Juostinis pjūklas

CORMAK BS260G

Sąlyga: naudotas, Gamybos metai: 2025, Horizontal band saw with swivel arm for metal cutting, enables cutting in a plane perpendicular to the axis of the material as well as at any angle from 0 to 60º. The material can be fed manually or with any mechanical feeder, with automatic tool feed. Saw blade guides are equipped with dedicated carbide inserts and bearings, ensuring excellent blade tracking, durability, straightness, accuracy, and cutting quality. The machine arm is made from profiled CAST IRON. The control panel is located next to the arm. The drive from the electric motor is transmitted to the band wheel via a motor with a worm gearbox. The cutting band is tensioned on two cast iron wheels with a manual tensioner and guided by an adjustable rolling and linear carbide guide set. An independent coolant tank with an electric pump is built in. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. Feed rate is controlled via the control panel. Two cutting speeds are available: 36 and 72 m/min. In the rest position of the arm (after cutting), the sawband drive is automatically switched off. Safety is provided by blade guards and microswitches that stop the motor at cycle end or when any cover is opened; additional protection includes automatic saw shutdown in case of blade breakage. Technical data Saw band dimensions: 2455×27×0.9 mm Band tension: mechanical (manual) Band speed: 36, 72 m/min Feed speed: 0–50 m/min (stepless feed) Arm lowering control: stepless – hydraulic cylinder Vice base height: 900 mm Power supply: 3-phase 400 V Motor power: 1.1 kW Chodpfxoxn Itrs Admsf Weight: 216 kg Warranty: 12 months Manual: yes CE Declaration: yes Cutting capacities: Angle | Round (ø) | Rectangle (mm) | Square (mm) 0º | 230 | 260×150 | 225×225 45º | 165 | 180×130 | 165×165 60º | 105 | 100×90 | 110×110 *Please note: The machine is supplied by default without a CEE connector as there are many different standards. If you require one, please contact the seller before purchase or during order placement. ATTENTION! THE MACHINE COMES FROM A RETURN, HAS BEEN SERVICED, NO PACKAGING.

Sąlyga: naujas, Gamybos metai: 2025, Cutting diameter 335 mm Saw band length 4400 x 34 x 1.1 mm Table height 750 mm Feed rate 5 – 2300 mm per stroke Cutting range at 90 degrees: flat 500 x 335 mm Cutting range at 45 degrees: round 330 mm Cutting range at 45 degrees: flat 320 x 335 mm Cutting range at 45 degrees: round left 305 mm Cutting range at 45 degrees: flat left 305 x 335 mm Cutting range at 30 degrees: round 180 mm Cutting range at 30 degrees: flat 170 x 335 mm Chsdpfx Aoulnb Djdmsf Cutting speed 15 – 150 m/min Workpiece weight max. 250 kg/m Total power requirement 3.0 kW Machine weight approx. 2550 kg Space requirement approx. 4350 x 2300 x 1900 mm Standard equipment of the MEBAeco 335 DGA-2300: - CE-compliant access protection with light barrier - MEBA automatic bandsaw in proven twin-column linear design and integrated MEBA gripper feed system, feed range 5 – 2300 mm per stroke - MEBA visualized program input with CNC control Fully automatic operation at any angle setting 30° – 135°, length and quantity. User-friendly program creation and management of up to 255 programs. Operators enter the sawing task into the display mask using a cutting diagram. Input errors are minimized, ensuring simple and reliable creation of production jobs by different operators. - MEBA High-Performance Package: Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring. This ensures optimal conditions for every sawing task, i.e. constant pressure for solid materials and constant feed for thin-walled profiles. - Fast and precise material length feed via rack and pinion and AC drive with max. stroke length of 2300 mm, with integrated roller conveyor up to 3000 mm. - Both sides of the gripper feed vices can be opened. Ribbed strips for heavy material transport. - Saw frame made of heavy-duty, vibration-damping steel welded construction. - Saw band inclined 3° to material support surface for maximum cutting performance and blade life when sawing structural steel profiles. - Combination saw band guide, precision bearings to protect the saw band in the return section. Chamfered carbide slide guides for saw band guidance. - Miter rotation point (zero point) is the intersection between saw band and fixed vice—no change in length dimension when changing the miter angle. Automatic compensation of kerf width at every angle position. - NC angle programming. Control panel is stand-alone (standard for these machines). - Patented double miter vice system (ERP No.). Automatic positioning of vices: The material clamping vice automatically travels along the cutting direction according to the desired miter, ensuring the material is always squared and clamped close to the saw band. Clamping via full-stroke cylinders. - Rapid approach lowering of the saw frame via automatic height control bar until just before the material. In series cutting, the saw frame moves just above the material, allowing fast positioning of the next section—optimal cycle times in single and series cutting. - AC frequency-controlled saw band drive, infinitely variable 15 – 150 m/min. - Backlash-free preloaded, low-maintenance linear recirculating ball guides on material feed and saw frame feed for smooth, jerk-free operation.

