Ex Spaudos Centras pirkti naudotą (17 723)

Būklė: labai geros būklės (naudotas), For sale: well-maintained Helmerding eccentric press. Very little used! Fedpfx Ahefdnw Hswjfw

Būklė: naujas, Gamybos metai: 2023, Nominal Pressing Force: 1,000 kN Ram Stroke, adjustable in steps: 16...140 mm Ram Adjustment: 90 mm Throat Depth: 295 mm Stroke Rate (idle): 70 / min Die Installation Height at Maximum Stroke (stroke down, adjustment up): 420 mm* Table Clamping Surface (W x D): 1,050 x 660 mm Ram Clamping Surface (W x D): 640 x 460 mm Pin Bore in Ram: 65 H7 mm Main Motor Power: 7.5 kW Machine Height approx.: 3,085 mm Machine Weight: 8,500 kg Fsdpedulidofx Ahwofw Equipped with hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, and the latest safety standards (UVV).

Gamybos metai: 1990, būklė: naudotas, Pressure: 75 t Throat depth: 300 mm Stroke: 8 - 110 mm Table size: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Passage opening in table: 250 x 150 mm Ram bore: 40 mm Strokes per minute: 60 + 90 spm Fedpfx Ahod Nl E Uowofw Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram at bottom stroke, ram down: 19 mm Distance table/ram at top stroke, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for attaching tool change consoles - 2 roller rails in table - mechanical overload in ram (shear plate) The following work will be carried out on the machine / partial refurbishment: - Machine will be completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine will be repainted - New Balluff cam switchgear - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication - New control cabinet with touch panel and ABB safety control - Current safety inspection (German UVV) including brake time measurement

Gamybos metai: 1971, būklė: naudotas, Pressure: 160 t Throat depth: 440 mm Stroke: 20 - 120 mm Table surface: 1050 x 750 mm Strokes per minute: 42 and 62 spm Ram surface: 800 x 500 mm Pin bore (depth x diameter): 85 x 50 mm Table through-hole: 355 mm Installation height (stroke down, ram adjustment up): 455 mm Ram adjustment: 100 mm Machine weight approx. 11.2 t *with gear drive *with fixed work table *with enlarged table and ram surface Fsdscyc Adjpfx Ahwjfw *with extended throat depth *with pass-through in the frame *with ram counterbalance The machine is currently being inspected and, for this, the clutch has been disassembled. (Currently, the press is in a dismantled state.)

Būklė: naujas, Press pressure: 40 t Reach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ffedpfxob U Hwmj Ahwow Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Through-hole in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination by Ortlinghaus - Central lubrication by Vogel - Cam controller by Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Būklė: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Stroke rate: 160 strokes/min Ram area: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Pass-through opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Fsdpfxeb U Hwpo Ahwofw Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam switch gear Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Gamybos metai: 1977, būklė: naudotas, Pressure 40 t Outreach - mm Stroke 8 - 90 mm Table dimensions 630 x 430 mm Ram adjustment 60 mm Max. stroke rate 65 strokes/min Total power requirement kW Machine weight approx. 2,480 kg Space requirement approx. m - Gear drive for wheels - Tiltable - Table clamping plate - Mechanical overload protection in the ram (shear plate) Ffedpfx Asb U Hxfehwew - Pneumatic clutch

Būklė: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating energy: 1370 Nm Single stroke energy: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Passage opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Passage opening in table: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch Fjdpfxsb U Hwnj Ahwofw

Būklė: naudotas, Pressure: 55 t Throat depth: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Strokes per minute: 120 spm Ram adjustment: 55 mm Ram area: 290 x 210 mm Ram bore: 40 H7 mm Pass-through opening in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight: approx. 3.4 t Space requirements: approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Vogel central lubrication system Ffjdpfx Aocp Apyshwjw - Balluff cam switchgear - Height-adjustable table - Mechanical ram overload protection (shear plate) - Control cabinet with touchscreen - Foot switch

Būklė: naujas, Pressure: 40 t Outreach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Ffjdpfxjb U Hwto Ahwsw Strokes per minute: 130 spm Ram area: 185 x 180 mm Ram bore: 40 H7 mm Table through-hole: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx. 2.7 t Space requirement approx. 1.4 x 1.1 x 2.1 m - Hydraulic clutch-brake combination - Central lubrication (Vogel) - Cam control system (Balluff) - Control cabinet with touchscreen - Height-adjustable table - Foot switch

Būklė: naudotas, Press capacity: 63 t Outreach: – mm Stroke: 16 – 125 mm Table size: 800 x 600 mm Working capacity: 250 Shearing area: 1600 mm² Table adjustability: 220 mm Fjdpfxoch Umcs Ahwofw Total power requirement: 6 kW Machine weight approx.: 5 t Distance table/ram: 562 mm The machine will be dismantled and partially overhauled – new paintwork – new control cabinet – conversion for safe operation – repair/maintenance

