Metalo pjūklai pirkti naudotą (1 649)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
Mažas skelbimas
Estija
388 km
Metalo juostinis pjūklas
BOMARIndividual 520.360 GANC
Skambinti
Gamybos metai: 2019, Sąlyga: paruoštas naudoti (naudotas), Bendra informacija
Išmatavimai plotis: 2650 mm
Išmatavimai gylis: 3350 mm
Išmatavimai aukštis: 2160 mm
Staklių svoris: 1800 kg
Šios BOMAR Individual 520.360 GANC buvo pagamintos 2019 m. Įrenginys pasižymi automatiniu darbo režimu su kampinio pjovimo diapazonu nuo 0° iki 60°. Pjūklelio juosta veikia 20–120 m/min greičiu ir priima maksimalų 2 500 kg ruošinio svorį. Idealiai tinka tiems, kurie siekia padidinti savo metalo pjovimo galimybes. Dėl detalesnės informacijos apie šią staklę susisiekite su mumis.
Taikymo tipai
Gusdpex D Iwpjfx Abmok
Pjovimas
Mažas skelbimas
Grońsko
593 km
Automatinis juostinis pjūklas
AmadaHA 400 W
Skambinti
Sąlyga: naudotas, Parduodu nuotraukose matomą juostinį pjūklą, kurį pagamino Taivano įmonė Amada, modelis HA 400 W, 2001 metų.
Įrenginys atvežtas iš Vokietijos.
Veikia tiek automatinėje, tiek rankinėje darbo rėžimuose.
Galimas įkrovimas vietoje.
Techninės specifikacijos:
Maksimalus pjovimo diametras: 400 mm
Pateikiklio ilgis: 600 mm
Juostos dydis: 4570 x 32 x 1,06 mm
Gujdpsxfwmpofx Abmek
Pjovimo greičio diapazonas: 15 - 90 m/min
Variklio galia: 5,5 kW
Gamybos metai: 2001
Svoris: 2000 kg
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKHBS320
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, CORMAK HBS320 – Double-sided Miter Bandsaw for Angles from -45° to +60°
The design of this machine is based on solutions and projects developed by Polish engineers. Its precision and manufacturing quality place it at the forefront of bandsaws capable of cutting widths up to 320 mm. A key advantage is the latest generation hydraulic cylinder. The machine features a reinforced vise base and a quick-release vise.
Machine Features
The CORMAK HBS320 metal bandsaw allows angle cutting in the range from -45° to +60°. The workpiece can be fed manually or using an automatic feeder. Downfeed during cutting is gravity-based, utilizing oil flow control in the hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. Upon completion of the cycle, the machine automatically stops and the operator raises the arm to the starting position.
The saw arm is made from a robust, single-piece grey cast iron casting. Combined with a 27 mm wide saw blade, it enables high-volume cutting of structural, stainless, and tool steels. The vise is mounted on an adjustable bed and fitted with a quick-release clamping system. The blade guides feature rolling bearings and carbide inserts, ensuring excellent cutting precision and straightness. This significantly improves blade guidance, longevity, accuracy, and cut quality, while the carbide guides greatly reduce wear on both the machine and the blade.
The base is constructed as a rigid, welded steel body housing a separate coolant tank with an electric pump. The upper part of the base forms a tray for coolant drainage and chip collection during the cutting process. The base supports a cast iron worktable with a double-swivel arm and a control panel.
Feed rate is regulated from the bandsaw’s control panel. Two blade speeds are available: 44 and 88 m/min. When the arm reaches its lower position after the cut, the blade drive is switched off automatically. Safety is ensured by blade guards and micro-switches that stop the motor when the cutting cycle ends or any guard is opened. Additional protection is provided by automatic shut-off in case the blade breaks.
Technical Specifications
Ø MAX – 260 mm (perpendicular cut)
H x W MAX – 320 x 160 mm (perpendicular cut)
POWER SUPPLY – 3-phase 400V
TOTAL POWER – 2.1 kW
ARM DOWNFEED CONTROL – hydraulic cylinder
BLADE DIMENSIONS – 2740 x 27 x 0.9 mm
CUTTING SPEED – infinitely adjustable 0–50 m/min
BLADE SPEED – 44 / 88 m/min
VISE BASE HEIGHT – 920 mm
DIMENSIONS – 1400 x 880 x 1550 mm
WEIGHT – 330 kg
Cutting Capacity
Angle
0º —— ø260 320 x 160 255 x 255
45º R ø210 210 x 200 210 x 210
60º R ø135 135 x 130 130 x 130
45º L ø160 220 x 130 160 x 160
Gedji D Dgwepfx Abmouk
The price quoted is NET (excluding VAT). Transport costs are not included.
For more information, please contact us by phone or email. We invite you to view our full offer on our website.
Mažas skelbimas
Mielec
568 km
Juostinis pjūklas
BEHRINGERHBP303A
Skambinti
Sąlyga: naudotas, Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SN 497269, Behringer HBP303A
SN 497269
Guedpsx Hg I Iefx Abmjk
Mažas skelbimas
Wymysłów
504 km
Metalo pjūklas ir elektrinis pjūklas
Bügelsäge
Skambinti
Sąlyga: labai geros būklės (naudotas), For sale: heavy-duty band saw for cutting metal, in very good condition.