Sąlyga: naudotas, Saimp KS lathe for metal. Chodpfxsv Sth Ho Admef Maximum workpiece length: 1000 mm

Sąlyga: naujas, Optimum OPTIdrill D 23Pro (400 V) Promotional Set Bench Drill 3003020SET With V-belt drive. TECHNICAL DATA Dimensions and Weights Length (product): approx. 680 mm Column diameter: 73 mm Width/Depth (product): approx. 350 mm Height (product): approx. 1015 mm Weight (net): approx. 63.5 kg Drilling Capacity Drilling capacity steel (S235JR): 25 mm Continuous drilling capacity steel (S235JR): 20 mm Drill Table Drill table working surface length: 280 mm Drill table working surface width: 245 mm Drill table T-slot size: 12 mm Drill table rotation: 360° Drill table tilt: 45° Distance spindle - drill table max.: 425 mm Speed Range Speed range: 200 – 2440 rpm Number of speed steps: 12 Electrical Data Drive motor power: 0.75 kW Connection voltage: 400 V Mains frequency: 50 Hz Machine Base Distance spindle - machine base max.: 618 mm Chsdpfx Adjt N Ivvsmef Machine base working surface length: 240 mm Machine base working surface width: 250 mm Machine base T-slot size: 16 mm Machine base number of T-slots: 2 Machine base T-slot spacing: 170 mm Spindle Quill stroke: 80 mm Spindle taper: MT2 Throat: 180 mm SCOPE OF DELIVERY Keyless drill chuck 1 - 16 mm Morse taper MT2/B16 T-slot nuts Machine vice BMP

Sąlyga: beveik kaip naujas (parodų įrenginys), A demonstration metal band saw with base, quick-release device, and coolant system. Cutting capacity: Round / Rectangular / Flat 90°: 220 / 220x220 / 250x155 mm Round / Rectangular / Flat 45°: 160 / 160x160 / 160x100 mm Round / Rectangular / Flat 30°: 100 / 100x100 / 100x85 mm Cutting speed: 32 / 66 m/min Codpspgmkyofx Admjhf For further technical data, please refer to the PDF document. Technical data and dimensions are subject to change and errors excepted.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, spindle moulder with tilting spindle, model SCM T160 L’Invincibile demonstration machine spindle tilt electrically adjustable -5° / +45° electric spindle lift motor power 5.5 HP spindle diameter 50 mm voltage 380/50 net weight 1000 kg Chodevzghrepfx Admef

Sąlyga: naudotas, Gamybos metai: 2001, Technical data: Tool holder: SK 40 Chodpst Hr Ahofx Admsf Travel distances: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. tool weight: 260 kg Spindle speed: 12,000 rpm Max. table load: 380 kg Weight, approx.: 6,500 kg Dimensions (LxWxH), approx.: 2,000 x 2,200 x 2,400 mm Equipment: - Heidenhain TNC 430 control - 4th axis by SMP (France)

Sąlyga: paruoštas naudoti (naudotas), Migatronic MTE 440 TIG AC / DC welding machine for steel and aluminium. Water cooling unit: Migatronic CTU 3000. The maximum welding current is 440 A. Tested by EWM Service. You are welcome to schedule a viewing appointment. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. If you have any questions, please feel free to contact us by phone. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description of the products only. Chsdsh Ib Idepfx Admef Deviations from technical specifications and errors in the item description may occur and are reserved. Shipping is exclusively to businesses – for private consumers, collection is the only option.

Sąlyga: naujas, Ex-display promotion. NEW. No. 1 available for immediate delivery. CE warranty. The MACC SPECIAL 335 MS is a semi-automatic bandsaw designed for cutting solid bars and small-section profiles, offering high performance and excellent precision. Its robust construction provides the rigidity and accuracy required for the cutting unit. The blade drive features a dual-speed motor and a special gearbox with a bronze gear and a hardened, ground worm screw. Adequately sized flywheels and robust blade guides, equipped with sealed bearings and adjustable carbide plates, ensure reliable operation. Blade tensioning is managed via an electromechanical micro-switch by rotating the blade. The machine is fitted with safety devices on the flywheel covers and the blade, and includes a swiveling worktable for material support and a vice with rapid approach function. Operation: The cutting cycle is started with a start button, and the machine will: 1. Close the vice and start the blade motor; 2. Lower the saw bow to perform the cut; 3. Return the bow to the starting position; 4. Stop the blade motor; 5. Open the vice. Manual cutting mode available. Cutting speed (m/min): 38-77 Cutting thickness (mm): 1.2 Miter cutting range: From 45° left to 60° right Adjustable stop for repeat cuts Electropump for blade coolant: 0.06 kW Cutting capacity at 0° (Round / Square / Rectangle): 260 / 250x250 / 220x330 mm Cutting capacity at 45° left (Round / Square / Rectangle): 225 / 210x210 / 160x225 mm Cutting capacity at 45° right (Round / Square / Rectangle): 215 / 200x200 / 160x210 mm Cutting capacity at 60° right (Round / Square / Rectangle): 130 / 130x130 / 130x140 mm Blade dimensions: 3010x27x0.9 mm Weight [kg]: 415 Chjdpfjg S Ui Asx Admsf

Sąlyga: paruoštas naudoti (naudotas), Fanuc 6 ašių robotizuotas frezavimo centras aliuminiui ir plienui. Roboto X judėjimas: 10 500 mm. Pratęstas roboto rankos pasiekiamumas (kairėn ir dešinėn): 3 045 mm. Maksimalus ruošinio ilgis profiliui: 15 metrų. Maksimalus ruošinio dydis be pailginto rankos pasiekiamumo: 10 500 x 3 045 mm. Maksimalus ruošinio aukštis: 3 500 mm. 13 pozicijų įrankių keitiklis: - 12 elektrinių įrankių - 1 matavimo zondas. Frezavimo galva: -SK40 - 10 kW ant veleno, 12 000 aps./min. / 15 000 aps./min. - 7,5 kW ant veleno / 18 000 aps./min. - 4 kW ant veleno / 24 000 aps./min, automatinis tepimas. Galimos įvairios konfigūracijos, priklausomai nuo ruošinio tipo. Šiuo metu yra dvi atskiros darbo zonos, tačiau jas galima sujungti į vieną zoną (didelei detalei) arba padalyti į kelias atskiras zonas mažesniems ruošiniams. Chsdpjv Sfk Hjfx Admsf