Būklė: naudotas, Techniniai duomenys: Godpfsu N Dfhox Ap Iouc Spaudimas: 160 t Stūmoklio eiga: 32...140 mm Eigos dažnis: 50 eigų/min Įdėjimo gylis: 400 mm Montavimo aukštis: 400 mm Stūmoklio slankiklio reguliavimas: 100 mm Stalo matmenys: 1000x750 mm (be tvirtinimo plokščių) Stūmoklio paviršius: 850x630 mm Sriegio skylė: 400x360 mm Bendra galia: 15,5 kW Mašinos svoris apie: 10,5 t Matmenys (I-P-A): valdymo spintos – 1,06x0,6x2,0 m Matmenys (I x P x A): I:2,9 x P:1,25 x A:3,3 m - Galimas tiek vienkartinis, tiek nuolatinis darbas - 2 tvirtinimo plokštės (1200x760x90 mm ir 1200x760x70 mm, sriegio skylės Ø=300 mm) - Galimas valdymas koja arba ranka - Paskutinė patikra atlikta 2006 m. - 80A; suslėgtas oras 6 kp/cm²; alyvos tūris apie 30 litrų Vidinėje būklėje.

Gamybos metai: 2021, būklė: naudotas, Technical Details: Pressing force: 5 t Column gap: - mm Installation height: 60 mm Rated power: 8 kVA Table height adjustment: 60 mm Compressed air: 6 bar Supply voltage: 400 V Electrical specification – Voltage/Frequency: 400/50 V/Hz Total power: 4 kW Machine weight approx.: 610 kg SERVO-MECHANICAL SPINDLE PRESS The machine is programmable! DESCRIPTION OF THE MACHINE 2 machines available MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. Guodjyzzh Espfx Ap Iec It consists of a welded L-shaped frame. On the horizontal arm, there is a movable press table which can be manually shifted along linear guides. In the forward position, the table can be manually locked with a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. Only in this position can the press head be lowered using the two-hand control. On the control panel, there are two-hand buttons, an emergency stop button, table lowering button, and force selectors 1,2. The pressing force can be set using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves on the vertical arm of the press. It also runs on linear guides. The head is driven by a lead screw, which is powered by an electric motor with gearbox via pulleys and a toothed belt. The entire machine is mounted on a table made of aluminum profiles.

Būklė: naudotas, Gamybos metai: 1990, Technical Details: Pressure: 63 t Stand width: 200 mm Stroke: 150 mm Installation height: 430 mm Strokes per minute: 400 spm T-slots H 12 650: 18 mm Table through-hole: 420 x 160 (w x l) mm Ram surface: 650 x 450 mm Control: Wanske Tronicpress CNC Gjdpfxeu Icxqj Ap Ijuc Column clearance: 550 x 540 mm Tank: 200 l Fixed ram stroke: 100 mm Ram diameter: 40 mm Table height above floor: 1000 mm Table: 600 x 450 mm Table height above floor with anti-vibration feet: 880 mm Total power: 30 kW Machine weight approx.: 3.9 t Hydraulic Punching Press for Precision Operations (High-Speed Press) - Suitable for punching, drawing, pressing, coin minting, bending, riveting, straightening, assembling - Equipped with hydraulic gripper feed type HS 150 and 7-roll straightening unit (synchronized) - Standardised for strip material approx. 0.4 mm – 2.5 mm thick x approx. 160 mm wide, as well as narrow strips up to approx. 4 mm. Feed length infinitely adjustable via control system. - With ram round column guide - With automatic central lubrication - High-speed: up to 400 strokes/min - Motorized adjustable fixed stop (can be adjusted manually or by motor from below) - Operating modes: continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets Condition: The press has a control system issue. Sale as is, as a source of spare parts or replacement machine. i.D.

Būklė: naudotas, Techninės detalės: Svoris: 1900 kg Gusdpsyyb Ntefx Ap Isc 2 vnt. WMW DP2 atraminiai laikikliai, yra Nr.1 ir Nr.2 Kaina už vnt.

Būklė: naudotas, Technical details: Piston diameter: Ø 160 mm Weight: 200 kg Dimensions: 0.6 x Ø 0.3 m Drawing cushion for a WMW Erfurt press PYE 160 Blank holder force: 50 Mp Ejection force: 4 Mp Stroke up to 160 mm Gjdpfx Aju Nurfjp Iouc Flange Ø 280 mm Piston centring borehole M16, mounting holes M24, Ø 118 mm Hydraulic connection 2x 1 inch internal diameter.

