C Gestell Presse pirkti naudotą (63 367)

Sąlyga: naujas, Pressure: 100 Motor: 11 Installation height: 500 Max. stroke length: 400 Ram adjustment: 790 x 600 Table height: Floor to top edge of table - 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mm Approx. weight: 5,500 kg Oil capacity: 200 Type: Hydraulic C-frame press Capacity: 100 tons at 230 bar Control / Key switch modes: - Setup mode – Manual, without light curtain - Automatic mode – At full speed and with light curtain Hydraulic system: - Main cylinder: Ø 230 mm - Auxiliary cylinders: 2 units, Ø 50 x 30 mm - Auxiliary guides: 2 units, Ø 50 mm - Motor: 11 kW / 15 HP - Pump: 16 cc – 23 l/min, helical gear pump Speeds: - Approach: 110 mm/sec - Return: 200 mm/sec - Pressure phase: 9 mm/sec Machine dimensions: - Installation height: 500 mm - Stroke length: 400 mm - Ram plate: 790 x 600 mm (with T-slots) - Table plate: 790 x 600 mm (with T-slots) - Table height: 850 mm (from floor to top edge of table) Hydraulic accessories: - Hydraulic control block & components by REXROTH - Pressure adjustment via PLC (20 – 100 tons) - Adjustable speed via PLC - Air cooler - Pre-fill valve - Pressure-holding valve Control accessories: - Siemens S7-1200 control system - Main control cabinet - Safety PLC by SICK Bljdpjwrkctefx Aahjd - Light curtains by SICK (700 mm) - Linear encoder for stroke adjustment - 10" BEIJER touchscreen (German & English) - Movable two-hand control - Ethernet port for remote maintenance - Fault indicator with light and sound signal - Dual working area lighting - Side safety doors (fold-out) - Hydraulic proportional valves - Dual-channel safety control - Operation manual & parts list (German) - Conforms to current Machine Directive EN 693 Oil volume: 220 liters (tank volume: 250 liters) Total weight: approx. 5,500 kg Dimensions: 1,300 x 2,000 x 2,750 mm Paintwork: RAL 7035 Light Grey & RAL 7016 Anthracite Grey

Sąlyga: naudotas, Pneumatic press, compressed air press BOSCH type Serial no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 mm Bsdpfxeh U Dtuo Aahjld Ram surface: Ø 45 mm Maximum installation height: 235 mm Clamping shank bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force is infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic two-hand safety controls - Mounted on metal base frame with wooden panels Space requirements (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table substructure: 140 kg Good condition

Sąlyga: naudotas, Single-column hydraulic press DUNKES Type HZT 2.5 Machine No. H94-2558 Year of manufacture: 1994 Press force: 2.5 tons Throat depth: 180 mm Bedpfxsh Uhqyj Aahjld Table size: 420 x 300 mm Table opening: 60 x 185 mm Ram area: Ø 40 mm Clamping pin bore: Ø 20 mm Ram stroke: 160 mm Max. installation height: 250 mm Rapid downstroke: 65 mm/sec Rapid upstroke: 160 mm/sec Working speed: 8.3 mm/sec Table height above floor: 950 mm Hydraulic operating pressure: 135 bar Hydraulic tank capacity: approx. 100 liters Drive power: 1.5 kW Mains connection: 400 Volt, 50 Hz - Installation height can be increased by 80 mm by shortening the piston rod - Pressure and stroke shut-off - Two-hand operation at the machine - Stroke counter - Safe press control system with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for hand feeding operations) - 32,047 observed operating hours - Electrical and hydraulic schematics available Space requirement (L x W x H): 1100 x 980 x 1950 mm Weight: 700 kg Very good condition.