Godpju Udriofx Abmsuk
Atraskite daugiau naudotų mašinų
Mažas skelbimas
Lietuva
0 km
Juostinis pjūklas
BEHRINGERDynamic
Skambinti
Sąlyga: naujas, Gamybos metai: 2023, ! Machine offer for customers in Lithuania / Latvia / Estonia.
The new high-performance automatic bandsawing machines of the HBE Dynamic series, provide performance, ease of use and energy efficiency. You can rely on accurate and fast cuts in easy to difficult to cut materials, in solids, tubes and profiles. The rigid, low-vibration saw frame in cast iron construction and the linear guide system in portal design ensure the best cutting results and maximum blade service life.
Godeiy Rc Rjpfx Abmouk
By the standard servo-downfeed system with BEHRINGER cutting pressure control, the HBE Dynamic series provides short idle times and a precise saw feed movement. The standard cutting pressure control prevents overloading of the saw blade and increases the lifetime significantly. It therefore offers the best conditions for a dynamic, tool gentle sawing.
Available models:
- HBE261A
- HBE321A
- HBE411A
- HBE511A
Mažas skelbimas
Lenkija
478 km
Metalo juostinis pjūklas
MEBAMEBAmat 434
Skambinti
Gamybos metai: 2019, veikimo valandos: 1 650 h, Sąlyga: paruoštas naudoti (naudotas), Papildoma įranga
Guodox D Irtepfx Abmek
Purškimo įrenginio talpa: apie 12 litrų / Hidraulinės alyvos talpa: apie 5 litrus / Aušinimo skysčio talpa: apie 180 litrų
Ši MEBA MEBAmat 434 metalo juostinė pjovimo staklė pagaminta 2019 metais. Ji pasižymi 7,5 kW juostinės pavaros galia ir pjovimo greičiu iki 150 m/min. Staklės gali apdoroti apvalią medžiagą iki Ø434 mm ir kvadratinę medžiagą iki 434 × 434 mm. Sveria apie 4000 kg, su hidrauline užspaudimo sistema užtikrina patikimą darbą. Jei ieškote aukštos kokybės pjovimo galimybių, apsvarstykite mūsų siūlomą MEBA MEBAmat 434 staklę. Susisiekite dėl daugiau informacijos.
Pritaikymo sritys
Pjovimas
Mažas skelbimas
Vokietija
6 514 km
Diskinis pjūklas
BEHRINGER-EISELEPSU 450 H
Skambinti
Gamybos metai: 2004, Sąlyga: naudotas, Technical details:
Saw blade diameter: 450 mm
Cutting diameter: 150 mm
Saw blade bore: 50 mm
Saw blade diameter: 400 - 450 mm
Saw blade speeds: 6 / 12 / 24 / 45 rpm
Cutting range at 90 degrees, square: 140 x 140 mm
Cutting range at 90 degrees, round: 150 mm
Cutting range at 90 degrees, flat: 400 x 30 / 345 x 70 / 300 x 95 mm
Table size: Ø 700 mm
Rotating table: 360 degrees
Clamping pressure: 30 bar
Gsdpfxou Nit Rj Abmouk
Electrical configuration - Voltage/Frequency: 400 / 50 V/Hz
Total power requirement: 3.6 kW
Machine weight approx.: 1600 kg
Machine dimensions: 1.5 x 1.0 x 2.35 m
CIRCULAR SAW SEMI-AUTOMATIC – PROFILE CIRCULAR SAW MACHINE – UNDERFLOOR SAW
For cutting materials: solid steel, tubes, and profiles within the specified cutting range.
Cutting speed depends on the material/workpiece being cut.
Circular saw with hydraulic material clamping (clamping pressure adjustable)
Mitre cutting +30° to -90°
Equipped with electro-hydraulic control
Hydraulic pump: 2.2 kW; 23 l/min.
Coolant system integrated in machine base
Piece counter
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKHBS275
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, CORMAK HBS275 Band Saw for cutting pipes, profiles, and rods is widely used in all locksmith workshops where precision, quality, and cutting speed are paramount. The model is equipped with a swiveling arm adjustable from 0-60°, with saw guides based on carbide inserts. The robust frame design ensures precise and quiet operation.
Machine Features
The horizontal metal band saw with a swiveling arm allows cutting perpendicular to the axis of the material as well as at any angle between 0 and 60°. The material can be fed manually or with any mechanical device, while the tool feed is fully automatic. The blade guides are fitted with special carbide plates and bearings, significantly enhancing blade guidance, lifespan, straightness, and the quality of the cut. Carbide guidance greatly reduces both machine and blade wear. The machine is equipped with a high-efficiency coolant pump in a closed-loop system.
The saw arm, made of a single cast-iron piece, combined with a 27 mm wide saw blade, allows for repeated series cutting of both profiles and solid materials. The vise is mounted on an adjustable bed and features quick clamping. Blade guides fitted with hard metal (carbide) plates and a rolling bearing system ensure cutting precision and straightness—carbide-guided blade supports are crucial for quality results.
The arm is equipped with an automatic blade tension sensor and is tilted at 25 degrees to prolong blade life. A cleaning brush, mounted underneath the arm, ensures blade cleanliness and effective operation. Power is transmitted through a worm gear drive.
