Biesse Rover B pirkti naudotą (10)

Sąlyga: naudotas, Gamybos metai: 2005, 2005 BIESSE ROVER B 4.40 FT 3 ašių CNC apdirbimo centras Techninės specifikacijos paskutinėje nuotraukoje Darbo valandos (įjungtas): 45.343 Nodpfowmdynsx Aghswp Darbo valandos automatiniame režime: 27.267

Sąlyga: naujas, Gamybos metai: 2022, Travel distances (X,Y,Z): 6735 x 1930 x 245 mm Number of vertical drilling head spindles: 0 pcs Number of horizontal drilling head spindles: 0 pcs Number of tool positions: 39 pcs Extraction nozzle diameter: 2x 250 mm Number of milling units: 2 pcs Year of manufacture: 2022 Speed: 18,000 / 24,000 rpm Compressed air connection: 7 bar Motor power: 16.5 / 19.2 kW Pump capacity: 250 m³/h Control: BH660 CNC Machining Center BIESSE Rover B 1967 – BRAND NEW MACHINE / STOCK MACHINE, factory sealed! Working area: X = 6735 mm Y = 1930 mm Z = 245 mm with modules H=74 mm Njdpfx Agjxf Dwzshewp Z = 290 mm with modules H=29 mm (milling operation) Workpiece clearance in Y: 1930 mm for thickness up to 60 mm on modules H = 74 mm; 1880 mm for thickness over 60 mm on modules H = 74 mm. Double Y-axis for 5-axis and 4-axis spindles (enabling tool changes during non-productive time) Safety system with bumper and light barriers – 3-sided safety fence UPS 10 cross beams – 30 base carriages Multiple clamping positions automatic table positioning FPS HyperClamp clamping system 3 stop rows 8 loading aids 250 m³/h vacuum pump Chip conveyor 5-axis spindle with 16.5 kW – 18,000 rpm Deflector preparation Aggregate interface 4-axis spindle with 19.2 kW peak power – 24,000 rpm C-axis Separate Y-axis for 5-axis and 4-axis No drilling head! Revolving tool changer traveling with 4-axis spindle with 8 positions Front revolving tool changer for 5-axis spindle with 8 positions Front pickup for saw for 5-axis Rear chain changer with 22 positions (Image for illustration purposes only!) FACTORY SEALED, BRAND NEW MACHINE! New machine warranty! Installation, training, service: By official BIESSE dealer in Austria! HANDL Maschinen GesmbH & Co KG Trauseneggerdamm 5 4600 Wels

Sąlyga: naudotas, Gamybos metai: 2006, Numerical control XP 600 X-axis working area: 3060 mm Y-axis working area: 1140 mm Z-axis working area: 160 mm Number of working zones: 2 Bar worktable 6 adjustable support bars for suction cup positioning Number of pneumatic bakelite rods for panel lifting (?): 2 2 adjustable suction cups per bar with vacuum seal to secure the panel during machining 1 vertical electrospindle with C-axis, 12 kW motor Tool change system with 10 positions – located at the drill head, cone type ISO 30 BH19L boring head with 18 spindles arranged as follows: - 7 vertical on the X-axis - 6 vertical on the Y-axis - 4 horizontal on the X-axis - 2 horizontal on the Y-axis - 1 independent saw unit for grooving along the X-axis Front photocell protection and safety system Automatic lubrication system (?) Climate system for cooling and cleaning the machine control unit Vacuum pump: 250 m³/h Nsdsv Aacfspfx Aghswp TECHNICAL DETAILS TO BE VERIFIED

