Būklė: geras (naudotas), Gamybos metai: 2011, spaudimo jėga: 160 t, Pressure: 160 t Minimum Support Distance: 550 mm Maximum Support Distance: 1,550 mm Max. Workpiece Width: 400 mm Cylinder Stroke: 450 mm Clear Width - Horizontal: 400 mm Total Power Requirement: 18.5 kW Machine Weight approx.: 13.5 t Space Requirement approx.: 3.65 x 1.7 x 1.62 m Additional Information: Hydraulic, horizontally-acting straightening and bending press Type: DZ 160 Gusdpszcc T Dsfx Ap Iec Press Force: 1,600 kN Adjustable from 0-1,600 kN Power Consumption: 18.5 kW Hydraulic Pressure: 245 bar Minimum Support Distance: 550 mm Maximum Support Distance: 1,550 mm 2 movable straightening beams for applying pressure and counterpressure Max. Workpiece Width: 400 mm Power Connection: 400/230 V, 50Hz N/PE Dimensions (LxWxH): 3,650 x 1,700 x 1,620 mm Machine Weight: 13,500 kg Hydraulic Unit (LxWxH): 1,700 x 800 x 1,400 mm Control Cabinet: 800 x 500 x 1,800 mm Kunkel hydraulic straightening and cambering presses are used in heavy steel construction for pre-stressing or straightening beams and profiles. Especially in modern high-rise steel construction, it is essential, for visual reasons, to camber structural components—to give them a slight convexity—so that, when under load, the impression of straight, horizontal contour lines is preserved. Kunkel machines stand out for their highest precision and economic efficiency. With this straightening press, the workpiece can be processed in both directions from a single straightening position. All straightening blocks are adjustable. Additionally, the machine features a mobile control panel.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1979, Iš karto prieinama iš vietos: Hidraulinė greitaeigė spaudė Lauffer Tipas EPT 25 Pagaminimo metai 1979 Patikrinta pagal UVV Spaudimo jėga 25 t Eiga 160 mm Gjdszcv Uhepfx Ap Iouc Montavimo aukštis 320 mm Išsikišimas 230 mm Stalas 500 x 360 mm Stūmoklis 250 x 210 mm Svoris 2 t Pavaros galia 7,5 kW Kaina 2 750 Eur—+ PVM, iš vietos

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1979, Iš karto prieinama iš vietos: Hidraulinė greitaeigė spaudė Lauffer Tipas EPT 25 Guedszcv Ubopfx Ap Ijc Pagaminimo metai 1979 Patikrinta pagal UVV Spaudimo jėga 25 t Eiga 160 mm Montavimo aukštis 320 mm Išsikišimas 230 mm Stalas 500 x 360 mm Stūmoklis 250 x 210 mm Svoris 2 t Pavaros galia 7,5 kW Kaina 2 750 Eur—+ PVM, iš vietos

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1977, Nedelsiant laisvas iš sandėlio: Hidraulinė dviejų kolonų tiesinimo presas Dunkes Tipas HDSR 75 Guodpfjzcv T Rsx Ap Ioc Pagaminimo metai: 1977 Spaudimo galia: 165 t 3 cilindrai, spaudimo galia kiekvienam: 75 / 65 / 25 t Stalas: 1500 x 500 mm Eiga: 350 mm Variklio galia: 3 / 15 kW Svoris: 6 t Kaina: 2.750 EUR – be PVM, atsiėmimas iš sandėlio

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1992, Iš karto laisva vietoje: Hidraulinė vieno stulpo spaudimo staklės Edelhoff Modelis: HEP 45 Pagaminimo metai: 1992 Staklės atitinka naujausius UVV saugos standartus Spaudimo jėga: 45 t Stalas: 1000 x 1000 mm Eiga: 300 mm Pavara: 7,5 kW Svoris: 6 t Guedpezcv Twsfx Ap Isc Viršutinės galvos 4 kreipiamieji varžtai yra sulūžę. Juos reikia išsukti ir pakeisti. Kitaip staklės veikia puikiai. Kaina – 3 000 Eur + PVM vietoje.

