Singer pirkti naudotą (59)

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Parduodama „Singer 191 D300AA“ pramoninė siuvimo mašina Gbedpfx Aezkr Ekobrsw Parduodu tvirtą ir patikimą „Singer 191 D300AA“ pramoninę siuvimo mašiną. Ši mašina skirta sudėtingiems siuvimo darbams ir pasižymi tvirta konstrukcija bei aukštu našumu, todėl puikiai tinka naudoti kasdien. Idealiai tinka dirbtuvėms, siuvimo įmonėms arba profesionaliam naudojimui. Ši mašina ypač tinkama tiesiems siūlėms siūti ir atlikti tikslius darbus su įvairiomis medžiagomis. Dėl pramoninės konstrukcijos ji yra ilgaamžė, galinga ir puikiai tinka reguliariam naudojimui. Mašina parduodama tokia, kaip parodyta nuotraukose. Pastaba: privatus pardavimas. Garantijos, garantinio aptarnavimo ar grąžinimo nėra. Pardavimas vykdomas atsisakant bet kokios atsakomybės už daikto trūkumus.

Gamybos metai: 1987, būklė: naudotas, Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: 1432, Ši mašina buvo naudojama sferinių varžtų gamybai, jos darbinis ilgis – 5 000 mm. Mašina yra mechaniškai pilna, tačiau parduodama kaip nebeveikianti ir tokios būklės, kokios yra. Trūkstama dalis yra elektrinis valdymo skydas, kuriame yra elektriniai komponentai ir mašinos valdymo sistema. Mašinos pakrovimas į transporto priemonę įskaičiuotas į kainą. Gjdpfx Abe Ai N Uljrebw

Būklė: geras (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 665182, X ašies eiga: 650 mm, Y ašies eiga: 550 mm, Z ašies eigos atstumas: 500 mm, X ašies padavimo greitis: 30 m/min, Y ašies padavimo greitis: 30 m/min, padavimo greitis Z ašis: 30 m/min, bendras aukštis: 2 850 mm, bendras ilgis: 3 300 mm, bendras plotis: 2 400 mm, bendras svoris: 9 000 kg, veleno greitis (maks.): 42 000 aps./min, įrankių magazino lizdų skaičius: 40, Įranga: dokumentacija / vadovas, OPS INGERSOLL SPEED HAWK 650 CNC apdirbimo centras – Svarbi pastaba: 2025 m. velenas buvo pakeistas, kaina – apie 40 000 EUR, todėl veleno darbo laikas yra nedidelis! – Padėklų matmenys: apie 320 x 320 mm – Padėklai tvirtinami ant besisukančio stalo – Tvirtinimo sistema: HSK-E 40 Godpfx Aboy Tvcuersbw – Daugiau techninių duomenų rasite nuotraukose – Su technine dokumentacija – Su HSK-E 40 įrankių laikikliais ir trimis padėklais Dėmesio: prekė turi būti paimta 2026 m. liepos 21–23 d., tiksli data bus nustatyta vėliau. FCA D-73529 Schwäbisch Gmünd – pakrauta į sunkvežimį.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 18 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 574525, X ašies eiga: 420 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 400 mm, bendras ilgis: 3 500 mm, bendras plotis: 2 100 mm, stalo apkrova: 500 kg, „Gantry Eagle 400“, komplekte su „MultiChange Light“ manipuliavimo sistema, pagaminta 2024 m. Gbsdpfx Asz Dazdobrow Serijos numeris: 574525 Manipuliavimo sistemos serijos numeris: 583328 Bendras svoris: apie 6000 kg, įskaitant manipuliavimo sistemą Įdiegimas: 2024 m. balandžio mėn. Priedai: „MultiChange Light“ manipuliavimo sistema, 70 elektrodų ir 8 padėklų Mašina parduodama kliento pavedimu. Patrauklus pasiūlymas – lankstus ir be rūpesčių Mes siūlome ne tik aukštos kokybės produktą, bet ir individualizuotas finansavimo galimybes, pritaikytas jūsų poreikiams. Nesvarbu, ar tai būtų avansas, mokėjimas dalimis, ar individualūs finansavimo modeliai – kartu rasime tinkamiausią sprendimą. Pageidaujant, perimame visą transportavimo organizavimą. Nuo planavimo iki patikimos pristatymo užtikriname sklandų ir laiku atliktą procesą, kad jums nereikėtų jaudintis dėl nieko. 📞 Kreipkitės į mus, jei norite gauti daugiau informacijos ar nekeliantį įsipareigojimų pasiūlymą. Mes suteiksime jums asmeninę ir kompetentingą konsultaciją. Pasiliekame teisę atlikti tarpinius pardavimus, keisti ir klaidotis!