Gamybos metai: 1980, būklė: naudotas, Pressure: 80 t Outreach: – mm Stroke: 50 mm Table surface: 875 x 695 mm Ram surface: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30 – 90 Gap width: 450 mm Machine weight approx. 6.2 t Ffjdpfjdlcy Hjx Ahwjw Space requirement approx. 2.0 x 2.1 x 3.2 m Installation height (stroke down, ram adjustment up): 480 mm Further information: - The machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate free-standing control cabinet with touchscreen, including wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine is safe for manual loading operation at open tools. Before delivery, a current UVV safety inspection and brake time measurement will be carried out.

Būklė: naudotas, Pressure: 200 t Throat depth: — mm Stroke: 250 mm Table size: 2420 x 840 mm Ram area: 1850 x 650 mm Installation height: 500 mm Ram adjustment: 110 mm Ffsdsgk Rfzepfx Ahwow Frame clearance: 1900 mm Table height: 170 mm Strokes per minute: 25 - 45 spm Total power requirement: 22 kW Space requirements: approx. 2550 x 2370 x 3820 mm Weight: 30 t - Pneumatic clutch - Press safety valve, Herion - Cam switchgear, Balluff - Chain break monitoring - Hydraulic overload protection, HYDAC - Motorized ram adjustment with digital display - Free-standing control cabinet with ABB safety controller - Separate two-hand control station with foot switch - Sliding side safety doors - Front safeguarding via light curtains – vertical and horizontal The machine shown and described above is safe for manual loading operations. The machine can also be supplied in a different variant or as an automatic version with feed system. Features and equipment can be configured in consultation with the customer.

Gamybos metai: 1990, būklė: naudotas, Pressure: 80 t Throat depth: 250 mm Stroke: 5/95 mm Table surface: 805 x 510 mm Distance table/ram at bottom stroke: 400 mm Ram bore diameter: 45 mm Ram adjustment: 100 mm Ram surface: 360 x 300 mm Strokes per minute: 55 spm Total power requirement: 5.5 kW Machine weight approx.: 4 t Fedpfx Aefn Aqnjhwjfw Space requirement approx.: 0.83 x 1.7 x 2.6 m - Ram weight balance The machine will be partially overhauled at our facility next year (disassembly, inspection, new paint, new wiring, new control cabinet).

Gamybos metai: 1986, būklė: naudotas, Presskraft 15 t Installationshöhe - mm Hubzahl pro Minute 200 - 2000 Tischfläche - mm Stößelfläche 490 x 200 mm Fedsfn Apxepfx Ahwsfw Blechbreite 5 - 50 mm Hubverstellung 10-30 mm Gewicht 3 t Abmessungen 1370 x 1200 x 2200 mm Antriebsleistung 10 kW Durchgangsöffnung im Tisch 350 x 100 mm Tischbreite 530 / 210 mm Tischlänge 530 / 350 mm Nur 2 Jahre im Einsatz Schnellläufer

Gamybos metai: 1965, būklė: naudotas, Pressure: 150 t Throat depth: 550 mm Stroke: 10 - 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirement: approx. 3 x 1.7 x 3 m Fedpfx Ahecubatowefw - with auxiliary brake - Ram weight compensation - Motorized ram adjustment - Centralized grease lubrication (manual) - Break-out plate - T-slot clamping plate - Safe for manual loading operations - Operating manual available

Būklė: naudotas, Pressure: 160 t Installation height: 600 mm Stroke: 25 - 150 mm Table size: 1500 x 900 mm Ram area: 1500 x 900 mm Ffodpfocgqvpex Ahwsw Ram adjustment: 100 mm Clearance between guides: 1500 mm Passage in side columns: 400 x 200 mm Column spacing: 1680 mm Machine weight approx. 15 t Space requirement approx. 2.7 x 1.8 x 4.4 m 2003 Modernisation / Retrofit The following work is still to be carried out on the machine: - New control cabinet with ABB PLC - Separate two-hand control panel with foot switch - Vogel loss lubrication system

Būklė: naujas, Gamybos metai: 2025, hidraulinio cilindro reguliavimas: 120 mm, pramušama skylė stalo paviršiuje: 220 mm, stalo plotis: 720 mm, stalo ilgis: 1 000 mm, eigos reguliavimas: 125 mm, spaudimo jėga: 150 t, Įranga: apsaugos šviesos užtvara, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY TIME: IMMEDIATE FROM STOCK GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES • Steel construction frame • Stress relief via vibration applied to frame and welded parts • Parallelism and perpendicularity tolerance between tables complies with ISO and DIN standards • Pneumatic clutch and brake combination – OMPI-Italy • Slide guided by 8 linear bearings Fjdpfx Ahjvyrywowefw • Ram equipped with cushioning cylinder • Components such as ram, connecting rod, and slider head made of steel casting, GS52 • High-strength solid crankshaft – 4140 • Connecting rod bushing made of bronze (Zr14) • Rear-mounted flywheel • Equipped with spare bolster plate • Hydraulic overload protection • Motorized table-to-ram adjustment • Automatic central lubrication • Pneumatic pedal with interlock and double-hand control with timer • Electric counter • PLC system with touchscreen interface – DELTA • Electrical switchgear by SIEMENS-SCHNEIDER • CE compliance – OPTIONAL • Finger protection light curtains – SICK, LEUZE • Safety PLC (supervises all electrical systems, valves, double-hand and pedal controls) – PILZ • Double-coil safety valve – GPA, TOPAIR • Locking position switch and cabinet • Safety block • Protective guards in scope of CE compliance TYPE: D-TYPE MONOBLOCK FRAME Capacity: 150 Tons Distance Table to Ram: 500 mm Distance Between Uprights: 1080 mm Ram Adjustment: 120 mm Approx. Press Width: 1400 mm Approx. Press Depth: 1900 mm Approx. Press Height: 3000 mm Bolster Plate Hole Diameter: 220 mm Bolster Size: 720 / 1000 mm Die Clamp Slot Diameter: 55 mm Ram Size: 450 / 800 mm Table Height from Floor: 900 mm Stroke Adjustment: 10 / 125 mm Number of Strokes/Minute: 50 spm Motor Power: 15 + 0.75 kW Motor Speed: 1450 RPM Approximate Weight: 12,000 kg

Būklė: naudotas, Gamybos metai: 1973, mašinos/transporto priemonės numeris: 104530, Throat depth: 350 mm Table size: 690 x 840 mm Table through hole: 160 mm diameter Ram surface: 450 x 600 mm Fedpfjddhw Sjx Ahwsfw Ram adjustment: 80 mm Stroke adjustment: 8 - 100 mm Strokes per minute: 60 Drive motor: 380 V, 5.5 kW Space requirement: 1850 x 1850 x 2650 mm Weight: 6800 kg

Būklė: geras (naudotas), Gamybos metai: 1965, mašinos/transporto priemonės numeris: 951065, - Spaudimo jėga: 22 t - Išsikišimas: 175 mm - Eigos greitis: 120 1/min - Stūmoklio reguliavimas: 50 mm - Stalo aukščio reguliavimas: 50 mm - Eigos reguliavimas: 8-80 mm - Stalas: 520 x 400 mm - Stūmoklis: 250 x 160 mm - Tvirtinimo skląstis su kaiščio fiksacija, D35 mm - Variklio galia: 1,5 kW - Labai tylus veikimas - Mechaninis sukimo sankabos atjungimas per pneumat. cilindrą - Pneumatinis kojinis jungiklis - Be UVV - 4 vnt. mašinos kojos - Maitinimo kabelis su CEE kištuku 16 A - Oro prijungimas su greituoju jungikliu - Svoris: apie 2.000 kg Ffsdped Atnvjfx Ahwjw - Matmenys: plotis 820 x gylis 1100 x aukštis 1800 mm

Gamybos metai: 1972, būklė: naudotas, mašinos/transporto priemonės numeris: 51512/72, Pressing force: 75 t Fsdpfxjb Tdque Ahwefw Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t

Gamybos metai: 1978, būklė: naudotas, mašinos/transporto priemonės numeris: 455 178, Pressing force: 45 t Throat depth: 230 mm Table size: 460 x 690 mm Ffedpodd Irgofx Ahwow Table through-hole: 175 x 220 mm Table adjustment: 160 mm Ram surface: 185 x 360 mm Ram adjustment: 55 mm Stroke adjustment: 4 - 80 mm Strokes per minute: 120 /min Drive motor: 380 V, 3 kW Space requirement: 1800 x 1100 x 2100 mm Weight: 2800 kg

