Ekscentriškas spauda - vienas stulpelis

AMBOLD PEEV 40.3

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, veikimo valandos: 158 h, rankos pasiekiamumas: 1 300 mm, Sveiki, Pjdpfx Adop E T N Aezjpt parduodame demonstracinį UR10e robotą, kuris buvo naudotas koncepciniam tyrimui, tačiau vėliau šio tyrimo atsisakyta.

Gamybos metai: 1965, būklė: naudotas, Pressure: 150 t Throat depth: 550 mm Stroke: 10 - 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirement: approx. 3 x 1.7 x 3 m Pjdpfx Aecubatodzjpt - with auxiliary brake - Ram weight compensation - Motorized ram adjustment - Centralized grease lubrication (manual) - Break-out plate - T-slot clamping plate - Safe for manual loading operations - Operating manual available

Būklė: naudotas, Gamybos metai: 1970, mašinos/transporto priemonės numeris: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Passage opening in table: 240 mm Passage opening in clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Psdpfxjfx Hv He Adzjpt Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable design via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or underneath (360 x 160 mm), centralized lubrication via hand pump, additional clamping plate (700 x 480 x 850 mm), two-hand operation, foot release configurable, mode selector switch for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2021, veikimo valandos: 95 h, keliamoji galia: 200 kg, kėlimo aukštis: 13 000 mm, statybinis aukštis: 2 100 mm, kuro tipas: elektrinis, pavaros tipas: Elektro, Lanksti teleskopinė platforma Ppsdevky D Sepfx Adzjt Techninė būklė: labai gera Priekinių padangų tipas: masyvios gumos Priekinių padangų dydis: 600x190 Galinės padangos tipas: masyvios gumos Galinės padangos dydis: 600x190 Akumuliatoriaus įtampa: 48V CE sertifikatas,

Būklė: naudotas, Gamybos metai: 1989, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 24 / 48 Throat depth: 500 mm Ppodpfxsvut Ncj Adzst Gap between side frames: 1000 mm Shut height: 615 mm Table size: 1400 x 880 mm Table opening: 450/500 mm Table height above floor: 800 mm Ram area: 1380 x 620 mm Ram adjustment: 125 mm Drive power: 29.0 kW Weight: 27.0 t Space requirement approx. 2.0 x 2.6 x 4.1 m (L x W x H) Approved for manual feeding operations in accordance with German accident prevention regulations (UVV). Features include pole-changeable motor, pneumatic clutch/brake combination, hydraulic ram overload protection, pneumatic ram weight compensation, motorized ram adjustment, semi-automatic stroke adjustment, motorized central lubrication, two-hand operation. The machine can be inspected under power at our warehouse.

Būklė: naujas, Gamybos metai: 2024, spaudimo jėga: 175 t, darbinis plotis: 3 050 mm, For sale is a powerful DURMA press brake, model AD-S 30175, which is perfectly equipped for demanding tasks in metalworking thanks to its comprehensive standard features and selected options. Standard features: - Capacity and size: 3050mm x 175 tons - Installation height: 530mm - Throat depth: 450mm - Stroke: 265mm - Axis control: Precise control with 4 axes - Safety systems: Manuel F. AKAS FPSC safety system, CE F.AKAS BVLT light curtains and safety enclosures provide maximum protection - Backgauge: Servo motor backgauge with linear guideways and ballscrew system for maximum precision - Tool clamping system: European standard for fast and secure tool changes - Front supports: Adjustable, supporting the handling of various workpiece sizes Selected options: - Control unit upgrade: SKY 22 - 3D, for even more detailed bending operations and 3D visualization - Crowning: Motorized adjustment for even more precise bending results - Backgauge: Extended with motorized X and R-axis backgauge (X=650mm), increasing flexibility and precision - Quick clamping: Manual quick clamping for more efficient tool changes This DURMA press brake is ready to support your production with its advanced technology and reliable performance. It is the ideal choice for companies that value precision, efficiency, and safety. Pedorx Rkujpfx Adzspt For further information or if you are interested, please contact us. Don’t miss the chance to enhance your manufacturing capabilities with this high-quality machine.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side Ppjdpfoh Ek Daox Adzet - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: naudotas, Pressure: 55 t Throat depth: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Strokes per minute: 120 spm Ram adjustment: 55 mm Ram area: 290 x 210 mm Ram bore: 40 H7 mm Pass-through opening in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Pjdpfscp Apyox Adzopt Machine weight: approx. 3.4 t Space requirements: approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Vogel central lubrication system - Balluff cam switchgear - Height-adjustable table - Mechanical ram overload protection (shear plate) - Control cabinet with touchscreen - Foot switch

Būklė: naudotas, Gamybos metai: 2009, Spaudimas: 40 t Eiga: 4–100 mm Eigos dažnis: 130 /min Iškyša: 230 mm Podpsvzxpnjfx Adzopt Montavimo aukštis: 475 mm Stalo matmenys: 650 x 460 mm Skylė stalo centre: 205 x 165 mm Stalo aukštis virš grindų: 710–950 mm Reguliuojamas stalas: 240 mm Stūmoklio paviršius: 435 x 240 mm Stūmoklio reguliavimas: 85 mm Pavaros galia: 5,0 kW Svoris: 2,6 t Reikalinga erdvė: apytiksliai 1,2 x 1,7 x 2,3 m Įranga: variklis, hidraulinė sankabos/stabdžio kombinacija, mechaninė apsauga nuo perkrovos stūmoklyje, rankinė eigos reguliacija, rankinė stūmoklio reguliacija, motorizuotas centrinis tepimas, reguliuojamas stalas, dviejų rankų ir kojinis valdymas.

Gamybos metai: 2002, būklė: naudotas, Diameter: 180 mm Workpiece length: 0 mm Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Ppsdot Hw Shjpfx Adzet Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice