C presas

Hidrobrasil Einständerpresse

Būklė: naujas, Gamybos metai: 2021, spaudimo jėga: 10 t, Single-column press with 10 T capacity, suitable for continuous shift operation, featuring the following basic specifications: a) Travel speed adjustable from 0 to 10 mm/sec downwards, b) Opening speed up to 25 mm/sec, c) Initial pressing speed 10 mm/sec, adjustable from 0 to 10 mm/sec, d) Table size 600 x 300 mm, e) Ram size 300 x 300 mm, with T-slots and central cylinder clamping, f) Overall dimensions approx. 1100 x 600 x 1850 mm, g) Oil temperature indicator on the oil tank, h) Pressure setting from 0.5 T to 10 T (adjustable via rotary knob), i) Cable remote control for up/down movement, j) Machine frame powder-coated or double painted, k) Control cabinet cable entry from above with 3000 mm cable and 16 amp plug, l) Installation, commissioning, and operator training available at additional cost. Design Press type: Single-column press Thermally neutral: 80–120°C Number of operator sides: 1 side Forces Press force max. (at 250 bar): 100 kN Free opening force max.: 10 kN Pressure build-up time (closed tool, steel on steel): max. 2 sec. Dimensions Max. opening: 800 mm Stroke and min. opening: 500/300 mm Table height above floor: 850 mm Height above floor (overall height): approx. 2850 mm Minimum hall height: 3,500 mm Parallelism deviation at 20°C: #ERROR! mm Deflection: Measured at max. closing force with 70% occupancy: ≤ 0.1 mm/m Weight Total weight of press without fluids: approx. 1.6 t Speeds Rapid close: 10 mm/sec Pressing speed: 10–0 mm/sec Sound pressure Sound pressure level measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics Number of press cylinders: 1 unit Operating pressure max.: 250 bar Pressure build-up time: 2 sec. Pressure accuracy during pressing stroke: #ERROR! bar Main pump: Gear pump approx. 6 L/min Oil volume: approx. 80 liters HLP 46 MW Gjdohma Smopfx Agdstw Ambient temperature max.: 40°C Oil temperature max.: 55°C Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection – main motor: 2.2 kW Total connected load: approx. 3 kW

Gamybos metai: 1977, būklė: naudotas, Weiler Matador VS2 lathe, year of manufacture approx. 1977, with collets, collet tube, 3-jaw chuck, and Multifix toolpost. Ways show wear in the front section. The machine is in operational condition and can be demonstrated under power by appointment. Gedpfx Asmdn Dxsgdotw

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 400 mm, bendras plotis: 1 500 mm, bendras ilgis: 2 400 mm, spaudimo jėga: 20 t, bendras svoris: 2 000 kg, įvesties srovės tipas: trifazis, valdymo spintos plotis: 80 mm, įėjimo įtampa: 400 V, valdymo spintos ilgis: 60 mm, galia: 22 kW (29,91 AG), įėjimo srovė: 32 A, aplinkos temperatūra (min.): 10 °C, aplinkos temperatūra (maks.): 40 °C, aukščio reguliavimo tipas: hidraulinis, Įranga: dokumentacija / vadovas, If this press does not precisely match your requirements, please request a customized quotation tailored to your specifications with just one click: Contact us for your personalized offer. HIDROBRASIL manufactures presses exactly to your needs at surprisingly affordable prices! ##### C-Frame Press 20 Ton Hand-Loaded Press 20 T Tablet Press, Single Column Press, C-Frame Press, Hand-Loaded Press Machine type: Hydraulic Single Column Press Year of manufacture: 2023 Location: Gelsenkirchen, Germany Technical data: - Pressing force: max. 20 tons (at 250 bar) - Free stripping force: max. 20 kN - Pressure build-up time: max. 2 seconds (closed tool, steel on steel) - Maximum opening width: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor: 800 mm - Overall height: approx. 2400 mm - Minimum hall height: 3,500 mm - Parallelism deviation: +/- 0.1 mm at 20°C - Deflection: 0.3 mm/m (at max. closing force with 70% table occupation) - Total weight: approx. 2 tons - Travel speeds: Rapid close 120 mm/s, Pressing speed 10–5 mm/s - Sound pressure level: max. 78 dB(A) measured at 15 m height at the control panel according to DIN 45635-T16-KL3 Hydraulics: Gedpfotv Ewdsx Agdetw - Number of press cylinders: 1 pc. - Operating pressure: max. 250 bar - Pressure accuracy during press stroke: +/- 5 bar - Main pump: gear pump approx. 10 L/min - Oil volume: approx. 150 liters (HLP 46 MW) - Ambient temperature: max. 40°C - Oil temperature: max. 55°C Electrics: - Main power supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 22 kW - Total connection load: approx. 6 kW Control cabinet: - Protection rating: IP 54 - Spare space: approx. 20% - Cooling: no - Interior lighting: no - Mode selector switch: lockable Equipment: - Light barrier: SICK/PILZ/SCHMERSAL - Position setting: via adjustable sensors - Pressure adjustment: 5 T to 20 T, adjustable via rotary knob - Two-hand operation: standard, optional foot operation available - Table plate: tray with 50 mm high rim and side outlet - Control cabinet: mounted on the right side of the press, IP 54 protection rating Function and operation: - Activation: via main switch - Pressure setting: via rotary knob - Cycle initiation: by two-hand operation or optional foot pedal - Safety features: compliant with EU regulations and accident prevention requirements (UVV) Special features: - Press tool parts: upper tool with 8 press rams, 3-piece lower tool - Pressing cycle: capable of producing 8–12 pressed parts per minute - Hydraulic unit: fully removable for maintenance work Service and warranty: - Monitoring and testing: according to DIN ISO 16092-3:2018 - Customer service: from Waibstadt or Gelsenkirchen - Documentation: in compliance with CE standards --- Looking for a tailor-made machine? Contact us for your personalized offer.