Būklė: geras (naudotas), Rankinė veržliaraktinė presas SAVOS GAMYBOS iš mokymo centro Guodpfx Ajzcqmlop Ioc Presavimo jėga apie 5–10 t Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Vokietija

Būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 13214814, Funkcionalumas: visiškai funkcionalus, galia: 11 kW (14,96 AG), įvesties srovės tipas: trifazis, spaudimo jėga: 250 t, paskutinio kapitalinio remonto metai: 2010, Įranga: dokumentacija / vadovas, Hidraulinė presa 250 T - visiškai veikianti, gamyba buvusi DDR, pavadinimas VEB Wema Zeulenroda Gusdpfezbyxnsx Ap Ijc

Būklė: naudotas, Gamybos metai: 1980, Techniniai duomenys: Spaudimas: apie 100 t Atstumas tarp stulpų: 500 mm Išsikišimas iki stūmoklio centro: 350 mm Įrengimo aukštis: 450+100 mm Stūmoklio eiga - min.: 26 mm Stūmoklio eiga - maks.: 152 mm Stūmoklio reguliavimas: galimas/possible mm Stūmoklio paviršius: 550 x 400 mm Tvirtinimo stalas: 1020 x 710 mm Bendras energijos poreikis: 10 kW Apytikslis mašinos svoris: apie 7 t Apytiksliai matmenys: Ilg.:2,0 x Pl.:1,7 x Aukšt.:3,2 m Guedpfx Aeu Nfhdsp Iec - be tempimo pagalvės Presa galima pademonstruoti.

Būklė: naudotas, Gamybos metai: 1979, Technical Details: Pressing force: 250 t Ram stroke: 40-160 mm Gusdpfx Apou Nfino Iec Throat depth: 545 mm Ram adjustment: 110 mm Table size: 1250x800x100 mm Maximum distance between table and ram: 670 mm Drawing force: 16 t Table height above floor: 1000 mm Ram clamping surface: 900x670x100 mm Clearance between uprights: 500x400 mm Total power requirement: 23 kW Approx. machine weight: 16.6 t Machine dimensions (LxWxH): 2.8x1.4x3.7 m Control cabinet dimensions (LxWxH): 1.15x0.6x2.1 m Drawing device: Ejector and blank holder force each 16 t Table with 4 parallel T-slots (1250x800x100 mm) Ram plate with 4 radial T-slots Accessories: - Steel plate 1170x860x80 mm

Būklė: naudotas, Gamybos metai: 1981, Technical details: Pressure: 250 t Ram stroke: 36...126 mm Throat depth: 400 mm Ram adjustment: 110 mm Ram clamping surface: 630 x 500 x 100 mm Installation height: 400 mm Gusdpfx Apou Nfklj Ijc Table size: 1000 x 750 x 100 mm Table height above floor: 1000 mm Total power requirement: 23.0 kW Machine weight approx.: 13.5 t Control cabinet dimensions (LxWxH): 1.1 x 0.7 x 1.3 m Machine dimensions approx. (LxWxH): 3.0 x 1.3 x 3.3 m Additional features: - Operation via two-hand control panel with foot pedal - 4 base plates Ø 220 mm

Būklė: naudotas, Gamybos metai: 1982, Technical details: Pressure: 16 t Stroke: 250 mm Throat depth: 270 mm Installation height: approx. 400 mm Table dimensions: 800 x 500 mm Bore diameter: Ø 50 mm Ram surface: 220 x 360 mm Ram pin hole diameter: Ø 40 mm Table height above floor: 970 mm Operating voltage: 380 V / 50 Hz Gjdpfxeu Nfmyj Ap Iouc Control voltage: 220 V / 50 Hz Total power requirement: 3.0 kW Machine weight approx.: 2.3 t Machine dimensions approx. LxWxH: 1.8 x 1.5 x 2.72 m High-Speed Hydraulic Press Press frame made from rugged welded steel construction. Operating mode selectable via switch: jog, two-hand, foot pedal, or continuous operation with feed. The press features a piece counter on the side. EMERGENCY STOP switch With stroke limitation Press force adjustable With overload protection (pressure relief valve) With cutting impact damping SICK optical safety light curtain is pre-installed (can be reactivated as an option) *

Būklė: naudotas, Technical Details: Pressing force: 40 t Throat depth: 365 mm Guedpfxou Nfuqo Ap Isc Distance table/ram: 800 mm Ram stroke – max.: 500 mm Ram return speed: 0.45 m/sec Ram advance speed: 0.10 m/sec Ram surface: 450 x 360 x 74 mm Table surface: 630 x 500 x 73 mm Table through opening: Ø 205 mm Table height above floor level: 720 mm Total power requirement: 13.0 kW Machine weight approx.: 3.2 t Machine dimensions approx. LxWxH: 1.7 x 1.1 x 3.0 m Additional technical features: - Overrun time: 443 ms - Overrun distance: 9 mm - Last machine inspection: May 2020, valid for 1 year

