šildymo presas

Hidrobrasil Vulkanisierpresse

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, spaudimo jėga: 120 t, stalo ilgis: 600 mm, stalo plotis: 600 mm, Vulcanizing Press – Manufacturer Hidrobrasil – 120 t Heating Press For sale is a hydraulic vulcanizing press from Hidrobrasil featuring a maximum pressing force of 120 t. This machine is equipped with heating plates sized 600 × 600 mm, flexible pressure adjustment, and comprehensive control and safety features. It is especially suited for vulcanization, laminating, and thermal pressing processes in rubber and plastics processing. Hodpfx Aok S Dt Tof Ujl ==== Technical Data & Information: Vulcanizing Press Hidrobrasil – Heating Press ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Type: Heating Press / Vulcanizing Press - Pressing force: 120 t (max. 1,600 kN) - Pressure range: 30 – 120 t - Machine weight: approx. 9 t - Dimensions (L × W × H): approx. 2,000 × 1,000 × 2,800 mm - Table height above floor: 850 mm - Minimum hall height: 3,500 mm ==== Working Area - Stroke: 400 mm - Opening height per section: 200 mm - Minimum opening: 200 mm ==== Table and Ram - Table size: 600 × 600 mm - Ram size: 600 × 600 mm - Heating plates: 600 × 600 mm (optional) ==== Forces - Free stripping force: max. 200 kN ==== Speeds - Idling speed: up to 40 mm/s - Opening speed: up to 40 mm/s - Pressing speed: 5 – 15 mm/s ==== Hydraulics - Operating pressure: max. 240 bar - Pressure build-up time: approx. 4 sec. - Pressure build-up time (steel on steel): max. 8 sec. - Pressure accuracy: ± 5 bar - Pressure holding valve: up to 1,800 sec. - Automatic pressure readjustment - Oil volume: approx. 300 l (HLP 46) - Main pump: Bosch Rexroth gear pump approx. 48 l/min - Max. oil temperature: 55 °C - Max. ambient temperature: 40 °C ==== Cooling and Lubrication - Circulating oil cooling - Oil temperature monitoring - Automatic lubrication ==== Heating System - Electrically heated plates up to 250 °C (optional) - Thermally neutral: 80 – 120 °C ==== Control and Operation - Control panel integrated into switch cabinet - Two-hand operation - Programmable setup mode - Single stroke adjustable - Free positioning of the ram - Stroke limitation via pressure or position - Signal tower (Red/Yellow/Green) ==== Safety - Light barriers (SICK / Leuze, 14.1 mm, front) - Monitored rear door - Machine frame double coated ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic motor connection: 15 kW - Total connected load: approx. 19 kW (without heating plates) ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing, hot pressing Vulcanizing press, heating press, hydraulic press, rubber press, laminating press, compression press, thermal press, tryout press, tool tryout press

Būklė: geras (naudotas), Gamybos metai: 2000, stalo plotis: 1 000 mm, stalo ilgis: 1 800 mm, stūmoklio plokštės plotis: 600 mm, bendras ilgis: 25 000 mm, bendras plotis: 27 000 mm, bendras aukštis: 47 000 mm, bendras svoris: 43 000 kg, štampo pagalvėlės eiga: 200 mm, Control system Siemens Simatic OP 27 Light barrier by Sick Hsdjtiwgispfx Af Ujl Separate control cabinet by Rittal Side walkways/passages Floor-level installation