Būklė: naujas, Gamybos metai: 2022, spaudimo jėga: 15 t, Single-column press with 15 t capacity Suitable for continuous shift operation: a) Travel speed 10 mm/sec downward b) Opening speed up to 25 mm/sec c) Initial pressing speed 10 mm/sec d) Table size: 400 x 400 mm Godpfx Asitylgogdotw e) Ram size: 200 x 200 mm, with T-slots and central cylinder clamping f) Overall dimensions: approx. 1150 x 800 x 1750 mm g) Oil temperature gauge on oil tank h) Pressure setting from 5 t to 17 t (adjustable via rotary knob) i) Manual lever operation with two speeds j) Machine frame powder-coated or double-lacquered k) Control cabinet power supply from above with 3000 mm cable and 16 A plug l) Installation, commissioning, training subject to separate charge Press type: Single-column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces: Max. pressing force (at 250 bar): 150 kN Max. free opening force: 10 kN Pressure build-up time, closed tool, steel on steel: max. 2 sec. Max. opening width: 400 mm Stroke and min. opening: 350 mm Table height above floor: 850 mm Overall height above floor (total height): approx. 1900 mm Minimum hall height: 2,500 mm Parallelism deviation at 20°C: +/- 0.1 mm Measured at max. closing force with 70% occupancy

Būklė: naujas, Gamybos metai: 2024, Tunneltípusú mosóberendezés fém és műanyag alkatrészek tisztításához. Különböző iparágakban használható, például az autóiparban, élelmiszeriparban, fémmegmunkálásban, lemezmegmunkálásban, műanyag ládák tisztításához stb. Működési elv: A munkadarab szállítószalag segítségével jut be a tunnelbe; a pozícionált szórófejek minden felületet alaposan megtisztítanak. A munkadarab a tunnelben haladva nyomás alatt lévő és felmelegített víz + vegyszer keverékével kerül átmosásra. E folyamat során minden olaj, forgács, valamint egyéb ipari szennyeződés eltávolításra kerül a munkadarab felületéről. A tunnel típusú mosógépek szabványos, illetve az alkalmazásnak megfelelően egyedileg tervezett kivitelben is elérhetők az INTERSONİK mérnöki csapatának köszönhetően. Mosási folyamat: - Mosás - Passziválás - Szárítás A folyamatot az Intersonik folyamatmérnökei tervezték meg a kívánt eredmény és a környezetbarát Intersonik vegyszerek alkalmazásával. A működés folyamata: ► Előmosás ► Főmosás Gsdpfx Agjd I Azvodotw ► Öblítés ► Passziválás ► Szárítás Alkalmazási területek: ► Autóipar ► Katonai-védelmi ipar ► Élelmiszeripar ► Minden gyártóipar, ahol tömeggyártás vagy karbantartás zajlik ► Fém bútoripar A szállítószalagot az INTERSONIK az Ön igényeihez és a munkadarabhoz igazítva tervezi és gyártja. A szalag sebessége állítható. Az automatikus folyadékfeltöltés alapfelszereltség. Az elektromos fűtés standard, hőcserélős vagy égős fűtés opcióként választható. Minden adat digitális kijelzőn követhető és vezérelhető. A PLC vezérlés opcionális. Minden folyadéktartály hőszigetelt a hőveszteség csökkentése érdekében. A ködgyűjtő vákuumszivattyú és egység szintén alapfelszereltség. További opciókért és részletekért kérjük, vegye fel velünk a kapcsolatot. Kulcsszavak: tunnel mosó, automata mosó, autóipari alkatrészmosó, fémmosás, alkatrészmosó, zsírtalanítás, szórófejes mosó, nyomás alatt működő mosóberendezés