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking Used: Hot-dip Galvanised Bolted System Scope of Delivery: - 4 double-sided uprights, height 3,500 mm, each with 1,200 mm base plates - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre-to-centre distance - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed Description: - Robust steel construction made of IPE sections - Surface of all components hot-dip galvanised - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, each with 1,200 mm depth, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Professional telephone consultation Godsmkixwepfx Abrobw - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. The material is properly packaged to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, suitable for dowelling, and able to absorb the applied loads. Floor structure and load-bearing capacity, as well as any necessary official approvals, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany Gsdpjqt Dmyjfx Abrebw - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Būklė: naudotas, Gamybos metai: 2013, valdiklių gamintojas: Sonstige, valdiklio modelis: Andronic 3060, _____ Aprašymas: Veleno vėžė: Gsdpfx Ae Ail Nlobrobw Technologija: motorinė veleno vėžė Sūkių skaičius: 42 000 aps./min. Galia: 17 kW Įrankio laikiklis: HSK-E40 CNC sukiojamas stalas: Technologija: integruota 4-oji/5-oji ašis B ašis: -/+ 110° C ašis: 360° Apdirbamo gaminio matmenys (maks.): ø400 x 380 mm Apdirbamo gaminio svoris (maks.): 250 kg Padėčių užfiksavimo sistema: Parotec Partool Bendroji informacija: Įrankių saugykla: 32 padėtys Greitasis judesys X/Y/Z ašyse: 30 m/min. Įranga / priedai: Atstumo matavimo sistema: tiesioginė X/Y/Z ašyse (stikliniai liniuotės) Apdirbamo gaminio matavimas: matavimo zondas, Renishaw OMP400 Įrankio matavimas: lazeris, BLUM Dulkių nusiurbimas: grafito dulkių nusiurbimas, Keller L-Cut Aušinimo skysčio tiekimo sistema I: minimalus aušinimo skysčio kiekis Aušinimo skysčio tiekimo sistema II: aušinimo skystis purškiamas per veleno vėžę Nustatymo režimas: elektroninis rankinis ratukas Papildoma įranga: veleno aušintuvas Papildomi priedai: įvairios keičiamos platformos ir elektrodų laikikliai

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, veikimo valandos: 1 703 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 550 mm, Y ašies eiga: 850 mm, Z ašies eigos atstumas: 450 mm, ruošinio svoris (maks.): 2 000 kg, bakelio talpa: 800 l, OPS INGERSOLL Gantry Eagle 800 gamybos metai: 2011 Gbedpfx Abjzgt Rmerew poslinkiai: x, y, z 550 x 850 x 450 mm valdymas: Eagle Power Tec elektrodų keitiklis: 20 vnt. 3D zondas 3D zondas ant stalo magnetas: 400 x 200 mm C ašis erowa laikiklis gaisro gesinimo sistema nuotolinio valdymo pultas šaldytuvas įsk. apie 600/700 litrų dielektriko įskaitant stalčių spintą su turiniu dokumentacija mašina prijungta prie elektros vizitacijai

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, veikimo valandos: 20 771 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 010 mm, Y ašies eiga: 1 510 mm, Z ašies eigos atstumas: 700 mm, bendras svoris: 12 500 kg, parduodamas „Ingersoll Gantry 1200“ Pagaminimo metai: 2022 Stalo matmenys: 1630 mm x 1130 mm Maksimali stalo apkrova: 7500 kg Elektrodų keitiklis: 30 pozicijų Bendras svoris: apie 12000 kg Maksimalus dubens aukštis: 650 mm Gbodpfxj Accv Ue Abrsw atskaičius 40 mm FCS plokštę (į kainą neįskaičiuota) Dielektrinės medžiagos aukštis: maks. 610 mm

