Vienos kolonos ekscentrinis presas

Maskinexport nicht bekannt

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1970, LZ lathe manufacturer: KERN, Type: DS 20 AL, Year approx. 1970 Equipped with 3-jaw chuck Forkardt 250mm, quick-change tool post Multifix size C with holders, coolant system. Swing over bed: 500mm Swing over cross slide: 250mm Centre distance: 1000mm Spindle speeds: 12 - 1200 rpm Fsdpfx Aegqxcijdmjgk Machine is powered and can be demonstrated under power. Good guideways.

Gamybos metai: 1990, Sąlyga: naudotas, Pressure: 75 t Throat depth: 300 mm Stroke: 8 - 110 mm Fedpfxjd Nl E Us Admegk Table size: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Passage opening in table: 250 x 150 mm Ram bore: 40 mm Strokes per minute: 60 + 90 spm Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram at bottom stroke, ram down: 19 mm Distance table/ram at top stroke, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for attaching tool change consoles - 2 roller rails in table - mechanical overload in ram (shear plate) The following work will be carried out on the machine / partial refurbishment: - Machine will be completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine will be repainted - New Balluff cam switchgear - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication - New control cabinet with touch panel and ABB safety control - Current safety inspection (German UVV) including brake time measurement

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2008, mašinos/transporto priemonės numeris: 08063406 3441, apatinio volelio skersmuo: 265 mm, viršutinio volo skersmuo: 285 mm, vėjo ilgis: 3 100 mm, plieno lakšto storis (maks.): 15 mm, bendras svoris: 8 000 kg, bendras ilgis: 5 300 mm, bendras plotis: 1 200 mm, bendras aukštis: 1 700 mm, galia: 14,71 kW (20,00 AG), įvesties srovės tipas: trifazis, Įranga: avarinis stabdymas, Biegepresse (Walzenbiegemaschine) von Privat zu verkaufen. Walzkapazität 5xD = 15 Vorbiegekapazität 5xD = 12 Vorbiegekapazität 1,3xD = 9 Fedpfsvl H Rbjx Admogk

Gamybos metai: 1965, Sąlyga: naudotas, Pressure: 150 t Throat depth: 550 mm Stroke: 10 - 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirement: approx. 3 x 1.7 x 3 m - with auxiliary brake - Ram weight compensation - Motorized ram adjustment - Centralized grease lubrication (manual) Fjdscubatopfx Admegk - Break-out plate - T-slot clamping plate - Safe for manual loading operations - Operating manual available

Sąlyga: naudotas, Gamybos metai: 1995, tekinimo skersmuo virš slankiojančio stalo: 500 mm, Universal Lathe Make: ZMM Type: 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Distance between centers: 1000 mm Fgedpfx Adewudhusmsk Swing diameter over bed: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolholder • Live center • Coolant pump • Machine lamp All information subject to change. A powered demonstration is possible at any time in our showroom.

Sąlyga: naudotas, Gamybos metai: 1970, mašinos/transporto priemonės numeris: 120895, Pressure: 63 t Throat depth: 250 mm Fgodpfefx Hv Hsx Admsk Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Passage opening in table: 240 mm Passage opening in clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable design via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or underneath (360 x 160 mm), centralized lubrication via hand pump, additional clamping plate (700 x 480 x 850 mm), two-hand operation, foot release configurable, mode selector switch for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Sąlyga: naudotas, Gamybos metai: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Fgodpfx Aeu Nc Emsdmek Distance between columns: 2,500 mm Distance spindle/table (vertical): 1,230 mm Clamping surface (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork design, integrated A-axis = swivel angle +/- 110° Tool changer: Manufacturer Hamül, rotary table type with turntable, for 32 tool positions Chip conveyors: 2 hinge belt conveyors, manufacturer DGS, with water tank, insertion length 8,500 mm Make BKW, type DL 55V-2KK, capacity 2.41 l/min; Combined oil-water cooling unit for hydraulic oil and spindle cooling Coolant system: Band filter, manufacturer DGS, type SBF 150 Operation: via control console, type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Handheld control unit: HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective panels with viewing windows and safety doors) Hydraulic unit Work area lighting

Gamybos metai: 1981, Sąlyga: paruoštas naudoti (naudotas), Working width: 2500 mm, max. sheet thickness: 20 mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine designed for interchangeable top rolls up to min. Ø 450 mm, machine overhaul in 2009, factory inspection in 2012. Fsdpfenvfdbsx Admegk

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1980, Pressing force: 300 t Table size: 1,200 x 850 mm Throat depth: 400 mm Ram width: 1,100 mm Table opening: 400 x 250 mm Installation height: 500 mm Stroke rate: 32 strokes/min Stroke: 30 - 140 mm Ram adjustment: 105 mm Weight: approx. 19,500 kg Other features: - Approved for manual loading operations - Equipped with Herion safety valve Xsz 20 Fodpfx Adsd A Hbcsmogk - Motor-driven central grease lubrication - Pneumatic ram weight balancing cylinder - Motorized ram adjustment - T-slots in the ram - Free-standing control panel - Connecting rod bearing overhauled

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1989, viršutinio volo skersmuo: 200 mm, šoninio volelio skersmuo: 150 mm, maks. lakšto storis: 6 mm, darbinis ilgis: 3 000 mm, Working length 3000 mm Bending capacity 6 mm Pre-bending capacity 4 mm Top roller diameter 200 mm Side roller diameter 150 mm Fgodpfx Adouzm Aysmjk Hydraulic drop-end