Būklė: naujas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: DF0303, spaudimo jėga: 160 t, stalo ilgis: 550 mm, stalo plotis: 500 mm, darbinio aukščio: 550 mm, Vulcanizing Press – Manufacturer Hidrobrasil – 160 t Heated Press For sale is a hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 160 t. The machine features electrically heated platens with a size of 550 × 500 mm, a maximum daylight of 550 mm, and a modern control system with recipe management. It is particularly suitable for vulcanizing, laminating, and thermal pressing processes in rubber and plastics processing. ===== Technical Data & Information: Vulcanizing Press Hidrobrasil – Heated Press ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Type: Heated Press / Vulcanizing Press - Pressing force: 160 t - Machine weight: approx. 4.3 t - Dimensions (L × W × H): 1,150 × 2,600 × 2,400 mm Hjdpjfxygpofx Af Uel ==== Working Area - Distance between uprights: 700 mm - Max. daylight: 550 mm - Stroke / travel: 400 mm - Table height above floor: 900 mm ==== Table and Ram - Table plate: 700 × 600 mm - Ram plate: 700 × 600 mm - Heated platens: 550 × 500 mm (with 2 temperature sensors) ==== Forces - Return force: 16 t ==== Speeds - Advance speed: 50 mm/s - Pressing speed: 10 mm/s - Fast approach speed: 50 mm/s - Return speed: 50 mm/s ==== Hydraulics - Motor power: 15 kW - Oil tank: 300 l - Electric oil cooling: 1.5 kW ==== Heating System - Electrically heated platens up to 200 °C - Heating capacity: approx. 12 kW - Temperature range: 100 – 200 °C (in 5 °C increments) - Temperature accuracy: ± 3 °C - 2 temperature sensors per platen - Upper and lower platens are separately controllable - Adjustable heating time - Automatic opening after heating cycle ==== Ejector System - Ejector size: 30 × 30 mm - Ejector stroke: 150 mm - Ejector force: 15 t - Ejector speed: 25 mm/s - Number of ejectors: 1 ==== Control - Siemens S7-1200 - Monitor: 12 inch - Freely programmable positions: - Upper stop / speed change - Pressure build-up A / pressure relief - Pressure build-up B / pressure relief - Lower stop - Pressure and venting time are freely adjustable - Pressure holding time up to 20 minutes - Recipe management: Up to 25 programs can be stored - Expansion via USB possible ==== Equipment - Swiveling two-hand operation - Interior lighting - Pressure adjustment via rotary dial (10 steps) - Platens with T-slots according to DIN 650 (customized) - Platen insulation from machine body ==== Options - Rear double door with monitoring: €2,400 - Right-side monitored door: €1,200 - Left-side monitored door: €1,200 ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal press operations, hot pressing Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, compression press, thermo press, tryout press, tool tryout press Looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our greatest strength is special-purpose machine construction and press automation.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, bendras aukštis: 2 500 mm, stalo aukštis: 900 mm, presavimo greitis: 8 mm/s, spaudimo jėga: 50 t, bendras svoris: 2 900 kg, darbinis slėgis: 250 juosta, stūmoklio plokštės plotis: 498 mm, stalo ilgis: 522 mm, stalo plotis: 522 mm, įvesties srovės tipas: Oro kondicionierius, galia: 10 kW (13,60 AG), įėjimo įtampa: 400 V, atstumo lentelė iki stūmoklio: 600 mm, alyvos bako talpa: 130 l, darbinis greitis: 8 mm/s, Įranga: apsaugos šviesos užtvara, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double-Column Heated Press For sale is a hydraulic vulcanizing press from Hidrobrasil featuring a pressing force of 50 t and a robust double-column design. The machine is equipped with electrically heated platens measuring approx. 522 × 522 mm, a maximum opening width of 600 mm, and precisely adjustable pressing and heating parameters, making it ideal for continuous industrial processes such as vulcanization, laminating, and thermal pressing. ===== Technical Data & Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double-column heated press - Pressing force: 50 t (500 kN) - Machine weight: approx. 2.9 t - Total height: approx. 2,500 mm - Minimum hall height: 3,500 mm ==== Working Area - Max. opening width: 600 mm - Stroke / min. opening: 300 / 300 mm - Table height above floor (with platens): 900 mm ==== Table and Ram - Table size / heating plates: approx. 522 × 522 mm - Ram size / heating plates: approx. 498 × 498 mm - Number of heating levels: 1 ==== Forces - Free stripping force: 20 kN - Pressure range: 8 – 50 t ==== Speeds - Idle speed: up to 10 mm/s - Opening speed: up to 40 mm/s - Pressing speed: max. 8 mm/s ==== Hydraulics - Operating pressure: max. 250 bar - Pressure build-up time: max. 3 sec. - Pressure accuracy: ± 5 bar - Main pump: Bosch Rexroth gear pump, approx. 26 l/min - Oil volume: approx. 130 l (HLP 46) - Automatic pressure readjustment - Pressure holding up to 3,600 sec. - Oil circuit cooling - Oil temperature monitoring ==== Heating System - 2 electrically heated platens - Temperature range up to 200 °C - Thermally neutral: 80 – 120 °C - Integrated temperature sensor - Platens insulated ==== Control and Operation Hodpfxstwv S No Af Usl - Two-hand operation (adjustable or fixed) - Travel limitation via pressure or position - Pressure setting via rotary knob - Signal tower (Red / Yellow / Green) - Operation via control cabinet ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic motor connection: 7.5 kW - Total connected load: approx. 10 kW (excluding heating plates) ==== Miscellaneous - Sound pressure level: max. 78 dB(A) - Parallelism deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing processes, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, compression press, thermo press, double-column press, tryout press, tool try out press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer.