Būklė: naudotas, Gamybos metai: 1980, Technical Details: Pressure: 400 t Stroke: 40 - 140 mm Strokes per minute, continuous: 32 Throat depth: 400 mm Installation height, min/max: 450/590 mm Ram adjustment: 125 mm Table size: 1250x750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate L:1260 x W:760 x H:100mm - With drawing device, force 250 kN, stroke approx. 83mm - Operation via control panel Godpfxeu N A Uue Ap Ijuc No UVV (accident prevention regulations) As is (i.D.).

Būklė: naudotas, Gamybos metai: 1980, Techninės detalės: Slėgis: 160 t Eigos ilgis: 20-160 mm Įtraukos gylis: 400 mm Stūmoklio reguliavimas: 120 mm Smūgių skaičius: 71 smūgis/min Įrengimo aukštis: stalas/stūmoklis viršuje: 720 (esant 160 mm eigai) mm Įrengimo aukštis: stalas/stūmoklis apačioje: 560 (esant 160 mm eigai) mm Stūmoklio paviršius: 900 x 660 mm Praėjimas tarp stulpų: 500 x 450 mm Stalo matmenys: Ilgis x Plotis x Skersmuo: 1200 x 750 x 100 mm Bendras galios poreikis: apie 23,0 kW Mašinos svoris apytiksliai: apie 15,0 t Gedpfx Apou N A U Ij Ieuc Mašinos matmenys apytiksliai (Ilgis x Plotis x Aukštis): 2,7 x 1,5 x 3,45 m Valdymo spintos matmenys (Ilgis x Plotis x Aukštis): 2,0 x 0,65 x 2,15 m Valdymas per valdymo pultą/pjedestalą/pedalą ir rankinį valdymo įrenginį. Presas siūlomas pagal dvi parinktis. 1 parinktis: Parduodama esamos būklės, neprijungta, neišsami, neveikianti. 2 parinktis: Presas bus pilnai atnaujintas – visi komponentai bus pakeisti, atnaujinti ir patikrinti. Presas bus paruoštas naujam naudojimui. Prašome užklausose dėl šio preso nurodyti pageidaujamą pasiūlymo variantą!

Būklė: naudotas, Gamybos metai: 1985, Technical Details: Pressure: 100 t Stroke rate: 35-100 strokes/min Guodeu Nfh Dopfx Ap Isc Throat depth: 360 mm Slide adjustment: 20-130 mm Ram area: 750x550 mm Clamping plate on table: 1000x640 mm Stroke adjustment: 90 mm Clearance between uprights, lengthwise/sideways: 610x500 / 440x550 mm Installation height, table to ram bottom: 300 mm Total connected load: 17.5 kW Machine weight approx.: 7.0 t Machine dimensions approx. LxWxH: 1.9x1.4x2.7 m - The slide plate features 5 longitudinal T-slots - Center bore = 50 mm This press is currently for sale without a control system. Optional completion to customer specifications possible. Subject to prior sale.

Būklė: naudotas, Technical details: Pressing force: 6 t Distance between uprights: - mm Gjdpfxju Nfm Tj Ap Iouc Stroke: 130 mm Table size: 1200x550x30 mm Throat depth: 500 mm Total power requirement: 1.1 kW Machine weight approx.: 1000 kg Required floor space approx.: L:1.8xW:0.9xH:0.9 m HORIZONTAL SSE - Operation via keypad - Operating pressure infinitely adjustable from 10 to 600 bar - Workpiece clamping area is adjusted manually by moving the ram counter-holder plate via screw fastening - Dimensions of the ram counter-holder plate L:500xW:300xH:35 mm - Ram plate stroke: 130 mm - Ram clamping plate: 550x300x35 mm The machine is available for demonstration.

Būklė: naudotas, Technical details: Gjdpfx Apsu Nfnke Isuc Pressure: 63 t Frame opening: 900 mm Strokes per minute: approx. 75 spm Ram adjustment: 80 mm Adjustable stroke range: 3–100 mm Table size: 900 x 600 mm Throat depth: 310 mm Installation height: max. 350 mm Drive power: 11 kW Voltage: 380/220/24 V Frequency: 50 Hz Operating pressure: approx. 150 bar Oil capacity: 500 l Safety distance: 150 mm Pass-through opening in table: 200 mm Total power requirement: 11 kW Machine weight approx.: 4.0 t Space requirements approx.: L: 1.8 x W: 1.8 x H: 3.7 m DIFFERENTIAL TRAVEL PRESS HIGH-SPEED PRESS - High-performance high-speed press, C-frame design - Pneumatic connection: approx. 5 bar WITHOUT control cabinet!

