Hidraulinės vieno stulpelio presai 16–25 t pirkti naudotą (19)

Sąlyga: naudotas, Gamybos metai: 1961, Spaudimas: 0,25 t Stalo dydis: 450 x 500 mm Eiga: 500 mm Montavimo aukštis: 550 mm Nodpfxexukpcs Aghjwp Išsikišimas: 200 mm Stalo aukštis virš grindų: 800 mm Pereinamoji anga stale: 130 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 27 500 mm, bendras plotis: 10 500 mm, bendras ilgis: 16 500 mm, spaudimo jėga: 25 t, stalo plotis: 630 mm, stalo ilgis: 500 mm, darbinis greitis: 100 mm/s, bendras svoris: 2 200 kg, atbulinės eigos greitis: 450 mm/s, stūmoklio plokštės plotis: 450 mm, ramplokštės ilgis: 360 mm, štampo pagalvėlės eiga: 160 mm, tarpas tarp stulpų: 800 mm, eigos ilgis: 500 mm, galia: 8,75 kW (11,90 AG), Hydraulic press PYE 25 S1M. Year of manufacture: 1990. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: - Maximum pressing force: 25 tons - Working pressure: 16 MPa - Upper table: 450 x 360 mm - Lower table: 630 x 500 mm - Clear opening: 800 mm - Cylinder stroke: 500 mm - Downward speed: 100 mm/sec - Upward speed: 450 mm/sec - Power requirement: 8.75 kW - Weight: 2200 kg Nwodpfotzwxdsx Aghjp - Height: 2750 mm, Length: 1650 mm, Width: 1050 mm Technical condition of the machine is very good. The machine has undergone a complete overhaul. Inspection and testing of the machine under power is possible.

Sąlyga: naudotas, Gamybos metai: 1980, C-frame press. Machine no.: 52965 Pressure: 10 t Oil capacity: 110 liters +++++ Please note that the machine is disassembled and prepared for loading. For this reason, it is not possible to demonstrate the machine under power or to produce a video. In addition, our listing contains the most informative photos of the best possible quality. Unfortunately, sending additional pictures is not possible. +++++ Nsdpfsvxlr Djx Aghowp

Sąlyga: naudotas, Pressure 25 t Stroke 500 mm Throat depth 355 mm Installation height 800 mm Table surface 500 x 500 mm Nsdpfsvzxq Sjx Aghowp Table height above floor 700 mm Ram area 250 x 250 mm Drive power 7.5 kW Weight 2.1 t Space requirement approx. 1.45 x 0.9 x 2.55 m (LxWxH) Through hole in table 180 mm Permitted only for safe tools or fixed guard according to German Safety Regulations (UVV) With oil-hydraulic drive, upper and lower stroke limit, manual lever As is, as stands, WITHOUT commissioning, in given condition

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 700 mm, spaudimo jėga: 25 t, stalo plotis: 500 mm, stalo ilgis: 500 mm, bendras svoris: 2 000 kg, atstumo lentelė iki stūmoklio: 800 mm, eigos ilgis: 500 mm, Įranga: dokumentacija / vadovas, Parduodama: 1 vnt. naudota hidraulinė presas Gamintojas: VEB Werkzeugfabrik Zeulenroda WMW Tipas: PYE25/1 Bendroji masė: 2 t Nominali presavimo jėga: 25 MP Stūmoklio eiga: 500 mm Nwsdpfx Agsxfzdlehep Didžiausias atstumas tarp stalo ir stūmoklio: 800 mm Stalas: 500 x 500 mm Įskaitant dokumentaciją

Sąlyga: naudotas, Gamybos metai: 1990, PJ Hare 25HP iškirpimo presas, serijos numeris: 90F9091 (1990) Nwedpfxjxzfpqj Aghjp Vieta: Šis įrenginys yra Wolverhampton mieste, JK. Sėkmingo pirkimo atveju prie Jūsų sąskaitos automatiškai bus pridėtas £100 mokestis už išardymą ir pakrovimą ant tinkamos transporto priemonės. Blokavimo ir tvirtinimo išlaidas dengia pirkėjas.

