Dvigubos kolonos presas - hidraulinis

Edelhoff HZP 160

Būklė: naudotas, Gamybos metai: 1998, Pressure: 315 t Stroke: 500 mm Throat depth: 425 mm Installation height: 1000 mm Table surface: 1200 x 815 mm Table height above floor: 800 mm Ram surface: 1100 x 700 mm Downward speed: from 48 mm/s Return speed: up to 330 mm/s Working speed: 19 mm/s Oil capacity: 1600 l Drive power: 82.0 kW Hodevzxphopfx Ab Sjni Weight: 23.0 t Space requirement approx. 2.4 x 2.8 x 4.0 m (LxWxH) Approved for manual loading/unloading in accordance with CE standards Equipped with oil-hydraulic drive, pressure/time and stroke-dependent control, front light curtain (Sick), and two-hand operation

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, spaudimo jėga: 120 t, Here are the technical specifications of the offered machine: Technical Data & Information: • Press force: 120 tons • Idle speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Pressing speed (start): 5–15 mm/sec • Table size / heating plate size: 600 × 600 mm • Ram size / heating plate size: 600 × 600 mm • 2 electrically heated plates, up to 250°C – OPTIONAL • Overall dimensions approx. 2000 × 1000 × 2800 mm (height) • Oil temperature monitoring • Automatic lubrication • Free positioning of the ram • SICK/LEUZE light curtain 14.1 mm at the front • Circulation oil cooling • Pressure holding valve 0 to 1800 sec. • Rear door monitored • Pressure adjustment from 30 T to 120 T • Stroke limitation selectable by pressure or position • Program setup mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in cabinet • Two-hand operation • Machine body double coated • Signal light: Red – alarm, yellow – backphase, green – ready • Heating plates with electric heating rods, up to max. 250°C • Installation, commissioning, and training available at additional cost Thermal neutrality: 80–120°C Number of operator sides: 1 side Forces Maximum press force: 1,600 kN Maximum free tearing force: 200 kN Pressure build-up time (closed tool, steel on steel): max. 8 sec Dimensions Max. opening per compartment: 200 mm Stroke and min. opening per compartment: 400/200 mm Table height above floor, without heating plate: 850 mm Overall height above floor: approx. 2,800 mm Minimum hall height: 3,500 mm Parallel deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% occupancy: ≤ 0.2 mm/m Total weight of the press (without operating fluids): approx. 9 t Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3: max. 8 dB(A) Number of press cylinders: 1 pc. Maximum operating pressure: 240 bar Pressing pressure build-up time: 4 sec Pressure accuracy during press stroke: +/- 5 bar Main pump BOSCHREXROTH gear pump, approx. 48 L/min Oil volume: approx. HLP 46 MW 300 liters Ambient temperature: max. 40°C Oil temperature: max. 55°C Automatic pressure re-adjustment after 5% pressure loss. Pressure holding for up to 1800 sec. Electrics Main supply: 400 V AC control voltage Hydraulic pumps 24 V DC 24 V DC Frequency: 50 Hz Hydraulic main motor connection: 15 kW Total connection (excluding heating plates): 19 kW ##### If the press does not exactly meet your requirements, request a custom offer with just one click: Contact us for a customized quotation HIDROBRASIL manufactures presses exactly to your specifications at surprisingly affordable prices! Hedok S Dt Tspfx Ab Sjni Our core strengths are special-purpose machine construction and press automation. We offer custom-designed hydraulic presses, press brakes, and guillotine shears at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers.

Būklė: naudotas, Double-Column Hydraulic Press NEFF Type RHS 125 Z Hydraulic Deep Drawing Press Machine No. 3973 Year of manufacture: 1983 Pressing force: 125 tons Column width: 1050 mm Lateral column clearance: 550 mm Table surface: 1000 x 800 mm Ram surface: 1000 x 800 mm Ram stroke: 350 mm Maximum installation height: 750 mm Table height above floor: 960 mm Drawing cushion force: approx. 12 tons at 105 bar Drawing cushion stroke: 100 mm Table opening diameter: 202 mm Rapid advance speed downwards: approx. 360 mm/sec Rapid return speed upwards: approx. 360 mm/sec Working speed: approx. 36 mm/sec Oil tank capacity: approx. 1000 liters Main pump motor output: 22 kW Control pump motor output: 4 kW Control pump motor output: 2.2 kW Power supply: 400 Volt, 50 Hz - Hydraulic drawing cushion under the table with borehole through the tabletop, Ø 202 mm - Precise four-column guiding system at the ram corners - Infinitely variable pressing force adjustment - Electrically adjustable limit stop via hydraulic motor - Shearing impact damping system - Two-hand control panel for stroke activation at the press - Free-standing control cabinet (1600 x 500 mm) - Documentation such as operating manual, electrical circuit diagram, and PLC program printout available Space requirements of the press (L x W x H): 2600 x 2400 x 4270 mm Hnodeguvtlopfx Ab Sei Weight: approx. 14 tons In good condition