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, Working table dimensions: 5000×1600 mm 8 bars with 4 carriages each, with automatic positioning Nr. 2 ES959 electrospindles – HSK F63, air-cooled, 13.2 kW RPM: 24,000 Electrospindle stroke: 410 mm Boring head: BHZ111F with: 12+4 vertical 60 mm; 6 horizontal 75 mm; 1 lateral 60 mm; Ø10; 1.7 kW Automatic lubrication Boring unit stroke: 371 mm Tool magazine on carriage side: 22 positions Magazine on carriage side: 4 positions Magazine on outer side: 2 positions Aggregates: Aggre109 (BRUSH); Aggre44 (SAW BLADE 215); GROTEFELD (L_GROT, S_GROT) Nedpfx Agjwr Tivehewp Devices: nr. 2 x Agg117 (edge reference, edge scraper, glue scraper); Aggre99 (edge reference) Tools: Edge trimmer RH/LH Vacuum pumps: nr. 1 Becker brand, oil-bath vane Axis lubrication: Automatic

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008013, Darbinė eiga X ašis: 5780 mm Darbinė eiga Y ašis: 1650 mm Darbinis paviršius: Su vakuuminėmis konsolėmis Nwjdpowuz Eksfx Aghsp Pagrindinio špindelio galia: 13,2 kW Valdomų ašių skaičius: 4 ašys Maksimalus briaunos aukštis: 60 mm Gręžimo špindelių skaičius: 16 Įrankių vietų skaičius: 16

Sąlyga: naudotas, Gamybos metai: 2013, Machining centre with automatic robot for loading and unloading panels Numerical control: Biesse XP600 with graphical interface software Biesse Works ADVANCE – machine and office version WRT Technology (Windows Real Time): The machine control logic is processed directly on the PC, not on a dedicated special device. Working range in X-axis: 6200 mm Working range in Y-axis: 1552 mm Working range in Z-axis: 180 mm Z-axis travel: 235 mm No. of working fields in X-axis: 2 Bar worktable / console No. 10 EPS electronically adjustable bars for vacuum pad holders 8 pneumatic Bakelite bars for panel lifting – loading and unloading assistance No. 4 electronically adjustable EPS vacuum cups per bar with vacuum seal for panel clamping during machining Nedekvrxuopfx Aghjwp No. 1 vertical electrospindle with automatic tool change, 12 kW motor – 12,000 rpm, flange for aggregates, prepared for C-axis vector Automatic tool changer with 12 positions, mounted on the machine head BH35L boring head with the following spindle configuration: - No. 14 vertical spindles in X-axis - No. 10 vertical spindles in Y-axis - No. 6 horizontal spindles in X-axis - No. 4 horizontal spindles in Y-axis Independent saw blade for grooving in X-axis – diameter: 120 mm Front safety mat and safety system Perimeter safety fence Automatic lubrication system Machine-controlled cooling and cleaning system with conditioner Vacuum pump: 250 m³/h Kuka industrial robot with 6 articulated axes with point-to-point positioning Independent control panel Panel alignment table Barcode reader on robot arm Panel handling system including: * 1 motorized roller conveyor for preloading panel stacks * 1 translational motorized roller conveyor * 1 motorized roller conveyor for unloading panel stacks Technical data: * Type: KR210-2 * Number of axes: 6 * Permissible nominal load: 210 kg * Machine weight: 1267 kg * Noise level: 75 dB * Installed power: 25.8 kW * Panel dimensions – min./max. length: 300/3000 mm * Panel dimensions – min./max. width: 180/1500 mm * Panel dimensions – min./max. thickness: 8/60 mm * Max. panel weight: 90 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, X-axis working area: 6,400 mm Y-axis working area: 1,500 mm Z-axis working area: 1,500 mm Number of milling spindles: 1 Main motor power: 13 kW Maximum spindle speed: 24,000 rpm Tool holder system: HSK-F63 Tool change positions: 8 Vertical drilling heads: 20 Horizontal drilling units X-axis: 4 Horizontal drilling units Y-axis: 4 No. 2 vacuum pumps, 360 m³/h each Nesting Remote control Nodpfx Ajwlcqvoghjwp BIESSE WORKS software Overall dimensions: 11,004×5,334 mm Weight: 4,900 kg

