Ekscentriškas Spauda pirkti naudotą (2 620)

Sąlyga: naujas, Gamybos metai: 2023, Nominal Pressing Force: 1,000 kN Ram Stroke, adjustable in steps: 16...140 mm Ram Adjustment: 90 mm Throat Depth: 295 mm Stroke Rate (idle): 70 / min Die Installation Height at Maximum Stroke (stroke down, adjustment up): 420 mm* Ljdpjdulidsfx Abrohc Table Clamping Surface (W x D): 1,050 x 660 mm Ram Clamping Surface (W x D): 640 x 460 mm Pin Bore in Ram: 65 H7 mm Main Motor Power: 7.5 kW Machine Height approx.: 3,085 mm Machine Weight: 8,500 kg Equipped with hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, and the latest safety standards (UVV).

Gamybos metai: 1990, Sąlyga: naudotas, Pressure: 75 t Throat depth: 300 mm Stroke: 8 - 110 mm Table size: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Passage opening in table: 250 x 150 mm Ram bore: 40 mm Strokes per minute: 60 + 90 spm Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram at bottom stroke, ram down: 19 mm Distance table/ram at top stroke, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for attaching tool change consoles - 2 roller rails in table - mechanical overload in ram (shear plate) Lhodpfxed Nl E Uj Abrec The following work will be carried out on the machine / partial refurbishment: - Machine will be completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine will be repainted - New Balluff cam switchgear - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication - New control cabinet with touch panel and ABB safety control - Current safety inspection (German UVV) including brake time measurement

Sąlyga: naujas, Press pressure: 40 t Reach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Through-hole in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Lodeb U Hwmjpfx Abrjhc Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination by Ortlinghaus - Central lubrication by Vogel - Cam controller by Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Sąlyga: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Lhjdob U Hwpepfx Abrsc Stroke rate: 160 strokes/min Ram area: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Pass-through opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam switch gear Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Gamybos metai: 1977, Sąlyga: naudotas, Pressure 40 t Outreach - mm Stroke 8 - 90 mm Table dimensions 630 x 430 mm Ram adjustment 60 mm Max. stroke rate 65 strokes/min Total power requirement kW Machine weight approx. 2,480 kg Space requirement approx. m - Gear drive for wheels - Tiltable Lsdpfx Aob U Hxfobrehc - Table clamping plate - Mechanical overload protection in the ram (shear plate) - Pneumatic clutch

Gamybos metai: 1971, Sąlyga: naudotas, Pressure: 160 t Throat depth: 440 mm Stroke: 20 - 120 mm Table surface: 1050 x 750 mm Strokes per minute: 42 and 62 spm Ram surface: 800 x 500 mm Pin bore (depth x diameter): 85 x 50 mm Table through-hole: 355 mm Installation height (stroke down, ram adjustment up): 455 mm Ram adjustment: 100 mm Machine weight approx. 11.2 t *with gear drive *with fixed work table *with enlarged table and ram surface *with extended throat depth *with pass-through in the frame *with ram counterbalance Lhodpocyc Adjfx Abroc The machine is currently being inspected and, for this, the clutch has been disassembled. (Currently, the press is in a dismantled state.)

Sąlyga: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating energy: 1370 Nm Single stroke energy: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Lsdjb U Hwnjpfx Abrjhc Passage opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Passage opening in table: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Sąlyga: naudotas, Pressure: 55 t Throat depth: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Lhedpfx Aecp Apyjbroc Strokes per minute: 120 spm Ram adjustment: 55 mm Ram area: 290 x 210 mm Ram bore: 40 H7 mm Pass-through opening in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight: approx. 3.4 t Space requirements: approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Vogel central lubrication system - Balluff cam switchgear - Height-adjustable table - Mechanical ram overload protection (shear plate) - Control cabinet with touchscreen - Foot switch

Sąlyga: naujas, Pressure: 40 t Outreach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram area: 185 x 180 mm Ram bore: 40 H7 mm Table through-hole: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx. 2.7 t Space requirement approx. 1.4 x 1.1 x 2.1 m Ljdjb U Hwtjpfx Abrshc - Hydraulic clutch-brake combination - Central lubrication (Vogel) - Cam control system (Balluff) - Control cabinet with touchscreen - Height-adjustable table - Foot switch

Sąlyga: naudotas, Press capacity: 63 t Outreach: – mm Stroke: 16 – 125 mm Table size: 800 x 600 mm Working capacity: 250 Shearing area: 1600 mm² Table adjustability: 220 mm Total power requirement: 6 kW Machine weight approx.: 5 t Distance table/ram: 562 mm The machine will be dismantled and partially overhauled Lodpfx Ajch Umcobrohc – new paintwork – new control cabinet – conversion for safe operation – repair/maintenance