Būklė: naudotas, Gamybos metai: 2014, Technical Details: Stamping force: 500 kN Shearing force: 9.0 t Control: Siemens Touch Panel S7 Ram adjustment: 80 mm Fixed stroke: 170 mm Strokes per minute: 20 - 120 spm Gap width: 1,140 mm Shut height: 350 - 430 mm Side frame opening: 315 mm Table surface (L x W): 1,100 x 400 mm Ram surface (L x W): 1,100 x 400 mm Throughhole in table: 950 x 100 mm Guedpfou Nfttox Ap Isc Table height above floor: 1,100 mm Side frame passage: 315 mm Drive power AC: 230 VAC / 24 VDC kW Operating pressure: 6 bar Operating hours: Machine 1: 6,654 h Operating hours: Machine 2: 5,970 h Total connected load: approx. 30 kW per machine Machine weight: approx. 9.5 t per machine 2 mechanical transfer presses – TRANSFER PRESS LINE in automated operation. This transfer press line is currently set up for the production of vehicle sockets/electrical sockets. The system includes: 1. Uncoiler PM245 with loop control, Coil weight 2 t, coil width up to 450 mm 2. Servo-driven strip feeder (roller feeder) with 2 axes (cross and longitudinal) 3. Press 1: Deep drawing press with five pneumatic ejectors (individually adjustable and extendable) 4. Feeding system from Püschel Förderbahn, drum vibratory feeder, linear vibratory feeder, Output up to 100 parts/minute Swivel belt conveyor for transferring deep-drawn parts / onward transfer via inclined conveyor into the peat swivel conveyor / onward transfer into the feed of the stamping press via mechanical oscillating rails 5. Punch press 2 (prepared for ejectors) Multiple safety fences, protective devices, safety switches, monitoring systems (Pilz PLC) (compliant with machinery directives) Optional: 1 unused reserve flywheel gearbox Optional: Complete tooling set for the manufacture of vehicle sockets (e.g. for cigarette lighters or electric devices) including complete technology and technical drawings (DXF)

Būklė: naudotas, Techniniai duomenys: Slėgis: 40 t Stovo plotis: - mm Eiga: 500 mm Išsikišimas: 360 mm Atstumas tarp stalo ir presavimo galvos: maksimaliai 800 mm Montavimo aukštis stalas/presavimo galva viršuje: 600 mm Presavimo galvos eiga: 500 mm Presavimo galvos eigos greitis pirmyn: 0,100 m/s Presavimo galvos grįžimo greitis: 0,450 m/s Gedpfxow Smuks Ap Ijuc Stalo matmenys: 750 x 500 mm Stalo perėjimas: 200 mm Presavimo galvos tvirtinimo paviršius: 360 x 450 x 72 mm Kaiščio skylė presavimo galvoje: 40 x 75 mm Aukštis virš grindų: 700 mm Bendras galios poreikis: 13 kW Mašinos svoris apie: 3,2 t Mašinos matmenys apytiksliai Ilg x Pl x Aukšt: 1,75 x 1,15 x 2,95 m

Būklė: naudotas, Gamybos metai: 1974, Technical Details: Pressure: 30 t Ram area: 450 x 250 mm Gujdsu Icx Repfx Ap Ijc Ram adjustment: max. 50 mm (manual) Strokes per minute: 20 - 120 Stroke: approx. 20 mm Stroke adjustment: none Installation height (working area): 220 - 280 mm Usable table area: 600 x 600 mm Total power requirement: 7.5 kW Approx. machine weight: 5.0 t Dimensions (L x W x H): Machine: 1.8 x 1.2 x 2.7 m Dimensions (L x W x H): Control cabinet: 0.92 x 0.46 x 1.4 m Mechanical 4-column punching press with feed unit with operator panel Clearance width: Frame opening front = 350 mm, lateral = 258 mm

Būklė: naudotas, Technical Details: Guedpfju N A D Asx Ap Ijc Stroke: 45 mm Installation height: 205 mm Throat depth: 92 mm Pressing force: approx. 2 kN Table size: 120 x 160 mm Distance table / ram: max. 205 mm Dimensions L x W x H: 0.24 x 0.17 x 0.8 m Total weight approx.: 23 kg This is a benchtop unit. Ram height can be adjusted at 140 mm by releasing the hex screws and using the hand crank. Ram holder Ø 10 mm with return spring Base with 2 clamping holes Ø 12 mm