Būklė: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 665001, X ašies eiga: 700 mm, Y ašies eiga: 550 mm, Z ašies eigos atstumas: 450 mm, X ašies padavimo greitis: 30 m/min, Y ašies padavimo greitis: 30 m/min, padavimo greitis Z ašis: 30 m/min, ruošinio svoris (maks.): 2 000 kg, bendras aukštis: 2 300 mm, bendras ilgis: 3 300 mm, bendras plotis: 2 300 mm, stalo plotis: 700 mm, stalo ilgis: 850 mm, stalo apkrova: 2 000 kg, bendras svoris: 7 700 kg, veleno greitis (min.): 3 000 aps./min, veleno greitis (maks.): 40 000 aps./min, įrankių magazino lizdų skaičius: 40, Įranga: dokumentacija / vadovas, OPS INGERSOLL OPS 650 CNC apdirbimo centras - Darbinio stalo T formos grioveliai: 5 vnt. - T formos griovelių matmenys: 18H12 - Atstumas nuo HSK tvirtinimo lizdo iki darbinio stalo: 550 mm - Pagrindinio veleno tvirtinimo lizdas: HSK-E 40 - Padėties tikslumas TP pagal DIN ISO 230-2: 0,005 mm - Pakartotinio padėties tikslumas: 0,002 mm - Daugiau techninių duomenų rasite nuotraukose - Pridedama techninė dokumentacija - Komplekte yra darbo stalas ir priedai, pvz., HSK-E 40 tvirtinimo lizdai, įskaitant įrankius - Darbo stalo matmenys: apytiksliai 1500 x 900 x 1100 mm Dėmesio: prekė turi būti paimta 2026 m. liepos 21–23 d., tiksli data bus sutarta atskirai. FCA D-73529 Schwäbisch Gmünd – prekė pakraunama ant sunkvežimio. Godpfoy Tu Ddox Abrobw

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level. Gsdpfx Asmhhy Nebrsbw

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments Gjdpfsh Ek Dajx Abrjbw - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 520 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 450 mm, ruošinio svoris (maks.): 1 000 kg, OPS Ingersoll Gantry Eagle 500 iškrovos erozijos staklės labai geros būklės. 3R laikymo sistema. Pagaminimo metai: 2017. Apžiūra įmanoma prijungus prie elektros. Godpfx Abox Htfyerobw

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with foot section, usable depth 1,200 mm Gbjdpfxsh R Taqe Abrew - 27 cantilever arms with a usable depth of 1,200 mm, equipped with deflectors - 9 roof supports with a projection of 1,500 mm, pre-drilled for customer-supplied roof construction (*Excludes timber purlins and trapezoidal sheets for roof construction) - Includes longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts re-orderable and extension possible at any time) - (*Available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components’ surfaces are hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (max. snow load 1.85 kN/m², wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (max. snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, 1,200 mm deep, with deflectors = 4 storage levels above each other - Including longitudinal and diagonal bracing with 1,500 mm axle spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load labels C4 in accordance with DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight service with advance delivery notification. Material is packaged for ease of unloading. The foundation must be concrete, level, suitable for doweling, and capable of bearing all imposed loads. Floor conditions and load-bearing capacity as well as any necessary official permits are to be checked and ensured by the customer. The uprights must be anchored to the floor by the customer; wall anchoring is neither required nor recommended. According to trade association guidelines, uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever racking system in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 4,200 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm bay distance (4,000 mm racking length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered, and extension is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Enzian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Per upright: 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per arm: 730 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - Supplied with assembly instructions and load capacity labels C4 according to DIN standard - Professional telephone consultation - Made in Germany Gbedsmidyfepfx Abrsw - Short delivery times - Local pickup available Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is well packaged for easy unloading. Delivery can take place approximately 1–2 weeks after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be made of concrete, level, suitable for doweling, and able to bear the applied loads. The floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional liability association guidelines, it is recommended that the uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Bolted system in hot-dip galvanized version: Ex works price: Gbodpfx Aemhhl Hobrsw Robust steel construction made from IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright fitted with 3 bolt-on cantilever arms, usable depth 1,200 mm, standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Including mounting material (without floor anchors) Complete with assembly instructions and C4 load capacity signs according to DIN standard