Sąlyga: naudotas, Gamybos metai: 1980, Išsikišimas: 350 mm Eiga apie: 400 mm Stūmoklio skersmuo: 95 mm Presavimo jėga: 25 t Stalo gylis: 450 mm Stalo plotis: 1.500 mm Stalo aukštis: 900 mm Mašinos svoris apie: 2,5 t Užimama vieta apie: 2,0 x 2,0 x 2,3 m Vieno stovo tiesinimo presas MÜLLER - CR 25.2.1 - Darbo valandos: 543 h Nwedpfx Agjxgu Itohep - įsk. darbo lempa

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1977, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 27 500 mm, bendras plotis: 10 500 mm, bendras ilgis: 16 500 mm, spaudimo jėga: 25 t, stalo plotis: 630 mm, stalo ilgis: 500 mm, darbinis greitis: 200 mm/s, bendras svoris: 2 400 kg, atbulinės eigos greitis: 450 mm/s, stūmoklio plokštės plotis: 450 mm, ramplokštės ilgis: 360 mm, atstumas tarp stulpų: 800 mm, eigos ilgis: 500 mm, galia: 12,5 kW (17,00 AG), Hydraulic Press PYE 25 SS. Year of manufacture: 1977. Manufacturer: VEB Wema Zeulenroda (Germany). Nodstzxvwepfx Aghewp Specifications: - Maximum pressing force: 25 tons - Working pressure: 16 MPa - Upper table: 450 x 360 mm - Lower table: 630 x 500 mm - Daylight (clearance): 800 mm - Cylinder stroke: 500 mm - Downward speed: 200 mm/sec - Upward speed: 450 mm/sec - Power requirement: 12.5 kW - Weight: 2,400 kg - Height: 2,750 mm; Length: 1,650 mm; Width: 1,050 mm The machine is in very good technical condition. It has undergone a general overhaul. Inspection and on-site testing of the machine in operation are possible.

Gamybos metai: 1986, Sąlyga: beveik kaip naujas (naudotas), Naudojama PJ Hare Ltd C tipo hidraulinė presas pardavimui: Parduodamas Pj Hare Limited hidraulinis presas PRESO MODELIS: 25HP Bendras aukštis (mm): 2425 Bendras plotis (mm): 1120 Bendras gylis (mm): 1470 Svoris (kg): 2000 Tvirtinimo skylės diametras (mm): 18 Tvirtinimo skylių centrai (mm x mm): 610 x 1108 Tvirtinimo platformos dydis (mm x mm): 120 x 250 Alyvos talpa (l): 50 Oro tiekimo slėgis max (bar): 6 Oro tiekimo slėgis min (bar): 4 Pagrindinio variklio galia (kW): 7,5 Variklio saugiklio srovė (A): 20 Visas komplektas su amortizatoriumi Elektros tiekimo duomenys: Minimalus saugiklio srovė (A): 35 Minimalus laidininko skerspjūvis (mm²): 2,5 2 puslapis: MODELIS 25HP: Galia (t): 25 Galia (kN): 250 Stūmoklio jėga (t): 3,1 Stūmoklio eigos greitis (mm/s): 425 Stūmoklio presavimo greitis (mm/s): 35,1 Stūmoklio grįžimo greitis (mm/s): 289 Variklio galia (kW): 7,5 Apytikslis svoris (kg): 2000 Maksimalus eiga (mm): 150 Apsauga - angos plotis (mm): 680 Apsauga - angos aukštis (mm): 300 Minimalus uždarymo aukštis (mm): 200 Maksimalus tarpas (mm): 450 Uždarymo aukščio reguliavimas (mm): 100 Rėmo gylis (mm): 250 Darbo stalo aukštis (mm): 900 Nwodpfohcfyujx Aghjp Darbo stalo plotis (mm): 650 Darbo stalo gylis (mm): 480 Nuo priekio iki ašies (mm): 250 Praėjimo skylė (mm): 150 Praėjimas po stalu (mm): 350 / 250 T-formos griovelio duomenys (mm): 18, 15, 34, 33 Stalo storis (mm): 95 Šoninės angos plotis (–) Vertikalios angos plotis (mm): 255 Angos rėme plotis (mm): 250 Angos rėme aukštis (mm): 250 Viršutinės plokštės plotis (mm): 420 Viršutinės plokštės gylis (mm): 220 Viršutinės plokštės tvirtinimo skylės (mm): 370, 170, 13 Įrankio laikiklio diametras (mm): 40 Įrankio laikiklio ilgis (mm): 65 Tvirtinimo skylės diametras (mm): 18 Bendras gylis (mm): 1400 Bendras plotis (mm): 900 Bendras aukštis (mm): 2450 Tvirtinimo skylių centrai (mm): 1110 Hare presai pardavimui Nauji C ir H tipo hidrauliniai presai pardavimui

Sąlyga: naudotas, Gamybos metai: 2000, Pressure: 25 t Stroke: 150 mm Throat depth: 420 mm Installation height: 450 mm Table size: 700 x 820 mm Table height above floor: 850 mm Ram area: 600 x 600 mm Approach speed: 370 mm/s Return speed: 370 mm/s Working speed: 18 - 33 mm/s Oil capacity: 300 l Drive power: 5.5 kW Weight: 5.8 t Nodpfxjvut N No Aghswp Required floor space (approx.): 1.1 x 2.0 x 2.4 m (LxWxH) Approved for manual loading according to CE standard With electro-hydraulic drive, pressure/time and stroke/position control, cutting stroke damping, mechanical depth stop, two-hand operation

