Vienos kolonos ekscentrinis presas

WMW ERFURT PEE 400-I

Būklė: geras (naudotas), Gamybos metai: 2000, stalo plotis: 1 000 mm, stalo ilgis: 1 800 mm, stūmoklio plokštės plotis: 600 mm, bendras ilgis: 25 000 mm, bendras plotis: 27 000 mm, bendras aukštis: 47 000 mm, bendras svoris: 43 000 kg, štampo pagalvėlės eiga: 200 mm, Control system Siemens Simatic OP 27 Nwodpstiwgisfx Af Ujf Light barrier by Sick Separate control cabinet by Rittal Side walkways/passages Floor-level installation

Būklė: naujas, Table width 3000 mm Table length 1500 mm Torch heads 1 Control CNC Feed rate 20,000 mm/min Total power requirement 15 kVA Space requirement approx. 4.5 x 2.5 m * Heavy machine bed with precision guides for smooth machine travel * Cross carriage with ball bearings, offering height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting area ensures maximum precision * Automatic height detection and torch height control during cutting * Torch holder with collision protection and automatic shut-off in case of collision * Installation or relocation of the machine possible via plug & play method using forklift, pallet truck, or crane * 3-sided access to cutting area thanks to cantilever design SATOTEC Extraction Table: The SATOTEC table system features a robust table construction for a maximum cutting thickness of 150 mm. For cutting workpieces up to 150 mm thick, oxy-fuel cutting technology is required. The workpiece support frame is equipped with replaceable 3 mm flat-bar slats, mounted at a 45° angle. The spacing between the slats is 50 mm. Power Source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, can be increased with ProPierce Technology * Marking, grooving, and scribing of coated metallic materials * Inverter power source with digitally managed, fully electronic process cycle * Integrated cooling system with semi-automated filling and draining Nwedpfx Afepm U U No Ujf Gas Control: Fully automatic, processor-controlled plasma universal gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction System TEKA EcoCube 5.5 kW Filter medium: dry, fat-free or oil-free dust / fumes Filter area: 100 m² (4 cartridges @ 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (per BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz Current consumption: 11.5 A Voltage type: 3Ph+N+PE Fan installation: on the unit, incl. silencer duct bend, right side Motor control: frequency inverter Noise level: 75dB(A) + max 10 dB(A) during cleaning pulse Intake nozzle: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: light grey - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Closing hooks and toggle latches - Compressed air connection and condensate drain each fitted with cable gland - Compressed air connection with hose nozzle d=8mm - System equipped with grounding bolt - Cables in UL version - EATON frequency inverter installed on the left in attached control cabinet

Gamybos metai: 1965, būklė: naudotas, Pressure: 150 t Throat depth: 550 mm Stroke: 10 - 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Nwsdecubatspfx Af Ujf Space requirement: approx. 3 x 1.7 x 3 m - with auxiliary brake - Ram weight compensation - Motorized ram adjustment - Centralized grease lubrication (manual) - Break-out plate - T-slot clamping plate - Safe for manual loading operations - Operating manual available

Būklė: naudotas, Gamybos metai: 2003, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 25 - 140 Throat depth: 460 mm Nsdpfx Afjvuun Ts Uswf Clearance between frame uprights: 590 mm Shut height: 690 mm Table size: 1500 x 880 mm Pass-through opening in table: 950 x 250 mm Table height above floor: 900 mm Ram area: 870 x 725 mm Ram adjustment: 120 mm Drive power: 30.0 kW Weight: 32.0 t Space requirement approx. 2.34 x 2.38 x 3.99 m (L x W x H) Approved for manual loading operations and automatic operation in accordance with CE standards Equipped with infinitely variable drive, safety light curtain (manufacturer: Sick), hydraulic clutch/brake combination, hydraulic overload protection in the ram, automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, fixed table, pneumatic drawing cushion in the table (20 t), motorized central lubrication, operator panel with two-hand control Clear space between tie rods: 940 mm Side opening: 900 mm

Būklė: naudotas, Gamybos metai: 1983, Technical details: Pressure: 160 t Throat depth: 360 mm Ram stroke - max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Nwjdpou Nfvujfx Af Uof Pass-through opening in table: 4x Ø 62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram area: 450 x 850 mm Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Manual counter i.e. *