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 525 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 450 mm, ruošinio svoris (maks.): 1 000 kg, ruošinio aukštis (maks.): 375 mm, Visapusiškai atnaujinta OPS Ingersoll Gantry 500 „Eagle“ elektroerozinė staklė – puikios techninės ir vizualinės būklės. Ši staklė mūsų įmonėje buvo kruopščiai ir profesionaliai atnaujinta, todėl dabar yra puikios techninės ir vizualinės būklės. Atnaujinimo metu staklė buvo išardyta daugiau nei 70 procentų. Visi svarbūs susidėvintys komponentai buvo atidžiai patikrinti ir, jei reikia, pakeisti, įskaitant, pavyzdžiui, rutulinius guolius ir varomuosius varžtus. Vėliau buvo atliktas išsamus geometrinis matavimas, sureguliavimas ir papildomas patikrinimas naudojant lazerinį matavimo sistemą. Staklių pagrindas ir visa konstrukcija buvo kruopščiai išvalyti. Visi siurbliai buvo išardyti, išvalyti ir atnaujinti. Visos žarnos, įskaitant hidraulines ir pneumatines žarnas, buvo visiškai pakeistos. Be to, staklė vizualiai taip pat yra labai gerai prižiūrėta. Generatorius ir valdymo blokas buvo išvalyti ir techniškai patikrinti. Generatoriaus kondicionavimo įrenginys taip pat buvo išvalytas, kad būtų užtikrintas patikimas aušinimas ir stabilus veikimas. Galiausiai, staklė buvo išbandyta atliekant išsamius erozinius bandymus, atitinkančius OPS Ingersoll kokybės ir bandymų reikalavimus. Staklė yra paruošta nedelsiant naudoti ir puikiai tinka patikimai gamybai. Techniniai duomenys: Ingersoll (OPS Ingersoll) Elektroerozinė staklė OPS INGERSOLL GANTRY EAGLE 500 Pagaminimo metai 2014 Gods Afg H Nopfx Abrjbw Valdymo sistema EAGLE Powertec PC/NC 3060 MultiProg Powertec technologinė programavimo sistema, skirta PC/NC Powertec Easy Burn – greitoji programavimo sistema Powertec Handheld – daugiafunkcis rankinis valdymo įrenginys Rankinis erozinis apdirbimas naudojant Powertec Handheld Didelis greitis – maks. 18 m/min. Generatoriaus galia – 60 amperų, EAGLE Powertec Eismo ribos (X, Y, Z) – 525 x 400 x 450 mm Elektrodų keitiklis – 20 padėčių diskinis keitiklis Darbinis bakas (plotis x ilgis x aukštis) – 770 x 670 x 440 mm Darbinis stalas (plotis x ilgis) – 750 x 650 mm Didžiausia apkrova – 1000 kg Priedai: CO2 gesinimo sistema Integruota kasetinių filtrų sistema Papildoma įranga: Linijinis matavimo sistema visose ašyse (Z serijoje standartinė) 2023-11-09

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm, with base section, 1,200 mm useful depth - 12 cantilever arms, standard, 1,200 mm useful depth - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts re-orderable and expansion possible at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface: hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length: 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Gjdpfx Aomhhx Ijbrjbw Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical way to enable easy unloading. When installed outdoors, the stated load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, and suitable for anchor bolts, and must be able to bear the applied loads. The floor structure, load-bearing capacity, and any necessary official approvals must be checked and provided by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German statutory accident insurance (BG) guidelines, it is recommended that the racking uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Gbedpfx Absmhh Dhersw Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: Gjdpfx Asmhh Anjbrobw 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized Gbedpfxemhhf Sj Abrew - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) Gjdpfx Asmhh Dtsbrjbw - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base sections, 1,000 mm useful depth - 12 cantilever arms, each with 1,000 mm useful depth, standard version - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available and extensions possible at any time) - (*Larger quantities available: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms each with 1,000 mm useful depth - Cantilever arms height-adjustable in 100 mm increments Gsdemhhyajpfx Abrsbw - 3 boltable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total rack length: 4,000 mm - Fastening material included (without floor anchors) - Comes with assembly instructions and C4 load capacity labels according to DIN standards - Expert technical support by phone - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical manner to enable easy unloading. If installed outdoors, load capacities are reduced due to wind and snow loads. The installation surface must be concrete, level, suitable for anchoring, and able to withstand the imposed loads. The client is responsible for verifying and ensuring ground condition, load-bearing capacity, and any necessary official permits. Rack uprights must be anchored to the floor on-site; wall anchoring is neither required nor recommended. According to trade association guidelines, the uprights of the rack should have a minimum overhang of 500 mm above the highest storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: Gsdpfx Abemhh Dzorebw - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Professional telephone support - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Gbedsmhhypopfx Abrow Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.