Būklė: naudotas, Techninės detalės: Gjdpfx Apeu Nfg He Isuc Spaudimas: 90 t Iškyša: 320 mm Smūgių skaičius: 90 smūg./min Įrengimo aukštis: Stalas/stūmoklis viršuje: apie 380 mm Stūmoklio reguliavimas: maks. 65 mm Stūmoklio paviršius: 600x55 mm Tvirtinimo plokštė ant stalo: 800x640x80 mm Pereinimas: 260x160 mm Eigos reguliavimas: 60 fiksuota mm Bendras galios poreikis: 5,5 kW Mašinos svoris apie: 4500 kg Reikalinga erdvė apie: I:1,8xP:0,82xA:2,42 m - Vienkartinis/pastovus eigos režimas - Atliktas reguliarus patikrinimas, restauruota 2010 m. - Šiuo metu be valdymo skydelio, be valdymo sistemos, be suslėgto oro bako

Būklė: naudotas, Gamybos metai: 1964, Technical specifications: Gsdpfxsu Nfibo Ap Isuc Pressing force: 125 t Stroke: 28 mm Number of strokes: 56–225 strokes/min Upright gap: 1,000 mm Ram adjustment: 60 mm Distance table/ram: 376 mm Table size (W x D): 950 x 720 mm Pass-through opening in table: 400 x 130 mm Height above floor level: 1,120 mm Ram area: 920 x 540 mm Ram bore (diameter x depth): 65 x 120 mm Lateral upright passage: 250 mm Total power requirement: 30 kW Machine weight approx.: 15.5 t Machine dimensions (L x W x H): 3.1 x 1.34 x 3.6 m Control cabinet dimensions (L x W x H): 0.64 x 0.22 x 1.2 m This press is a high-performance press designed for large-scale series production. It includes a left-sided material feed via mechanical feed automation and a right-sided scrap cutter. Feed length: 0–200 mm; roller width: 250 mm Partial operation manual (copy) included. Machine is not operational! As is.

Būklė: naudotas, Gamybos metai: 1983, Technical Details: Pressing force: 100 t Stroke: 20 mm fixed Strokes per minute: 55 Table size: 900 x 640 mm Throat depth: 355 mm Ram adjustment: 150 mm Ram bore diameter: Ø 36 mm Gedsu Nfi Uopfx Ap Iouc Ram clamping surface: 500 x 415 mm Height above floor: 800 mm Maximum distance between table and ram: 390 mm Passage opening in table: Ø 330 mm Total power requirement: 11 kW Machine weight approx.: 7.5 t Transport dimensions (LxWxH): 1.9 x 1.6 x 3.1 m The press is supplied without machine control panel / switchgear cabinet. (Optional installation possible) Complete separate electric drive for 3x 380 Volt, 50 Hz Belt and ram guards PRESSMATIC friction clutch and brake unit

Būklė: naudotas, Technical details: Pressing force: 160 t Table area: 1,260 x 600 mm (vertical) Table plate size: 1,260 x 600 x 70 mm (vertical) Ram surface: 700 x 360 mm Throat depth: 300 mm Approx. machine weight: 9,000 kg Dimensions (L x W x H): 3.7 x 1.5 x 2.2 m Distance between bed and ram: 1,000 mm Mounted ram structure: L: 660 x W: 300 x H: 370 mm Feed rollers: one each on right and left, with vertical adjustment 250 mm (Ø 80 x 300 mm) Gusdpfxeu Nfpuo Ap Isc

Gamybos metai: 1997, būklė: naudotas, Techninės detalės: Spaudimas: 250 t Eiga: apie 400 mm Prietakos plotis: 640 mm Stalas virš grindų: 900 mm Stūmoklio greitis: reguliuojamas Praėjimas šoninėse kolonos: 470 mm Stalo tvirtinimo plotas I x P: 570x550 mm Stūmoklio tvirtinimo plotas: 570x550 mm Gsdpju Nfn Rsfx Ap Isuc Bendras energijos poreikis: 56 kW Mašinos svoris apytiksliai: apie 9,0 t Mašinos matmenys apytiksliai I x P x A: 2,5x1,8x3,8 m Transporto matmenys I x P x A: 2,6x1,8x3,1 m - Valdymas rankiniu būdu ir automatiniu režimu per SPS Allen Bradley - Vienarankis ir dvirankis valdymas - Stūmoklio keturių kolonų kreipiančiosios – be laisvumo - Derinimo ir automatinis režimas valdomas per SPS (šiuo metu neveikia) - Integruoti „Sick“ tipo šviesos barjerai ir apsauginės užuolaidos - CE žymėjimas nėra mentyti atitinkamai.

