tool magazine with 12 positions integrated in machine bed.

Rotary tool magazine with 16 positions, mounted directly on the X machining unit.

Tool holder HSK F63, equipped with a long integrated flange, for saw blades on 5-axis head.

Saw blade 300 mm, for tool holder.

Hi-Tech tool set
Complete set of tools for the acceptance test
Comprising the following 9 items

Replacement of standard PC with a high-performance PC.

Digital devices for measuring tool length up to 130 mm diameter.

bSolid

NC-HOPS 8 MacroCAM Rover 1. AV
NC-HOPS MacroCAM 1 license
WorkCenter vacuum cup proposal
5-axis simultaneous
Material removal simulation
12-month warranty period

Location: ex stock 54634 Bitburg
- immediately available -

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.