Būklė: naujas, Gamybos metai: 2021, spaudimo jėga: 17 t, Here are the technical specifications of the machine on offer: If the press does not precisely meet your requirements, simply click to request a custom quote tailored exactly to your needs: Contact us for a personalized offer. HIDROBRASIL manufactures presses precisely to your specifications at surprisingly competitive prices! Technical Data & Information: Hydraulic 17 T C-Frame Press C-frame press with 17 T performance, suitable for continuous operation, featuring the following basic parameters: a) Travel speed: 10 mm/sec downward b) Opening speed: up to 25 mm/sec c) Initial pressing speed: 10 mm/sec d) Table size: 400x400 mm e) Ram size: 200x200 mm, with T-slots and central cylinder clamping f) Overall dimensions: approx. 1150x800x1750 mm g) Oil temperature gauge on the oil tank h) Adjustable pressure from 5 T to 17 T (adjustable via rotary knob) i) Two-speed manual lever operation j) Machine body powder-coated or double painted k) Control cabinet cable feed from above with 3000 mm cable and 16 amp plug l) Assembly, commissioning, and operator training available at separate cost Press Design: C-Frame Press Thermal Neutral Zone: 80 – 120°C Number of operator sides: 1 side Forces Pressing force max. (at 250 bar): 170 kN Max. release force: 10 kN Pressure buildup time (closed tool steel on steel): max. 2 sec Dimensions Gtodpfx Agjgrki Sjdew Max. opening width: 250 mm Stroke and min. opening: 100 mm Table height above floor: 850 mm Height above floor (total height): approx. 2200 mm Minimum hall height: 2,500 mm Parallel deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% loading: ≤ 0.3 mm/m Weight Total weight of press (without media): approx. 1 tonne Speeds Fast closing: 10 mm/sec Pressing speed: 10 – 0 mm/sec Sound Pressure Sound pressure level (measured at 1.5m height at the control panel per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press cylinders: 1 Operating pressure max.: 250 bar Pressure buildup time (pressing): 2 sec Pressure accuracy during press stroke: +/- 5 bar Main Pump Gear pump: approx. 6 L/min Oil volume: approx. HLP 46 MW 100 liters Ambient temperature max.: 40°C Oil temperature max.: 55°C Feed temperature: °C Electrics Main power supply: 400 V AC Control voltage (hydraulic pumps): 24 V DC Frequency: 50 Hz Hydraulic main motor connection: 2.2 kW Total connected load: approx. 3 kW Design The press is designed as an oil-hydraulic C-frame press. The hydraulics and tank are positioned above or on the press. Hydraulic unit The hydraulic system is mounted on top of the press. Safety Equipment The press complies with current safety regulations (UVV) and all applicable EU standards and directives for the described scope of delivery, in their latest versions. Electrics / Controls The control cabinet with control, power, and safety components is mounted on the right side of the press. The press is operated via a manual lever control. Control Cabinet Features Protection class: IP 54 Spare space: approx. 20% Cooling: none Internal lighting: none Operating mode selector switch, lockable: yes

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 620 mm, bendras plotis: 850 mm, bendras ilgis: 1 869 mm, spaudimo jėga: 30 t, stalo plotis: 600 mm, stalo ilgis: 600 mm, bendras svoris: 2 900 kg, Weight approx. 2,900 kg Table plate size 600 x 600 x 100 mm, plus 50 mm free space behind the plate up to the press column Table fixing positions at 600, 800, 1000 mm Ram stroke 400 mm Motor 3 kW 60 liter hydraulic tank Gtodpfxevhcykj Agdew Downward speed 10 mm/sec Upward speed 24 mm/sec

Būklė: naudotas, Gamybos metai: 2007, mašinos/transporto priemonės numeris: 001669, Lg 33121 Single-sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Max. strip width: 600 mm Max. load capacity: 3,000 kg Max. coil outer diameter: 1,800 mm Expansion: hydraulic Pressure arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading station + decoiler traversing device Includes: Lg 33221 High-Performance Precision Leveler LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Max. pass-through width: 620 mm Number of leveling rollers: 9 Leveling roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Godpohigmbjfx Agdstw Leveling rollers are multi-supported to prevent deflection All rollers driven by distribution gearbox and cardan shafts. Used, as-is ex-stock, immediately available. Refurbishment available upon request. Delivery time as agreed. Further data coming soon or available on request.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1983, Press force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 - 120 mm Installation height: 450 mm (maximum stroke, top position) Ram reinforcement: 100 mm Table size: 850 x 810 mm Pass-through opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guidance - Hydraulic overload protection Gtodpfogpxc Sox Agdew - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Būklė: naudotas, Eccentric Punching Press HAULICK + ROOS Type RVD 125 Double Column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Godpfxohlnzkj Agdetw Table size: 880 x 800 mm Table opening: 470 x 140 mm Column gap: 900 mm Side column spacing: 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Shut height as shown: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double connecting rod drive with 4-point eccentric shaft bearing for off-center ram force absorption - Free-standing electrical cabinet - NC roller feeder EBU, width 250 mm, year 2003 - Separate control panel for roller feed unit - Coil direction from left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons