Ekscentriškas spauda

MULLER 160t

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 160 t, stalo plotis: 1 000 mm, stalo ilgis: 1 000 mm, bendras svoris: 20 000 kg, Įranga: apsaugos šviesos užtvara, Müller 160 T Press Hydraulic press in excellent technical condition for sale, originating from a decommissioned stamping plant in Poland. Retrofit carried out in 2016. Equipped with a new Simatic S7 control system and a new electrical cabinet. Optical safety barriers installed. Ppodpfsv Hpulsx Ah Hel The machine can be inspected under power – the press remains connected to the electrical supply.

Sąlyga: naudotas, Gamybos metai: 1977, Pressure: 250 t Podpfx Asvuuaioh Hopl Stroke: 40 - 190 mm Stroke rate: 40 /min Throat depth: 500 mm Clearance between frame sides: 1050 mm Installation height: 615 mm Table size: 1380 x 880 mm Pass-through opening in table: 450 mm Table height above floor: 800 mm Ram area: 1200 x 800 mm Ram adjustment: 125 mm Drive power: 22.0 kW Weight: 24.0 t Required floor space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Approved for manual feeding operations in compliance with German accident prevention regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, clamping plate, two-hand control.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, bendras svoris: 35 000 kg, spaudimo jėga: 250 t, įvesties srovės tipas: trifazis, galia: 30 kW (40,79 AG), perforavimo jėga: 250 t, įėjimo įtampa: 200 V, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Press Force: 160 t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Die Height (adjustable): 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30 kW – Japanese standard Net Weight: 35,000 kg Ppsdpfx Aou Dxb Tsh Hel Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Optionally available with decoiler and straightening machine.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Technical Data: Cone Rolling Machine Working width: 1050 mm Max. bending capacity for mild steel St40: 4.0 mm Diameter of conical top roll: 70 - 185 mm Diameter of side and central lower rolls: 105 mm Conical bending device Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tons Condition: Pedpfxsw An Uhs Ah Hspl Very little used, as new condition The seller does not assume liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any guarantee.

Sąlyga: geras (naudotas), Gamybos metai: 2002, From business closure: Peddinghaus Peddimax 1002 Year of manufacture: 2002 Max. punching and shearing capacity: 1,000 kN Podpfx Ahjt Iklks Hjpl Punches 31 mm holes in 25 mm steel Shears flat bar up to 500 mm length with a material thickness of up to 18 mm steel Contact length stop included A wide range of accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 100 mm, maks. lakšto storis: 50 mm, plieno lakšto storis (maks.): 50 mm, bendras ilgis: 2 210 mm, bendras plotis: 1 530 mm, bendras aukštis: 1 940 mm, bendras svoris: 1 200 kg, įėjimo įtampa: 400 V, ruošinio aukštis (maks.): 50 mm, galia: 6 kW (8,16 AG), įėjimo srovė: 18 A, Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100mm working width. The DM1100 C performs edge rounding and removes sharp edges on both outer and inner contours of stainless steel, steel, or aluminum parts that have been cut by laser, shear, or punch machines. This machine processes parts of various sizes, including products starting from 50x50mm. The DM1100 C is equipped with a station featuring double cross belts for edge rounding, producing clean, smooth, and burr-free edges across the entire part. DM1100 C Working capacity (mm): 1100x50 Number of cross belt stations: 1 Cross belt speed (m/s): 2-8 Feed speed (m/s): 0.6-3.2 Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.18 Total power (kW): 6 Power consumption (A): 18 Exhaust connection per head (Ø mm): 150 Dimensions (mm): 2213x1530x1940 Weight (kg): 1200 Ppodpfotzfntsx Ah Hsl

Sąlyga: naudotas, Combined Section Steel Shear and Punch GEKA Type HYD 80 / Hydracrop 80/A Machine No. 9566 Year of manufacture approx. 2000 Punching force: 80 tons Throat depth: 300 mm Punching up to Ø 40 mm in 14 mm sheet Flat bar shear: 450 x 15 mm Angle steel shear: 130 x 130 x 13 mm Square bar shear: 45 x 45 mm Ppedorz Tutjpfx Ah Hsl Round bar shear: Ø 45 mm Rectangular notcher: up to 12 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Stop with electric stroke release, 500 mm - Worktable with stop at punching station: 550 x 380 mm - Working height at punching station: 1100 mm - Worktable with stop at rectangular notcher: 550 x 400 mm - Working height at rectangular notcher: 930 mm - Approx. 21 assorted punching tools - Operating manual - Original paint, not repainted Space requirements (L x W x H): 1800 x 1150 x 1950 mm Weight: 1.7 tons Very good condition

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Condition of the machine is very good, it has performed only 123,000 operations. CNC-controlled automatic machine, designed for processing welded frames. Independent drive and control system. Multiple use of the same processing time Operates in a welding and cleaning line Does not require additional floor space in the hall Can be adapted to work in a sash production line All operations are performed during the cooling phase: drainage vent grooves vent holes in colored profiles drilling of frame for mullion connector drilling of holes in the frame for hinges (x6) The center has its own frame transportation system from welder to cleaner SPS, NC control Podpfx Ahjm Ak R Uo Hjpl User-friendly visualization

Gamybos metai: 1991, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 07282, Offer 22336 Technical Data: - Max. working width: 3030 mm - Max. sheet thickness without pre-bending: 4 mm - Max. sheet thickness with pre-bending: 3 mm Ppedpfxjmdqllj Ah Hol - 3 driven rollers - Roller diameter top / bottom: 205 / 185 mm - Working speed: m/min - Drive – brake motor: 400 V / 7.5 kW - Required space: approx. W 5500 x D 1400 x H 1300 mm - Weight: approx. 4.7 t - with pre-bending function - Rear roller adjustable at an angle - Swing-out bearing for pivoting the top roller - Extended roller ends for mounting profile rollers - Forward and reverse operation - Separate control panel

Gamybos metai: 2006, Sąlyga: labai geros būklės (naudotas), 70 linear meters Pallet Rack SSI Schäfer Palflex incl. wire mesh decks Used equipment, good condition, see pictures Year of manufacture: 2006 Height: 4 m Depth: 120 cm Bay load: 12,000 kg Galvanized uprights Red beams Wire mesh decks included! 2 decks per 2.7-meter beam Pedpfx Ahekx E I Ne Hopl Asking price: € 6,950,-- net ex stock Offer includes: + 26 pre-assembled uprights, depth 120 cm, height approx. 4 m + 100 beams, length 2.7 m, 1,500 kg shelf load (evenly distributed load) + 200 locking pins + 100 galvanized wire mesh decks for 50 levels of 2.7 m beam length + 104 concrete anchors + Load capacity signs Stock item. Transport and installation available on request. Viewing possible by appointment at any time. Further information upon request. Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. (Technical data, information and prices subject to change and error. Sale subject to prior sale! See our T&Cs, all prices excl. VAT ex stock.) Purchase / Sale We are constantly looking for, or offering, numerous items from various sectors broom-clean clearances business liquidations Fast - flexible - all-in-one! We can also clear or dispose for insolvency administrators. Send us a quick note with your requirements and we will get back to you immediately. To visit our page, simply click on our logo!