A cast-iron work table with a swiveling arm and a separate control panel is attached to the base. During cutting, the main movement is the saw blade’s feed, and the arm’s descent serves as the feed direction. The descent (cutting) speed is regulated by a hydraulic cylinder.
Feed speed is controlled from the saw’s control panel. The operator can select one of two blade speeds: 37.5 or 75 m/min. In the lower arm position (after finishing the cut), the blade drive shuts off automatically. Safety is ensured by blade guards and micro-switches stopping the motor once the cutting cycle ends or if any guard is opened. Additional protection cuts off the machine automatically if the blade breaks.
The drive is transmitted via a worm gear motor.
The motor has a thermal fuse, protecting it from overheating during operation.
Technical Data
TOTAL POWER: 1.5 kW
POWER SUPPLY: 400V 50Hz
ARM DESCENT CONTROL: hydraulic cylinder
Gjdpjudi Unefx Abmouk
BLADE DIMENSIONS: 2450 x 27 x 0.9 mm
BLADE SPEED: 37.5 / 75 m/min
VISE BASE HEIGHT: 900 mm
MACHINE DIMENSIONS (WITH RAISED ARM) (L x W x H): 1720 x 800 x 1800 mm
WEIGHT: 215 kg
CUTTING CAPACITY
Angle | Round | Flat | Square
---|---|---|---
0° | ø220 | 260 x 140 | 200 x 200
45° R | ø160 | 160 x 140 | 160 x 160
60° R | ø100 | 120 x 100 | 100 x 100
Price does not apply to machines purchased in Poland.
Mažas skelbimas
Austrija
945 km
Ritininiai konvejeriai / stabdymo sistemos
HESSEHESSE Exakt B/KF Standard 3.00
Skambinti
Sąlyga: naujas, Būklė: nauja
Pristatymo laikas: apie 8 savaites nuo užsakymo
Kilmės šalis: Vokietija
Kaina: 3050 €
Ilgis: 3000 mm
Darbinis aukštis: 820–940 mm
Maks. apkrova metrui: 300 kg/m
Volelio plotis: 350 mm
Volelio skersmuo: 63 x 3 mm
Ašies skersmuo: 15 mm
Maks. matavimo ilgis: 2600 mm
Volelių žingsnis: 250 mm
Su mm skalė ir nuskaitymo lupa ant ribotuvo vežimėlio
Volelių ir matavimo takas su rankiniu matavimo sistema bei tvirta preciziška plokščio plieno kreipiančiąja
Ribotuvo vežimėlis su 6 guoliais, rankiniu būdu stumdomas ir fiksuojamas
Medžiagos stabdiklis atverčiamas
KITI ILGIAI:
2 metrai
€ 2.523,-
4 metrai
€ 3.905,-
PASIRINKTYS:
Medžiagos stabdiklio svirtis su spyruokle, reguliuojama iki nulio taško, rankiniu būdu atlenkiama atgal
SZ 05
€ 515,-
Dengiamoji skarda tarp atraminių volelių, galvanizuota, už bėginį metrą
SZ 06
€ 119,-
Gedpfewirnlox Abmsuk
KITŲ ILGIŲ IR VOLELIŲ PLOČIŲ KLAUSKITE.
(Nuotrauka pavyzdinė)
Mažas skelbimas
Kaunas
30 km
Pjūklo pjūklas ir elektrinis pjūklas
KASTOflexF
Skambinti
Sąlyga: naudotas, Gamybos metai: 2009, Diskinis pjūklas KASTOflex F geros būklės, pridedama dokumentacija. Galima išbandyti Kaune.
Specifikacija
Modelis: Kastoflex F
Metai: 2009
Svoris: 2700 kg
Galia: 13 kW
Matmenys: ilgis 4800 x Aukštis 2225 x plotis 2580
Automatinis padavimas, numetimas
Nuopjovų konvejeris
Kampų pjovimas
Prispaudimas
CNC kontroleris
Pjovimas kampu 90 (round, square, flat) 150 / 140 x 140 / 200 x 100 mm
Pjovimas kampu 45 (round, square, flat) 145 / 120 x 120 / 160 x 80 mm
Pjovimas kampu 60 (round, square, flat) 115 / 100 x 100 / 120 x 60
Disko diametras (Ø 350 mm opt.) Ø 400 to 450 mm
Guedewfd Icepfx Abmsk
Jei turėsite daugiau klausimų, mielai atsakysime.
Mažas skelbimas
Lenkija
478 km
Diskinis metalo pjūklas
SCHÜCOPDG SET
Skambinti
Gamybos metai: 2008, Sąlyga: paruoštas naudoti (naudotas), Bendrieji duomenys
Mašinos svoris: 1800 kg
Šis SCHÜCO PDG komplektas pagamintas 2008 m. Tvirta apvali metalo pjovimo staklė su 2800 sūkių/min. variklio greičiu ir 500 mm disko skersmeniu. Mašinos svoris 1800 kg, ji visiškai veikianti ir reguliariai prižiūrėta. Galima apžiūra vietoje įjungus. Susisiekite dėl detalesnės informacijos apie šią mašiną.