Sąlyga: naudotas, Single-Column Hydraulic Press HYDRAP Type HPSK 25 Serial No. 6312 Year of manufacture: 1989 Pressing force: 25 tons Ram stroke: 500 mm Throat depth: 300 mm Daylight opening: 700 mm Table area: 1000 x 500 mm Table bore: Ø 210 mm Ram area: 400 x 360 mm Clamping shank bore: Ø 40 mm Table height above floor: 855 mm Rapid approach speed: 280 mm/sec Pressing speed: 3.5 mm/sec up to 25 mm/sec Bledpfehrakvjx Aahed Return speed: 280 mm/sec Hydraulic tank capacity: 240 liters Drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz - Operation and programming via SIEMENS S5 with OP1 control - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely variable via manual pressure regulator - Short-stroke function - Mechanical tool clamping on the ram with T-slots and clamping shank bore - Control cabinet with electrical control mounted on the machine - Two-hand operation and electrical connection for foot switch - Control prepared for electrical tool monitoring - Hydraulic and electrical circuit diagrams available Required floor space (L x W x H): 1800 x 1200 x 2930 mm Weight: approx. 4 tons Good condition

Sąlyga: naudotas, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture: approx. 1984 Pressing force: 60 tons Throat depth: 160 mm Table size: 580 x 360 mm Ram surface: Ø 270 mm Clamping shank bore: Ø 40 mm Distance between frames: 218 mm Ram stroke: 60 mm Ejector stroke: 15 mm Ram adjustment travel: 30 mm Max. installation height: 300 mm (with intermediate table plate) Strokes: 70 strokes per minute Motor speed: 1,400 rpm Motor power: 3 kW Power supply: 380 Volts, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch/brake combination) - Intermediate table plate, L x W x H 580 x 360 x 58 mm, with bores and cut-outs - Mechanical ejector, ejection device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR safety enclosure with pneumatic front panel - Cam switchgear BALLUFF Required space L x W x H: 1400 x 1200 x 1850 mm Weight: 3 tons Good condition Bljdpfxsv Uraas Aahjd

Sąlyga: naudotas, Single-column hydraulic press SCHÖN Type FES / C 7 Machine no. 4281 Year of manufacture: 1995 Pressing force: 7 tons Throat depth: 170 mm Bedpfer I E Itex Aahsld Throat depth rotary indexing station: 60 mm Table size: 310 x 200 mm Rotary indexing table: Ø 400 mm, with 12 indexing stations Ram area: approx. Ø 100 mm Ram plate: 315 x 200 x 35 mm Ram stroke: 100 mm Installation height rotary table to ram plate max.: 130 mm Table height above floor: 890 mm Ram speed rapid downstroke: approx. 300 mm/sec Ram speed rapid upstroke: approx. 300 mm/sec Ram speed working stroke: approx. 30 mm/sec Drive power: 1.5 kW Electrical connection: 380 Volt, 50 Hz Tank capacity: approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7-1200 - Pneumatic rotary indexing table GECHTER with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time at bottom dead center - Electric two-hand control Space requirements (L x W x H): 1450 x 850 x 1900 mm Weight: 700 kg Good condition

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, stalo plotis: 760 mm, stalo ilgis: 2 700 mm, bendras svoris: 35 000 kg, spaudimo jėga: 250 t, įvesties srovės tipas: trifazis, galia: 30 kW (40,79 AG), perforavimo jėga: 250 t, įėjimo įtampa: 200 V, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Press Force: 160 t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Die Height (adjustable): 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Bledpfx Aeu Dxb Toahod Electrical Supply: 3x200V (!!), 30 kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Optionally available with decoiler and straightening machine.

Sąlyga: naujas, Gamybos metai: 2023, Nominal Pressing Force: 1,000 kN Ram Stroke, adjustable in steps: 16...140 mm Ram Adjustment: 90 mm Throat Depth: 295 mm Stroke Rate (idle): 70 / min Die Installation Height at Maximum Stroke (stroke down, adjustment up): 420 mm* Bjdpjdulidsfx Aahold Table Clamping Surface (W x D): 1,050 x 660 mm Ram Clamping Surface (W x D): 640 x 460 mm Pin Bore in Ram: 65 H7 mm Main Motor Power: 7.5 kW Machine Height approx.: 3,085 mm Machine Weight: 8,500 kg Equipped with hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, and the latest safety standards (UVV).

