Portalo frezavimo staklės

Styrotec FS10 ST

Sąlyga: naudotas, rida: 274 630 km, galia: 225 kW (305,91 AG), pirmoji registracija: 06/2005, kuro tipas: benzinas, spalva: juodas, pavaros tipas: automatinis, sėdimų vietų skaičius: 2, Įranga: autonominis šildytuvas, centrinis užraktas, elektroninė stabilumo programa (ESP), navigacijos sistema, oro kondicionavimas,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Control: Fanuc 21T Turning diameter: 158 mm Ljdpfx Aewmzhpef Ijhb Swing diameter over bed: 340 mm Spindle speed: 6,000 rpm 8-position turret Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Wide range of tool holders

Sąlyga: geras (naudotas), Gamybos metai: 2009, padavimo ilgis X ašis: 6 000 mm, padavimo eiga Y ašimi: 3 000 mm, padavimo ilgis Z ašis: 1 500 mm, valdiklio modelis: HAIDENNAIN, ruošinio ilgis (maks.): 6 000 mm, ruošinio plotis (maks.): 2 500 mm, stalo plotis: 6 000 mm, stalo ilgis: 2 500 mm, Gantry milling machine with 5-axis head Ljdevcqybspfx Af Iehb

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, Įranga: 1 važiuoklės įtraukimas dešinėje 1 ekscentrinė presė 250 kN 4 standartiniai važiuoklės agregatai 1 siauras važiuoklės agregatas Ledsr D N Eqjpfx Af Iohb Darbinė sritis: Vielos storio diapazonas: iki 6,0 mm Juostos plotis: iki 80 mm Pritraukimo ilgis: iki 520 mm Galingumas: 10 - 250 vnt./min.

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C (NEW) Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: - Machine No. 90-1495 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse taper 3 Lhjdpfx Afsvambcs Isb - Feed rates from 0.015 to 0.46 mm/rev - Possible threads: Metric, Imperial, Module and Diametral Pitch - Metric thread pitches from 0.18 to 28 mm - Weight approx. 1100 kg - Spindle brake engageable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: - 3-axis digital readout by K&C, new, with 12 months manufacturer warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving function, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal, - Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments - 160 mm 3-jaw chuck with two sets of jaws, NEW - Multifix quick change toolpost, size A, with 2 new tool holders - Bed stop - Electric chuck guard, NEW - LED machine lamp, NEW - Rear splash guard - Operating manual - Coolant system - Machine feet About the machine: Offered is a Weiler Condor B lead and feed screw lathe, geometrically overhauled and in as-new condition. The guideways have been reground or newly hand-scraped. Supplied with a certified inspection protocol. A very attractive machine with electronic spindle protection. The accessories — collets, chuck, and Multifix — are new. Spindles, nuts, bearings, belts, and wipers have been renewed. You are welcome to inspect this machine under power at our premises and see its condition for yourself.

Sąlyga: naudotas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: 119, Ref. No. 24217 Technical Specifications: Lodpfx Aetpnplsf Ijhb - Max. working width: 2520 mm - Max. material thickness at 40 kp/mm² tensile strength: 3.5 mm - Adjustable bending angle (pre-selectable) - Upper beam drive: 400 V / 1.1 kW - Bending beam drive: 400 V / 4.0 kW - Required space: approx. W 3900 x H 1550 x D 1200 mm - Weight: approx. 4500 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Lhjdpfxjw Rl S Ss Af Ijb Tool clamping: hydraulic !!! Spindle completely overhauled at the end of 2024 !!! Drives for linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X-, Y-, Z-axis: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Color Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - Three-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. Machine still connected to power and immediately available.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Naudojama didelio formato CNC štampavimo staklės TRUMPF 500R (1600 mm gerklė), parduodama TRUMPF TRUMATIC T500R didelio formato rotacinės CNC štampavimo staklės Ši staklė apdoroja 3 m x 1,5 m lakštą be papildomo pozicionavimo. Trumpf UK specifikacija: Gamintojas: TRUMPF Modelis: TRUMATIC 500R Tipas: CNC štampavimo staklės Valdymas: Bosch CC220 Štampavimo jėga: 22 tonų (220 kN) Lsdstltl Hepfx Af Iohb Galima naudoti daugiaįrankę galvą. Trumpf TC 500R revolverinė štampavimo staklė, 3000 x 1500 mm, didelio formato. 1600 mm gerklė ir 3 metrų bėgis. TRUMPF TRUMATIC 500 CNC štampavimo staklės su valdymu ir oro stalu Galia: 220 kN Pagaminimo metai: 1999

Sąlyga: labai geros būklės (naudotas), Fixed Bed Milling Machine Zayer model KF 3000 with Heidenhain 355 CNC, equipped with external computer for CAD/CAM, table size 3000mm x 1000mm, travels: longitudinal 2700mm, cross 1250mm, vertical 1000mm, rapid traverse 15,000mm/min, Huron-type spindle head ISO 50, spindle speeds in 3 ranges up to 3000 rpm (variable), Huron head recently overhauled with replacement of gear set and all spindle bearings. Power: 30kW. Table load capacity: 10,000kg. Machine in good condition. Machine weight: 25 tons. Ledpfxsvdv Tce Af Iohb

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Initial commissioning: 2014 Control system: Heidenhain iTNC 530 HSCI incl. HR 520 electronic handwheel Machine Hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Hours on current milling spindle: approx. 900 h Travel X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Drives for linear axes Feed rate X/Y/Z-axes: up to 60 m/min Axis acceleration X/Y/Z-axes: up to 5 m/s² Electrical connection data Connected load: 190 kVA Primary fuse: approx. 315 A Dimensions, weights Machine footprint with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system Ledpfx Aowywcisf Ijhb - 50-position chain-type tool changer - Work area cover - Chip conveyor - LTA emulsion mist extraction unit Optional at extra cost: - Renishaw RMP60 wireless touch probe - BLUM Control NT Condition of the machine Fully functional, in very good condition, and can still be inspected under power! Images shown are exemplary and are from a new machine of this type. Original images will be provided shortly!