Būklė: naudotas, Technical details: Pressure: 200 t Stroke: approx. 200 mm Table surface: L: 1200 x H: 450 mm Jaw width: 1000 x 200 mm Total power requirement: 18 kW Machine weight approx.: 15 t Machine dimensions approx. LxWxH: 4.5 x 1.5 x 2.2 m Carrier straightening press - eccentric bending machine Gusdsu Nfrpspfx Ap Isc - Jaw mount: LxW 1200 x 220 mm - Jaw adjustment: 200 mm travel - Jaw opening width: 300 mm - Manual operation - Electrical cabinet (LxWxH: 0.85 x 0.8 x 2.7 m) Accessories: - Various stops, spacers, angle brackets and scribing gauges in scope of delivery.

Būklė: naudotas, Technical details: Gsdpfx Apsu Nftgo Iouc Pressure: manual t Gap between columns: - mm Stroke: approx. 20 mm Machine weight approx.: 9.5 kg Machine dimensions: L: 580 x W: 280 x H: 80 mm PNEUMATIC CABLE LUG PRESS - Application: Crimping of cable lugs onto electrical cables and climate control lines Additional features: - Press cylinder: Ram Ø 25mm; outer Ø 68mm; stroke length approx. 20mm - Tool holder: width = 40mm; length = 90mm - Hand lever Ø 30 x L: 300mm Equipment: - Toolbox with various round and hexagonal dies, see picture in original condition.

Būklė: naudotas, Gamybos metai: 2022, Technical Details: Pressure: 30 t Stroke: 142.5 mm Table Surface: 500 x 180 mm Pass-through Opening in Table: 500 x 160 mm Clearance Between Column Supports: 1000 mm Installation Height: Table/Ram Top: 120 - 1020 mm Machine Weight approx.: 176 kg Dimensions (L x W x H): approx. 0.8 x 0.8 x 1.8 m Simple hydraulic double-column press – custom-built from 20mm welded steel sheet. Table support with V-block 260 x 205 mm Lower beam installation height max./min.: 1031 / 151 mm Table height above floor max./min.: 1290 / 300 mm Lower beam vertical, adjustable manually, 10 positions, incremental spacing 100 mm Gusdpeu N A Eaofx Ap Isc Ram slide with stroke cylinder Ø 63 mm, with die holder, journal bore Ø 25 x 25 mm

Gamybos metai: 1992, būklė: naudotas, Technical details: Operating voltage: 380 V/Hz Diameter range: Ø 6 to Ø 50 mm Total power requirement: 1.5 kW Machine weight approx.: 293 kg Machine dimensions: 690 x 380 x 1150 mm Application: Assembly of hose lines Process: pressure-controlled crimping using assembly tools Hydraulics: 240 bar overpressure, capacity/content for 20 litres Guedpfsvc Atgjx Ap Ioc Drive: Electro-hydraulic Operation: ON/OFF switch and foot control Machine is currently equipped with die set DN 12-16 (Code 220) Additional die sets available: DN 6 - 10 (Code 215) DN 20 - 25 (Code 230) DN 32 (Code 240) DN 40 (Code 245) DN 50 (Code 260) without code: DN 21; DN 22; DN 33; DN 34; DN 35; DN 37; DN 39

Būklė: naudotas, Technical Details: Pressing force: 25 t Stroke: 500 mm Installation height: table/ram top position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.100 m/s Ram return speed: 0.45 m/s Table dimensions: 630 x 500 x 75 mm Table opening: Ø 180 mm Ram clamping surface: 450 x 360 mm Ram bore (pin hole): Ø 32 mm Height above floor level: 710 mm Guedpfx Aevc Awxsp Ijc Total connected load: 8.75 kW Machine weight approx.: 2.2 t Machine dimensions (LxWxH) approx.: 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and single-hand operation in setup mode) Continuous and single stroke operation

Būklė: naudotas, Gamybos metai: 1969, Techninės detalės: Slėgis: 55 t Gylio ilgis: 250 mm Eigos dažnis: 120 eigų/min Įrengimo aukštis (stalas/kumštis viršuje): 380 mm Kumščio reguliavimas: 55 mm Lakštinės medžiagos storis per einamąją eigą: 2,25 mm Kumščio eigos diapazonas: 6 - 90 mm Bendras galios poreikis: 8,8 kW Mašinos svoris apie: 2,75 t Matmenys I x P x A: 1,4 x 1,2 x 2,2 m Gedpfx Aoxu Dwmep Iouc