Gamybos metai: 2024, Sąlyga: paruoštas naudoti (naudotas), Maks. spaudimo jėga: 400 kN, maks. grąžinimo jėga: 30 kN, stūmoklio eiga: 400 mm, spaudimo greitis žemo/aukšto slėgio režimu: 9 mm/s, grįžimo greitis: 13 mm/s, maks. montavimo aukštis: 600 mm, išsikišimas: 300 mm, atrama į priekį: 150 mm, stalo aukštis: 900 mm, rėmo plotis: 250 mm, pavaros galia: 4 kW, ilgis: 1200 mm, plotis: 695 mm, aukštis: 2300 mm, svoris: apie 1 t. Presas vis dar originaliai supakuotas, nenaudotas, su priedais. Galima apžiūra vietoje, neatjungiant prie elektros. Blodpfx Aeylbr Reahsd

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, Gamintojas: AIDA Tipas: NC2-200 Spaudimas: 200 t Pagaminimo metai: apie 1991 Eigos ilgis: 150 mm Bodeyi Uxrspfx Aahjld Atstumas virš stalo: (reguliuojamas) 280–390 mm Stalas: 2700 x 760 mm Stūmoklis: 2100 x 700 mm Elektros galia: 3x200V (!!), 15 kW – Japonijos standartas Grynasis svoris: 27 000 kg Išmatavimai: 2475 x 2570 x 3625 mm Automatinė tepimo sistema. Automatinis pjovimo alyvos dozavimas – RAZIOL EST-02 Papildomai su diskinio vyniojimo ir tiesinimo įrenginiu.

Sąlyga: naudotas, Gamybos metai: 2025, bendras aukštis: 2 200 mm, bendras plotis: 800 mm, bendras ilgis: 1 450 mm, Savitasis svoris: 970 kg Kaina: pagal užklausą Mobilūs presavimo cilindrai - Gamybos metai: 2025 - Dokumentacija prieinama: Taip - CE ženklinimas: Taip - CE sertifikatas: Taip - Darbo valandos: 0 - Valdymas: konvencinis - Preso modelis: C-rėmo presas Bljdow N Su Dspfx Aahjd - Presavimo jėga [t]: 100 - Maks. eiga [mm]: 380 - Stalo ilgis [mm]: 1500 - Stalo plotis [mm]: 300 - Stūmoklio ilgis [mm]: 100 - Iškyša [mm]: 1100 - Aukščio reguliavimas [mm]: 750 - Variklio galia: 3,0 kW - Kolonų skaičius: 2 - Transportavimo matmenys: 1450 mm x 800 mm x 2200 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 970 kg - Transportavimo paketai [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir priėmimas mainais galimi bet kada visoms pramonės sritims Lukas van Rossum

Sąlyga: naudotas, Gamybos metai: 2025, bendras aukštis: 2 200 mm, bendras plotis: 800 mm, bendras ilgis: 1 100 mm, Tuščias svoris: 540 kg Kaina: pagal užklausą Judantis presavimo cilindras - Gamybos metai: 2025 - Dokumentacija: Yra - CE žymėjimas: Yra - CE sertifikatas: Yra - Darbo valandos: 0 Blsdpfow N St Hsx Aahed - Valdymas: Konvencinis - Preso modelis: C tipo karkasinis presas - Presavimo jėga [t]: 60 - Didžiausias eigos ilgis [mm]: 380 - Stalo ilgis [mm]: 1000 - Stalo plotis [mm]: 260 - Slaiderio eiga [mm]: 100 - Gylis iki staklių rėmo [mm]: 750 - Aukščio reguliavimas [mm]: 750 - Variklio galia: 2,2 kW - Kolonų skaičius: 2 - Transportavimo matmenys: 1100 mm x 800 mm x 2200 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 540 kg - Transporto pakuotės [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/diferencinė apmokestinimo schema: PVM atskaitomas įmonėms Galimas pristatymas ir keitimas bet kokiai pramoninei įrangai Lukas van Rossum

Sąlyga: naujas, Press force: 150Motor: 15Installation height: 500Stroke length (max.): 400Table size: 900 x 600Ram area: 900 x 600Table height: 850Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200Weight approx.: 8000Oil fill: 400Hydraulic C-frame Press General Information: Design: C-frame construction, hydraulic Pressing force: 150 t at 240 bar Return force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Paint: RAL 7035 – Light gray Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic operation (single stroke) with light sensor PLC control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke measuring system: Linear scale (500 mm) Touchscreen: 9'' Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free inputs/outputs for external connection (e.g., robot, coil system) Workspace lighting (double) Hydraulic System: Main cylinder: Ø 270 mm Auxiliary cylinders: 2 x Ø 70 x 40 mm Auxiliary guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary motor: 2.2 kW / 3 HP Pump: 45 cm³, 65 l/min – REXROTH Auxiliary pump: present Tank capacity: 500 l Oil volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, prefill valve, hydraulic & mechanical ram lock (top dead center position) Pressure & speed adjustable via PLC Bledpfewzzzfsx Aahed Mechanical Data: Installation height: 500 mm (distance ram – table plate) Stroke length: 400 mm Insertion depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top edge of table plate) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welds) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & Electronics: Main control cabinet Pressure & speed settings via PLC Swiveling operator panel Mobile two-hand operation SICK light sensors Stroke measuring system Display: 9'' Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety Side safety doors (sliding to the rear) Operating manual & parts list (German), incl. maintenance plan