Būklė: naudotas, Gamybos metai: 1970, mašinos/transporto priemonės numeris: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Nedpfxsfx Hv Hs Af Uswf Clamping plate: 700 x 480 mm Passage opening in table: 240 mm Passage opening in clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable design via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or underneath (360 x 160 mm), centralized lubrication via hand pump, additional clamping plate (700 x 480 x 850 mm), two-hand operation, foot release configurable, mode selector switch for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Būklė: geras (naudotas), Gamybos metai: 1995, mašinos/transporto priemonės numeris: 0540/98, Funkcionalumas: visiškai funkcionalus, Seriennummer: 0540/98. Baujahr: 1998. Presskraft: 400 Tonnen. Hublänge: 300 mm. Hubzahl: 10–40 Hübe/min. Stößelverstellung: 300 mm. Einbauhöhe: 700 mm. Tischabmessungen: 1600 x 1300 mm. Eigengewicht: 45 Tonnen. Nsdoicbbzspfx Af Uewf Ständeröffnung: 1600 mm. Außenmaße: 2 x 3 x 6 Meter. Steuerungssystem: MEAB. Bandzuführung / Richtmaschine: iRON RNE 50B / 11. Abwickelhaspel: iRON SA6000, max. 700 mm.

Būklė: naudotas, Gamybos metai: 2000, Table length: 1160 mm Table width: 710 mm Clearance: 650 mm Control: WENZEL ME 5007 Total power requirement: kW Machine weight approx.: 800 kg Space requirements approx.: m W E N Z E L CNC-controlled vertical 3D coordinate measuring machine Nwsdpfx Aet Hw S Ijf Usf Model: LH 54 CNC, Year of manufacture: 2000 Regularly maintained and calibrated by the manufacturer _____ Y-axis configured as a longitudinally movable measuring portal: 600 mm X-axis as a transverse measuring head carriage: 500 mm Z-axis as a vertical measuring spindle approx.: 400 mm Max. workpiece weight / table load approx.: 200 kg Clearance under the measuring portal approx.: 650 mm Usable table size approx.: 1,160 x 710 x 160 mm Table height above floor approx.: 850 mm Machine height approx.: 2,300 mm Weight approx.: 800 kg Special features / Accessories: • Machine delivered with increased accuracy • Measuring table, traverse, and spindle made of dark natural granite; table with 3 x 4 threaded holes for attaching workpieces/fixtures • All axes are air-bearing, providing smooth operation and virtually wear-free mechanics, equipped with incremental scales with 0.0005 mm resolution • WENZEL CNC Control Type ME 5007 for 3 to 6 axes with ME 4700 movable hand control console with 2 joysticks for accessing all software functions. Ideally equipped for: • WENZEL measuring software METROLOG–II Level 2 for standard geometry measurements, 3D graphical workpiece representation, graphic reports, etc. Including keyboard • RENISHAW control unit Model PHC 10–2 suitable for • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° steps) Model PH 10 T with 5-way probe system Model TP 200 and various probe accessories, incl. RENISHAW Probe Interface PI 200 • Automatic probe change possible, 6-position probe magazine Model SCR 200 mounted on the table • Reference sphere for table setup, work table with console, various clamping devices • Various cassettes and CDs with various software. Separate PC for measuring software, printer Condition: Very good – generally in stock under power, available for inspection and demonstration. Dismantled by a specialist and reassembled here. Delivery: ex stock – as is, as inspected Payment: Net – upon receipt of invoice.

Būklė: naudotas, Gamybos metai: 2007, Pressure: 100 t Stroke: 500 mm Table dimensions: 900 x 600 mm Rapid traverse: 22 mm/s Stroke speed: 2 mm/s Ram surface: 700 x 350 mm Total power requirement: 2.2 kW Machine weight approx. 1.6 t Nwedpfx Afevprv Rj Ujf Space requirement approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press This machine is an Italian-made SICMI model, which was distributed by Knuth.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Hydraulic synchronized press brake MECOS Mod. Syncro 200/4000. ESA KVARA CNC control. Nwedpfov S Ad Rex Af Ujf Number of controlled axes: 07 (Y1-Y2-X-R-Z1-Z1-Z1). Automatic WILA crowning table. Pneumatic tool clamping: Promecam type, Tecnostamp H=150 mm. Useful bending length: 4050 mm. Pressing force: 200 tons. Front safety system: DSP LASER. Weight: 24,000 kg.