Barbaric pirkti naudotą (14)

Gamybos metai: 2017, Sąlyga: naudotas, Used machine Kdedpfox Rpgbex Af Ijg Year of manufacture: 2017 The TSRET04 return system from Barbaric is a workpiece return conveyor for edge banding machines. It is the most basic version in the TSRET series and performs the following functions: - Transfers the workpiece at the end of the edge banding machine. - Returns the workpiece to the height of the edge banding machine’s infeed. Functionality: After passing through the edge banding machine, the workpiece arrives on a roller table. Transfer is achieved by belt conveyors running perpendicular to the conveying direction, which rise from the roller table, lift the workpiece, move it sideways, and set it down on a slightly lower roller table. This roller table transports the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven roller track, inclined slightly towards the infeed of the edge banding machine, is connected. A stop at the end of the roller track halts the workpiece. Technical data: - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: up to 11 parts/min Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt: L 2,500 mm x W 800 mm - Roller track: L 2,000 mm x W 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Location: Flörsheim

Sąlyga: geras (naudotas), Keliamoji galia prie -0,5 bar: 150 kg Būklė: labai gera, naudota Ksdpfx Afsx R S U Uj Iedg

Gamybos metai: 2024, Sąlyga: naudotas, Demonstration unit Return System for Edge Banding Machine Maximum part sizes: 2800 x 1300 mm Maximum part size for 4-sided edging: 1300 x 1300 mm (optionally 2400 x 800 mm) Infinitely variable feed speed: 7 – 20 m/min (optionally up to 30 m/min) Synchronization possible with the edge banding machine feed speed (0 - 10V) Electrically driven with frequency inverter and geared motor Lifting function: pneumatic Workpiece detection via sensors Control unit with 3.2" display Height adjustable: 800 - 1000 mm Maximum weight: 60 kg Paint finish: RAL 7035 Kjdpow Sy Tmofx Af Ijdg Conveyor Belt Conveyor belt for return transport of panels Return conveyor speed: 7 – 30 m/min Conveyor width: 800 mm Roller Conveyor Slightly inclined roller conveyor with plastic rollers and stop, for installation after the return conveyor as an outfeed station for the returned panels Roller conveyor width: 800 mm Version 3 for left-running edge banding machine Incl. packaging A… Edge banding machine length 4800 mm – 5300 mm B… Length of return conveyor: 3000 mm C… Length of roller conveyor: 2500 mm Single-lane roller track with extension Conveyor technology RTS Compact piece Installation of an additional freestanding roller track as well as a roller conveyor and lifting unit to support large parts. Using adjustable pivot points, the panels are rotated after transfer and fed back almost straight onto the return conveyor. Pneumatically controlled top pressure Part lengths: 300 – 2400 mm Part widths: 200 – 800 mm Panel thickness: 8 – 35 mm (panels must be self-supporting) These part size recommendations are from Barbaric. Parts with dimensions outside these ranges may not function correctly and may cause issues. Increasing the panel length during face-edge banding may pose a risk of crushing at machine components, on-site items, or hall columns. RTS Compact Ergonomics Package RTS Compact ergonomics package consisting of lifting table and blast table Lifting table dimensions: 1960 x 960 mm Blast table dimensions: 960 x 760 mm Steel frame with integrated air cushion table with air nozzles for easy handling Table liftable pneumatically Location: Garbsen

Gamybos metai: 2025, Sąlyga: naujas, Vacuum Lifter BARBARIC with Swiveling Function, incl. Column-Mounted Slewing Crane Equipment Package consisting of: - Vacuum Lifter uniWood B3-90 Degree - 250 Comfort version, with integrated chain hoist reinforced, Load capacity: 250 kg Suitable for vertical and horizontal transport of flat, standard commercial panels. Kdsdpfx Afec Umfte Ieg Vacuum is generated pneumatically via an ejector. For lifting porous materials (MDF over 8 mm thickness), the reinforced vacuum pump is installed. -- Technical Data -- Lifting speed of chain hoist: 0–10 m/min, continuously adjustable via frequency inverter Lifting height (operating area): 2.0 m Chain length: approx. 3.5 m Operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Net weight: approx. 85 kg -- Safety System -- The lifter is equipped with a vacuum gauge. Load is released using a two-button function - Column-Mounted Slewing Crane BARBARIC Load capacity: 250 kg at the lifting device Consisting of: column, console, and easy-running jib arm. Delivery includes trolley and energy supply system. Construction height: approx. 4.2 m Lower edge of jib arm: approx. 3.5 m Jib outreach: 5 m Slewing range: approx. 250° Slewing and trolley operation by hand Base plate with 700 x 700 mm and mounting material. Delivered with adhesive anchors for concrete floors. Prerequisite for this mounting is a suitably reinforced concrete floor. The structural floor analysis is to be carried out and documented by the customer. Other versions and lengths available upon request.

