Vienos kolonos ekscentrinis presas

WMW BLEMA-GOTHA PEE II 160

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, bendras svoris: 35 000 kg, spaudimo jėga: 250 t, įvesties srovės tipas: trifazis, galia: 30 kW (40,79 AG), perforavimo jėga: 250 t, įėjimo įtampa: 200 V, Įranga: apsaugos šviesos užtvara, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Press Force: 160 t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Die Height (adjustable): 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30 kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Gtsdpou Dxb Tofx Abdot Automatic cutting oil dosing – RAZIOL EST-02 Optionally available with decoiler and straightening machine.

Gamybos metai: 1965, Sąlyga: naudotas, Pressure: 150 t Throat depth: 550 mm Stroke: 10 - 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Ram adjustment: 70 - 150 mm Gtedpfx Abecubatodst Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirement: approx. 3 x 1.7 x 3 m - with auxiliary brake - Ram weight compensation - Motorized ram adjustment - Centralized grease lubrication (manual) - Break-out plate - T-slot clamping plate - Safe for manual loading operations - Operating manual available

Sąlyga: naudotas, Gamybos metai: 1977, Pressure: 250 t Stroke: 40 - 190 mm Stroke rate: 40 /min Gtsdpfx Aevuuaiobdst Throat depth: 500 mm Clearance between frame sides: 1050 mm Installation height: 615 mm Table size: 1380 x 880 mm Pass-through opening in table: 450 mm Table height above floor: 800 mm Ram area: 1200 x 800 mm Ram adjustment: 125 mm Drive power: 22.0 kW Weight: 24.0 t Required floor space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Approved for manual feeding operations in compliance with German accident prevention regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, clamping plate, two-hand control.

Gamybos metai: 2006, Sąlyga: labai geros būklės (naudotas), 70 linear meters Pallet Rack SSI Schäfer Palflex incl. wire mesh decks Used equipment, good condition, see pictures Year of manufacture: 2006 Height: 4 m Depth: 120 cm Bay load: 12,000 kg Galvanized uprights Red beams Wire mesh decks included! 2 decks per 2.7-meter beam Asking price: € 6,950,-- net ex stock Gtodpfxskx E I Nj Abdot Offer includes: + 26 pre-assembled uprights, depth 120 cm, height approx. 4 m + 100 beams, length 2.7 m, 1,500 kg shelf load (evenly distributed load) + 200 locking pins + 100 galvanized wire mesh decks for 50 levels of 2.7 m beam length + 104 concrete anchors + Load capacity signs Stock item. Transport and installation available on request. Viewing possible by appointment at any time. Further information upon request. Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. (Technical data, information and prices subject to change and error. Sale subject to prior sale! See our T&Cs, all prices excl. VAT ex stock.) Purchase / Sale We are constantly looking for, or offering, numerous items from various sectors broom-clean clearances business liquidations Fast - flexible - all-in-one! We can also clear or dispose for insolvency administrators. Send us a quick note with your requirements and we will get back to you immediately. To visit our page, simply click on our logo!

Sąlyga: naudotas, Gamybos metai: 1970, mašinos/transporto priemonės numeris: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Passage opening in table: 240 mm Passage opening in clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Gedofx Hv Hspfx Abdstt Single-column eccentric press with tiltable design via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or underneath (360 x 160 mm), centralized lubrication via hand pump, additional clamping plate (700 x 480 x 850 mm), two-hand operation, foot release configurable, mode selector switch for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1980, Presavimo jėga: 300 t Stalo dydis: 1.200 x 850 mm Iškyša: 400 mm Stūmoklio plotis: 1.100 mm Anga stale: 400 x 250 mm Įmontavimo aukštis: 500 mm Smūgių skaičius: 32 1/min Eigos ilgis: 30 - 140 mm Gtjdpfx Abed A Hbcedet Stūmoklio reguliavimas: 105 mm Svoris: apytiksliai 19.500 kg Kita - Patvirtinta rankiniam įkrovimui - Su Herion Xsz 20 saugos vožtuvu - Motorizuota centrinė tepimo sistema - Pneumatinis stūmoklio svorio subalansavimo cilindras - Motorizuotas stūmoklio reguliavimas - T formos grioveliai stūmoklyje - Laisvai pastatomas valdymo pultas - Perdirbti švaistiklio guoliai Apsauginiai dangteliai pavaros dantračiui, be abejo, yra – žr. antrą nuotrauką.

Sąlyga: naujas, Press pressure: 40 t Reach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Gtjdpfx Ajb U Hwmobdet Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Through-hole in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination by Ortlinghaus - Central lubrication by Vogel - Cam controller by Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Sąlyga: naudotas, CNC press brake AMADA model HFBO 50 x 2000 Serial no. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes – CNC control Operateur II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Throat depth: 420 mm Distance between side frames: 1660 mm Maximum tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Power supply: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operateur II, Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2 - 2 freely programmable back gauge fingers, adjustable laterally and in height (Z1+Z2+R1+R2) Gsdpfx Asw Iq Ugebdjtt - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric footswitch and/or two-hand control panel - Mechanical lever-type tool clamping for the top tool (5 pcs AMADA Expert, 5 pcs UKB 50.667 H=120 mm) - Tool holder for the bottom tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - comprising: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) - 2-piece lower tool, 88° - V 8, total length 1250 mm - comprising: 1x 835 / 1x 415 mm - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Sąlyga: paruoštas naudoti (naudotas), Pressing force: 1600 kN, throat depth: 450 mm, installation height: 560 mm, ram stroke: 8–160 mm, control system: SCHMERSAL SEPG 05.3.2.0.22/95, weight: 16.2 t, including documentation. Godpfshz Ua Sex Abdstt

Sąlyga: naudotas, Gamybos metai: 2003, Pressure: 250 t Gtjdpfjvuun Tox Abdjt Stroke: 20 - 190 mm Strokes per minute: 25 - 140 Throat depth: 460 mm Clearance between frame uprights: 590 mm Shut height: 690 mm Table size: 1500 x 880 mm Pass-through opening in table: 950 x 250 mm Table height above floor: 900 mm Ram area: 870 x 725 mm Ram adjustment: 120 mm Drive power: 30.0 kW Weight: 32.0 t Space requirement approx. 2.34 x 2.38 x 3.99 m (L x W x H) Approved for manual loading operations and automatic operation in accordance with CE standards Equipped with infinitely variable drive, safety light curtain (manufacturer: Sick), hydraulic clutch/brake combination, hydraulic overload protection in the ram, automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, fixed table, pneumatic drawing cushion in the table (20 t), motorized central lubrication, operator panel with two-hand control Clear space between tie rods: 940 mm Side opening: 900 mm