Godex D H Tijpfx Abmjuk
Pritaikymo sritys
Pjovimas
Mažas skelbimas
Vokietija
6 514 km
Diskinis pjūklas
BEHRINGER-EISELEPSU 450 H
Skambinti
Gamybos metai: 2007, Sąlyga: naudotas, Technical details:
Saw blade diameter: Ø 400 - 450 mm
Saw blade bore: Ø 50 mm
Spindle speeds: 6 / 12 / 24 / 48 (2-step) rpm
Motor speeds: 1400 / 2800 rpm
Cutting capacity at 90 degrees, round: Ø 150 mm
Cutting capacity at 90 degrees, square: 140 x 140 mm
Cutting capacity at 90 degrees, flat: 400x30 / 345x70 / 300x95 mm
Table size: Ø 700 mm
Rotatable table: 360°
Compressed air connection: 6 - 8 bar
Total power requirement: 3.6 kW
Machine weight approx.: 1900 kg
Machine dimensions: D: 1.5 x W: 1.0 x H: 2.35 m
CIRCULAR SAW SEMI-AUTOMATIC - PROFILE CIRCULAR SAW MACHINE - UNDERFLOOR SAW
Profile circular saw with two-hand operation
Suitable for cutting materials such as solid steel, pipes, and profiles within the specified cutting ranges.
Gedpfou Nimqsx Abmouk
Cutting speed depends on the material to be cut
Mitre angles: 30° - 45° - 90°
Saw blade feed rate adjustable
Operating pressure / Clamping pressure: 50 bar / 30 bar adjustable
Hydraulic pump: 2.2 kW
Coolant system with pump
Minimal quantity lubrication
Piece counter
Operation via control panel / two-hand operation
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKG5025
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Powerful, large metal bandsaw with a swiveling arm, enabling cuts both perpendicular to the axis of the workpiece and at any angle from -45° left to 60° right. This bandsaw is ideal for cutting pipes, profiles, and solid materials.
Product Features
Material can be fed manually or with any mechanical device, while the blade feed is automatic. The appropriate cutting speed (blade feed rate) is set via the control panel.
The arm is a rigid structure made of profiled cast iron. Drive is transmitted from the electric motor to the blade drive wheel by a maintenance-free worm gear motor. The saw blade is tensioned between two cast iron wheels using a manual tensioner and guided in adjustable carbide roller and sliding guides.
The base is a rigid housing welded from steel plates. Inside, there is a separate coolant tank with an electric pump. The upper part of the base is shaped as a tray to collect coolant and chips generated during the cutting process. The worktable, with a swiveling arm adjustable from -45° to +60°, is attached to the cast iron construction base.
The control panel is mounted on a separate arm. During cutting, the main cutting motion is the movement of the bandsaw blade. The arm's downward speed (cutting speed) is adjusted by a hydraulic cylinder. The feed rate can be set from the saw's control panel.
Two blade speeds are available: 36 and 72 m/min. At the bottom position of the arm (after cutting is completed), the blade drive is automatically switched off. Safety is assured by blade covers and micro-switches that stop the motor after the cutting cycle or if any cover is opened. Additional protection consists of automatic shutdown if the blade breaks.
Technical Specifications
Cutting blade size [mm]: 2715 x 27 x 0.9
Blade tension: mechanical (manual)
Blade speeds [m/min]: 36, 72
Gedpsi D Ddiofx Abmjuk
Arm descent control: stepless - hydraulic cylinder
Vise base height [mm]: 765
Minimum workpiece length in vise [mm]: 100
Power supply: 3-phase 400V
Total power [kW]: S1 100%: 1.5; S6 40%: 2.1
Coolant pump motor power [kW]: 0.025
Weight [kg]: 370
Warranty [months]: 12
User manual: Polish
CE Declaration: yes
Cutting Capacity
| Angle | Round [mm] | Rectangular [mm] | Square [mm] |
|-----|-----|-----|-----|
| 0° | ø250 | 310 x 210 | 240 x 240 |
| 45° R | ø200 | 200 x 140 | 180 x 180 |
| 45° L | ø165 | 185 x 145 | 160 x 160 |
| 60° R | ø120 | 120 x 95 | 100 x 100 |
The price quoted is NET. Price does not include shipping costs.
For more information, please contact us by phone or email. We invite you to explore our offer on our website.
Mažas skelbimas
Austrija
945 km
Ritininiai konvejeriai / stabdymo sistemos
HESSEHESSE Exakt C Standard 3.000
Skambinti
Sąlyga: naujas, Būklė: nauja
Pristatymo laikas: apie 8 savaitės nuo užsakymo
Kilmės šalis: Vokietija
Kaina: 1808 €
Ilgis: 3000 mm
Darbinis aukštis: 820–940 mm
Maksimali apkrova vienam metrui: 300 kg/m
Volelio plotis: 350 mm
Volelio skersmuo: 63 x 3 mm
Ašies skersmuo: 15 mm
Volelių žingsnis: 250 mm
Pateikimo / išvežimo volelių kelias
Su šoniniu vedimu
KITOS ILGIOS:
1 metras
991 €
2 metrai
1 253 €
4 metrai
2 191 €
6 metrai
3 408 €
Kitos ilgios ir volelių plotiai pagal užklausą.