Sąlyga: geras (naudotas), Gamybos metai: 1988, mašinos/transporto priemonės numeris: 053-019/35, Offer 24591 Technical Data: - Max. pressing force: 25 t - Max. ram stroke: 500 mm Nwsdpfx Agswd Nybohsp - Stroke speed: 0 - 40 mm/s - Return speed: 0 - 200 mm/min - Installation height: 800 mm - Throat depth to center of ram: 360 mm - Ram clamping surface: 440 x 360 mm - Ram clamping pin: 40 mm - Table size: 630 x 500 mm - Table height above floor: 710 mm - Drawing force: 10 t - Maximum drawing depth: 160 mm - Drive: 400 V / 4 kW - Required space (approx.): W 800 x H 2720 x D 1150 mm - Weight approx.: 2500 kg

Sąlyga: naudotas, Single-Column Hydraulic Press HYDRAP Type HPSK 25 Serial No. 6312 Year of manufacture: 1989 Nwodpfx Agshrakvjhep Pressing force: 25 tons Ram stroke: 500 mm Throat depth: 300 mm Daylight opening: 700 mm Table area: 1000 x 500 mm Table bore: Ø 210 mm Ram area: 400 x 360 mm Clamping shank bore: Ø 40 mm Table height above floor: 855 mm Rapid approach speed: 280 mm/sec Pressing speed: 3.5 mm/sec up to 25 mm/sec Return speed: 280 mm/sec Hydraulic tank capacity: 240 liters Drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz - Operation and programming via SIEMENS S5 with OP1 control - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely variable via manual pressure regulator - Short-stroke function - Mechanical tool clamping on the ram with T-slots and clamping shank bore - Control cabinet with electrical control mounted on the machine - Two-hand operation and electrical connection for foot switch - Control prepared for electrical tool monitoring - Hydraulic and electrical circuit diagrams available Required floor space (L x W x H): 1800 x 1200 x 2930 mm Weight: approx. 4 tons Good condition

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 400 mm, bendras plotis: 1 500 mm, bendras ilgis: 2 400 mm, spaudimo jėga: 20 t, bendras svoris: 2 000 kg, įvesties srovės tipas: trifazis, valdymo spintos plotis: 80 mm, įėjimo įtampa: 400 V, valdymo spintos ilgis: 60 mm, galia: 22 kW (29,91 AG), įėjimo srovė: 32 A, aplinkos temperatūra (min.): 10 °C, aplinkos temperatūra (maks.): 40 °C, aukščio reguliavimo tipas: hidraulinis, Įranga: dokumentacija / vadovas, If the press does not meet your exact requirements, please request a customised offer tailored to your needs with just one click: Contact us for a customised quotation. HIDROBRASIL manufactures presses to your specifications at surprisingly attractive prices! ##### 20 T Tablet Press, C-Frame Press, Single-Column Press, Manual Loading Press Machine type: Hydraulic Single-Column Press Year of manufacture: 2023 Location: Gelsenkirchen, Germany Technical Data: - Pressing force: max. 20 tonnes (at 250 bar) - Free opening force: max. 20 kN - Pressure build-up time: max. 2 seconds (Closed tool, steel-on-steel) - Maximum opening stroke: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor: 800 mm - Overall height: approx. 2,400 mm - Minimum hall height: 3,500 mm - Parallel deviation: +/- 0.1 mm at 20°C - Deflection: 0.3 mm/m (at max. closing force, 70% table coverage) - Total weight: approx. 2 tonnes - Operating speeds: Rapid close 120 mm/s, pressing speed 10 – 5 mm/s - Sound pressure level: max. 78 dB(A), measured 15 m high at control panel to DIN 45635-T16-KL3 - Hydraulics: - Number of press cylinders: 1 pc. - Operating pressure: max. 250 bar - Pressure accuracy during pressing stroke: +/- 5 bar - Main pump: Gear pump, approx. 10 L/min - Oil volume: approx. 150 litres (HLP 46 MW) - Ambient temperature: max. 40°C - Oil temperature: max. 55°C - Electrical: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main drive motor: 22 kW - Total connected load: approx. 6 kW - Control cabinet: - Protection class: IP 54 - Spare capacity: approx. 20% - Cooling: none - Internal lighting: none - Operating mode selector: lockable Njdpotv Ewdofx Aghowp Equipment: - Light curtain: SICK/PILZ/SCHMERSAL - Position adjustment: via adjustable sensors - Pressure adjustment: 5 T to 20 T, adjustable via rotary knob - Two-hand operation: standard, optional foot control available - Table plate: tray-type with 50 mm high rim and side drain - Control cabinet: mounted to right of press, IP 54 protection rating Operation and Controls: - Activation: via main switch - Pressure adjustment: via rotary knob - Cycle initiation: by two-hand operation or optional foot pedal - Safety features: in accordance with EU directives and UVV regulations Special Features: - Press tooling components: upper tool with 8 press rams, 3-part lower tool - Press cycle: capable of producing 8–12 pressed parts per minute - Hydraulic unit: fully removable for maintenance Service and Warranty: - Monitoring and testing: according to DIN ISO 16092-3-2018 - Customer service: from Waibstadt or Gelsenkirchen - Documentation: conforming to CE standards --- Are you looking for a tailor-made machine? Contact us for a customised offer.