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2018, mašinos/transporto priemonės numeris: DF0151 - Rev.00, spaudimo jėga: 110 t, Pressure: 110 t Passage width: 800 mm Stroke: 500 mm Machine weight approx. (excluding operating fluids): 5 t Dimensions L x W x H: approx. 1950 x 1510 x 3145 mm Retracting force: 11 t Motor power: 20 kW Cylinder diameter: 200 mm Max. working height: 700 mm Advance speed max.: 195 mm/sec Pressing speed: 1 - 15 mm/sec Return speed: 5 - 140 mm/sec Travel distance: 500 mm Ram plate: 800 x 600 mm Ram plate thickness: 6 inches Table plate: 800 x 700 mm Table height above floor approx.: 900 mm Oil tank: 400 l Program memory: 200 programs Hnjdpfxsdxrqwe Ab Sei Siemens monitor: 10 inch Siemens control system: S7 1200 Light curtains by Schmersal: 700 mm Proportional valve for speed control from 5 to 195 mm/sec in advance, 1 to 15 mm/sec during pressing phase, and 5 mm/sec to 140 mm/sec in return stroke HMI pressure control for hydraulic cylinder capacity from 20 to 110 tonnes Siemens remote access for maintenance purposes Motor complies with IE3 energy efficiency according to CE standards

Gamybos metai: 1985, būklė: beveik kaip naujas (naudotas), Wanzke Hydraulic High-Speed Press SP/F12 Double-Column Press -WKG 499- Offered here is a hydraulic high-speed press manufactured by Wanzke. This press is in like-new condition! There are two presses mounted on a single stand. Technical Data: Manufacturer: Wanzke Type: SP/F 12 Press Force: 120 kN Return Force: 17.8 kN Overrun Time: 0.028 sec Year of Manufacture: 1985 Main Drive: 1.5 kW / 1.5 kW Mains Voltage: 380V 50Hz Hodohgiwnepfx Ab Sjni Control Voltage: 220V 50Hz Overrun Distance: 2.8 mm Safety Distance: 4 mm Strokes per Minute: Working Stroke: 10 mm/sec Rapid Stroke: 20 mm/sec Max. Stroke: 100 mm Table Size: 320 x 300 x 280 mm Accessories: Double decoiler type GMD1 Digital functional control “Tronic press” with full CNC upgrade capability. A total of 2 units are available!

Būklė: naudotas, Gamybos metai: 1996, Spaudimas 100 t Stovo plotis 1525 mm Hedpevuufxsfx Ab Seni Eiga 450 mm Atstumas tarp stalo ir slankiklio, didžiausia eiga viršuje, reguliavimas viršuje 850 mm Stalo paviršius 1500 x 1150 mm Traukos pagalvės spaudimas stale 30 t Traukos pagalvės eiga stale 150 mm Stalo aukštis virš grindų 940 mm Šoninis stovo praėjimas 480 mm Slankiklio paviršius 1500 x 1150 mm Alyvos kiekis 1200 l Svoris 25,0 t Užimamas plotas (PxGxA) 4,2 x 1,75 x 5,1 m Sick šviesos užuolaida Leidžiama rankiniam įdėjimui pagal CE standartą su alyvos hidrauline pavara, hidrauline traukos pagalve / stalo išstūmėju, hidrauliniu išstūmėju slankiklyje, hidrauliniu pjovimo smūgio slopinimu, mechaniniu gylio ribotuvu pamatų duobė nereikalinga 2025 m. – ruošiama: nauja valdymo ir saugos elektronika – Siemens S7-1500F, Patogus valdymas per lietimui jautrų ekraną Vaizdo įrašas prie tiekėjo prieš demontavimą galima peržiūrėti