Guodpfxswiq Spj Abmek
(iliustracinė nuotrauka)
Mažas skelbimas
Kaunas
30 km
Juostinis pjūklas
Bomar450SL
Skambinti
Sąlyga: naudotas, Juostinis pjūklas Bomar 450SL. Geros būklės, pridedama dokumentacija. Galima išbandyti Kaune.
Specifikacija:
Modelis: Bomar 450SL
Gsdpfx Aeqk U Rrobmsuk
Jei turėsite daugiau klausimų, mielai atsakysime.
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKBS712SW 20mm 400V
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Profesjonalna, bardzo wydajna i mocna piła taśmowa do metalu z ramieniem odchylanym o 45°. Doskonałe rozwiązanie dla zakładów ślusarskich, produkcyjnych oraz warsztatów rzemieślniczych. Od lat niezrównana, a dzięki przemyślanej konstrukcji i solidnemu wykonaniu stanowi idealne rozwiązanie.
Opis maszyny
Gujdpfew U Skvsx Abmek
Profesjonalna, bardzo wydajna i efektywna piła taśmowa do metalu z ramieniem odchylanym o 45°, model CORMAK BS 712 SW, oparta jest na dopracowanych rozwiązaniach, co czyni ją bezkonkurencyjną w swojej klasie.
Ramię wykonane z profilowanego żeliwa sferoidalnego zapewnia sztywność podczas pracy i tłumi wszelkie drgania. Panel sterowania umieszczony jest na ramieniu przecinarki. Urządzenie cechuje wysoka wydajność i łatwość obsługi. Umożliwia cięcie w płaszczyźnie pionowej oraz w płaszczyźnie prostopadłej do osi ciętego materiału, a także pod dowolnym kątem w zakresie 45° – 90°. Element cięty może być podawany ręcznie lub za pomocą urządzenia podającego. Posuw podczas cięcia jest grawitacyjny, oparty na zasadzie przepływu oleju w dwukomorowym siłowniku hydraulicznym. Odpowiednią prędkość opuszczania ramienia uzyskuje się dzięki zaworowi regulującemu przepływ oleju pomiędzy komorami siłownika hydraulicznego.
Wytrzymała, stabilna i dopracowana konstrukcja, a także ramię wykonane z jednolitego żeliwa gwarantują sztywność i stabilność podczas cięcia, zapewniając precyzję oraz długotrwałą niezawodność. Zastosowanie taśmy o szerokości 20 mm pozwala na przecinanie dużych ilości elementów. Wymaganą prędkość liniową taśmy uzyskuje się przez zmianę przełożenia na kole pasowym pomiędzy przekładnią ślimakową a silnikiem napędowym.
Dane techniczne
Moc silnika: 1,1 kW
Prędkości taśmy: 22/33/45/65 m/min
Zasilanie: 400 V
Wymiary taśmy: 2360×20×0,9 mm
Zakres cięcia: 45°L – 45°P
Waga: 145 kg
Wymiary: 1280x575x1140 mm
Kąt cięcia
0°.....Ø 205.....215×205.....205×205
45° L.....Ø 150.....100×200.....130×130
45° P.....Ø 140.....140×90.....90×90
Podana cena jest ceną netto. Cena nie obejmuje kosztów transportu.
Więcej informacji udzielimy telefonicznie lub mailowo. Zapraszamy do zapoznania się z ofertą na naszej stronie internetowej.
Mažas skelbimas
Austrija
945 km
Juostinis pjūklas
HESSE by BEKA-MAKBMSO 360 CGH NC
Skambinti
Sąlyga: naujas, Condition: new
Delivery time: approx. 14 - 16 weeks from order
Country of origin: Turkey
Price: €45,100
Lease rate: €861.41
Saw frame: double-column guide
Saw blade dimensions: 5200 x 34 x 1.1 mm
Infinitely variable blade speed: 20–100 m/min
Cutting capacity at 0° round: 360 mm
Cutting capacity at 0° square: 360 mm
Cutting capacity at 0° flat: 610 x 360 mm
Cutting capacity at 30° round: 360 mm, square: 360 mm
Cutting capacity at 45° round: 360 mm, square: 360 mm
Cutting capacity at 60° round: 325 mm, square: 265 mm
Working height: 735 mm
Hydraulic motor: 1.5 kW
Main motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2,850 mm
Width: 2,250 mm
Height: 1,870 mm
Weight: 2,400 kg
NC control
Double-column guidance with linear bearings
3° cutting angle
Chip brush
Control panel
Hydraulic feed vise
Hydraulic vise
Hydromechanical blade tension
Inverter
Optical height adjustment
Proximity switch for blade slip detection
Pressure adjustment
Coolant pump
Saw blade
Safety switch
Operating manual in GERMAN or ENGLISH
OPTIONS:
Hydraulic bundle clamping device
Micro-spray system
Laser cutting line
Roller conveyors and saw blades
Gusdpfx Ajwirhxobmok
ALTERNATIVE:
BMSO 360 CGS NC (with servo feed instead of hydraulic feed) €50,900
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKBS-128HDRC 400V
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Bandsäge für Metall mit optimalem Schnittbereich, häufig eingesetzt in Tischlereien, Produktions- und Handwerksbetrieben.