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, hidraulinio cilindro reguliavimas: 100 mm, stalo ilgis: 600 mm, įrengimo aukštis: 1 900 mm, eigos reguliavimas: 130 mm, bendras svoris: 19 000 kg, spaudimo jėga: 160 t, aukščio reguliavimo tipas: elektrinis, galia: 11 kW (14,96 AG), perforavimo jėga: 160 t, įėjimo įtampa: 200 V, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, Manufacturer: AIDA Model: NC2-160 Press force: 160 t Year of manufacture: approx. 1991 Stroke length: 130 mm Bledou D Dhxepfx Aahed Shut height (adjustable): 285–335 mm Table size: 1900 x 600 mm Ram size: 1360 x 585 mm Electrical power: 3x200V (!!), 15 kW – Japanese standard Net weight: 19,000 kg Dimensions: 2140 x 2210 x 3175 mm Automatic lubrication system. Optional with decoiler and straightening machine.

Sąlyga: naudotas, Vieno stovo ekscentrinė štampavimo presas WEINGARTEN tipas EV 63 Mašinos Nr. 738 / 61 Pagaminimo metai: 1962 Presavimo jėga: 63 t Iškyša: 260 mm Stalo matmenys: 630 x 530 mm Stalo anga: Ø 210 mm Presavimo galvutės matmenys: 315 x 260 mm Presavimo eiga reguliuojama: 8-100 mm Presavimo galvutės reguliavimas: 63 mm Tvirtinimo kaiščio skylė: Ø 40 mm, su fiksavimo elementu Montavimo aukštis maks.: 450 mm Smūgių dažnis: 115 smūgių/min. Suslėgto oro poreikis: min. 4,5 bar Variklio galia: 4 kW Bljdpfok S Htxox Aahjd Maitinimas: 380 V, 50 Hz Stalo aukštis nuo grindų: apie 750–900 mm - Elektrinis eigos paleidimas per pakojų jungiklį arba dviejų rankų valdymą - Apkrovos apsauga per lūžtančią plokštę - Sankabos-stabdžio kombinacija su WEINGARTEN frikcine sriegine sankaba ir TDP viršutinės padėties sauga - Priekinis alkūninio veleno atraminis guolis - Presavimo stalas reguliuojamas aukščiu su 2 sriegio velenais - Rankinis centrinis tepimas - Elektros skydas šalia - UVV rankiniam įdėjimui Užimamas plotas (I x P x A): 1750 x 1600 x 2430 mm Svoris: 4,5 t Gera būklė

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 620 mm, bendras plotis: 850 mm, bendras ilgis: 1 869 mm, spaudimo jėga: 30 t, stalo plotis: 600 mm, stalo ilgis: 600 mm, bendras svoris: 2 900 kg, Weight approx. 2,900 kg Table plate size 600 x 600 x 100 mm, plus 50 mm free space behind the plate up to the press column Table fixing positions at 600, 800, 1000 mm Ram stroke 400 mm Motor 3 kW 60 liter hydraulic tank Downward speed 10 mm/sec Upward speed 24 mm/sec Blsdpfxevhcyke Aahod