Būklė: naudotas, Technical details: Pressure: 0.9 t Installation height: table/ram top: 350 mm Throat depth: 295 mm Ram diameter: 40 mm Table size: 600 x 330 mm Height above floor: 935 mm Approx. machine weight: - t Approx. machine dimensions (LxWxH): 1.2 x 0.8 x 2.1 m Guodpfsu Nfw Sex Ap Ioc Ram holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, Type 1E1 HS299, Pressure 38 bar, Tank capacity approx. 50 liters One-hand operation

Būklė: naudotas, Technical Details: Pressure: 2 t Passage: see text mm Stroke: see text mm Pressing force: approx. 2 kN 5 arbor presses, all with 2 kN No. 2: Throat depth 105 mm; ram-to-table distance 95 mm; ram stroke 36 mm; table size L:120 x W:140 mm; weight 17 kg; dimensions L:270 x W:220 x H:420 mm Guodpju N Ay Rsfx Ap Ijc No. 3: Throat depth 90 mm; ram-to-table distance 190 mm; ram stroke 45 mm; pressing force 3 kN; ram height adjustment 150 mm with hand crank; table size L:120 x W:160 mm; weight 26 kg; dimensions without wooden base L:235 x W:160 x H:730 mm No. 4: Throat depth 80 mm; ram-to-table distance 220 mm; ram stroke 40 mm; ram height adjustment 150 mm with hand crank; table size L:110 x W:160 mm; weight 30 kg; dimensions without wooden base L:230 x W:180 x H:700 mm No. 5: Throat depth 80 mm; ram-to-table distance 220 mm; ram stroke 40 mm; ram height adjustment 150 mm with hand crank; table size L:110 x W:160 mm; weight 30 kg; dimensions without wooden base L:230 x W:180 x H:700 mm, incl. fixture No. 7: Throat depth 130 mm; ram-to-table distance: max. 95 mm; ram stroke 20 mm; table size: L:50 x W:80 mm; weight 17 kg; dimensions: L:330 x W:160 x H:380 mm, incl. punching fixture

Būklė: naudotas, Gamybos metai: 1985, Technical details: Punching force: 40 kN Required air pressure: 8 bar Adjustable ram stroke min. / max.: 6 - 50 mm Ram adjustment: 50 mm Gusdpfou Icwgex Ap Iec Stroke rate: 70 - 400 strokes/min Table size (LxW): 480 x 445 mm Die opening in table (LxW): 250 x 112 mm Run-down time: 80 ms at 450 rpm Ram clamping surface (LxW): 420 x 345 mm Ram bore: Ø 40 x 230 mm Operating voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Total power requirement: approx. 19 kVA (approx. 7.5 kW) Control cabinet weight: 0.3 t Machine weight approx.: 4000 kg 40t punching press without roller feed/strip line Control via control panel/two-hand operation Operation: manual / automatic

Būklė: naudotas, Technical Details: Pressure: 250 t Stroke: continuous idle 40 mm Ram stroke: adjustable 36 - 126 mm Ram adjustability: 110 mm Gusdpfx Apju N Ddwj Ijc Ram clamping surface: 630 x 500 (LxW) mm Clamping surface: 1000 x 750 x 100 mm Distance table/ram: 400-526 mm Through-hole in table: 400 x 360 mm Operating pressure: 0.6 MPa Ejector travel: 63 mm Throat depth: 400 mm Total power requirement: approx. 20.0 kW Control cabinet dimensions (LxWxH): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (LxWxH): 2.9 x 1.2 x 3.4 m - Two-hand operation - Control pedestal Accessories: - Base plate 2200 x 1500 x 40 mm

Būklė: naudotas, Techniniai duomenys: Spaudimas: 160 t Stūmoklio eiga: 32...140 mm Eigos dažnis: 50 eigų/min Įdėjimo gylis: 400 mm Montavimo aukštis: 400 mm Stūmoklio slankiklio reguliavimas: 100 mm Stalo matmenys: 1000x750 mm (be tvirtinimo plokščių) Stūmoklio paviršius: 850x630 mm Gedpfxju N Dfhs Ap Iouc Sriegio skylė: 400x360 mm Bendra galia: 15,5 kW Mašinos svoris apie: 10,5 t Matmenys (I-P-A): valdymo spintos – 1,06x0,6x2,0 m Matmenys (I x P x A): I:2,9 x P:1,25 x A:3,3 m - Galimas tiek vienkartinis, tiek nuolatinis darbas - 2 tvirtinimo plokštės (1200x760x90 mm ir 1200x760x70 mm, sriegio skylės Ø=300 mm) - Galimas valdymas koja arba ranka - Paskutinė patikra atlikta 2006 m. - 80A; suslėgtas oras 6 kp/cm²; alyvos tūris apie 30 litrų Vidinėje būklėje.