Maschinenbeschreibung
Die CORMAK BS 128HDRC Bandsäge für Metall bietet einen optimalen Schnittbereich und ist speziell für professionelle Anwender konzipiert. Sie zeichnet sich durch Effizienz und eine besonders einfache Handhabung aus. Das beidseitige Schwenken des Sägebügels ist ein großer Vorteil beim Gehrungsschneiden. Trotz kompakter Abmessungen sorgt das hohe Eigengewicht (103 kg) für einen sehr stabilen und vibrationsfreien Betrieb auch beim Schneiden größerer Werkstücke. Das Material kann sowohl manuell als auch automatisch zugeführt werden. Der Sägevorschub erfolgt gravitationsbasiert über einen zwei-Kammer-Hydraulikzylinder mit Ölstrom. Die Steuerung des Sägebügel-Absenkens wird durch ein Ventil geregelt, das den Ölfluss zwischen den Zylindern kontrolliert. Ein gerader Schnitt wird durch ein Lagersystem zur Bandführung gewährleistet. Die Maschinen sind standardmäßig mit einem Endschalter sowie einem nach IP54 zertifizierten EIN/AUS-Schalter ausgestattet. Der schwenkbare Sägebügel ermöglicht das doppelseitige Gehrungsschneiden im Bereich von -45° bis +60°.
Technische Daten
Sägebandabmessung: 1640×13×0,65 mm
Schnittgeschwindigkeit: 23/34/54 m/min
Guedpowq A Dyofx Abmek
Antriebsleistung: 0,55 kW / 400 V
Absenkregelung: stufenlos, hydraulisch
Gehrungsbereich: -45° bis +60°
Abmessungen (L×B×H): 942×442×548 mm
Gewicht: 103 kg
Maximaler Schnittbereich [mm]
Winkel
0° ….. ø125 mm ….. 100×150 mm …. 100×100 mm
-45° ….. ø90 mm ….. 90×75 mm ….. 90×90 mm
+45° ….. ø90 mm ….. 90×75 mm ….. 90×90 mm
+60° ….. ø55 mm ….. 55×55 mm ….. 55×55 mm
Serienausstattung
- Hydraulikzylinder der 3. Generation
- Tisch für Vertikalschnitte
- Schnellspann-Schraubstock
- Kühlmittelsystem
- Werkstückanschlag
- Automatische Endabschalter
- Moderner Motorthermoschutz
- Fahrgestell mit vier Lenkrollen
- Bedienungsanleitung
Der Preis versteht sich netto. Versandkosten sind nicht im Preis enthalten.
Für weitere Informationen stehen wir Ihnen telefonisch oder per E-Mail zur Verfügung. Besuchen Sie auch unser Online-Angebot auf unserer Webseite.
Mažas skelbimas
Austrija
945 km
Juostinis pjūklas
HESSE by BEKA-MAKBMSY 360 CDGH
Skambinti
Sąlyga: naujas, Condition: New
Delivery time: approx. 14–16 weeks from order
Country of origin: Turkey
Price: €29,000
Leasing rate: €553.90
Saw frame: Double-column guide
Saw blade dimensions: 5000 x 34 x 1.1 mm
Blade speed: Infinitely variable, 15–120 m/min
Cutting capacity at 0° round: 360 mm
Cutting capacity at 0° square: 360 mm
Cutting capacity at 0° flat: 640 x 360 mm
Cutting capacity at 45° round: 360 mm, square: 360 mm
Cutting capacity at 60° round: 250 mm, square: 250 mm
Working height: 860 mm
Hydraulic motor: 1.1 kW
Main motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 3,000 mm
Width: 1,850 mm
Height: 2,000 mm
Weight: 1,950 kg
Hydraulic vice
Digital angle display
Hydraulic clamping of the saw arm
Manual rotation of the saw arm
Continuously adjustable saw arm lowering speed
Automatic saw frame lift after cutting cycle
Guodpfxewiq I Ro Abmek
Sensitive feed pressure regulation depending on material properties
Hydromechanical blade tension with pressure gauge display
Mobile control panel
Helical-bevel heavy-duty gearbox
Powered chip removal brush
Blade guides with carbide plates and rollers
Automatic blade breakage protection
Coolant system
HYDRAULIC LIFTING OF THE SAW FRAME
Operating manual in GERMAN or ENGLISH
(Sample image – roller conveyor as shown is optionally available at additional cost)
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKBS-530
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Powerful band saw, featuring a pivoting arm adjustable from -45° to +60°, portable quick-action vise, blade tension gauge, and hydraulically lowered arm with stepless adjustment. Additionally equipped with an ergonomically designed control panel ensuring safety and user comfort. Maximum cutting width is 490 mm.
Distinctive features of the band saw include:
- The blade tension wheel is fitted with a dial gauge tension meter, providing precise tension indication for optimal cutting results and blade longevity.
- The saw frame is rigid, manufactured from cast iron, and resistant to torsion. High-quality drive wheels, fitted inside the frame, support the cutting blade.
- The control panel is ergonomic, with clearly marked buttons for main power, start, stop, coolant activation, and blade speed selection (slow/fast). An emergency stop button is also present, compliant with the latest EU safety standards.