Būklė: naujas, Gamybos metai: 2025, stalo plotis: 1 200 mm, stalo ilgis: 2 200 mm, spaudimo jėga: 600 t, garantijos trukmė: 24 mėnesiai, eigos ilgis: 200 mm, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and forming by die. H-type (straight-side) eccentric presses provide high stability and process safety in applications requiring large tables and heavy dies, thanks to their rigid frame construction. The CRONOSSTECH CEHP 600 – H-Type Eccentric Press 600 Ton is designed for stable operation in high-volume production, focusing on die protection and operator safety. With its monoblock frame, eight-guided ram, hydraulic overload safety device, and automatic lubrication infrastructure, it offers reliable performance suitable for continuous production environments. Key advantages - Stable operation with large dies thanks to a 2200×1200 mm table size - Die and equipment protection with hydraulic overload safety - Precision guidance with 8-way guided ram and balancer piston - Controlled and user-friendly operation with PLC + touchscreen - High operator safety with light curtain protection Application areas - Punching/cutting/forming applications requiring large tables - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-way guided ram • Adjustable stroke with single connecting rod • Ram with balancer piston • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reversing motor • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain safety barrier • Enclosed oil reservoir with gear assembly • Dual-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap discharge systems • Sliding safety cover for front of the table • Die manufactured to required specifications Ffodpfx Aox N R A Ushwjw ✅ TECHNICAL SPECIFICATIONS (CEHP 600) Capacity: 600 Ton Table–Ram Distance: 500 mm Housing Width (Between Columns): 2350 mm Ram Adjustment: 120 mm Press Width: 3100 mm Press Depth: 3500 mm Press Height: 5200 mm Table Dimension: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 90 kW Weight: 77,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, pramušama skylė stalo paviršiuje: 140 mm, stalo plotis: 590 mm, stalo ilgis: 800 mm, eigos reguliavimas: 100 mm, spaudimo jėga: 60 t, cilindro skersmuo: 40 mm, galia: 5,5 kW (7,48 AG), perforavimo jėga: 60 t, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press driven by force generated through an eccentric mechanism, designed for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 60 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready usage with PLC control and dual-hand/foot pedal operation Areas of use: - Cold cutting and punching operations - Cold blanking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-way slide guide • Spheroidal cast connecting rod and gear bearings • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Central system fully automatic grease lubrication • Pneumatic clutch and brake combination • Complies with CE safety directives • Double-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual-hand/foot pedal control system • Mechanical safety lock system • Emergency reverse motor function • Complies with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies to customer specifications Ffjdpfovtx D Njx Ahwsw • 8-guide slideway ✅ TECHNICAL SPECIFICATIONS (60 TON) Capacity: 60 Ton Throat depth: 260 mm Distance table–ram: 360 mm Slide–table distance: 395 mm Distance between side frames: 380 mm Ram adjustment (stroke adjustment): 70 mm Approx. press width: 1340 mm Approx. press depth: 1450 mm Approx. press height: 2200 mm Front anchor dimension: 630 mm Side anchor dimension: 875 mm Table hole diameter: Ø150 mm Table size: 520×720 mm Die mounting slot diameter: Ø40 mm Ram size: 340×220 mm Floor-to-table height: 730 mm Stroke adjustment: 0–95 mm Strokes per minute: 50 spm Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2750 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, pramušama skylė stalo paviršiuje: 140 mm, stalo plotis: 440 mm, stalo ilgis: 700 mm, eigos reguliavimas: 80 mm, spaudimo jėga: 40 t, cilindro skersmuo: 35 mm, galia: 4 kW (5,44 AG), perforavimo jėga: 40 t, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Eccentric Press; is a type of mechanical press driven by a force generated through an eccentric mechanism, utilized in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 40 Ton is designed for stable operation in cold forming applications. Its rigid steel construction body, pneumatic clutch–brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production. Fedpjvtx Axsfx Ahwefw Key Advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Ready-to-use operation with PLC control + dual hand/foot control Applications: - Cold shearing and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided guided slide • Spheroidal casting connecting rod and gear bearings • Crankshaft and drive shafts made of 4140 alloy steel • Fully automatic central grease lubrication system • Pneumatic clutch and brake combination • CE-compliant to safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock system • Emergency reverse motor operation • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Vibration damping pads • Touch LCD screen (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare table • Decoiler, feeder, and straightener • One set of tooling per requested specifications • 8-slide guideways ✅ TECHNICAL SPECIFICATIONS (40 TON) Capacity: 40 Ton Throat depth: 220 mm Table–ram distance: 340 mm Distance between frame sides: 330 mm Ram adjustment (stroke regulation): 60 mm Approx. press width: 1050 mm Approx. press depth: 1280 mm Approx. press height: 2100 mm Front anchoring dimension: 575 mm Side anchoring dimension: 740 mm Table hole diameter: Ø150 mm Table size: 440×630 mm Die mounting hole diameter: Ø40 mm Ram size: 290×180 mm Table height from floor: 720 mm Stroke adjustment: 10-70 mm Strokes per minute: 55 spm Motor power: 4 kW Motor speed: 1450 rpm Approximate weight: 2100 kg Note: If you require changes to the technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.