Gamybos metai: 2021, būklė: naudotas, Technical Details: Pressing force: 5 t Column gap: - mm Installation height: 60 mm Rated power: 8 kVA Table height adjustment: 60 mm Gsdpfx Aeyzzh Esp Isuc Compressed air: 6 bar Supply voltage: 400 V Electrical specification – Voltage/Frequency: 400/50 V/Hz Total power: 4 kW Machine weight approx.: 610 kg SERVO-MECHANICAL SPINDLE PRESS The machine is programmable! DESCRIPTION OF THE MACHINE 2 machines available MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. On the horizontal arm, there is a movable press table which can be manually shifted along linear guides. In the forward position, the table can be manually locked with a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. Only in this position can the press head be lowered using the two-hand control. On the control panel, there are two-hand buttons, an emergency stop button, table lowering button, and force selectors 1,2. The pressing force can be set using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves on the vertical arm of the press. It also runs on linear guides. The head is driven by a lead screw, which is powered by an electric motor with gearbox via pulleys and a toothed belt. The entire machine is mounted on a table made of aluminum profiles.

Būklė: naudotas, Gamybos metai: 2001, Techniniai duomenys: Godpjxna Uzsfx Ap Ieuc Spaudimas: 250 t Išsikišimas: 360 mm Atstumas tarp stalo ir stūmoklio: 800 mm Maksimalus stūmoklio eiga: 500 mm Stūmoklio grįžimo greitis: 390 mm/sec Stūmoklio eigos greitis: 450 mm/sec Hidraulinis slėgis: 280 bar Prisijungimo galia: 43 kW Darbinis greitis: 11–50 mm/s Darbinis slėgis: 20 MPa Bendras energijos poreikis: 20,5 kW Mašinos svoris apie: 17 t Mašinos matmenys (Ilgis x Plotis x Aukštis): apie 3,9 x 1,9 x 4,0 m

Būklė: naudotas, Technical Details: Pressure: 63 t Godovt Nvpepfx Ap Isuc Throat depth: 315 mm Ram adjustment: 60 mm Stroke adjustment: 70 mm Ram stroke: 10 - 105 mm Strokes: 71 - 140 strokes/min Strokes per minute: Single stroke: 45 / 50 strokes/min Clearance between side stands: 355 mm Installation height: 335 mm Table (W x D): 800 x 630 mm Passage opening in table: 400 x 130 mm Clamping plate (W x D): 616 x 85 mm Ram clamping surface (W x D): 450 x 280 mm Pin hole in ram: Ø 50 x 83 mm Total power requirement: 7.5 kW Machine weight approx.: 5.9 t Control cabinet dimensions (L x W x H): 0.86 x 0.30 x 1.3 m Machine dimensions approx. (L x W x H): Press: 1.42 x 1.8 x 2.6 m High-performance press with roller feeder/strip line and straightening machine Application: Suitable for series production Equipped with Servo Roller Feeder MINI: verified by manufacturer P/A GmbH, type SRF 220 - For strip width 220 mm - Feed rate 150 m/min - Operated via handheld device Straightening system: - Manufacturer Wanzke, type KS 150 - Max. entry width: 200 mm - 2 powered entry rollers - 4 powered straightening rollers (top), vertically adjustable approx. 30 mm - 5 powered straightening rollers (bottom), fixed, not adjustable Decoiler = custom-made: - Mechanical/manual - Max. outer diameter: Ø 1,500 mm - Max. inner diameter: Ø 300 mm - Max. width: 200 mm Roller storage: - Roller system with 9 roller rails with 53 rollers (Ø 25 x 25 mm)