Sąlyga: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: EEP-30.22070 A.D, gerklės gylis: 180 mm, hidraulinio cilindro reguliavimas: 60 mm, stalo aukštis: 700 mm, bendras aukštis: 2 150 mm, pramušama skylė stalo paviršiuje: 150 mm, stalo plotis: 580 mm, stalo ilgis: 360 mm, bendras plotis: 1 500 mm, bendras ilgis: 1 250 mm, bendras svoris: 1 900 kg, spaudimo jėga: 45 t, atstumo lentelė iki stūmoklio: 350 mm, eigos ilgis: 90 mm, galia: 4 kW (5,44 AG), suslėgto oro jungtis: 6 juosta, įėjimo įtampa: 380 V, eigos dažnis (maks.): 145 aps./min, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, Parduodama: ELMALI EEP-PK45 C tipo ekscentrinis presas – beveik naujos būklės (+ nemokamas kompresorius) Parduodame praktiškai nenaudotą ELMALI EEP-PK45 ekscentrinį presą, pagamintą 2022 m. Turkijoje. Šis tvirtas C rėmo presas užtikrina 45 tonų presavimo jėgą, todėl puikiai tinka tiksliam metalo formavimui. Įranga niekada nebuvo naudota gamybos procesuose, yra puikios būklės, paruošta nedelsiant eksploatacijai. - Plieninė rėmo konstrukcija - Slydikas ir panašios dalys – plieno liejiniai Bljdpfx Aajxq Sbfohsd - Pneumatinės sankabos ir stabdžio derinys - 4 kreipikliai slydikui - Slydiko reguliavimas - Pagrindinis ir papildomas stalas su T formos grioveliais - Vienkartinis arba nenutrūkstamas stūmimas - Kojinis arba dviejų rankų valdymas - Centrinė tepimo sistema - Pavara alyvos vonelėje - Šviesos užuolaidos saugos sistema - Spaudalų reguliavimas ir atbulinė eiga Su šiuo įrenginiu nemokamai pridedamas KÄSER Premium 200/24W tipo kompresorius.

Sąlyga: labai geros būklės (naudotas), Here we offer you a TOX insertion press TOX-C-frame press. TOX Pressotechnik insertion press TOX-C-frame press Pneumohydraulic manual workstation with process monitoring for the installation of functional elements. Technical Data: Press type: EMB 030.068.A.001 Bjdpfxehhil Te Aahsld Drive: KWE3O.0O.17O.10H Pneumatic connection: G3/4'' Compressed air preparation: filtered and dried compressed air, max. particle size 40 µm Air pressure during operation: Pmin. = 3.0 bar, Pmax. = 6.0 bar Pressing force: 170 kN Total stroke / effective stroke: 170 mm / 10 mm Control unit: STE 326-366-3/4"-90-230V/AC special, complete Electrical connection: 90-230V/AC Ambient temperature during operation: Tmin. = 10°C, Tmax. = 60°C TOX press-in monitoring: EPW 500FP force / travel measurement Support device: ZHE for TOX press Installation dimensions: width 1917.5 mm, height 2506 mm, depth 1917.5 mm Safety guarding: Leuze B20/B21 light curtain Press-in tool: see (photos 15 to 18) Press-in bushing (photo 17): 24.5 mm diameter Area of application: press-in operations Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used Scope of delivery: (see image) (Subject to modifications and errors in the technical data and specifications!) If you have further questions, we are happy to answer them by phone.

Sąlyga: naudotas, Gamybos metai: 1978, mašinos/transporto priemonės numeris: 4788, Bendra presavimo galia: 35 t Iškyša: 225 mm Stūmoklio eiga: 8 - 80 mm Stūmoklio reguliavimas: 50 mm Įrengimo aukštis (eiga apačioje, reguliavimas viršuje): 325 mm Stalo tvirtinimo paviršius apie: 600 x 450 mm Stūmoklio tvirtinimo paviršius apie: 300 x 225 mm Eigos per minutę: 160 min⁻¹ Galingumo poreikis: 2,2 kW Blodpow Tukiofx Aahsd Matmenys IxPxA: 1000 x 1600 x 2200 mm Mašinos svoris apie: 1,9 t

Sąlyga: naudotas, Gamybos metai: 1972, mašinos/transporto priemonės numeris: 1171, Total pressing force: 160 t Throat depth: 350 mm Bledouqdwxjpfx Aahed Ram stroke: 20 - 140 mm Ram adjustment: 75 mm Shut height (stroke bottom, adjustment top): 740 mm Table clamping surface approx.: 1000 x 680 mm Ram clamping surface approx.: 600 x 300 mm Strokes per minute: 50 min-1 Power requirement: 15 kW Machine weight approx.: 12 t Standard equipment Machine includes: fencing HS Decoiler M 15 / 500 – Year of manufacture: 2009 Material width 15 - 500 mm Coil weight 1.5 t Coil outside diameter 1400 mm Coil inside diameter 380 - 530 mm HS Straightening Machine RME 40 - 9 – Year of manufacture: 2009 Material thickness 0.4 - 2 mm Number of feed rollers: 2 pcs Number of straightening rollers: 9 pcs Straightening roller diameter: 61.9 mm Feed roller diameter: 61.9 mm Feeding speed: 40 m / min Feed length: 0 - 9999.99 mm Additional equipment In 2009, the machine was retrofitted to SIEMENS S7.