- The hydraulic cylinder control is mounted on the panel column, allowing precise adjustment of the arm lowering speed and activation.
- The drive system is stable thanks to high-grade, hardened, and ground gears. The powerful motor is proportionally matched to the material being cut.
- Blade guidance is secure with bearing guides, adjustable to the width of the workpiece.
- An auto-stop feature automatically cuts power when the arm reaches its lowest position.
- The vise is robust, reliably clamping workpieces; a material stop is included.
- The hydraulic cylinder is reinforced, enabling precise arm lowering speed adjustment via a potentiometer. The arm swivels from -45° to +60°, with lifting force adjustable by a spring.
- An efficient coolant system is integrated into the saw base.
- Workpieces can be rapidly clamped in the vise, which can be re-positioned to either side for angled cutting.
- The package includes a coolant collection pan with pump.
- The saw’s solid body is cast iron, guaranteeing stability during operation.
- The saw arm can be locked in place.
- The base is rigid, allowing work at approximately 95 cm height – standard configuration with the machine.
Additional advantages:
Other features include adjustable blade speed (35/70 m/min), quick-release vise, pivoting arm from -45° to +60° with scale readout, a full-featured unit with excellent value for money, a robust construction for precise, smooth, vibration-free operation, continuously adjustable hydraulic arm lowering, durable carbide roller guides, reinforced bronze worm gearbox, automatic end-stop, and coolant system as standard equipment.
Technical specifications:
Working height – 870 mm
Cutting speed – 35/70 m/min
Band saw blade dimensions – 3770 x 34 x 1.1 mm
Gjdpfsv R Tgtox Abmsuk
Band saw blade width – 34 mm
Coolant system pump power – 0.1 kW
Total power – 2.8 kW
Voltage – 400 V
Dimensions (W x D x H) – 2200 x 1400 x 1500 mm
Weight – 630 kg
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Austrija
945 km
Juostinis pjūklas
HESSE by BEKA-MAKBMSO 230
Skambinti
Sąlyga: naujas, Būsena: naujas
Pristatymo laikas: apie 14–16 savaičių nuo užsakymo
Kilmės šalis: Turkija
Kaina: 8 700 €
Lizingo įmoka: 167,91 €
Pjūklo rėmas: pasukamas rėmas
Juostinio pjūklo matmenys: 2730x27x0,9 mm
Juostos greitis tolygiai reguliuojamas: 35–70 m/min
Pjovimo našumas 0° apvalus: 230 mm
Pjovimo našumas 0° kvadratinis: 230 mm
Pjovimo našumas 0° plokščias: 240x230 mm
Darbinis aukštis: 590 mm
Hidraulinio variklio galia: 0,37 kW
Variklis: 1,3 kW
Aušinimo siurblio variklis: 0,12 kW
Ilgis: 1700 mm
Plotis: 800 mm
Aukštis: 1500 mm
Svoris: 530 kg
Drožlių šepetys
Godpfx Abowiqw Esmeuk
Valdymo pultas
Aukščio reguliavimas jungikliu
Hidromechaninis juostos įtempimas
Mechaninis viršutinis prispaudimas
Medžiagos ilgio ribotuvas
Aušinimo siurblys
Pjūklo juosta
Apsauginis jungiklis
1,2 metro ritininis transporteris
Eksploatavimo instrukcija VOKIEČIŲ arba ANGLŲ kalba
PASIRINKTINAI:
Ritiniai ir pjūklų juostos pagal užklausą
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKBS260G
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Horizontal band saw with swiveling arm for cutting metals, allows cutting in a plane perpendicular to the axis of the material being cut and at any angle from 0 to 60º. Material can be fed manually or with any mechanical feeder, with automatic tool feed. The blade guides are equipped with dedicated carbide plates and bearings. This significantly impacts blade guidance, its durability, cutting straightness, accuracy, and quality.
The machine arm is made of cast iron profile. The control panel is located next to the arm. Power from the electric motor to the drive wheel of the saw blade is transmitted by a worm gear motor. The saw blade is tensioned over two cast iron wheels by a manual tensioner and guided by an adjustable rolling and linear carbide guide set. Inside, there is a separate coolant tank with electro-pump. The arm lowering speed (cutting speed) is adjustable via a hydraulic cylinder. Feed speed is controlled from the control panel. Two cutting blade speeds are available: 36 and 72 m/min. In the rest position (after cutting), the blade drive is automatically disengaged. Safety is ensured by blade guards and microswitches that stop the motor upon completion of the cutting cycle or opening any guard; an additional protection is automatic saw switch-off in the event of a broken blade.
Technical data:
Band saw dimensions: 2455×27×0.9 mm
Blade tension: mechanical (manual)
Blade speed: 36, 72 m/min
Feed speed: 0–50 m/min (stepless feed)
Arm lowering control: stepless – hydraulic cylinder
Vice base height: 900 mm
Power supply: 3-phase 400 V
Gsdpevuf S Nefx Abmsuk
Motor power: 1.1 kW
Weight: 216 kg
Warranty: 12 months
Manual operation: yes
CE declaration: yes
Cutting capacity (angle – round/square/rectangular):
0º: ø230 / 225×225 / 260×150 mm
45º: ø165 / 165×165 / 180×130 mm
60º: ø105 / 110×110 / 100×90 mm
*Please note: the machine is sold by default without a CEE connector, as there are several types available. If you would like to receive one with your machine, please contact the seller before purchase or when placing your order.