Gamybos metai: 1980, Sąlyga: naudotas, Pressure: 80 t Outreach: – mm Stroke: 50 mm Table surface: 875 x 695 mm Lodpsdlcy Hjfx Abrshc Ram surface: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30 – 90 Gap width: 450 mm Machine weight approx. 6.2 t Space requirement approx. 2.0 x 2.1 x 3.2 m Installation height (stroke down, ram adjustment up): 480 mm Further information: - The machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate free-standing control cabinet with touchscreen, including wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine is safe for manual loading operation at open tools. Before delivery, a current UVV safety inspection and brake time measurement will be carried out.

Sąlyga: naudotas, Pressure: 200 t Throat depth: — mm Stroke: 250 mm Table size: 2420 x 840 mm Ram area: 1850 x 650 mm Lhedpfxsgk Rfzj Abroc Installation height: 500 mm Ram adjustment: 110 mm Frame clearance: 1900 mm Table height: 170 mm Strokes per minute: 25 - 45 spm Total power requirement: 22 kW Space requirements: approx. 2550 x 2370 x 3820 mm Weight: 30 t - Pneumatic clutch - Press safety valve, Herion - Cam switchgear, Balluff - Chain break monitoring - Hydraulic overload protection, HYDAC - Motorized ram adjustment with digital display - Free-standing control cabinet with ABB safety controller - Separate two-hand control station with foot switch - Sliding side safety doors - Front safeguarding via light curtains – vertical and horizontal The machine shown and described above is safe for manual loading operations. The machine can also be supplied in a different variant or as an automatic version with feed system. Features and equipment can be configured in consultation with the customer.

Gamybos metai: 1990, Sąlyga: naudotas, Pressure: 80 t Throat depth: 250 mm Stroke: 5/95 mm Table surface: 805 x 510 mm Ljdpfxefn Aqns Abrehc Distance table/ram at bottom stroke: 400 mm Ram bore diameter: 45 mm Ram adjustment: 100 mm Ram surface: 360 x 300 mm Strokes per minute: 55 spm Total power requirement: 5.5 kW Machine weight approx.: 4 t Space requirement approx.: 0.83 x 1.7 x 2.6 m - Ram weight balance The machine will be partially overhauled at our facility next year (disassembly, inspection, new paint, new wiring, new control cabinet).

Gamybos metai: 1986, Sąlyga: naudotas, Presskraft 15 t Installationshöhe - mm Lsdpfx Asfn Apxsbrjhc Hubzahl pro Minute 200 - 2000 Tischfläche - mm Stößelfläche 490 x 200 mm Blechbreite 5 - 50 mm Hubverstellung 10-30 mm Gewicht 3 t Abmessungen 1370 x 1200 x 2200 mm Antriebsleistung 10 kW Durchgangsöffnung im Tisch 350 x 100 mm Tischbreite 530 / 210 mm Tischlänge 530 / 350 mm Nur 2 Jahre im Einsatz Schnellläufer

Gamybos metai: 1965, Sąlyga: naudotas, Pressure: 150 t Throat depth: 550 mm Lhedpscubatsfx Abroc Stroke: 10 - 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirement: approx. 3 x 1.7 x 3 m - with auxiliary brake - Ram weight compensation - Motorized ram adjustment - Centralized grease lubrication (manual) - Break-out plate - T-slot clamping plate - Safe for manual loading operations - Operating manual available

Sąlyga: naudotas, Pressure: 160 t Installation height: 600 mm Stroke: 25 - 150 mm Table size: 1500 x 900 mm Ram area: 1500 x 900 mm Lodpfxecgqvpj Abrehc Ram adjustment: 100 mm Clearance between guides: 1500 mm Passage in side columns: 400 x 200 mm Column spacing: 1680 mm Machine weight approx. 15 t Space requirement approx. 2.7 x 1.8 x 4.4 m 2003 Modernisation / Retrofit The following work is still to be carried out on the machine: - New control cabinet with ABB PLC - Separate two-hand control panel with foot switch - Vogel loss lubrication system