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008134, Darbinė eiga X ašis: 5780 mm Darbinė eiga Y ašis: 1930 mm Darbinis paviršius: su vakuuminėmis konsolėmis Nsdpfx Agow Idgiohowp Pagrindinio veleno galia: 13 kW Valdomų ašių skaičius: 4 ašys Gręžimo velenų skaičius: 32 Įrankių vietų skaičius: 28

Sąlyga: naudotas, Gamybos metai: 2017, Numerical control with B-Solid software X-axis working range: 3600 mm Y-axis working range: 1800 mm Number of working zones: 2 Stackable worktable Automatic loading system with side lift table Label printing system with automatic application on the loading table Panel separation system with suction cups No. 1 3-axis vertical electrospindle, 13.2 kW, with automatic tool changer, ISO 30 taper Njdeqvt D Ropfx Aghswp Automatic tool changer with 16 positions – located at the rear of the machine Automatic tool changer with 8 positions – at the machine Drilling head BH 10 with 10 spindles in the following arrangement: - No. 15 verticals on the X-axis - No. 17 verticals on the Y-axis Automatic unloading system with motorized belt Workpiece cleaning system Protective and safety system with perimeter fencing Safety system with bumper Automatic lubrication system Air conditioning for cooling and cleaning the machine control unit 250 m³/h vacuum pumps

Sąlyga: naudotas, Gamybos metai: 2019, Numerical control with bSolid software The multi-document software application in a Windows environment enables the design of the finished product, the definition of its processes, work planning, simulation of machining operations on the machine’s 3D model, and generation of the required machine programs. bSolid - 3-axis machining bSolid - 5-axis machining module for surface processing using 5-axis units and interpolated movements on all 5 available axes (X, Y, Z, C, B). The module includes the following commands: • Surface assignment for three-dimensional roughing and finishing operations • Spreading or projecting a path onto a curved surface • Machining on a single plane • Following 2D or 3D curves with any type of tool bSolid - 3D engraving bSolid - Importing external formats Working areas: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable part in Y: * 1650 mm, with a thickness of up to 60 mm on modules with a height of 74 mm * 1600 mm, with a thickness over 60 mm on modules with a height of 74 mm. 10 ATS levels – 40 carts. Scope of supply includes: • 2 aluminium rails (No. 1 left and No. 1 right) on which the lateral stops slide. • 10 aluminium support tables. The tables glide on hardened and ground linear guides with ball bearing guides. Locking is provided on both linear guides, front and rear, by four pneumatic cylinders. Control is via a button in front of the working area. The carriages glide on steel guides located above the extrusion. Pneumatic locking system, divided into 2 locking zones in X Njdpfxew D E A Ej Aghowp Automatic positioning (EPS) for support tables. "EPS" (Electronic Positioning System): Device for automatic positioning of the working surfaces and carts via NC, complete with locking devices to eliminate possible operating errors. Rear row stops, with 140 mm stroke Intermediate row stops, positioned at 405 mm, with 140 mm stroke. Front row stops, positioned at 1460 mm, with 140 mm stroke 4 lateral stops with 140 mm stroke (2 right + 2 left), with system 2 additional lateral stops with 140 mm stroke (1 right + 1 left). Sensor to check whether the stops are lowered 12 clamping devices for holding narrow workpieces 6 loading aid bar lifts for H=74 mm modules 5A configuration, for Rover B. Configuration for high productivity and flexibility thanks to the two operating units (4 and 5 axes) and the option of simultaneous tool changes. Includes the axes and carriages for the movement of the main operating units. Comes with 2 inverters. Second Y-axis. Enables separation of the front and rear Y carriages with independent drives. The two Y carriages achieve a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electric spindle, HSK F63 interface, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 operation. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 operation. • Ceramic bearings. • Right and left-hand rotation. • Speed programmable from 1,000–24,000 rpm via NC. • Pneumatic release operated over a prismatic linear guide with ball bearings. A cover is included for chip extraction, with 6 selectable positions.