Sąlyga: naudotas, Table size: 630x490 mm Nedpfx Ajv S Uyqoghswp Stroke length: 500 mm Max. feed: 500 mm

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 500 mm, įrengimo aukštis: 400 mm, bendras plotis: 1 100 mm, bendras ilgis: 1 100 mm, spaudimo jėga: 20 t, stalo plotis: 750 mm, stalo ilgis: 700 mm, bendras svoris: 2 000 kg, atstumas tarp stulpų: 700 mm, darbinio aukščio: 400 mm, tarpas tarp stulpų: 700 mm, eigos ilgis: 410 mm, įėjimo įtampa: 380 V, praėjimo plotis: 700 mm, Max. pressure capacity: 20 tons Stroke length: 490 mm Column width: 700 mm Table (LxW): 700 x 750 mm Ram (LxW): 650 x 200 mm Equipped with: - Machine operates both horizontally and vertically. - Hydraulic tilting function. Nsdpfx Agewzcfljhjwp Country of origin: Netherlands Machine dimensions (LxWxH): 110 x 110 x 250 cm Machine weight: 2,000 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1990, Pressure: 25 t Outreach: 160 mm Installation height: 500 mm Table size: 650 x 650 mm Ram surface (round): 140 mm Stroke: 130 mm Nodpfefcw Apjx Aghewp Power requirement: 4 kW Weight: 2000 kg Height: 2100 mm Width: 1100 mm Depth: 1500 mm

Sąlyga: naudotas, Gamybos metai: 1976, Pressure 20 t Reach 185 mm Stroke 100 mm Table clamping surface 380 x 350 mm Installation height 250 mm Table height above floor 840 mm Nwsdpstqqwuefx Aghop Total power requirement 4 kW Machine weight approx. 1.3 t

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 23 000 mm, bendras plotis: 7 800 mm, bendras ilgis: 10 400 mm, spaudimo jėga: 25 t, stalo plotis: 780 mm, stalo ilgis: 200 mm, darbinis greitis: 13 mm/s, atbulinės eigos greitis: 24 mm/s, eigos ilgis: 480 mm, darbinis slėgis: 230 juosta, alyvos bako talpa: 20 l, galia: 3 kW (4,08 AG), VERSATILE workshop / arbor press Available in both 20 and 25 ton versions. BAR-MAN 20: €3,300 Nwodpfxst A Dzns Aghep BAR-MAN 25: €3,860 The BAR-MAN is suitable for a wide range of applications, such as maintenance tasks, broaching keyways, pressing bearings in and out, and much more. This powerful machine offers you maximum flexibility while ensuring comfortable operation at all times.

Sąlyga: naujas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: DF0287, Pressure: 25 t Clear passage width: 1000 mm Stroke: 800 mm Machine weight approx. (without operating fluids): 4 t Dimensions L x W x H: approx. 2054 x 2200 x 3126 mm Return force: 2 t Motor power: 5 kW Max. working height: 800 mm Maximum approach speed: 80 mm/sec Pressing speed: 10 mm/sec Rapid traverse speed: 80 mm/sec Travel path: 800 mm Ram plate: 400 x 400 mm Table plate: 1000 x 800 mm Table height above floor approx.: 850 mm Table cutout: 650 x 150 mm Oil tank: 200 l Ram stabilized by 4 chrome-plated linear guides, each ø50 mm: bronze guides Ram thickness: 122 mm Steel plate on spring-loaded rollers: 600 x 400 x 15 mm Control system Siemens: S7 1200 Light barriers from Schmersal: 1800 mm above floor Monitor: SIEMENS 10 inch Mounting table on the left of the machine body with 10 mm precision-milled steel plates: 1000 x 800 mm, 850 mm high Nwedpfx Aefxyikjghop The machine has a clear open height of 800 mm. The ram has a size of 400 x 400 mm and a thickness of 122 mm.