Mažas skelbimas
Austrija
945 km
Juostinis pjūklas
HESSE by BEKA-MAKBMSY 360 DGH ECO
Skambinti
Sąlyga: naujas, Būklė: nauja
Pristatymo laikas: apie 12–14 savaičių nuo užsakymo
Kilmės šalis: Turkija
Kaina: 16 700 €
Lizingo įmoka: 320,64 €
Pjūklo rėmas: pasukamas rėmas
Pjūklo juostos matmenys: 4800x34x1,1 mm
Gsdpfjw Np N Esx Abmeuk
Juostos greitis: bepakopis reguliavimas, 15–120 m/min
Pjovimo pajėgumas 0° apvalus: 360 mm
Pjovimo pajėgumas 0° kvadratas: 360 mm
Pjovimo pajėgumas 0° plokščias: 510x360 mm
Pjovimo pajėgumas 45° apvalus: 360 mm, kvadratas: 360 mm
Pjovimo pajėgumas 60° apvalus: 250 mm, kvadratas: 220 mm
Pjovimo pajėgumas -60° apvalus: 280 mm, kvadratas: 260 mm
Darbinis aukštis: 860 mm
Hidraulinio variklio galia: 0,37 kW
Pagrindinio variklio galia: 3 kW
Aušinimo siurblio variklio galia: 0,12 kW
Ilgis: 2650 mm
Plotis: 1210 mm
Aukštis: 1870 mm
Svoris: 1450 kg
Hidraulinis spaustuvas
Inverteris bepakopiam juostos greičiui
Bepakopė pjūklo svirties nuleidimo greičio reguliacija
Hidromechaninė juostos įtempimo sistema
Valdymo pultas
Drožlių šepetys
Aušinimo įranga
Naudotojo instrukcija vokiečių arba anglų kalbomis
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKBS-128HDRC 230V
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Piła taśmowa do metalu o optymalnym zakresie cięcia, powszechnie stosowana w zakładach stolarskich, produkcyjnych i rzemieślniczych.
Opis maszyny
Piła taśmowa do metalu CORMAK BS 128HDRC z optymalnym zakresem cięcia, przeznaczona dla profesjonalistów, wyróżnia się wysoką wydajnością i łatwością obsługi. Dużą zaletą w cięciu pod kątem jest możliwość obracania ramienia w obie strony. Pomimo niewielkich gabarytów duża masa własna (103 kg) zapewnia stabilność i brak wibracji podczas cięcia większych materiałów. Cięty element może być podawany ręcznie lub za pomocą podajników. Opuszczanie ramienia podczas cięcia odbywa się grawitacyjnie, z przepływem oleju w dwukomorowym cylindrze hydraulicznym. Regulacja opuszczania ramienia realizowana jest poprzez zawór sterujący przepływem oleju między komorami cylindra. Dokładne cięcie zapewnia zestaw łożysk prowadzących taśmę tnącą. Maszyny wyposażone są w wyłącznik krańcowy oraz włącznik/wyłącznik zgodny z normą IP54. Obracana rama piły umożliwia dwustronne ukosowanie w zakresie -45° do +60°.
Dane techniczne
Wymiary taśmy tnącej: 1640×13×0,65 mm
Prędkość cięcia: 23/34/54 m/min
Moc: 0,55 kW/230V
Regulacja opuszczania ramienia: bezstopniowa, za pomocą cylindra hydraulicznego
Zakres cięcia: -45° do +60°
Wymiary: 942×442×548 mm
Waga: 103 kg
Maksymalny zakres cięcia [mm]
Kąt
Gsdpemrp Tlofx Abmjuk
0°.....ø125 mm.....100×150 mm....100×100 mm
-45°.....ø90 mm.....90×75 mm.....90×90 mm
+45°.....ø90 mm.....90×75 mm.....90×90 mm
+60°.....ø55 mm.....55×55 mm.....55×55 mm
Wyposażenie standardowe:
Trzeciej generacji cylinder hydrauliczny
Stół do cięcia w pionie
Szybkomocujący imadło
Układ chłodzenia
y ogranicznik oporowy detalu
Automatyczne wyłączniki krańcowe
Nowoczesne zabezpieczenie termiczne silnika
Mobilna podstawa na czterech kołach
Instrukcja obsługi
Podana cena jest ceną netto. Cena nie zawiera kosztów wysyłki.
W celu uzyskania dalszych informacji prosimy o kontakt telefoniczny lub mailowy. Zapraszamy do zapoznania się z ofertą na naszej stronie internetowej.
Mes supaprastiname jums paiešką
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.









































































































































































