Būklė: naudotas, Gamybos metai: 1983, Technical details: Pressure: 100 t Stroke: 20 mm fixed Strokes per minute: 55 Throat depth: 355 mm Ram bore: Ø 36 mm Table area: 900x640 mm Ram adjustment: 150 mm Ram clamping area: 500x415 mm Height above floor: 800 mm Maximum distance between table and ram: 390 mm Passage opening in table: Ø 330 mm Total power requirement: 11 kW Machine weight approx.: 7.5 t Machine dimensions (LxWxH) approx.: 1.46x1.58x2.57 m Transport dimensions (LxWxH): 1.9x1.6x3.1 m The press is supplied without machine control cabinet/electrical control unit. (Optional installation possible) Complete electric single drive for 3x 380 Volt, 50 Hz Belt and ram guarding Friction clutch and brake unit PRESSMATIC Gjdpfeu Nfizox Ap Ieuc

Būklė: naudotas, Gamybos metai: 1969, Technical Details: Pressing force: 40 t Throat depth: 220 mm Stroke: 10 - 120 mm Ram adjustment: 63 mm Strokes per minute: 160 spm Distance table/ram: 300 mm Table size (LxW): 440 x 620 mm Through hole in table: Ø 200 mm Ram clamping surface: 400 x 250 mm Machine weight approx.: 2.52 t Gjdpfxsu Nfkxo Ap Iouc Machine dimensions approx. (LxWxH): 1.5 x 1.2 x 1.3 m The table is fitted with a clamping plate: LxW: 440 x 620 mm with a central bore Ø 100 mm. A steel plate 380 x 325 x 27 mm is mounted on the ram. The press is equipped with two-hand operation.

Būklė: naudotas, Gamybos metai: 1981, Technical Details: Pressure: 30 t Column gap (WxD): 600/450 mm Installation height table/ram top: 650 mm Ram stroke: approx. 600 mm / highspeed strokes Table surface (LxW): 500 x 700 x Ø 60 mm Ram clamping surface: 650 x 800 mm Hydraulic pressure: 170 bar Gsdpfsu Nfmasx Ap Isuc Required air pressure: 4 - 6 bar Total power requirement: 11 kW Machine weight approx.: 2.0 t Machine dimensions approx. (LxWxH): 1.26 x 1.75 x 3.4 m Four-column press, hydraulic Trimming press Possible application: suitable for use as a deburring press Additional technical features: - Table opening 200x250 mm - Ram opening Ø 160 mm - Column clearance width 600 mm, depth 450 mm - Operation via control panel Equipment: - Safety guard - Base plates

Būklė: naudotas, Gamybos metai: 1997, Technical details: Pressing force: 160 t Column gap: 1000 mm Stroke: 250 mm Installation height: 600 mm Distance between table and ram: 600 mm Table height above floor: 550 mm Gsdpfju Nfmmjx Ap Ieuc Table surface: 810 x 860 mm Ram clamping surface (D x W): 720 x 580 mm with T-slots Total power requirement: 15 kW Approx. machine weight: 16.0 t The machine is not yet assembled. Pictures from the storage site. Further features: - Lateral opening (W x H): 520 x 620 mm - Front opening (W x H): 660 x 600 mm Equipment: - Walk-on platform = height above floor approx. 2400 mm; platform approx. 2700 x 2600 x 1050 mm - Hydraulic power unit - Oil cooler as per standard.

Būklė: naudotas, Gamybos metai: 1978, Technical Details: Pressure: 160 t Max. ram stroke: 500 mm Distance table/ram: max. 2880 mm Ram advance speed: 0.03 m/sec Ram return speed: 0.04 m/sec Ram area: W: 1720 x H: 1000 mm Ram diameter: Ø 259 mm Ram bore (center hole): Ø 180 mm Operating pressure: 260 bar Total power requirement: 11.0 kW Approx. machine weight: 18.8 t Gjdpfou Nfq Eox Ap Ijuc Approx. machine dimensions (LxWxH): 7.5 x 1.6 x 1.6 m HYDRAULIC HORIZONTAL MULTIPURPOSE PRESS TÜV inspection valid until 02/2024 Counter bearing specifications: Size (W x H): 1720 x 690 mm Counter bearing U-mount = Ø 225 mm x depth = 450 mm Manual horizontal adjustment: length max. 2880 mm Guide cylinder specifications: 2 opposing cylinders; size Ø 230 mm x length 3350 mm, 7 cylinders divided by adjustment slot Ø 170 x 50 mm, manually repositionable with adjustment ring Bed specifications: Steel construction, welded with 2 guide slots 20 mm; size (LxWxH): 4000 x 1400 x 200 mm