Sąlyga: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Included: - Option: BARBARIC uniWood comfort control Ksdpfsu R Szajx Af Iodg All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: - BARBARIC column-mounted slewing crane Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Mounting: supplied with adhesive anchors for concrete floor. If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. - New exhibition machine -

Gamybos metai: 2021, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Barbaric Labeling LPS etiketavimo stotys, pagaminimo metai 2021 kiekviena su Godex EZ235I etikečių spausdintuvu Juostinio padavimo stalas, tinkamas automatiniams sandėliams arba plokščių pjovimo staklėms Kdsdpfoxy Afaox Af Isg

Gamybos metai: 2021, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Etiketavimo stotys Barbaric Labeling LPS, pagaminimo metai 2021. Kiekviena su Godex EZ235I etikečių spausdintuvu. Tvirtas stalas, tinkamas automatiniams sandėliams arba nesting tipo CNC staklėms. Kdjdpjxy Ad Asfx Af Ijg

Gamybos metai: 2017, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2170070-182, Barbaric TSRET 02 tvarkymo sistema, pagaminimo metai 2017, didž. keliamoji galia 60 kg, serijos Nr. 2170070-182, su integruotu vakuuminiu griebtuvu, konvejerio juosta, ilgis apie 6 000 mm, plotis apie 800 mm. Kdjdpfoxy Aclsx Af Isg

Gamybos metai: 2017, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S/N 2170259-231,, - Automatinė plokščių sandėliavimo sistema CNC ar plokščių pjovimo staklių aptarnavimui - Keliamoji galia 200 kg Kdedpfx Afsxvmtmo Ijg - Su integruotu vakuuminiu keltuvu - Važiavimo keliai apie 10 m x 27,5 m - Su tinkleline apsauga

Gamybos metai: 2025, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Barbaric column-mounted slewing crane with vacuum lifter - Jib length: 6 m - Construction height: 4.3 m - Load capacity: 250 kg - Comfort control: all functions operated from the handle, lift/lower, tilt, suction/release - Tiltable by 90° - Lifting speed continuously adjustable from 0-10 m/min - Chain length: 3.5 m - 230V, 3x1.5 mm² - Operating pressure: 6 bar filtered, dry compressed air required - Safety system - Reinforced cross beam: Reinforced version for slightly porous and lightly structured panels Further details available upon request. Showroom machine, viewing by appointment possible. Kjdevy Trnopfx Af Ijdg

Gamybos metai: 2024, Sąlyga: naujas, Grąžinimo sistema RTS Compact yra autonominė sistema, kurią galima prijungti prie bet kurios KAM nepriklausomai nuo gamintojo. Perleidimo greitis reguliuojamas tolygiai pagal KAM greitį. RTS Compact tiekiama pilnai su skydine spinta ir yra paruošta naudojimui iškart po pastatymo. Papildomai galima įsigyti „RTS Compact transportavimo technikos plėtinį“ – patogiam detalių pasukimui skersinio briaunavimo metu. Taip pat galima komplektuoti su „RTS Compact ergonomikos paketu“. Konvejerio gale įrengiamas keltuvas ir oro pagalvių stalas. Ši opcija užtikrina ergonomišką darbą. Jungtis prie bet kurio gamintojo KAM Vieno operatoriaus valdymas įmanomas Maksimalus ergonomikos lygis Darbo jėgos sąnaudų taupymas Medžiagas tausojantis transportas Montavimas ~0,5 darbo dienos Sukimo įtaisas smulkiems elementams Konvejeris L 4500 B 800 Vienos juostos volelių linija Valdymas: RTS Compact opcija – valdymo dėžutė Prieinamumas: greitas Sandėlio vieta: Flörsheim Kdjdpfsw Nadmjx Af Ieg

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006621, Max. panel width: 1500 mm Max. panel length: 2200 mm Conveyor length: 13,500 mm Kjdpfxetvrfgo Af Iedg Edge banding machine return conveyor: left

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Naudota briaunų klijavimo staklė iš įmonės likvidacijos STEFANI One Touch - Gamybos metai: 2014 - Įskaitant BARBARIC grąžinimo sistemą, 2016 m. gamybos - Prieinama iš karto Esant klausimams, mielai padėsime. Kdodpfx Afex Tcwfj Iog

Sąlyga: naujas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Kantbandmaschine Hebrock K36 mit SPS-Steuerung, wartungsfreiem und beschichtetem Schnellheizleimbecken mit Vorbereitung für schnellen Leimtopfwechsel. - Touchscreen 10“ - Maximale Kantenstärke 3 mm - Minimale Werkstücklänge 200 mm - Minimale Werkstückbreite 80 mm - Vorschubgeschwindigkeit 10 m/min - Betriebsbereit in ca. 5 Minuten - Max. Anschlusswert 14 kW - Elektrischer Anschluss 400 V / 3 Ph / 50 Hz - Maschinenabmessungen 5250 x 1230 x 1430 mm - Gewicht ca. 1.700 kg Extras • Vorfräskopf Whispercut, Werkstückhöhe 60 mm • Beheizbarer Einlaufanschlag • Radius für Eckenrunder R = 2 mm • Schnellwechselvorrichtung für Motor Eckenrunder • Multi-Radiusziehklinge R2/R1 • 60 mm Werkstückhöhe – Eckenrunden • Trennmittel-Sprüheinrichtung • Reinigungsmittel-Sprüheinrichtung • Schutzsprühkante • Nesting-Vorrichtung • Pneumatische 3-Punkt-Verstellung • Multiwerkzeug (R2/R1/Fase) • LED-Innenbeleuchtung • Einrichtung für kurze Werkstücke • Vorbereitung für Rückführsystem (barbaric) • Achspaket / motorische Höhen-, Kanten- und Vorfräsverstellung Kjdowyu E Uepfx Af Isdg • Zusätzliche Werkstück-Ein- und Auslaufunterstützung (je 450 mm)