Vienos kolonos presas - hidraulinis

HANS SCHOEN SH-C 16

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Fpedpefxyhfsfx Ahwsd Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25.12.15, Fresan FP 100P - C-Frame Eccentric Press - 100 Tons (1000 kN) TECHNICAL DETAILS: * Capacity: 100 tons (1000 kN) * Strokes per minute: 60 SPM (adjustable) * Table to slide distance: 445 mm * Stroke adjustment: 0 - 132 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD FEATURES: * Equipment compliant with CE regulations * Welded steel frame construction Fsdpenxh T Rofx Ahwspd * Crankshaft made of alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * Bronze bearings quality SnBz-12 * Pneumatic clutch-brake combination * Fully enclosed, oil-lubricated helical gear drive * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) * Six-point slide guidance with waste oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate via AC inverter * Motorized slide adjustment * Mechanical overload protection (Hydraulic safeguard can be retrofitted to a standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & waste oil collector (spindle oil / slideway lubricant) OPTIONAL EQUIPMENT: * Additional clamping plate * Part ejector (upper and/or lower, mechanical or pneumatic) * Material feeding, loading and unloading systems (decoiler / uncoiler, straightener, pneumatic or servo feed unit) * Custom-engineered machine

Būklė: naujas, Technical specifications for pallet racking beam: Fjdpfx Aolwkwdjhwopd Racking system: Stow Type: Pal Rack NS Scope of delivery includes: 01x Pallet racking beam, new Material colour: RAL 2004 orange Box profile: 130 x 50 x 1.5 mm Beam type: PNB0413 S355MC Connector: 4 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 3,000 kg with evenly distributed load 02x Safety pins, new Version: fully galvanized For securing the longitudinal beams against accidental removal

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1983, Press force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 - 120 mm Installation height: 450 mm (maximum stroke, top position) Ram reinforcement: 100 mm Table size: 850 x 810 mm Pass-through opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guidance Fpedogpxc Sepfx Ahwsd - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Gamybos metai: 2003, būklė: naudotas, Pressure 100 t Stroke 10–130 mm Strokes per minute 30–90 spm Throat depth 330 mm Ram adjustment 100 mm Table surface 950 x 660 mm Ram surface 540 x 440 mm Table pass-through opening Ø 230 mm Table height 1000 mm Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Fpedpfx Ahjra Rr Ejwsd Pneumatic clutch-brake combination Press control Beutler Datatech Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot pedal operation GSW straightening and feeding machine VRMA 40/78, year 2003 Feed control HDS 50 BSA decoiler NO20/400V-AP

Būklė: naujas, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height: 95–240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver full pressing force across the entire stroke length. They are primarily used when long-stroke components must be processed with constant force. Convincing technology - Long and precise spindle guidance for maximum dimensional accuracy - Hardened and ground piston rod for virtually unlimited service life - Double-acting cylinder with end position cushioning on both sides - Dual guide rings in the piston for consistent, smooth operation - Oil-resistant sealing elements Key features of the PND series - Spindle secured against rotation - On the PND 85/S, spindle return is only via a single cylinder chamber for additional air saving - Working height fine adjustment is simple, quick, and precise in two stages: – Basic adjustment by simply loosening the clamping screws on the column – Precision fine-tuning via the stroke limit ring on the piston rod Additional advantage: Fpsdpfofv Awaex Ahwsd Faster cycle time and reduced air consumption

Būklė: naudotas, Gamybos metai: 2007, Pressure: 100 t Stroke: 500 mm Table dimensions: 900 x 600 mm Fpodpjvprv Rofx Ahwod Rapid traverse: 22 mm/s Stroke speed: 2 mm/s Ram surface: 700 x 350 mm Total power requirement: 2.2 kW Machine weight approx. 1.6 t Space requirement approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press This machine is an Italian-made SICMI model, which was distributed by Knuth.

Gamybos metai: 1979, būklė: naudotas, Press force 160 t Clearance between columns 850 mm Stroke 400 mm Ram area 800x700 mm Ejector stroke 300 mm Ejector force 20 t Table area 800x700 mm Fpedpfx Aslp Uz Rehwod Total power requirement kW Machine weight approx. 12 t Space requirement approx. 1800x1800x4200 mm Sick BWS for safety and cycle operation Blow-off Ejector Mechanical fixed stop Stroke-pressure cut-off Pressure dwell time Approved for manual loading/unloading operations

Būklė: labai geros būklės (naudotas), Gamybos metai: 1990, Pressure: 25 t Outreach: 160 mm Installation height: 500 mm Table size: 650 x 650 mm Ram surface (round): 140 mm Stroke: 130 mm Power requirement: 4 kW Weight: 2000 kg Height: 2100 mm Fpjdpefcw Apsfx Ahwod Width: 1100 mm Depth: 1500 mm

Būklė: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating energy: 1370 Nm Single stroke energy: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Passage opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Passage opening in table: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table Fedpfxeb U Hwnj Ahwjpd - Control cabinet with touchscreen - Foot switch