Būklė: naudotas, Gamybos metai: 1990, Spaudimas: 160 t Eiga: 200 mm Išsikišimas: 500 mm Įrengimo aukštis: 500 mm Stalo paviršius: 1140 x 980 mm Stalo aukštis nuo grindų: 860 mm Kumštelio paviršius: 1000 x 800 mm Alyvos talpa: 1000 l Variklio galia: 50,0 kW Svoris: 18,0 t Užimamas plotas apie: 1,3 x 2,6 x 3,4 m Stalo pralaidos anga: 180 mm Pagaminimo metai: 1981 - modernizuota 1990 Leista naudoti rankiniam įdėjimui pagal Vokietijos nelaimingų atsitikimų prevencijos taisykles (UVV) Su alyvos hidraulinė pavara, slėgio/laiko ir eigos valdymu, hidrauline kirpimo smūgio amortizacija, mechaniniu gylio ribotuvu, dviejų rankų valdymu Galima pasiūlyti be paleidimo arba alternatyviai su nauja Siemens S 7-1500 F valdymo sistema Hnsdpfxjwvva Sj Ab Sei

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, bendras aukštis: 2 500 mm, stalo aukštis: 900 mm, presavimo greitis: 8 mm/s, spaudimo jėga: 50 t, bendras svoris: 2 900 kg, darbinis slėgis: 250 juosta, stūmoklio plokštės plotis: 498 mm, stalo ilgis: 522 mm, stalo plotis: 522 mm, įvesties srovės tipas: Oro kondicionierius, galia: 10 kW (13,60 AG), įėjimo įtampa: 400 V, atstumo lentelė iki stūmoklio: 600 mm, alyvos bako talpa: 130 l, darbinis greitis: 8 mm/s, Įranga: apsaugos šviesos užtvara, If the press does not exactly meet your requirements, you can request a customised offer tailored to your specifications with just one click: Contact us for an individual quotation Hidrobrasil manufactures presses exactly according to your requirements at surprisingly affordable prices! #### 50 T Top Ram Heating Press, double-column construction, suitable for continuous shift operation, with the following basic features: - With one heated level - Idle speed up to 10 mm/sec (adjustable by rotary knob) - Opening speed up to 40 mm/sec - Initial pressing speed 8 mm/sec - Table/heating plate size: 522 mm deep x 522 mm wide - Ram size/heating plate: 498 mm deep x 498 mm wide - 2 electrically heated plates, up to 200 degrees Celsius - Oil temperature monitoring - Hydraulic circuit oil cooling - Pressure holding valve: 0 to 3600 seconds - Pressure adjustment from 8 t to 50 t (50 t = 300 bar) - Stroke limitation selectable via pressure or position - Two-hand operation, adjustable or fixed - Machine frame double-coated - Signal tower: Red = alarm, Yellow = baking process, Green = ready - Heating plates with electric heating rods, up to max. 200°C - Installation, commissioning, and training available for a separate fee ### Technical Data ## Design - Type of press: Double-column press ## Thermally Neutral - Temperature range: 80 – 120°C ## Operating Sides - Number of operator sides: 1 side ## Forces - Max. pressing force: 500 kN - Max. stripping force: 20 kN - Pressure build-up time: max. 3 sec. (closed tool, steel on steel) ## Dimensions - Max. opening width: 600 mm - Stroke and minimum opening: 300/300 mm - Table height above floor with heating plate: 900 mm - Height above floor (installation height): approx. 2,500 mm - Required hall height: min. 3,500 mm - Parallelism deviation at 20°C: +/- 0.1 mm - Deflection: < 0.2 mm/m (measured at max. closing force with 70% usage) - Total weight of press without operating fluids: approx. 2.9 t - Accessories: 2 heating plates (522 × 522 mm and 498 × 498 mm, max. heating power) - Heating plates fitted with temperature sensors: up to 200°C ## Speeds - Fast closing: 10 mm/sec - Max. pressing speed: 8 mm/sec ## Sound Pressure - Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3: max. 78 dB(A) ## Hydraulics - Number of press cylinders: 1 unit - Max. operating pressure: 250 bar - Pressure build-up time: max. 3 sec. - Pressure accuracy during pressing stroke: +/- 5 bar - Main pump: BOSCHREXROTH gear pump, approx. 26 L/min Hnedpfxotwv S Nj Ab Ssi - Oil volume: approx. 130 litres (HLP 46 MW) - Ambient temperature: max. 40°C - Oil temperature: max. 55°C - Flow temperature: not specified - Automatic pressure adjustment after 5% pressure loss - Pressure holding for up to 3600 sec. ## Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic main motor connection: 7.5 kW - Total connection without heating plates: approx. 10 kW Description of the heating press: The Hidrobrasil heating press with a pressing force of 50 tonnes and a table size of 600x600 mm is designed specifically for industrial applications. It is an oil-hydraulic double-column press equipped with a sliding table mounted on spring-loaded rollers. This press is ideally suited for a wide variety of pressing processes, offering precise and reliable operation.