Būklė: geras (naudotas), Manufacturer: OMERA Type: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Throat depth, horizontal (HOR): 670 mm Throat depth, vertical (VER): 940 mm Stroke cylinder: 350 mm Column diameter: 200 mm Hodpfokvnumex Af Uel Specifications Metric / US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Būklė: naujas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: DF0277-Rev06, spaudimo jėga: 10 t, Hidrobrasil Vulcanizing Press – 10 t – Heated Press – 660 × 210 mm – with Heated Plates For sale: Hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 10 t. This machine is designed for thermal processes such as vulcanization and hot pressing applications, and features accurately guided heated plates as well as constant pressure maintenance over extended periods. Thanks to its safety monitoring and robust construction, this press is ideally suited for reliable use in laboratories and production environments. ==== Technical Data & Information: Hydraulic Vulcanizing Press – 10 t ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Machine Type: Heated Press - Design: Single-column/stand press - Pressing force: 10 t - Machine weight: approx. 1.5 t - Dimensions (L × W × H): approx. 2,000 × 1,420 × 760 mm ==== Working Area - Column clearance: 200 mm - Open height between heating plates: 200 mm - Stroke: 200 mm - Travel: 200 mm ==== Heating Plates & Structure - Heating plates: 660 × 210 mm - Table height: 1,100 mm - Table plate thickness: 125 mm - Ram height: 250 mm - Plates flat-ground (incl. thermal insulation plates and clamping surfaces) ==== Construction & Guidance - Chrome-plated, polished guidance columns - Parallel guidance via 250 mm high bronze guides - Counterweight system for easy door operation Hsdpfxeffamys Af Ujl ==== Process Parameters - Pressure maintenance: up to 5 hours - Pressure tolerance: max. ± 5 % ==== Hydraulics - Oil tank: 70 l ==== Safety & Operation - Electronic door monitoring - Interlock: ram movement only with door closed - Opening protection at >50 °C plate temperature - Manual override with safety release (“burn hazard” warning) ===== Vulcanization, hot pressing, thermal processes, laboratory applications, material testing Hydraulic press, hydraulic press, vulcanizing press, heated press, laboratory press, production press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply fully with the Brazilian national safety directive NR 12, which builds upon these standards. Our key strength lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. Press hydraulics are equipped predominantly with components from leading European manufacturers.

Būklė: naujas, mašinos/transporto priemonės numeris: DF0238 - Rev.00, spaudimo jėga: 20 t, Vulcanizing Press – Manufacturer Hidrobrasil – 20 t Heating Press For sale is a compact hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 20 t. The machine is equipped with heated platens sized 400 × 400 mm, precisely controllable temperature up to 300°C, and a modern Siemens control system, making it ideal for small-scale vulcanization, laboratory, and thermal pressing processes. ==== Technical Specifications & Information: Vulcanizing Press Hidrobrasil – 20 t Heating Press ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press Force: 20 t - Machine Weight: approx. 3 t - Dimensions (L × W × H): 2,200 × 650 × 2,540 mm ==== Working Area - Clearance Width: 400 mm - Daylight: 300 mm - Stroke: 300 mm - Table Height Above Floor: approx. 950 mm ==== Table and Ram - Table Plate: 400 × 400 mm - Ram Plate: 400 × 400 mm ==== Forces - Pressure Adjustment: 2 – 20 t (in 2 t increments) ==== Hydraulics - Drive Power: approx. 4.5 kW - Electric Oil Cooler - Pressure Holding Accuracy: ± 5 % - Cooling via integrated circulation pump (connection for external water supply) ==== Heating System - Electrically heated platens - Temperature Range: 50 – 300°C (in 5°C increments) - Temperature Tolerance: ± 5°C - Separately controllable heating plates ==== Control - Siemens S7-1500 - Adjustable: Pressure, speed, temperature, heating time, hold positions - Adjustable venting intervals - Data logging and export as Excel file Hedpsfxyhbefx Af Ujl ==== Equipment - Automatic vertical door - Warm air extraction with 150 mm connection and fan - Integrated machine monitoring systems ==== Options - Integrated cooling unit: €15,000 ===== Vulcanization, rubber processing, plastics processing, laboratory applications, small-batch production, thermal pressing processes, hot pressing Vulcanizing press, heating press, hydraulic press, laboratory press, rubber press, laminating press, thermo press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC norms, and EU safety standards. Furthermore, our presses exceed Canadian and European safety requirements as they comply fully with all aspects of the Brazilian national safety standard NR 12, which builds upon these standards. Our key strength lies in custom machine construction and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. The hydraulic systems in our presses primarily utilize components from leading European manufacturers.

Gamybos metai: 2024, būklė: naujas, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at our showroom in Staufenberg by prior appointment at any time. Additional machines are available for demonstration at our facility in Staufenberg. Hjdpfxeftdh Ie Af Uol Further information is available upon request.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, Cryogenic gas semi-trailer for LNG (liquefied methane). Manufacturer: CRYOCAN Hjdotulh Ijpfx Af Ujl EU approval. Year: 2011 Volume: 50.25 m³ Vacuum certificate available We also have other tankers for LIN, LOX, LAR, LNG and CO2 Argon, Oxygen, Nitrogen and Carbon Dioxide, Methane, Hydrogen

Gamybos metai: 1993, būklė: naudotas, TYPE: DEA 400/2000 Year: n.d. Ram Capacity: 400 tons Slide Stroke: 1,100 mm Max Shut Height: 1,600 mm Table Size: 2,000 x 1,600 mm Fast Stroke Speed: 650 mm/sec Cushion Capacity: 160 tons Cushion Stroke: 400 mm Overall Height (floor to top): 5,800 mm Hsdpfsihf R Uox Af Uel Distance Between Uprights (Front Opening): 3,400 mm Lateral Window Opening: 1,600 mm