C presas

hidrobrasil Einständerpresse

Būklė: naujas, Gamybos metai: 2021, spaudimo jėga: 10 t, Single-column press with 10 T capacity, suitable for continuous shift operation, featuring the following basic specifications: a) Travel speed adjustable from 0 to 10 mm/sec downwards, b) Opening speed up to 25 mm/sec, c) Initial pressing speed 10 mm/sec, adjustable from 0 to 10 mm/sec, d) Table size 600 x 300 mm, e) Ram size 300 x 300 mm, with T-slots and central cylinder clamping, f) Overall dimensions approx. 1100 x 600 x 1850 mm, g) Oil temperature indicator on the oil tank, h) Pressure setting from 0.5 T to 10 T (adjustable via rotary knob), i) Cable remote control for up/down movement, Gisdpfx Acjhma Smoysp j) Machine frame powder-coated or double painted, k) Control cabinet cable entry from above with 3000 mm cable and 16 amp plug, l) Installation, commissioning, and operator training available at additional cost. Design Press type: Single-column press Thermally neutral: 80–120°C Number of operator sides: 1 side Forces Press force max. (at 250 bar): 100 kN Free opening force max.: 10 kN Pressure build-up time (closed tool, steel on steel): max. 2 sec. Dimensions Max. opening: 800 mm Stroke and min. opening: 500/300 mm Table height above floor: 850 mm Height above floor (overall height): approx. 2850 mm Minimum hall height: 3,500 mm Parallelism deviation at 20°C: #ERROR! mm Deflection: Measured at max. closing force with 70% occupancy: ≤ 0.1 mm/m Weight Total weight of press without fluids: approx. 1.6 t Speeds Rapid close: 10 mm/sec Pressing speed: 10–0 mm/sec Sound pressure Sound pressure level measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics Number of press cylinders: 1 unit Operating pressure max.: 250 bar Pressure build-up time: 2 sec. Pressure accuracy during pressing stroke: #ERROR! bar Main pump: Gear pump approx. 6 L/min Oil volume: approx. 80 liters HLP 46 MW Ambient temperature max.: 40°C Oil temperature max.: 55°C Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection – main motor: 2.2 kW Total connected load: approx. 3 kW

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, The granulate mixer is available in 6 versions: Execution possible in stainless steel or painted steel: Technical specifications: MV 2 Gsdpfx Asd R Atrscyeip The MV 2 ensures thorough mixing of the entire plastic granulate, thanks to the forced guidance through the screw sleeve. Container capacity: 120 kg / 200L L x W: 700 mm x 700 mm x Height: 1050 mm / 1250 mm - Removable screw - Mixing time control - Extraction device - 1 discharge outlet - Mobile base frame with 100 mm castor wheels, all with parking brakes.

Būklė: naujas, Gamybos metai: 2022, spaudimo jėga: 100 t, Estimated equipment weight: 3,500 kg Equipment dimensions (W x D x H) (approx. external): 1354 x 2005 x 2595 mm Table dimensions (working area) W x D (table size): Ø1050 mm Clearance between table and ram (daylight): 350 mm Ram stroke (ram travel): 300 mm Drive power (motor power): 14.24 kW Motor speed: 1,500 rpm Pump flow rate: 44.50 LPM Pump-motor displacement ratio: 27.59 cm³/rev Working force (cylinder force): 100 t Return force: 10 t Approach speed: 250 mm/s Working speed under pressure: 3~15 mm/s Gisdohmi T Uspfx Acyop Return speed (lifting speed): 150 mm/s Working pressure (maximum operating pressure): 210 bar Number of cylinders: 2 pcs Rod diameter: 41.76 mm Cylinder diameter: 250.97 mm Cylinder stroke (ram travel): 300 mm Tank capacity (oil tank volume): 350 litres Extraction cylinder: 5 t Extraction cylinder stroke (ram travel): 150 mm

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 400 mm, bendras plotis: 1 500 mm, bendras ilgis: 2 400 mm, spaudimo jėga: 20 t, bendras svoris: 2 000 kg, įvesties srovės tipas: trifazis, valdymo spintos plotis: 80 mm, įėjimo įtampa: 400 V, valdymo spintos ilgis: 60 mm, galia: 22 kW (29,91 AG), įėjimo srovė: 32 A, aplinkos temperatūra (min.): 10 °C, aplinkos temperatūra (maks.): 40 °C, aukščio reguliavimo tipas: hidraulinis, Įranga: dokumentacija / vadovas, If this press does not precisely match your requirements, please request a customized quotation tailored to your specifications with just one click: Contact us for your personalized offer. HIDROBRASIL manufactures presses exactly to your needs at surprisingly affordable prices! ##### C-Frame Press 20 Ton Hand-Loaded Press 20 T Tablet Press, Single Column Press, C-Frame Press, Hand-Loaded Press Machine type: Hydraulic Single Column Press Year of manufacture: 2023 Location: Gelsenkirchen, Germany Technical data: - Pressing force: max. 20 tons (at 250 bar) - Free stripping force: max. 20 kN - Pressure build-up time: max. 2 seconds (closed tool, steel on steel) - Maximum opening width: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor: 800 mm - Overall height: approx. 2400 mm - Minimum hall height: 3,500 mm - Parallelism deviation: +/- 0.1 mm at 20°C - Deflection: 0.3 mm/m (at max. closing force with 70% table occupation) - Total weight: approx. 2 tons - Travel speeds: Rapid close 120 mm/s, Pressing speed 10–5 mm/s - Sound pressure level: max. 78 dB(A) measured at 15 m height at the control panel according to DIN 45635-T16-KL3 Hydraulics: - Number of press cylinders: 1 pc. - Operating pressure: max. 250 bar - Pressure accuracy during press stroke: +/- 5 bar - Main pump: gear pump approx. 10 L/min - Oil volume: approx. 150 liters (HLP 46 MW) - Ambient temperature: max. 40°C - Oil temperature: max. 55°C Electrics: - Main power supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 22 kW - Total connection load: approx. 6 kW Control cabinet: - Protection rating: IP 54 - Spare space: approx. 20% - Cooling: no - Interior lighting: no - Mode selector switch: lockable Equipment: - Light barrier: SICK/PILZ/SCHMERSAL - Position setting: via adjustable sensors - Pressure adjustment: 5 T to 20 T, adjustable via rotary knob - Two-hand operation: standard, optional foot operation available - Table plate: tray with 50 mm high rim and side outlet - Control cabinet: mounted on the right side of the press, IP 54 protection rating Gsdpfx Acjtv Ewdjyoip Function and operation: - Activation: via main switch - Pressure setting: via rotary knob - Cycle initiation: by two-hand operation or optional foot pedal - Safety features: compliant with EU regulations and accident prevention requirements (UVV) Special features: - Press tool parts: upper tool with 8 press rams, 3-piece lower tool - Pressing cycle: capable of producing 8–12 pressed parts per minute - Hydraulic unit: fully removable for maintenance work Service and warranty: - Monitoring and testing: according to DIN ISO 16092-3:2018 - Customer service: from Waibstadt or Gelsenkirchen - Documentation: in compliance with CE standards --- Looking for a tailor-made machine? Contact us for your personalized offer.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, New machine 24 months warranty Advantages: + Tested with various doughs by our master baker and confectioner + Very robust construction, power transmission via belt drive + No three-phase power required – operation possible with 230V! + Equipped with 4 support feet and permanently installed bowl + Mobile unit on swivel castors with parking brake + Short kneading times with excellent results + With reverse gear for mixing ingredients before kneading process Giodpfx Ajivdyyscyep + 10 kneading speeds for exceptionally gentle to intensive kneading + 2 timers with switch-over and automatic shut-off functions + Ideally suited for small batches + Bowl, central shaft, and spiral made of stainless steel + Safety grid with automatic shut-off + Fast spare parts supply within 1–2 working days Technical Data: - Flour capacity: 1 – 8 kg - Dough capacity: 1.5 – 12 kg - Bowl volume: approx. 20 liters - Motor power: 1.3 kW (spiral & bowl drive) - RPM at 50Hz (speed level 1 – 10) Spiral: 65 – 320 - RPM at 50Hz (speed level 1 – 10) Bowl: 6.5 – 32 - Electrical connection: 230V – 1Ph – 50Hz - Dimensions in mm: 505 x 700 x 870 (W x D x H) - Height with flour dust cover open: 1010 mm - Height upper edge of bowl: 560 mm - Net weight: 105 kg

Būklė: naujas, Gamybos metai: 2022, spaudimo jėga: 15 t, Single-column press with 15 t capacity Suitable for continuous shift operation: a) Travel speed 10 mm/sec downward b) Opening speed up to 25 mm/sec c) Initial pressing speed 10 mm/sec d) Table size: 400 x 400 mm e) Ram size: 200 x 200 mm, with T-slots and central cylinder clamping f) Overall dimensions: approx. 1150 x 800 x 1750 mm g) Oil temperature gauge on oil tank h) Pressure setting from 5 t to 17 t (adjustable via rotary knob) i) Manual lever operation with two speeds j) Machine frame powder-coated or double-lacquered k) Control cabinet power supply from above with 3000 mm cable and 16 A plug l) Installation, commissioning, training subject to separate charge Press type: Single-column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces: Max. pressing force (at 250 bar): 150 kN Max. free opening force: 10 kN Pressure build-up time, closed tool, steel on steel: max. 2 sec. Max. opening width: 400 mm Stroke and min. opening: 350 mm Giedpfsitylgsx Acysp Table height above floor: 850 mm Overall height above floor (total height): approx. 1900 mm Minimum hall height: 2,500 mm Parallelism deviation at 20°C: +/- 0.1 mm Measured at max. closing force with 70% occupancy

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 620 mm, bendras plotis: 850 mm, bendras ilgis: 1 869 mm, spaudimo jėga: 30 t, stalo plotis: 600 mm, stalo ilgis: 600 mm, bendras svoris: 2 900 kg, Weight approx. 2,900 kg Table plate size 600 x 600 x 100 mm, plus 50 mm free space behind the plate up to the press column Table fixing positions at 600, 800, 1000 mm Ram stroke 400 mm Motor 3 kW 60 liter hydraulic tank Downward speed 10 mm/sec Gjdpfxevhcykj Acyeip Upward speed 24 mm/sec

Būklė: naudotas, Gamybos metai: 1993, Slėgis: 2 x 6,3 t Eiga: 307 mm Išsikišimas: 180 mm Įrengimo aukštis: 900 mm Stalo paviršius: 470 x 360 mm Stalo aukštis virš grindų: 810 mm Stūmoklio plotas: 45 mm Giedpfx Acjvut Rmsyop Greitis žemyn: 137 mm/s Greitis aukštyn: 33 mm/s Darbinis greitis: 540 mm/s Alyvos kiekis: 140 l Variklio galia: 3,0 kW Svoris: 1,5 t Užimamas plotas: apie 1,2 x 1,2 x 2,8 m Leidžiama rankinis uždėjimas pagal Vokietijos nelaimingų atsitikimų prevencijos nuostatas (UVV) Su alyvos hidrauline pavara, valdymas priklausomai nuo slėgio/laiko ir padėties, dviejų rankų valdymas Presas turi 2 presavimo cilindrus – presavimo galia 2 x 6,3 t.