Sąlyga: geras (naudotas), Gamybos metai: 1965, mašinos/transporto priemonės numeris: 951065, - Spaudimo jėga: 22 t - Išsikišimas: 175 mm - Eigos greitis: 120 1/min - Stūmoklio reguliavimas: 50 mm - Stalo aukščio reguliavimas: 50 mm - Eigos reguliavimas: 8-80 mm - Stalas: 520 x 400 mm - Stūmoklis: 250 x 160 mm - Tvirtinimo skląstis su kaiščio fiksacija, D35 mm - Variklio galia: 1,5 kW - Labai tylus veikimas - Mechaninis sukimo sankabos atjungimas per pneumat. cilindrą - Pneumatinis kojinis jungiklis - Be UVV - 4 vnt. mašinos kojos Ljdpfed Atnvex Abrjhc - Maitinimo kabelis su CEE kištuku 16 A - Oro prijungimas su greituoju jungikliu - Svoris: apie 2.000 kg - Matmenys: plotis 820 x gylis 1100 x aukštis 1800 mm

Sąlyga: naudotas, Gamybos metai: 1973, mašinos/transporto priemonės numeris: 104530, Throat depth: 350 mm Table size: 690 x 840 mm Lsdjddhw Sjpfx Abrohc Table through hole: 160 mm diameter Ram surface: 450 x 600 mm Ram adjustment: 80 mm Stroke adjustment: 8 - 100 mm Strokes per minute: 60 Drive motor: 380 V, 5.5 kW Space requirement: 1850 x 1850 x 2650 mm Weight: 6800 kg

Gamybos metai: 1972, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Lhedpfjb Tdquex Abrec Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t

Gamybos metai: 1978, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 455 178, Pressing force: 45 t Throat depth: 230 mm Table size: 460 x 690 mm Table through-hole: 175 x 220 mm Table adjustment: 160 mm Ram surface: 185 x 360 mm Ram adjustment: 55 mm Stroke adjustment: 4 - 80 mm Strokes per minute: 120 /min Lodsdd Irgepfx Abrohc Drive motor: 380 V, 3 kW Space requirement: 1800 x 1100 x 2100 mm Weight: 2800 kg

Gamybos metai: 2013, Sąlyga: labai geros būklės (naudotas), 1. SCOPE OF SUPPLY • EBU H 12 FT Eccentric Press • Siegfried SPC Control Unit 2. DOCUMENTATION • Complete operating documentation available 3. TECHNICAL SPECIFICATIONS Year of manufacture: 2013 Type: Eccentric Press Rated force: 120 kN Maximum tool installation height: 170 mm Maximum upper tool weight: 25 kg Stroke adjustment range: 30 mm Ram height adjustment: 40 mm Lodpfxsfrzlmj Abrehc Strokes per minute: 40-200 1/min Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1200 kg

Sąlyga: naudotas, Gamybos metai: 1987, mašinos/transporto priemonės numeris: 5347, Pressure: 10 t Throat depth: 180 mm Stroke: 8–60 mm Strokes per minute: 180 spm Table size: 400 x 340 mm Table height above floor: 935 mm Table through-hole: 80 mm Ram adjustment: 40 mm Ram surface: 180 x 110 mm Total power requirement: 1.1 kW Machine weight approx.: 0.6 t Space requirement approx.: 1.2 x 1.5 x 2.0 m - Two-hand and foot operation Lodpfx Abscxxygorshc - Control cabinet

Sąlyga: naudotas, Gamybos metai: 1970, mašinos/transporto priemonės numeris: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Lhjdpjfx Hv Hofx Abrjc Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Passage opening in table: 240 mm Passage opening in clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable design via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or underneath (360 x 160 mm), centralized lubrication via hand pump, additional clamping plate (700 x 480 x 850 mm), two-hand operation, foot release configurable, mode selector switch for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Sąlyga: naudotas, Gamybos metai: 1979, Pressure: 64 t Reach: 315 mm Stroke: 8-100 mm Strokes per minute: 140 spm Table size: 820 x 630 mm Table height above floor: 800 mm Ram stroke adjustable min./max.: 8-100 mm Ram adjustment: 63 mm Total power requirement: 7.5 kW Lhodpfxscxxmfj Abrec Machine weight approx.: 4.8 t Space required approx.: 1.45 x 1.70 x 3.10 m

Sąlyga: naudotas, Gamybos metai: 1967, Pressure: 80 t Throat depth: 280 mm Stroke: 20-120 mm Table width: 710 mm Table depth: 560 mm Ram dimensions: 560x355 mm Ram adjustment: 72 mm Strokes per minute: 125 spm Total power requirement: 9.5 kW Lhjdpecxxrhsfx Abroc Machine weight approx.: 4.4 t UVV (Accident Prevention Regulation)