Sąlyga: naudotas, Pressing force: 50 t Bljdpewyplcjfx Aahjd Throat depth: 265 mm Stroke: 250 mm Installation height: 400 mm Table clamping area approx.: 700 x 450 mm Ram clamping area approx.: 550 x 300 mm Table height above floor: 850 mm Rapid traverse down: 32 mm / s Working speed: 6.3 mm / s Rapid traverse up: 42 mm / s Power requirement: 4 kW Dimensions LxWxH: 1290 x 1160 x 2085 mm Machine weight approx.: 1.75 t Standard equipment: Siemens S7-1200 control, working cycle, inching mode, foot switch, mechanically adjustable stop, light curtain Automation: Optionally available including HORST robot on request.

Sąlyga: naudotas, Gamybos metai: 1971, mašinos/transporto priemonės numeris: 7130, Total pressing force: 60 t Throat depth: 275 mm Bledpeuqcxnsfx Aahed Ram stroke: 5 - 100 mm Installation height (stroke down, adjustment up): 375 mm Table clamping area approx.: 740 x 470 mm Strokes per minute: 14 - 100 min⁻¹ Power requirement: 10 kW Dimensions (LxWxH): 2,300 x 1,500 x 3,000 mm Machine weight approx.: 3.5 t

Sąlyga: naudotas, Gamybos metai: 1970, Pressing force: 30 t Throat depth: 160 mm Adjustable ram stroke: 20 - 45 mm Ram adjustment: 10 / 60 mm Installation height (stroke down, adjustment up): 220 mm Table clamping surface approx.: 470 x 300 mm Ram clamping surface approx.: 250 x 190 mm Strokes per minute: 80 - 240 min-1 Power requirement: 4 kW Dimensions (LxWxH): 1,400 x 1,800 x 2,000 mm Machine weight approx.: 2.67 t Bsdpfeuqc Enox Aahjld Standard features The machine's electrical system was modernized in 2015.

Sąlyga: naudotas, Gamybos metai: 1983, mašinos/transporto priemonės numeris: 5154, Total pressing force: 25 t Throat depth: 250 mm Ram stroke: 6 - 60 mm Ram adjustment: 50 mm Installation height (stroke down, adjustment up): 190 mm Clamping plate thickness: 50 mm Table clamping surface approx.: 500 x 400 mm Ram clamping surface approx.: 350 x 250 mm Clamping pin hole in ram: 40 H7 mm Number of strokes per minute: 160 min⁻¹ Dimensions LxWxH: 1,300 x 1,500 x 1,995 mm Machine weight approx.: 2 t Additional equipment: Blodpfeuqc Hfox Aahod Tiltable press body

Sąlyga: naujas, Pressure: 100Motor: 15Installation height: 500Stroke length (max.): 400Table size: 800 x 600Ram area: 800 x 600Table height: 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750Weight approx.: 5,500Oil filling: 200Control / Key switch: 1. Setup mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guide: 2 pcs Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110mm/sec – Return 200mm/sec – Pressure: 9mm/sec Installation height: 500mm Stroke length: 400mm Table plate: 800 x 600 – (with T-slots) (custom design available) Ram plate: 800 x 600 – (with T-slots) Table height: 850mm (floor to top of table plate) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Prefill valve Control accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150mm Linear scale for setting the stroke length 9” PLC screen – Siemens (German & English) Mobile two-hand control Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) 2-fold workspace illumination 8 free inputs & outputs on the PLC for external connections The press complies with machinery directives Hydraulic proportional valves Bljdpfx Aem Nntyeahod Dual-channel cable protection Operating manual & parts list (German) With lateral safety door (doors can be slid to the rear)